Priting more then one page in the layout

I can't print anymore more then 1 pages per layout of each printed page!
This happened from leopard. I have upgraded the system, then i did a archive & install trying to solve the problem, but there were no changes.
I can't print even from new just created users

Not sure this will help -- But at first I was not able to print more than one page on my EPSON STYLUS PHOTO R200 printer. When the page opened -- I had the Printer listed in the top Title space. After several attempts, i noticed there was a black arrow next to the Printer name -- I clicked on it to open and all of the application features including setting # of copies appeared. I seem to remember reading something that in Leopard 10.5 Printing is now tied to the application rather than the printer. Maybe this had something to do with it not appearing at first.
Only problem I have now is LEOPARD does not recognize my printer Utility software --for cleaning heads, determining ink levels, etc. I've e-mailed EPSON on this
Pete Collins

Similar Messages

How do I get the text to flow throughout more then one page.

Hello,
I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
I could always send the file to someone to see if they can figure it out.
Thank you,
Natalie

Thank you so much !
but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
Natalie
Date: Wed, 12 May 2010 07:53:12 -0600
From: [email protected]
To: [email protected]
Subject: How do I get the text to flow throughout more then one page.
Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
Thanks
Srini
>

SAP is allowing miro more then one time against the single GRN

Hi All
Sap is allowing Miro more then one time against the GRN. We have done miro twice and it is still open for miro. In normal case after doing miro SAP shows zero value and qty in grn field in miro screen.
i want to ristrict his .
can any body tell me the process
Regards
Prakash

Hi,
Option-1:Use T.Code:OMRM & maintain the message M8 -081 as error,Quantities invoiced greater than goods receipt quantity as error [maintain GR-based IV in the PO item level ]
Option-2:Use T.code: OMRM & Maintain the message M8 -087 - Invoice quantity greater than PO quantity [item without GR] as error.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Jan 29, 2009 1:59 PM

Object would have more then one attribute with the tag :VALUE

I'm creating a new component in Ultiboard - a 100 pin connector. This connector (Hirose) has 4 rows of 25 pins. Alternate rows are staggered. I'm trying to name each pin with it's appropiate name: A1, A2, A3 ....A50. Then B1, B2, B3 .....B50.
When I change the VALUE or NUMBER attribute, I get the DRC error message:
This action cannot be completed because the resulting Object would have more then one attribute with the tag :VALUE
Please remove one of the attributes and try again.
Okay, so I've tried deleting the tag and now I can't name the pin at all.
What am I missing?

You should be in the footprint editor to edit the pin name. Select tools>>Database>>Database Manager, highlight the component in your database and click on the Edit icon. In the footprint editor, double click on the pad and a SMT or THT pin Properties dialog appears, select the Attributes tab and highlight the Number row, press the change button and you should be able to change the pin name.
Tien P.
National Instruments

I can't print more then one page of a firefox document that is more then one page long. os xp3sp

I can't print a document that was created by firefox and is longer then one page.
== when I started using firefox

Firefox has problems with some style rules.
First, it's always helpful to use any print-formatted or print-optimized version of the page. Sometimes there is a link for this.
Second, in some cases you need to use this trick: press Ctrl+a to select all content on the page, then Ctrl+p to display the print dialog, and click the radio button next to Selection.
Those tricks don't always work, but hopefully they will help.

Can you have more then one iphone control the apple tv at the same time?

Can you have more then one iphone4 as a remote for one apple tv at the same time?

iCloud, iTunes & Apps Stores can be assigned different AppleID's from the Settings app. I have my phone and my wife's set up this way for the very reasons you are describing. Works well.

Configure more then one device at the JMF??

Hello every body..
I have a problem with dealing with java media frame work and i want to solve the problem as fast as i can since it will delay my work..
I hobe that any one can hep me..
The problem:
If any one use JMF Studio it is known that any one can captre any device connected such as ( camera , mic,...) using JMFStudio..
I do the capturing very well but the problem i face it is HOW I CAN CONFIGURE MORE THAN ONE CAMERA AT THE JMF??
If i connect 2-cameras from different types ( sony , web cam) then the jmf registary will register the 2-cameras with only one difinition is( vfw:Microsoft WDM Image Capture (Win32):0 ) so when i use the java code to access the 2-cameras then i found only one difinition for one camera and i can access only one camera!!!!!!!!!
I don't know how i can solve this problem??
please help me !!
For reply or any information contact me at my e-mail
[email protected]

Thanks for reply sir omcgovern..
I read what you say but i wondered while this problem from 2003 there is no any solution to this problem??
Now , what i can do to trick this problem???
Please if there are any solutions help me as fast as can !!!!!

