Privacy issues with Reader

I work in a library. I cannot get Adobe Reader to show 0 file names. It retains 1 file name -a privacy issue for library patrons. Does anyone know how to change or edit this? Thanks.

Thanks for the suggestions Jim.
We are continually working to improve our iOS Reader, and we should address several of your requests over the coming year, as well as bringing many other things out. I can't reveal a lot right now, but stay tuned!
Regarding item 6, you are correct. Due to the way that iOS works, there is no way for the Adobe Reader to read or write directly from another app's location, or to remove files from that other app's folder once they have been sent to the Adobe Reader.
Dennis Griffin
Principal Product Manager
Reader Mobile

Similar Messages

Issue with "read by other session" and a parallel MERGE query

Hi everyone,
we have run into an issue with a batch process updating a large table (12 million rows / a few GB, so it's not that large). The process is quite simple - load the 'increment' from a file into a working table (INCREMENT_TABLE) and apply it to the main table using a MERGE. The increment is rather small (usually less than 10k rows), but the MERGE runs for hours (literally) although the execution plan seems quite reasonable (can post it tomorrow, if needed).
The first thing we've checked is AWR report, and we've noticed this:
Top 5 Timed Foreground Events
Event     Waits     Time(s)     Avg wait (ms)     % DB time     Wait Class
DB CPU           10,086           43.82
read by other session     3,968,673     9,179     2     39.88     User I/O
db file scattered read     1,058,889     2,307     2     10.02     User I/O
db file sequential read     408,499     600     1     2.61     User I/O
direct path read     132,430     459     3     1.99     User I/OSo obviously most of the time was consumed by "read by other session" wait event. There were no other queries running at the server, so in this case "other session" actually means "parallel processes" used to execute the same query. The main table (the one that's updated by the batch process) has "PARALLEL DEGREE 4" so Oracle spawns 4 processes.
I'm not sure how to fix this. I've read a lot of details about "read by other session" but I'm not sure it's the root cause - in the end, when two processes read the same block, it's quite natural that only one does the physical I/O while the other waits. What really seems suspicious is the number of waits - 4 million waits means 4 million blocks, 8kB each. That's about 32GB - the table has about 4GB, and there are less than 10k rows updated. So 32 GB is a bit overkill (OK, there are indexes etc. but still, that's 8x the size of the table).
So I'm thinking that the buffer cache is too small - one process reads the data into cache, then it's removed and read again. And again ...
One of the recommendations I've read was to increase the PCTFREE, to eliminate 'hot blocks' - but wouldn't that make the problem even worse (more blocks to read and keep in the cache)? Or am I completely wrong?
The database is 11gR2, the buffer cache is about 4GB. The storage is a SAN (but I don't think this is the bottleneck - according to the iostat results it performs much better in case of other batch jobs).

OK, so a bit more details - we've managed to significantly decrease the estimated cost and runtime. All we had to do was a small change in the SQL - instead of
MERGE /*+ parallel(D DEFAULT)*/ INTO T_NOTUNIFIED_CLIENT D /*+ append */
USING (SELECT
      FROM TMP_SODW_BB) S
ON (D.NCLIENT_KEY = S.NCLIENT_KEY AND D.CURRENT_RECORD = 'Y' AND S.DIFF_FLAG IN ('U', 'D'))
...(which is the query listed above) we have done this
MERGE /*+ parallel(D DEFAULT)*/ INTO T_NOTUNIFIED_CLIENT D /*+ append */
USING (SELECT
      FROM TMP_SODW_BB AND DIFF_FLAG IN ('U', 'D')) S
ON (D.NCLIENT_KEY = S.NCLIENT_KEY AND D.CURRENT_RECORD = 'Y')
...i.e. we have moved the condition from the MERGE ON clause to the SELECT. And suddenly, the execution plan is this
OPERATION                           OBJECT_NAME             OPTIONS             COST
MERGE STATEMENT                                                                 239
MERGE                             T_NOTUNIFIED_CLIENT
    PX COORDINATOR
      PX SEND                       :TQ10000                QC (RANDOM)         239
        VIEW
          NESTED LOOPS                                      OUTER               239
            PX BLOCK                                        ITERATOR
              TABLE ACCESS          TMP_SODW_BB             FULL                2
                Filter Predicates
                  OR
                    DIFF_FLAG='D'
                    DIFF_FLAG='U'
              TABLE ACCESS          T_NOTUNIFIED_CLIENT       BY INDEX ROWID    3
                INDEX               AK_UQ_NOTUNIF_T_NOTUNI    RANGE SCAN        2
                  Access Predicates
                    AND
                      D.NCLIENT_KEY(+)=NCLIENT_KEY
                      D.CURRENT_RECORD(+)='Y'
                  Filter Predicates
                    D.CURRENT_RECORD(+)='Y' Yes, I know the queries are not exactly the same - but we can fix that. The point is that the TMP_SODW_BB table contains 1639 rows in total, and 284 of them match the moved 'IN' condition. Even if we remove the condition altogether (i.e. 1639 rows have to be merged), the execution plan does not change (the cost increases to about 1300, which is proportional to the number of rows).
But with the original IN condition (that turns into an OR combination of predicates) in the MERGE ON clausule, the cost suddenly skyrockets to 990.000 and it's damn slow. It seems like a problem with cost estimation, because once we remove one of the values (so there's only one value in the IN clausule), it works fine again. So I guess it's a planner/estimator issue ...

