Prism 2.5 driver for Netra T1 200 at Solaris 10 - newbie
Did anybody compile driver for a Prism 2.5 wi-fi card on Solaris 10?
Please help. [email protected]
Hello,
thanks for help.
In order to change the scsi initiator on one of the two machines, I need the path of both interfaces.
Since now I changed it not.
As I know you do the following:
- switch off one server
- set auto-boot? to false
- reset-all
- probe-scsi-all
after that you have the path of both scsi interfaces. With that info you perform a nvedit and set the id of one machine for example to 6.
But I thought that regardless of the scsi id, I should be able to do a probe-scsi-all.
Was this a mistake from me?
Similar Messages
-
Hi,
I bought a HP CALCPAD 200 this morning.
I do not find the driver on HP website (windows 7 version)
The user's guide gives a broken link for drivers : http://drivers.hpcalculating.com.
On HP support website, I do not find any driver for HP CALPAD 200 !
HP support has removed the driver for this product ?
Could you please help me ?
Thanks
Best regards and Merry Christmas to allHi,
You can post your question on this forum:
http://h30499.www3.hp.com/t5/Calculators/bd-p/bsc-408
HTH
Note: I do not work for HP, I just like playing with calculators :-) -
Problems with driver for ATI xpress 200
Hi all,
this morning I saw that there is KDE4 available. Straight away I installed the packages, run it and it crashed. There was a funny graphical effect just before the crash. This gave me the impression that the problems comes from the graphical driver. I tried the proprietary ATI driver which hangs once kdm is launched. Then I tried VESA which doesn't even start for some funny reason. Eventually I turned to the open source ATI drivers. With them I'm running KDE in resolution 1280x768 which is somewhat strange. So far, I haven't found a solution and think I need a help.
Here is my xorg.conf
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "ATIScreen" 0 0
#Screen 0 "VesaScreen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/speedo"
FontPath "/usr/local/share/fonts"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "glx"
Load "bitmap" # bitmap-fonts
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,cz"
Option "XkbVariant" ",qwerty_bksl"
Option "XkbOptions" "grp:rwin_toggle"
EndSection
Section "InputDevice"
#Option "Emulate3Timeout" "70"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
Option "Buttons" "7"
#Option "Emulate3Buttons" "true"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
#Driver "evdev"
#Option "Device" "/dev/input/event4"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "MyMonitor"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "VESA"
Driver "vesa"
EndSection
Section "Device"
Identifier "ATI"
BusId "PCI:1:5:0"
#Option "MonitorLayout" "TMDS"
#Driver "fglrx"
Driver "radeon"
Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "VesaScreen"
Device "VESA"
Monitor "MyMonitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "ATIScreen"
Device "ATI"
Monitor "MyMonitor"
DefaultDepth 24
SubSection "Display"
#Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
#Section "DRI"
# Group "video"
# Mode 0666
#EndSection
And here is the X11 log
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux pctotem40 2.6.26-ARCH #1 SMP PREEMPT Thu Jul 24 22:35:56 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 28 17:15:54 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "ATIScreen" (0)
(**) | |-->Monitor "MyMonitor"
(**) | |-->Device "ATI"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/Type1,
/usr/share/fonts/TTF,
/usr/share/fonts/speedo,
/usr/local/share/fonts,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5950 card 103c,280a rev 10 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1002,5a3f card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1002,5a39 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:12:0: chip 1002,4380 card 103c,2813 rev 00 class 01,06,01 hdr 00
(II) PCI: 00:13:0: chip 1002,4387 card 103c,280a rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4388 card 103c,280a rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4389 card 103c,280a rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:3: chip 1002,438a card 103c,280a rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:4: chip 1002,438b card 103c,280a rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:5: chip 1002,4386 card 103c,280a rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4385 card 103c,280a rev 13 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,438c card 103c,280a rev 00 class 01,01,8f hdr 00
(II) PCI: 00:14:2: chip 1002,4383 card 103c,280a rev 00 class 04,03,00 hdr 00
(II) PCI: 00:14:3: chip 1002,438d card 103c,280a rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4384 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:05:0: chip 1002,5974 card 103c,280a rev 00 class 03,00,00 hdr 80
(II) PCI: 01:05:1: chip 1002,5874 card 103c,280b rev 00 class 03,80,00 hdr 00
(II) PCI: 3f:00:0: chip 14e4,167b card 103c,280a rev 02 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,63), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00001000 - 0x00001fff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd8500000 - 0xd87fffff (0x300000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc8000000 - 0xd81fffff (0x10200000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 63: bridge is at (0:7:0), (0,63,63), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 63 non-prefetchable memory range:
[0] -1 0 0xd8200000 - 0xd84fffff (0x300000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 7: bridge is at (0:20:4), (0,7,7), BCTRL: 0x0002 (VGA_EN is cleared)
(--) PCI:*(1:5:0) ATI Technologies Inc RS482 [Radeon Xpress 200] rev 0, Mem @ 0xc8000000/27, 0xd8500000/16, I/O @ 0x1100/8
(--) PCI: (1:5:1) ATI Technologies Inc unknown chipset (0x5874) rev 0, Mem @ 0xd0000000/27, 0xd8510000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[1] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[2] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[3] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[4] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[5] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[6] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[7] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[8] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[9] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[11] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[12] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[13] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[14] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[15] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[18] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[19] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[20] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[21] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[22] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[1] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[1] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