Privacy options will not allow me to choose "use custom history" settings" - it always reverts back to "remember history"
A website states "There is a problem with your bookmark/favorite or cookie settings" - then provides steps in Firefox to correct the problem, i.e. set history to accept cookies and accept third-party cookies. I select "use custom history", select the proper cookie settings, click OK, and close the window. However, when I re-open the options window it's always reset to "remember history" and I can't access the website I want to use.
Choosing the "Use custom settings for history" setting doesn't make any changes to history and cookie settings.<br />
Firefox shows the "Use custom settings for history" setting as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.<br />
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".<br />
Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a check mark.
Similar Messages
-
Will not allow me to select on under wifi settings
My phone will not allow me to select on under wifi settings. It appears faded as if it is not a possibility. I have tried turning off phone and have tried re-setting network settings.
See this article: http://support.apple.com/kb/HT1925
If none of the tips in that article resolve the problem you have a hardware failure, probably of the radio chip. If you take it to an Apple store they will replace it if in warranty, or for $199 if out of warranty. -
I downloaded the Adobe free trial to convert a PDF to Word and it will not open. Further, even though I have signed in, it reverts back to the sign in page over and over and over again. How do I convert?
Moving this discussion to the Adobe CreatePDF forum.
-
I have been by a web sit that the cookies are disabled in the browser. on looking at the help on firefox help the instuction as i understand was to change the setting under the privacy tab ref history fromthe default setting of rember hhistory to use custom settings for history. I change the setting click ok but it reverts back to rember history. I just cannot change the setting.This also happend in the prevous version.
To see History and Cookie settings in Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
You need to make at least one change to make "Use Custom settings" stay selected.
If all history settings are the default then the History and Cookie setting revert to "Remember history" the next time you open Tools > Options > Privacy.
So it looks that your cookie setting are already correct.
* http://kb.mozillazine.org/Cookies
* http://kb.mozillazine.org/Websites_report_cookies_are_disabled -
HT6162 Hi my phone will not allow me to update phone in my settings it's a iPhone 4S
iPhone 4S will not turn on wifi so I can update to 7.1
Can you update it via iTunes?
-
IPhone5 will not vibrate on silent when using custom ringtone from iTunes sync
Hello,
I've troubleshot this one to death and came to find that my iPhone5 will not vibrate in silent mode when the audible tone is set to a tone synced to the device from iTunes.
I've found that the phone DOES vibrate on silent when the audible ringtone is set to a tone that comes with the Phone out of the box.
Any advice on how to rectify this would be greatly appreciated.
Thanks,
DPI have this same issue, I havent been able to sync my phone since May 15th. I am using Itunes 11.0.3 and I have an Iphone 5. I reset my phone and deleted Itunes and reset sync history, all of which didnt work. I have already turned in my Macbook pro because of its buggy ways and I am thinkin I am going to have to leave the iphone if this doesnt get fixed. "Itunes was unable to load data class information from sync services. Please try again later. I have also removed norton and that didnt fix it. Apple is such a dispapointment anymore. I used to reccomend them but now I tell people to stay away.
Its driving me nuts, I was wondering how you fixed this.
Thank you -
ITunes show Airport Express Speakers but will not allow me to choose them
Hi, I just installed and updated my 802.11g airport express. When I open iTunes (version 9- just updated today), I am able to see the speaker selector option on the bottom right of the screen. When I open it, the choice for my laptop speakers and airport speakers both appear; however, only the laptop speakers can be chosen. I am unable to choose the airport speakers at all. I have downloaded all of the latest firmware/software I can think of for both iTunes and the airport express. Please help!!!
After months of having this problem (and a few unsuccessful hours at the Genius Bar), I finally found a fix.
In AirPort Utility, I updated the firmware.
I redid a bunch of other settings, too. Updated to latest iTunes (9), reset my preferences in Security (via Control Panel) and reset the remote speaker option through iTunes (preferences, advanced). But, it was the firmware update that finally got it to work. Sorry I can't be more specific - I'm not a computer buff. Good luck!
Dang, I hate updates. -
Ever since I enabled I-phone Radio, the icons turned red & whenever I choose any of my purchased songs, an error pop-up appaers telling me my song does not have radio station creation options. Indeed, now I do not even see meny options for browsing or choosing ANY of my created playlists anymore & I cannot find a method to turn off/disable the RADIO MODE...HELP ANYONE...
What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears. -
My friends iphone 5 will not allow them to change their custom voicemail greeting
My friend has his iphone 5 (Verizon) updated to 7.0.3 and is unable to change his voicemail greeting.
When he tries to record a new one and then hits stop, it doesn't actually record it, because he hits play and it plays back the old one.
We've tried these below without any success:
-Switching the greeting to default and then back to custom
-Doing a hard reset of the phone (holding power and home button simultaneously)
-We've tried to dial *86, but when we call we get "Could not complete your call, please try again"
-We've also tried the following steps below (from Verizon)
=============
Visual Voicemail
On iPhone, visual voicemail lets you see a list of your messages and choose which ones to listen to or delete, without having to listen to instructions or prior messages.Note: Visual voicemail may not be available in all countries or regions, or may be an optional service. Contact your carrier for more information. If visual voicemail isn’t available, tap Voicemail and follow the voice prompts to retrieve your messages.
Number of missed calls and unheard voicemail messages appears on the Home screen Phone icon.
Setting Up Voicemail
The first time you tap Voicemail, iPhone prompts you to create a voicemail password and record your voicemail greeting.