Issue with reading emails state.

Dear community,
in my company, we have BB to bring a very good 24hrs service to our customer, but the thing is that we started to have an issue with our BB and the Microsoft Office 365 and Exchange service.
We have BlackBerry Enterprise service activated on each blackberry, so we receive every email in our BBs.
But, when we read an email, after you go back to the mailbox, it appears as un-read again. Then, if you read it again, and go back to the mailbox, it appears as read.
DO you know why it's happening?.
Thanks in advance,

Hi,
Use TRY & CATCH statements before OPEN DATASET...
For exact syntax check F1 help on try & catch...
TRY.
CATCH.
OPEN DATASET..
endcatch.
endtry.
Hope it helps!!
Rgds,
Pavan

How can I download my issues with Reader's Digest when each time a pop appears and reads " the item you tried to buy is no longer available"?

I can no longer download my purchased Reader's Digest magazine since August as it requires updating the RD app. So when i try to download the RD app a pop up appears and reads " the item you tried to buy is no longer available". What does this mean and what do I do? I have 2 pending reader's digest issues that needs to be downloaded.

I don't have an answer for you but it may help to have a look at the "More Like This" section at the far right of this page. Reading those additional threads may get you some idea of the actual issue and how to resolve it. It could be that problems were found with the app and it was temporarily pulled for some reason which may be the reason for the "the item you tried to buy is no longer available" message.

Mac / Adobe Compatibility Issues with Reader X1 & Acrobat X1

I'm using Acrobat X1 11.0.10 and Reader 11.0.10 with Mac OS X ( 10.8.5).
In Reader, when I click the "show next page" down arrow, it takes around 5 seconds to jump to the next page. (scrolling to the next page via the scroll bar works fine).
In Acrobat, when I use the text edit tools, it can take up to 10 seconds before I can edit a word (remove or add a letter).Oftentimes, Acrobat will highlight the whole paragraph rather than just the word I select. (I think this is due to the lag time.) When I backspace to remove a word, nothing happens ... for several seconds. Then letters begin disappearing.
I reverted from Mavericks and Yosemite back to Lion (or Mountain Lion - I forget what they called 10.8.5) in the hopes of fixing this issue. When I say reverted back. I did a full install. Wiped the hard drive, loaded 10.8.5 and started this Mac as if it were new.
Is there a version of Reader and Acrobat that work with Mac OS X ( 10.8.5)?

Hi,
Acrobat 11 is compatible with MAC 10.8.5. So, there are no compatibility issues.
Please let me know if this happens with every PDF or some specific one?
If specific, then please tell me what is the size of your PDF file.
You might also try repairing Acrobat from the Help menu.
Regards,
Anubha

Safari privacy issue with "fraudulent site" option?

If one uses the "Fraudulent sites" option in Safari, does Apple or Google know each and every website you visit?
In other words, does a database download to your computer and the websites you visit are checked against it locally. Or, does every website you visit get reported and checked against an external database at Google or Apple, etc.?
If it's the latter, I think this has far too much potential for privacy abuse. I've searched around for information on this, but have run into dead ends. Is there an expert here and/or someone who has information on just specially how the " "Fraudulent sites" option in Safari works in this regard?

Hmmmm....
via MacWorld:
Nothing in Apple’s ridiculously minimal release notes suggested that this feature existed. But this time, the company’s intransigence in telling you what it has changed in the software you use may have further consequences. How Safari could “know” about these phishing and malware sites raises all kinds of interesting questions. Now we can tell you with reasonable confidence how it all works—but because Apple has not done the same thing, we cannot say with certainty that it is completely private, or that Safari is not sending information about the pages you visit to a third party.