[2] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[3] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[4] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[5] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[6] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[7] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[8] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[9] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[10] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[11] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[12] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[13] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[14] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[15] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[18] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[19] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[20] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[21] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[22] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[1] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[5] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[6] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[7] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[8] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[9] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[10] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[11] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[12] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[13] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[15] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[20] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[21] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[22] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[23] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[25] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[26] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[27] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[28] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[29] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[30] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "extmod"
(II) Reloading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 4.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI Radeon X550XTX (RV370) 5657 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI ATI RADEON E2400, ATI RV610,
ATI RV670, ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI ATI Radeon HD 2600 XT AGP, ATI ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini ATI Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI ATI Radeon HD 2600 LE
(II) Primary Device is: PCI 01:05:0
(WW) RADEON: No matching Device section for instance (BusID PCI:1:5:1) found
(--) Chipset ATI Radeon XPRESS 200 5974 (PCIE) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[5] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[6] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[7] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[8] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[9] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[10] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[11] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[12] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[13] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[15] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[20] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[21] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[22] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[23] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[25] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[26] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[27] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[28] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[29] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[30] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[5] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[6] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[7] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[8] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[9] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[10] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[11] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[12] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[13] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[14] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[15] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[23] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[24] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[25] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[26] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[27] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[28] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[29] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[30] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[31] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[32] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[33] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000d8500000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon XPRESS 200 5974 (PCIE)" (ChipID = 0x5974)
(--) RADEON(0): Linear framebuffer at 0x00000000c8000000
(II) RADEON(0): PCI card detected
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(II) RADEON(0): Direct rendering experimental on RS400/Xpress 200 enabled
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 1 PCI interface in multifunction mode, accessible memory limited to one aperture
(II) RADEON(0): Detected total video RAM=131072K, accessible=65536K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 400.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=40000; xclk=40000
(WW) RADEON(0): Proprietary connector found, assuming DVI-D
(WW) RADEON(0): Unknown Connector Type: 8
(WW) RADEON(0): Unknown DDC Type: 8
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x68, DACType-2, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port1: DDCType-0x68, DACType-0, TMDSType-2, ConnectorType-3
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section MyMonitor
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(WW) RADEON(0): No External TMDS Table found
(II) RADEON(0): I2C bus "DVO" initialized.
(II) RADEON(0): I2C device "DVO:RADEON DVO Controller" registered at address 0x70.
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL PAL-M NTSC-J
(II) RADEON(0): Port0:
Monitor -- AUTO
Connector -- VGA
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x68
(II) RADEON(0): Port1:
Monitor -- AUTO
Connector -- DVI-D
DAC Type -- None
TMDS Type -- External
DDC Type -- 0x68
(II) RADEON(0): Port2:
Monitor -- AUTO
Connector -- STV
DAC Type -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
finished output detect: 1
finished output detect: 2
(EE) RADEON(0): No connected devices found!