Change your greeting:
1 Tap Voicemail, tap Greeting, then tap Custom.
2 Tap Record when you’re ready to start.
3 When you finish, tap Stop. To review, tap Play. To rerecord, repeat steps 2 and 3.
4 Tap Save.
===========
Any thoughts? Thanks.hahaha he really is my friend (he's an older guy that's technologically inept). I'm tech-savy (hence why he asked me), but I was unable to get this working. Thanks for the advice, I've told him to go into a Verizon store.
-
How can I move rentals from my Ipod back into my I tunes Library?
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer -
I cannot print wirelessly to printer or to Evernote, etc. Print option will not work. If I use Safari, the PDF will print.
Most likely culprits are one of these:
com.vmware.kext.vmnet 0073.02.98
com.vmware.kext.vmioplug 0073.02.98
com.vmware.kext.vsockets 90.1.5
com.vmware.kext.vmci 90.1.1
Boot into safe mode, put the machine to sleep, wait about 10 minutes, wake it, and see if the issue persists. If not, dump vmware, restart normally, and repeat the sleep/wake steps.
See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details. -
After purchasing a movie from iTunes, I clicked on the film and it brought me to the movie's DVD menu. However, it will not allow me to select it to play. I can select the "chapters" option, but I cannot select any of the chapters. Essentially, it is stuck on the menu.
Did the download complete?
Resuming downloads from a computer
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Click the "Check Downloads" button.
Click the Resume or Resume All button, or the resume arrow to resume the download.
from http://support.apple.com/kb/HT1725
Try right clicking or Control clicking the movie and choosing Show in Finder.
Can you Right click the movie and Open With QuickTime Player? -
When I open iTunes, it will not allow me to preview or download TV shows. The preview and download options are gray and will not let me view them. I have tried installing the latest Quicktime but it tells me that I have to do software update and when I do, Quicktime does not appear to need an update. I have no idea what to do
Click on your preference and check the Parental tab for possible restrictions. Open iTunes, then click the iTunes menu, select preferences after the window opens click on the Parental icon, take a look at the content restrictions section.
-
My itouch will not allow me to connect to my wifi. It doesn't even let me get onto my wifi settings. The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!! So i can't access NOTHING!!!! Our other new itouch's work fine (im using one right now lol lol) so it isnt my wifi/router.... My itouch is old lol, I've had it for 4 or 5 years and it's cracked up etc...lol lol. But it still works great, however, it was out of commission for the past 5 months cuz my computer was not working to sync it and it wanted me to "connect to itunes" and i couldnt at the time...(plug it in to sync).... And now my computer and iTunes are working and the itunes software is updated as well. So i have synced my itouch and said itouch is working and restored however it will not allow me to access my wifi settings. The button is unaccessable and unhighlighted as i have stated above already and am in the process of syncing and restoring said itouch again!!! Which should take another full day or two lol lol omg!!!
Please help :)
I love my old itouch!!! :( and Miss it dearly lol :(
Ty in advance for anybody's help with this matter.My itouch will not allow me to connect to my wifi. It doesn't even let me get onto my wifi settings. The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!! So i can't access NOTHING!!!! Our other new itouch's work fine (im using one right now lol lol) so it isnt my wifi/router.... My itouch is old lol, I've had it for 4 or 5 years and it's cracked up etc...lol lol. But it still works great, however, it was out of commission for the past 5 months cuz my computer was not working to sync it and it wanted me to "connect to itunes" and i couldnt at the time...(plug it in to sync).... And now my computer and iTunes are working and the itunes software is updated as well. So i have synced my itouch and said itouch is working and restored however it will not allow me to access my wifi settings. The button is unaccessable and unhighlighted as i have stated above already and am in the process of syncing and restoring said itouch again!!! Which should take another full day or two lol lol omg!!!
Please help :)
I love my old itouch!!! :( and Miss it dearly lol :(
Ty in advance for anybody's help with this matter. -
My iPad is frozen with the message not enough storage. Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off. How do I get past that message?
Delete some apps, files, photos, videos, movies, etc to free up some space.
How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
Cheers, Tom
Maybe you are looking for
-
Sql Server 2012 Cluster IP Responses to MS Dynamics APP server broadcasts
Hi All, We are facing issues in our brand new MS Dynamics AX 2012 R3 installation with clustered MS SQL 2012. The DB server responses to the APP servers is like broadcasting to every system connected to the subnet. In our case that subnet is 192.168
-
Ajax Map Viewer Tutorial - Not showing Map !
Hi, there I just tried the Ajax Map Viewer Tutorial.I downloaded the Ajax Map viewer component and imported it to JSC. Got the Google API key and dropped the Map viewer component on the page and added the API key But when I run the application.The pa
-
Payroll Cluster, PCALAC, Third Party Remittance
Hello All, Does anyone know if the run type 'TP' for Third Party can be pulled into the PCALAC table? I know PCALAC only showed 'PP' in older releases. Do you know of a way to get TP to populate in this PR cluster? Thank you, Angel
-
I'm trying to make a cursor as part of a pl/sql function. i find that if I include one value of type LONG in the output I am fine but if I need to output a second variable (by exactly the same mechanism) I get a warning about illegal use of LONG data
-
Recover the deleted Function modules
Hi, I have a function group and some functional modules in it. Accdently i have deleted that function group and all the functional modules are also get deleted. Is there any way to recover those function group or the function modules. Thanks, Ab