Modbus - Issues with Reading Holding Registers

I am trying to read the holding registers on a RS485 2 wire modbus power monitor (Veris Industries E50C2).I am receiving bytes from the device so there appears to be communication. However, the response string is the exact same string as my command string. For instance, I am sending the hexadecimal string 0103 0000 0005 in order to read the first 5 holding registers, but I am receiving this exact same string back via the read VISA read function. I have attached an image of my VI. I would expect to see the response as "0103 (the device ID and command) followed by the number of bytes to follow and the contents of the holding registers.
The VI is running on a cRIO 9012 with 9111 chassis. I am using the 9871 c-series RS485/RS422 interface module.
Any ideas what the issue may be?
Kind Regards
Adam
Attachments:
Modbus VI.png ‏15 KB

I indeed manage to fix the issue for myself.
I used the same method you are starting right now, i conencted the NI9871 to the rs485 adapter given by the supplier and tried sending and reading my own signals.
After much hassle and some changes to your (and my) initial vi setup as shown in your first post, everything worked out fine:
(see the attached picture)
1. I used the NI modbus VIs, but it worked as well with the normal visa commands and building the modbus command on your own, but way easier with the NI VIs.
2. i added the function to resize the buffer to its maximum size (not sure if thats actually helping with anything, but better be safe then sorry).
3. Change the wire mode for the 9871 to rs485/wire2-auto with a property node.
4. remove the large delay between write and read
5. Last but not least, the one thing that changed the fact that i only received my own echo:
I changed the connection of the Rx+/Tx+ and Rx-/Tx- around, basically connecting the 2wire sensor the other way around the manufacturer said it should be connected to the master device.
(6. Recheck the amount of stop bits, all modbus device i use in my lab are using 2 stop bits, but that could be a coincidence)
Maybe something of that list helps you
Attachments:
Modbustest01.jpg ‏95 KB

Issue with reading a xml file from xsl

Hi,
When I am trying to read a xml file from xsl, I am getting unwanted output.
Following is the XSL:
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
    <source type="XSD">
      <schema location="../xsd/B2BMarketProperties.xsd"/>
      <rootElement name="ReceipentIDType" namespace="http://www.example.org"/>
    </source>
</mapSources>
<mapTargets>
    <target type="XSD">
      <schema location="../xsd/B2BMarketProperties.xsd"/>
      <rootElement name="ReceipentIDType" namespace="http://www.example.org"/>
    </target>
</mapTargets>

?>
<xsl:stylesheet version="1.0"
                xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
                xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
                xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
                xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
                xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
                xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                xmlns:ns0="http://www.example.org"
                xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
                xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
                xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                xmlns:med="http://schemas.oracle.com/mediator/xpath"
                xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
                xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
                xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
                xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
                xmlns:xsd="http://www.w3.org/2001/XMLSchema"
                xmlns:ora="http://schemas.oracle.com/xpath/extension"
                xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
                xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
                exclude-result-prefixes="xsi xsl ns0 xsd bpws xp20 mhdr bpel oraext dvm hwf med ids bpm xdk xref ora socket ldap">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:variable name="ReceipentID" select="document('../xsd/B2BMarketProperties.xml')"/>
<xsl:template match="/">
    <ns0:ReceipentIDType>
    <xsl:for-each select="$ReceipentID">
      <ns0:ReceipentID>
        <xsl:value-of select="$ReceipentID"/>
      </ns0:ReceipentID>
      </xsl:for-each>
    </ns0:ReceipentIDType>
</xsl:template>
</xsl:stylesheet>
Following is the XML ( B2BMarketProperties.xml)
<?xml version="1.0" encoding="UTF-8" ?>
<ReceipentIDType xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                 xsi:schemaLocation="http://www.example.org B2BMarketProperties.xsd"
                 xmlns="http://www.example.org">
<ReceipentID>123</ReceipentID>
<ReceipentID>345</ReceipentID>
</ReceipentIDType>
The output i am getting with this code is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:ReceipentIDType xmlns:ns0="http://www.example.org">
    <ns0:ReceipentID>123345</ns0:ReceipentID>
</ns0:ReceipentIDType>
But, I need output in the following format
<ns0:ReceipentIDType xmlns:ns0="http://www.example.org">
    <ns0:ReceipentID>123</ns0:ReceipentID>
     <ns0:ReceipentID>345</ns0:ReceipentID>
</ns0:ReceipentIDType>
Could you guys let me know what i am doing wrong. Any help would be appreciated.
Thanks,