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(EE) RADEON(0): Using VGA default
in RADEONProbeOutputModes
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Adding Screen mode: 800x600
(II) RADEON(0): Adding Screen mode: 640x480
(II) RADEON(0): Total number of valid Screen mode(s) added: 4
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output VGA-0 using initial mode 1280x768
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd8500000 - 0xd850ffff (0x10000) MX[b]
[1] 0 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xd8400000 - 0xd840ffff (0x10000) MX[b]
[7] -1 0 0xd8a00000 - 0xd8a03fff (0x4000) MX[b]
[8] -1 0 0xd8a09400 - 0xd8a094ff (0x100) MX[b]
[9] -1 0 0xd8a08000 - 0xd8a08fff (0x1000) MX[b]
[10] -1 0 0xd8a07000 - 0xd8a07fff (0x1000) MX[b]
[11] -1 0 0xd8a06000 - 0xd8a06fff (0x1000) MX[b]
[12] -1 0 0xd8a05000 - 0xd8a05fff (0x1000) MX[b]
[13] -1 0 0xd8a04000 - 0xd8a04fff (0x1000) MX[b]
[14] -1 0 0xd8a09000 - 0xd8a093ff (0x400) MX[b]
[15] -1 0 0xd8500000 - 0xd850ffff (0x10000) MX[b](B)
[16] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MX[b](B)
[17] -1 0 0xd8510000 - 0xd851ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[22] 0 0 0x00001100 - 0x000011ff (0x100) IX[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[25] -1 0 0x00002120 - 0x0000212f (0x10) IX[b]
[26] -1 0 0x0000215c - 0x0000215f (0x4) IX[b]
[27] -1 0 0x00002148 - 0x0000214f (0x8) IX[b]
[28] -1 0 0x00002158 - 0x0000215b (0x4) IX[b]
[29] -1 0 0x00002140 - 0x00002147 (0x8) IX[b]
[30] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[31] -1 0 0x00002100 - 0x0000210f (0x10) IX[b]
[32] -1 0 0x00002154 - 0x00002157 (0x4) IX[b]
[33] -1 0 0x00002138 - 0x0000213f (0x8) IX[b]
[34] -1 0 0x00002150 - 0x00002153 (0x4) IX[b]
[35] -1 0 0x00002130 - 0x00002137 (0x8) IX[b]
[36] -1 0 0x00001100 - 0x000011ff (0x100) IX[b](B)
[37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit c8000000 0 0
(==) RADEON(0): Write-combining range (0xc8000000,0x4000000)
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable montype: 1
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0x3fff3800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1920,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1920,1202)
(II) RADEON(0): Largest offscreen area available: 1920 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x11d0000
(II) RADEON(0): Will use depth buffer at offset 0x1a9a000
(II) RADEON(0): Will use 29184 kb for textures at offset 0x2364000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xc8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 8192 kB allocated with handle 0xf8e72000
(II) RADEON(0): [pci] ring handle = 0xf8e72000
(II) RADEON(0): [pci] Ring mapped at 0xb38a5000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf8f73000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb38a4000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf8f74000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xb36a4000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf9174000
(II) RADEON(0): [pci] GART Texture map mapped at 0xb31c4000
(II) RADEON(0): [drm] register handle = 0xd8500000
(II) RADEON(0): [dri] Visual configs initialized
disable montype: 1
init memmap
init common
init crtc1
init pll1
freq: 80140000
best_freq: 80136923
best_feedback_div: 291
best_ref_div: 13
best_post_div: 4
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x3fff3800 0x3fff3800
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
finished PLL1
restore dac
enable montype: 1
(WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
disable montype: 1
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 17
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x3fff3800 is: 0x3fff3800
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0x41ff4000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x3fff3800 0x3fff3800
(II) RADEON(0): MC_AGP_LOCATION : 0x41ff4000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) Option "dpms" "true"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor 0 (scanline 1202)
(II) RADEON(0): Using hardware cursor 1 (scanline 1204)
(II) RADEON(0): Largest offscreen area available: 1920 x 6984
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 203
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us,cz"
(**) Keyboard0: XkbLayout: "us,cz"
(**) Option "XkbVariant" ",qwerty_bksl"
(**) Keyboard0: XkbVariant: ",qwerty_bksl"
(**) Option "XkbOptions" "grp:rwin_toggle"
(**) Keyboard0: XkbOptions: "grp:rwin_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "IMPS/2"
(**) PS/2 Mouse: Device: "/dev/input/mice"
(**) PS/2 Mouse: Protocol: "IMPS/2"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "7"
(==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 11
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
enable montype: 1
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) 3rd Button detected: disabling emulate3Button
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DVI-0:ddc2" removed.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
(II) RADEON(0): Detected non-DDC Monitor Type: 0
Would you know what is the problem?
Many thanks, Jan.The problem WAS the languageset.
This helped
http://oraclespin.wordpress.com/2008/05/01/setting-nls_lang-for-oracle/ -
We need to get a SCSI CDROM drive for this server. Hoping someone can tell me if any such drive would be ok or if we have to target specific models. TIA,
JimHere are the recommended Sun parts for that server:
DVD X6168A
CD 32 X6911A
If the system is currently supported install these products only. -
LabVIEW driver for TECAN or Thermo microplate reader ?