Unable to set up more than one page on the home page. My options says only "current page" not "current pages".

I put in google then click "current page". When I try to add another page either after the google home page or on the same line as the google home page, I get only google. I have also tried this in a different order and I only get the website that is my first entry in the home page bar.

Have you seen the instructions at:
* [[How to set the home page#w_set-more-than-one-website-as-your-home-page]]_set-more-than-one-website-as-your-home-page
Note you can manually edit the home page entry, use the ''pipe'' key | to create a separator between pages.

How can I put seperate score files onto one page in the Layout?

I have written some exercises in different keys. They are small files. Each of them are saved individually and cover only part of a page each but I want to lay them out on one single page. I can't work out how. Each file is in a different key. As a short term solution I tried to combine them into one file and then could not work out how to change the key signature. When I insert the #'s and b's the following notes don't move to the right. So that does not work the way I do it. Does someone have a solution, please?
Cheers,
ansu

Thank You, musicspirit, for your support. What you suggested I had done already, but it did not work always only sometimes. ( Like a disfunctional light switch). Maybe I missed some setting or whatever or tried too many things...or..Anyway quite a few things didn't work, I spare you the details. Meanwhile I did disk maintenance and tossed out the files and started again from scratch ( which I wanted to avoid) and everything worked out fine so far. No problems with clef change, etc.
But to make it look as if I had three songs or three separate exercises on one page I need to create a bigger space between the 3rd and 4th staves and the 6th and 7th staves. I can do this only globally, which means I manage only to increase the space between all the staves. (I hope I am not asking the wrong thing again. Manuals are not always easy for the novice.)

We just received our new mac and took it to the store to have the old files from our last computer transferred over. Now we can't find all our files. There was more then one user on the old machine. How can we find the files from the other users?

We need to find where the files for the other user on the computer are now located. There were two other users on the old machine, which was taken into the store and ALL files were suppose to be transferred over to this computer. HELP!

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

Why does firefox open up more then one page when I login

After upgrading to Firefox 5, when I open Firefox it opens about 15 to 20 pages and I have to close the pages before it will let me continue. Why is this happening?

But there aren't any symbols. It's just set to http://www.yahoo.com
And every time I open Firefox, it opens with 3 Tabs, one of which IS Yahoo but the other 2 a regarding plug ins being successfully updated. I've even gone as far as to uninstall those plug ins and it still opens with 3. About ready to uninstall Firefox and stay with IE

It is possible to open the front panel of a subVI more then one time at the same moment?

I want to open a subvi´s front panel several times with each one operating independently. The subvi has a ring with several variables to choose to show in a graphic. The subvi is called from a button on the Main Front Panel. It is possible to, for instance, open the subvi and set it to show a temperature graphic and click again on the button to call another instance of the same subvi and select pressure for the graphic, keeping both new windows side by side? Will I still be able to access the Main Front Panel?

Yes you can. You have to use a .vit (VI template file). There's an example here. There's also been lot's of discussion on the subject. I think if you do a search for vit, you'll be able to find additional information and examples.

Opening the same form more then one time in the same session

H! I want to accomplish the following .... I have a form that has a button. The code in the when-buttin-pressed trigger is a call_form - to open another form. I want to be able to push this button as many times as the user may want and the form should keep opening a new form. Meaning I can have 10 forms of the second form open if I want. The user basically wants to be able to flip between the data on the same form opening up this form a couple of times in different windows. when I use the call form the button on the initial form is becoming disabled - not allowing me to push it again to open another form without closing the one already open. Please HELP!

Sounds like you need Run_product rather than Call_form.
It will establish multiple database sessions, and the user will be responsible for terminating them. And I am not sure, but this may only be possible in client/server forms.

When I starting my computer. I get more then one inbox at the bottom screen.

When starting up my computer. I get multiple in boxes. The icon has five in boxes. How do I fix this?
Thank you

Have you just started using Thunderbird, added a mail account and saw several Inbox?
or
have you been running thunderbird for a while and then these Inboxes just appeared?
Are there any emails in any of the Inbox 's?
Make sure you have View > Folders > All setting and post an image of your Folder Pane into this question, so that I can see what you are seeing.
Additional:
Is the mail account IMAP or POP?

How can i read more then one channel with the amux64

Im using AI one scan.
I tryed the string AM1 ! 0,1 and also AM1 !0:1 but it didnt worked.

Barak,
Check the following link, it must solve your issue:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/ef832cdaf87e9bf8862568a5007b2f47?OpenDocument
Hope this information is helpful
L Aguila
Applications Engineer
National Instruments

Priting more then one page in the layout

Similar Messages

Maybe you are looking for