This worked for me :
<xsl:template match="/">
    <ns0:ReceipentIDType>
      <xsl:for-each select="document('B2BMarketProperties.xml')/*:ReceipentIDType/*:ReceipentID">
        <xsl:variable name="count" select="position()"/>
        <ns0:ReceipentID>
          <xsl:value-of select="document('B2BMarketProperties.xml')/*:ReceipentIDType/*:ReceipentID[$count]"/>
        </ns0:ReceipentID>
      </xsl:for-each>
    </ns0:ReceipentIDType>
</xsl:template>

Issue with reading attachment in sender mail adapter

Hi, I am working on Email to file scenario, where I have to connect to exchange server and take the attachment of the email (xml file) and save it on to PI server. I have configured sender mail communication channel with following details:
Protocol: POP3
Message protocol: XIPAYLOAD
Mail attributes: keep attachments
Module:
1     localejbs/AF_Modules/PayloadSwapBean     Local Enterprise Bean     1
2     localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean     Local Enterprise Bean     mail
1     swap.keyName     Content-Description
1     swap.keyName     Content-Description
1     swap.keyValue     attachment,filename="MailAttachment-1.xml"
1     swap.keyValue     MailAttachment-1
Also, configured receiver file adapter.
Since I donu2019t have to read mail content , I havenu2019t created any design components in ESR. I have just refrred to dummy namespace, interface (both sender and receiver). in receiver determination, interface determination, sender agreement and receiver agreements.
It was working fine, not sure what changes happened. Now I could see the attachment payload in message monitor.
Under Inbound message->payloads->
MailMessage ( text/xml;charset=utf-8 )
MailAttachment-1 ( text/xml;name="****************")
But the fille that is getting created doesnu2019t have the contents of the attachment (xml file) . It has some other information, shown below:
Directory: ******
Name:       ********.xml
      =NextPart_002_01CB2C5B.B033B325#
content-type:text/plain;charset="us-ascii"#
content-length:30#
content-transfer-encoding:quoted-printable#
<<**********.xml>>=20#
      =NextPart_002_01CB2C5B.B033B325#
content-type:text/html;charset="us-ascii"#
content-length:#
content-transfer-encoding:quoted-printable#
      =NextPart_002_01CB2C5B.B033B325 #
Can you please let me know what is going wrong here.

using following parameters in module resolved my problem:
MOdule name                                                                           Type                                                            Module Key
AF_Modules/PayloadSwapBean                                            Local Enterprise Bean                                      transform sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean     Local Enterprise Bean                                      mail
Module Key                                    Parameter Name                              Parameter value
transform                                        swap.keyName                                Payload-Name
transform                                        swap.keyName                                 MailAttachment-1

Issue with read statement with one more key missing in mapping

Hi All ,
I have such data in two internals table :
IT_bdc
vbeln            posnr
90000593     10
90000576     10
90000672     10
90000672     20
90000672     30
it_konv
kbetr          vbeln
6250          90000576
12160000          90000593
500000          90000672
600000          90000672
700000          90000672
My current program statement is :
LOOP AT it_bdc.
READ TABLE it_konv WITH KEY
      vbeln = it_bdocs-vbeln.
currency =   it_konv-waers.
endloop.
as you can see the posnr is missing in it_konv how can i modify this read statement so
that vbeln posnr from it_bdc should get correct kbetr from it_konv.
Kindly help in this mapping.

Hi
sort it_konv by vbeln
then
loop at it_bdc.
read table it_konv with key vbeln = it_bdc-vbeln binary search.
if sy-subrc = 0.
perform your logic/task.
endif.
endloop.
also it depends what you want to do after reading it_konv.
in my logic if there is a vbeln in it_konv which s present in it_bdc then sy-subrc will be 0
and you can perform your logic.
and if there will be no matching vbeln in it_konv then sy-subrc will not be 0.
check the values in debugging.
Thanks
Lalit