I have to develop a LV program to control a microplate reader (TECAN Infinite 200, or Thermo Electron Varioscan). As anyone some experience on this problem ?
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...Michael.Proctor a écrit:
Hi CC,
I was about to start developing a driver for the Infinity 200 using .Net to add it to my automated Plate Reader LIMS sytem.
We use it to grow yeast cells
I already have connectivety and control to the earlier Tecan Plate Readers ( Genios and Safire) using ActiveX calls to the Tecan RDROLE libraries. It works well, a few memroy leaks aside.
.Net progamming is new to me so I am hoping you may have made a strt that will point me in the right direction - if not I will eventually have something working.
I am alos workign on the Tecan EVO (liquid handling robot ) connectivity.
thanks Michael
Stanford University
Hi Michael,
Most of my projects will be on a stand-by for a few months, and I'm not sure the Tecan program will be among the firsts to be revived . However, your move could be a good trigger for me !
I also got the Tecan libraries but I only had time to give them a quick look. Being a Macintosh afficionado, my feelings about .Net programming are probably the same as those of a chicken for a monkey wrench
However, things can change assuming I have the proper driving force. We also the use the infinity to study yeast growth. What I would like to do is to program the liquid dispenser according to the growth results.
If YOU point me in the right direction, may be we could soon join our efforts ?
Feel free to contact me either here or directly at [email protected]
Cheers
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left... -
Win XP 64 driver for hp laserjet pro 200 color mfp m276nw
Hi, any workaround for using this printer under XP-64?
Maybe driver rename or compatible generic?
Just bought it, unpacked, connected - and found out that XP 64 is not supported.
Now what? Return in disgust and buy Cannon or Minolta again, as they support all OS?Hello sangamon,
Welcome to the HP Forums!
I understand you're looking for a Laserjet 200 color MFP m276nw driver for Windows XP 64 bit. I will do my best to assist you! Have you tried downloading the full feature from the HP website here? This will support your operating system. Please let me know if you have any further questions.
Have a great night!
I worked on behalf of HP. -
Toshiba E-studio 200s driver for Windows 7 64bit
I have printer/scenner /fax e-studio 200s , but there is no driver for my new Windows 7 64bit. I`m searching on Toshiba web site, but no results
Can you help me ?This driver was very hard to find. I have the 200s e studio but the installation cd was lost. it was almost impossible to find this driver, but finally I managed to stumble upon it. So I want to help you all you seekers.
Here is the download link.
http://www.eid.toshiba.com.au/n_driver_es162025.asp
Thanks
+Message was edited: dead link has been replaced+ -
CS6: Windows 7: Driver needed for Monitor Philips 200 WP7
A friend and I have spent about an hour this afternoon trying to get an updated driver for my monitor - Philips 200 WP7. My current driver is 1.0.0.0. I only recently got CS6, and it says I should ideally update my driver. Regrettably Philips doesn't supply a driver for my monitor with Windows 7, only with earlier versions of Windows. Has anyone here updated this driver for Windows 7, and can they recommend anywhere where we can get hold of an update?
Help would be much appreciated.You don't need monitor drivers, the operating system runs it natively (plug'n'play).
What Photoshop is requesting is an updated video card driver. Not that Photoshop won't work without it, but some (minor) features may be disabled. -
I'm trying to find out the largest hard drive the Netra T1 AC/DC 200 will support. All the documentation I come across only lists the "official" sizes. I believe the connector is an 80-pin SCA. Thanks.
Edited by: 838558 on Feb 21, 2011 3:55 PM
Edited by: 838558 on Feb 21, 2011 4:01 PMThere were options for up to 146GB per drive available, but you can get a 300GB in SCA, prepare to pay it at 2$/GB
have a look at Seagate Cheetah 15K.5 SCSI ST3300655LC thats their biggest. -
Installation failed when using Jumpstart Server to install SUN Netra T1 200
I have a problem to install a couple of Sun Netra T1 200 Servers with a Jumpstart Server. The Jumpstart Server is set up and I have executed the add_install_client Script. If I boot the Server which should to be installed the server crashes after getting the assigned IP-Address with a software fault.
Attached i will sent the Jumpstart-Client-Output and the config Files of the Jumpstart-Server.
****Netra T1 Server Output, while configured as an Jumpstart client:****
ok boot net -install
Resetti
LOM event: +2h28m47s host reset
ng ...
`
Netra T1 200 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #16692502.
Ethernet address 8:0:20:fe:b5:16, Host ID: 80feb516.
Executing last command: boot net -install
Boot device: /pci@1f,0/pci@1,1/network@c,1 File and args: -install
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
2ae00 Warning: boot will not enable cache
Requesting Internet address for 8:0:20:fe:b5:16
Enter filename [kernel/sparcv9/unix]:
Enter default directory for modules [platform/SUNW,UltraAX-i2/kernel /platform/sun4u/kernel /kernel /usr/kernel]:
SunOS Release 5.8 Version Generic_108528-13 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
whoami: no domain name
panic[cpu0]/thread=300010a9ba0: Can't invoke , error 2
000002a1000f7a40 genunix:icode+274 (ffbefff0, 0, 300010a7b88, 0, ffbefffc, ffffffffffffffff)
%l0-3: 00000000ffbefffc 0000000000000000 0000000000002000 000002a10000fd20
%l4-7: 0000000000000bb8 0000000010423a00 000000001041b2f8 00000000000007a9
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Resetti
LOM event: +2h36m51s host reset
ng ...
p
Netra T1 200 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #16692502.
Ethernet address 8:0:20:fe:b5:16, Host ID: 80feb516.
Executing last command: boot
Boot device: disk File and args:
SunOS Release 5.8 Version Generic_108528-13 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
configuring IPv4 interfaces: eri0.
Hostname: infrasrv
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s4: is stable.
/dev/rdsk/c1t0d0s6: is stable.
Starting IPv4 routing daemon.
starting rpc services: rpcbind done.
Setting netmask of eri0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway infrasrv
syslog service starting.
Print services started.
Jun 26 04:48:14 infrasrv sendmail[220]: My unqualified host name (infrasrv) unknown; sleeping for retry
volume management starting.
The system is ready.
infrasrv console login: root
Password:
Last login: Thu Jun 26 02:13:59 on console
Jun 26 04:48:24 infrasrv login: ROOT LOGIN /dev/console
Sun Microsystems Inc. SunOS 5.8 Generic Patch October 2001
Sun Microsystems Inc. SunOS 5.8 Generic Patch October 2001
# uname -i
SUNW,UltraAX-i2
# ^[[A
^[[A: not found
# uname -m
sun4u
*****Config Files of the Jumpstart-Server******************
Sysidcfg
bootparams
bash-2.03# more bootparams
infrasrv root=adminws:/cdrom/sol_8_202_sparc/s0/Solaris_8/Tools/Boot install=ad
minws:/export/install boottype=:in sysid_config=adminws:/export/sysidcfg install
_config=adminws:/export/config rootopts=:rsize=32768
bash-2.03#
rules
bash-2.03# more rules
# @(#)rules 1.12 94/07/27 SMI
# The rules file is a text file used to create the rules.ok file for
# a custom JumpStart installation. The rules file is a lookup table
# consisting of one or more rules that define matches between system
# attributes and profiles.
# This example rules file contains:
# o syntax of a rule used in the rules file
# o rule_keyword and rule_value descriptions
# o rule examples
# See the installation manual for a complete description of the rules file.
# RULE SYNTAX:
# [!]rule_keyword rule_value [&& [!]rule_keyword rule_value]... begin profile fi
# nish
# "[ ]" indicates an optional expression or field
# "..." indicates the preceding expression may be repeated
# "&&" used to "logically AND" rule_keyword and rule_value pairs together
# "!" indicates negation of the following rule_keyword
# rule_keyword a predefined keyword that describes a general system
# attribute. It is used with the rule_value to match a
# system with the same attribute to a profile.
# rule_value a value that provides the specific system attribute
# for the corresponding rule_keyword. A rule_value can
# be text or a range of values (NN-MM).
# To match a range of values, a system's value must be
# greater than or equal to NN and less than or equal to MM.
# begin a file name of an optional Bourne shell script
# that will be executed before the installation begins.
# If no begin script exists, you must enter a minus sign (-)
# in this field.
# profile a file name of a text file used as a template by the
# custom JumpStart installation software that defines how
# to install Solaris on a system.
# finish a file name of an optional Bourne shell script
# that will be executed after the installation completes.
# If no finish script exists, you must enter a minus sign (-)
# in this field.
# Notes:
# 1. You can add comments after the pound sign (#) anywhere on a line.
# 2. Rules are matched in descending order: first rule through the last rule.
# 3. Rules can be continued to a new line by using the backslash (\) before
# the carriage return.
# 4. Don't use the "*" character or other shell wildcards, because the rules
# file is interpreted by a Bourne shell script.
# RULE_KEYWORD AND RULE_VALUE DESCRIPTIONS
# rule_keyword rule_value Type rule_value Description
# any minus sign (-) always matches
# arch text system's architecture type
# domainname text system's domain name
# disksize text range system's disk size
# disk device name (text)
# disk size (MBytes range)
# hostname text system's host name
# installed text text system's installed version of Solaris
# disk device name (text)
# OS release (text)
# karch text system's kernel architecture
# memsize range system's memory size (MBytes range)
# model 'text' system's model number
# network text system's IP address
# totaldisk range system's total disk size (MBytes range)
# RULE EXAMPLES
# The following rule matches only one system:
# hostname sample_host - host_class set_root_pw
# The following rule matches any system that is on the 924.222.43.0 network
# and has the sun4c kernel architecture:
# Note: The backslash (\) is used to continue the rule to a new line.
#network 924.222.43.0 && \
# karch sun4c - net924_sun4c -
# The following rule matches any sparc system with a c0t3d0 disk that is
# between 400 to 600 MBytes and has Solaris 2.1 installed on it:
#arch sparc && \
# disksize c0t3d0 400-600 && \
# installed c0t3d0s0 solaris_2.1 - upgrade -
# The following rule matches all x86 systems:
#arch i386 x86-begin x86-class -
# The following rule matches any system:
#any - - any_machine -
hostname infrasrv - infrasrv_class -
hostname msm_srv1 - msm_srv_class -
hostname msm_srv2 - msm_srv_class -
bash-2.03#
class
bash-2.03# more infrasrv_class
install_type initial_install
system_type standalone
partitioning explicit
filesys c0t0d0s0 2048 /
filesys c0t0d0s1 10
filesys c0t0d0s3 1024 swap
filesys c0t0d0s4 2048 /var
filesys c0t0d0s5 2048 /opt
filesys c0t0d0s6 free /export
cluster SUNWCXall
bash-2.03# more msm_srv_class
install_type initial_install
system_type standalone
partitioning explicit
filesys c0t0d0s0 2048 /
filesys c0t0d0s1 10
filesys c0t0d0s3 1024 swap
filesys c0t0d0s4 2048 /var
filesys c0t0d0s5 free /opt
cluster SUNWCXall
bash-2.03#
ethers
bash-2.03# more ethers
8:00:20:fe:b5:16 infrasrv
bash-2.03#
hosts
bash-2.03# more hosts
# Internet host table
127.0.0.1 localhost
192.168.0.220 adminws loghost
192.168.0.210 infrasrv
192.168.0.200 tc
bash-2.03#
dfstab
bash-2.03# more dfstab
# Place share(1M) commands here for automatic execution
# on entering init state 3.
# Issue the command '/etc/init.d/nfs.server start' to run the NFS
# daemon processes and the share commands, after adding the very
# first entry to this file.
# share [-F fstype] [ -o options] [-d "<text>"] <pathname> [resource]
# .e.g,
# share -F nfs -o rw=engineering -d "home dirs" /export/home2
share -d "jumpstart conf dir" /export/config
share -F nfs -o ro,anon=0 /export/install
share -F nfs -o ro,anon=0 /cdrom/sol_8_202_sparc/s0/Solaris_8/Tools/Boot
bash-2.03#
tftpboot
bash-2.03# pwd
/tftpboot
bash-2.03# ls -al
total 348
drwxrwxr-x 2 root other 512 Jun 26 11:45 .
drwxr-xr-x 24 root root 512 Jun 26 11:45 ..
lrwxrwxrwx 1 root other 26 Jun 26 11:45 C0A800D2 -> inetboot.SUN4U.Solaris_8-1
lrwxrwxrwx 1 root other 26 Jun 26 11:45 C0A800D2.SUN4U -> inetboot.SUN4U.Solaris_8-1
-rwxr-xr-x 1 root other 159416 Jun 26 11:45 inetboot.SUN4U.Solaris_8-1
-rw-r--r-- 1 root other 318 Jun 26 11:45 rm.192.168.0.210
lrwxrwxrwx 1 root other 1 Jun 26 11:45 tftpboot -> .