Issue with reading XLSX with multiple sheets file in application Server

Hi,
We're currently implementing SAP CRM 7.40.
In one requirement we have to process an XLSX file and load its information to a set of Z tables.
The file has 6 sheets of data to process, each sheet with distinct number of columns and types (each sheet will be upload to a different Z table).
We're able to process the XLSX using the Desktop Office integration for local files.
However, we must also be able to process files on the application server.
We tried the following approaches without success
- The DOI library doesn't seem to support remote files processing:
- OPEN DATASET. with the dataset we're able to read a remote file, however since the file format is XLSX, the information we read in the dataset comes in an unreadable format
- FTP. we tried to use FTP to download the remote file to a local folder so that we could then use the DOI library to process the file. However, the client only allows SFTP connections and SAPFTP doesn't provide SFTP
There's another approache we're considering to try which is to have a perl script on the application server to split the Excel file into CSV files (one for each tab) and then use OPEN DATASET to read the contents of each file and work from there. This approach seems quite cumbersom
The approach with DOI would be the best one but either we're missing a key configuration or it truly can't be used for files. Are there any special requirements that we should take into account for this option?
We'd like to know if you have any other approach that proves successfull or if any of the above can work but with some aditional adjustments.
Thanks in advance.
Best regards.

Hello Ricardo,
Go through below link.
to read Excel file from the application server in a BACKGROUND process
You can try below approach if it is feasible for you.
Turning ".XLSX" into XML & read XML file through application.
XLSX Upload - a Unified Approach - SCN - SAP.com
Thanks!
Sameer

Issue with Read only VO Query bind parameters

Hi Experts,
Working in Jdev 11.1.1.3.0
I am face one issue, probably its very common to all of us, bcoz i to do the same thing in N number of times.
Issue:
select count(*) as cnt from emp
where
((:BindEmpId is NOT NULL AND EMP_ID = :BindEmpId) AND
(DEPT_ID IS NULL OR DEPT_ID =: BindDeptId));
when i run this query its giving correct result(count is 0) but usually i written like
select count(*) as cnt from emp
where
((:BindEmpId is NOT NULL AND EMP_ID = :BindEmpId) AND
(BindDeptId IS NULL OR DEPT_ID =: BindDeptId));
this time its giving count is 1, which is wrong.
Data in data base:
ID     DeptID     value EmpID
226     1519     jh 601
So which one is correct?

Well, the two select statements are for different use cases and we can't decide which is the correct one as we don't know the use case.
Your data looks like
ID   DeptID value EmpID
226 1519   jh    601 There are some decisions we can't make with only one row in the table. We don't know if DepIt can be null in the table and/or EmpId can be null. This information is vital for your select statements.
Next we don't know how you want to handle the query if one or both bind parameters are null.
Should the query return 0 in this case or should the query just omit the part of the query if the bind variable is null (and then return the result found with the remaining query)?
We can't possible answer this.
You need to provide more information...
Timo

Issue with Reading data with FOR EACH LOOP.

Hi Guys,
Scenario
We Plan Sales of an Article on a half years(fiscal variant MQ with 2 periods of half year each). We also plan the
number of Weeks in Sales as a Key figure. The cummulative Sales for two half years in then distributed to number of weeks for which the Article is sold (0CALWEEK)
In another Cube we plan a distribution profile. This cube contains just three elements.
Characteristic = ZPROFILE
TIme Char = 0CALWEEK
Keyfigure = ZDIST
(Note : You will notice The distribution profile is not stored per Article here)
The logic of distribution is :
1. Sales of Article is cummulated for 1 years ( eg. for periods 001.2010 & 002.2010 )
2. Find the number of weeks in Sales for this Article ( eg. 14 weeks. ) [Technically we store this value on the first fiscal
period. In our example it is stored in 001.2010
3. User choose a distribution profile in a variable ( e.g ZH55 )
4   ZDIST is summed for number of Sale Weeks for this Article. in our case it is14 weeks.
5. Distribution = Sales of Article (WEEK N) = [Sales Cummulated for 1 year] * [ZDIST(Week N) / ZDIST(sum of 24 weeks)]
This loop is run 14 times. (N from 201001 to 201014.)
TECHICAL DETAILS
Cube 1 (0CM_SKU = Material, 0CPBAINSABU = SALES key figure, WEEKINSALE = Number of weeks for which Material will be
sold). The Sales Planned data is stored as # for 0CALWEEK.
0CM_SKU/0CALWEEK/0FISCPER/0FISCVARNT/0CPBAINSABU--/WEEKINSALE
SHIRT/000000/2010001/ZP/100EUR--/24
SHIRT/000000/2010002/ZP/200EUR--/00
PANTS/000000/2010001/ZP/300EUR--/35
PANTS/000000/2010002/ZP/200EUR--/00
CUBE 2 ( the profile data is stored here )
ZPROFILE/0CALWEEK/ZDIST
ZH55/201001/10
ZH55/201002/12
ZH55/201003/8
ZH55/201004/11
ZH55/201005/10
..so on.
9:11 PM
Edited by: Dheeraj Gupta on Apr 5, 2010 9:20 PM