bash-2.03#Hi,
It seems to me that you have not created a proper sysidcfg file. From your post, it looks to me like your sysidcfg contains no entries. This is why it prompts you to enter the kernel path. Look on docs.sun.com for a guide to creating the sysidcfg file . -
CORRECT DRIVER FOR WINDOWS 7 AND HP COLOR LASER JET 4600dn
I'm having a problem with our IT department. My old 4600dn worked great until they started downloading new drivers for Windows 7, which they installed just recently. Now the one he INSISTS I use has only one tray selection.... Auto. I'm trying to print business cards..(absolutely no problem till now).... but he INSISTS that this is the only driver. Then he wants me to choose Pg.....select 1, then MANUAL DUPLEX. That's almost impossible for the printer. I'm almost POSITIVE you have a print driver that will allow me the tray selections I had before he installed Windows 7 and this particular driver. I always used "Tray 1," CURRENT PAGE, it zoomed through the perforated cardstock like a streak!!!! Now, the poor printer is trying to run perforated cardstock through the duplexing unit. Out of 10 pages of cards, I ended up with 1 front printed and 9 pieces of cardstock that stuck in the tray and jammed in the duplexing unit. Is there a CORRECT print driver for this particular printer that will allow all my normal functions to be visible and viable? I don't have the model, nor serial #, as it is work printer and I'm at home now, so I can't get on chat. He is hard to get along with and has been playing games this whole time. I found one driver he inadvertantly left a day and a half ago and printed the cards like lightening, as it used to....7 minutes and I had 200 cards for two different staff members. PLEASE HELP! I think he's leading me down a merry path. It also has to be able to duplex fairly heavy graphic pages...and even the driver he accidently left as an option, won't print the graphics. I just KNOW you have a driver with all the options that will allow it to print to Windows 7 Operating System with all the former options. HELLLLLLLP!
Thanks sooooo much!
Kathi T.
[text removed for privacy]Any suggestions re correct driver for windows 7 and HP 4600dn?
-
Using Current External Hard drive for Time Machine
I just set up Leopard (and it is SLOW right now), and I plugged in my External Hard Drive to set up Time Machine, but it said it had to erase the disk to get started with Time Machine. There is a lot of important stuff on there that I do not want to have to erase. Is there a way to partition my current drive so Time Machine can use that side, and I can keep my other stuff as-is.
I am not real familiar with all the partitioning stuff, so help would be greatly appreciated!Well, WHERE are you going to BACKUP that data while you perform a re-partition???
SubRosa might have your utility...
http://www.subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&cPath=200&productsid=6
But with reliable 500GB Firewire drives well under $200, you should serious consider getting another drive for safety's sake. -
The right external drive for my configuration
I am looking to get an external hard drive for backup purposes and also to extend the storage space of a sorely limited Powerbook G3. It has a 6GB hard drive. In other words, you can't use it for anything except the internet and a few documents!
I've done some research but am no closer to figuring out what drive would be best for me. The thing is, I need the convenience of a portable because I'll be using it for backup with all 3 of the computers in different places in the house (an iBook G4, a Powerbook G3, and an iMac G3). But because I'll be using it for 3 computers and want to store bootable clones of at least my iBook's 60GB drive and the iMac's 20GB drive, I need more storage space than I've seen in portables. I also need to be able to run applications off it for the Powerbook.
I don't think I can afford to get more than one drive, especially since portables seem pretty pricey. I'd really rather not spend more than $150 and definitely not more than $200.
Anyone have any suggestions for the best solution?Hi amybl,
You can get a portable 120-160GB firewire/USB drive for less than you think. OWC's drives are rated highly too.
http://eshop.macsales.com/shop/firewire/on-the-go
John
If your PB is the Firewire model the Firewire 400 (w/o USB) is even cheaper. -
Internal Hard Drive for my macbook
Hi !
I'd like to know where can I buy an internal hard drive for my Macbook, and if there is a seize limit.
I bought the MB on the 05th Nov. 2007 : MB 13" white ; 2.2GHz Intel Core 2 Duo, 2x1Go (667MHz DDR2 SDRAM) [right now] the hard drive is 160Go [FUJITSU MHY2160BH]
I'd like to know where I can buy it (in France if it's possible or on internet)
and if it's possible to get a 500Go
Moreover 7200t/m is better than a 5400t/m but does it use more ? is it noisly ?
I guess that with the on I have right now there is something which protect the hard drive in case of shocks.
Thanks !
M@cmuftThere is no capacity limit on the MacBook but I believe you will need a drive of maximum 12.5mm deep, to be certain I'd try to get a 9.5mm drive. 7,200 rpm drives are usually a little noisier and will use slightly more battery power when running. The "sudden motion sensor" is built in to the computer, not the drive - do be careful when buying your new drive as drives with built in drop protection can cause issue with the SMS in the computer. You can disable the SMS if need, just Google for instructions.
-
Largest Hard Drive for a Ti/800mhz
I am thinking on replacing my 40g with a larger one or even replacing the superdrive with another hd, I was wondering if my Ti will only see a max of 120g like my PM/G4's, I know it will see larger ones using firewire but this is a laptop and using an external hd just don't make since,,,,
I found some new information on this question. I apologize for not discovering it sooner, but I only came across it on the Western Digital website. It appears that any model introduced after June 2002, and the listed models, can handle a larger drive. Mine was introduced in April 2002, and purchased new in September 2002. But...see my notes at the end of this post.
Apple article HT2544 addresses this issue (see (http://support.apple.com/kb/HT2544?viewlocale=en_US#bootrom), as does Western Digital Knowledge Base Answer ID 927 (see http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=927).
+From Western Digital:+
Are EIDE drives larger than 137GB (128GB binary) supported in Mac systems
Question
I am considering buying an EIDE drive larger than 137GB for my Mac system. Are EIDE drives larger than 137GB supported in Mac systems?
Answer
Not all Mac systems can properly support EIDE drives larger than 137GB (128GB binary). In many cases, the system needs to be a newer Mac G4 or G5 system. According to Apple, there are two primary requirements that must be met to support these drives:
The computer must have Mac OS 10.2 or later
The system BootROM must provide support for the drive
For full details, please see Apple Document #86178.
Note: There are third-party controller cards designed for use with large EIDE drives and Macs. Please contact Apple or the card manufacturer to find out if a specific controller card will work with your Mac. According to Apple, you must still have OS version 10.2 or later, even with the controller card, to use the full drive capacity.
+From Apple+:
There are two primary requirements that must be met for higher capacity hard drives to be fully utilized within a computer.
1. The computer must have Mac OS X 10.2 or later.
2. The computer must provide support for the drives via the BootROM.
Products Affected
Mac OS X 10.4, Mac OS X 10.3, Mac OS X 10.2, Mac OS X 10.5
Mac OS X 10.2 or later
The high capacity drive must be formatted using Mac OS X 10.2 or later in order for partition sizes beyond 128 GB to be recognized. If you plan to start the partition up from Mac OS 9.2.2, the partition sizes may be a maximum of 200 GB. If you have a drive that is larger than 200 GB in size, you will need to create multiple partitions with no single partition exceeding 200 GB in size. Once formatted, the drive will be recognized under the version of Mac OS 9.2.2 that comes with the Power Mac G4 (Mirrored Drive Doors) and later products.
If the drive is not formatted using Mac OS X 10.2 or later, the maximum volume size available is limited to approximately 128 GB.
Support via the BootROM
The BootROM of Power Mac G4 (Mirrored Drive Doors), Xserve, Power Mac G5, and any other model introduced after June 2002 can accommodate these larger drives.
For additional details on the volume and file size limitations under OS X, see:
Mac OS X: Mac OS Extended Format - Volume and File Limits
Mac OS X Server 10.0.3 and later: Maximum UFS Partition Size Is Less Than 1 TB
Note that the 2 conditions appear to be in the conjunctive, not disjunctive; i.e., both must be met.
My TiBook doesn't seem to fit the parameters required to recognize larger drives. It was introduced in April 2002, and is not a Power Mac with Mirrored Drive Doors, nor an XServe or Power Mac G5.
However, I bought a 160 GB external hard drive some years ago. Disk Utility recognized it as 160 GB when I connected it via Firewire 400, and successfully partitioned it into 34.44 GB and 114.35 GB volumes, totaling 148.79 GB. This is quite more than the 128 GB limitation that concerns us.
So I wonder: Is an easy test just connecting an external hard drive larger than 128 GB and seeing if the OS recognizes it?
Maybe you are looking for
-
Warning message in me_process_req_cust badi - check method
Hi all, I have implement me_process_req_cust badi and I want to give a warning message in check method. But it doesnt work. When I change the message type to E instead of W, it works. How can I give a warning message in check method? I will be very h
-
I'm behind on my payments due to being laid off, and would love to know what my options are. I've heard financial services can help, but what exactly can they do? Will they help me get my phone back on asap? I love Verizon and would appreciate any ad
-
Operating system not found when deploying to machines with two hard drives using MDT 2013.
Computers with two hard drives will not boot after the install OS step in the task sequence. I get the "An operating system wasn't found. Try removing drives that don't contain an operating system" error. I am able to get the machine to boot by sw
-
Creating anchored objects underneath a textframe?
Hi, I'd like to make a box underneath a textframe and anchor it so that it will move along with a special section of the text. When I anchor the box it is automaticly placed on top of the text wich is not my intension. Also if I place the box in the
-
Do I need Pro to fill out and save forms?
I created a form for my business using Pro-9. What version is required for the end user to open this form, fill out the fields, and save the filled out form?