My Sample CODE IS BELOW.
DATA CW1 TYPE 0CALWEEK.
DATA CW2 TYPE 0CALWEEK.
DATA PER1 TYPE 0FISCPER.
DATA PER2 TYPE 0FISCPER.
DATA FVAR TYPE 0FISCVARNT.
DATA PROV1 TYPE 0INFOPROV.
DATA PROV2 TYPE 0INFOPROV.
DATA SKU TYPE 0CM_SKU.
DATA DPROF TYPE ZPROFILE.
DATA CUMSALES TYPE F.
DATA TEMP TYPE F.
DATA PRO TYPE F.
DATA COUNT TYPE I.
*I WILL READ THE PROFILE VALUE FROM VARIABLE IN ACTUAL PROGRAM.
HARDCODED FOR TEST PURPOSES.
DPROF = 'ZH55'.
*FISCAL YR VARIANT
FVAR = 'MQ'.
*HARDCODED FOR TEST PURPOSES.
PER1 = 2010001.
PER2 = TMVL(PER1, 1, FVAR).
*CUBE FOR SALES
PROV1 = 'ZCLARK'.
*CUBE FOR PROFILE
PROV2 = 'C_ZCLARK'.
FOREACH SKU.
*SUM UP SALES FOR ONE YEAR
*Operand:{Key figure name, 0CALWEEK, 0CM_SKU, 0FISCPER, 0FISCVARNT, 0INFOPROV, ZPROFILE}
CUMSALES = CUMSALES + {0CPBAINSABU,#,SKU,PER1, FVAR,PROV1,#} + {0CPBAINSABU,#,SKU,PER2, FVAR,PROV1,#}.
*READ NUMBER OF WEEKS OF SALES
COUNT = {ZNWEEK,#,SKU,PER1, FVAR,PROV1,#}.
*HARDCODED FOR TEST PURPOSES.
Starting week of distrbution is first week of the year
CW2 = 201001.
CW1 = 201001.
*HELP NEEDED HERE ***********
*NOT ABLE TO READ THIS PROFILE DATA
DO COUNT TIMES.
   PRO = PRO + {ZPROF,CW2,#,#,#,PROV2,ZPROFILE}.
   CW2 = TMVL(CW2, 1).
ENDDO.
DO COUNT TIMES.
{0CPBAINSABU,CW1,SKU,#, #,PROV1,#} = CUMSALES * {ZPROF,CW1,#,#, #,PROV2,ZPROFILE} / PRO.
CW1 = TMVL(CW1, 1).
ENDDO.
*RESET
CUMSALES = 0.
ENDFOR.

Privacy Issues with Calls.

Hello, I just purchased number and calling on Skype. I am trying to call people but it does work. I noticed people can't call me. This is because my account is under 16 and so am I. I would like to make it so my parents and etc can call me. But it wont let me change it. I feel as if I am wasting money even using Skype if I can't change this.
Solved!
Go to Solution.

Hi, ChillaxOwner, and welcome to the Community,
Here is the FAQ information related to Skype accounts for <16 year old people:
https://support.skype.com/en/faq/FA10548/what-security-do-you-have-in-place-for-under-16-year-olds
As I did not find this information addressed your enquiry, I am asking you to please reach out to Skype Customer Service to enquire why the subscription-OnLine number, or credit you purchased is not working properly. Here is how to contact Customer Service:
Skype offers help and support through:
Email - follow the steps below to submit your support request to us by email
Live chat for eligible customers
We don’t currently offer telephone support.
If you are a Skype customer, you can contact Skype Customer Service as follows:
Click this link and sign in with your Skype Name and password.
Select the topic you need help with and the problem you are having. Some information is displayed that might help with your problem.
If the information doesn’t help, click Continue support request.
Select your contact method.
If you chose email, enter your details, describe your problem, and then click Send support request. We'll get back to you as fast as we can.
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Issues with Reader

Hi All
I have been experiencing problems with my PDF files. Each time i open a file, it will close all by itself within seconds. I've deleted, redownloaded and restarted Reader several times without any help. It's gotten really frustrating. Please help!

right click a pdf and click "run as administrator".
any problem? if yes:
run the cleaner: http://labs.adobe.com/downloads/acrobatcleaner.html
then install acrobat reader: http://www.adobe.com/products/reader.html
(untick mcafee)

Privacy issues with Reader

Similar Messages

Maybe you are looking for