Privacy settings for Online Number

Hello,
I'm trying to change the privacy settings in my account from Only Skype Contacts to Anybody so I will be able to receive calls to my Skype Online number from friends and family.
Everytime I do it after a few minutes it goes back to Only Skype Contacts on its own....
How can I make this change permanent so I can get calls from Anybody to my Online number.
Please help
Pri

Pls I want t o know reason why I cannot recharge my account anymore.

Similar Messages

"Settings for material number conversion not found" occurs when ...

After I run an initial load data into the InfoCube 0PUR_C01, I want to check the InfoCube Content by the following path:
RSA1 -> pick up the InfoCube 0PUR_C01, right click it and select Manage -> Get to Content tab -> Click InfoCube Content button -> Deselect all selection, only tick the 1st column checkbox next to 0Material, then hit enter, get a small window titled as "Cancel" with a red STOP msg sysing "Settings for material number conversion not found" with an "Exit" button and a question mark button, click Exit button leads to SAP Easy Access screen, if clicking the question mark button, another window pops up with the msg showed above, click Technical Information button causes the original window short dump and the short dump msg shows below in between two dashed lines:
Runtime Errors         RPERF_ILLEGAL_STATEMENT
Date and Time          11/28/2005 14:43:13
ShrtText
    Statement "CALL SCREEN" is not allowed in this form.
What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLSHL2" had to be terminated because on
    statements could not be executed.
    This is probably due to an error in the ABAP program.
Error analysis
    There is probably an error in the program
    "SAPLSHL2".
    The program was probably called in a conversion exit
    or in a field exit. These are implemented by
    function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or
    USER_EXIT_xxxxx_INPUT.
    Conversion exits are triggered during screen field transports or
    WRITE statements, field exits during field transports from the
    screen to the ABAP/4 program.
    In this connection, the following ABAP/4 statements are not allowed:
    - CALL SCREEN
    - CALL DIALOG
    - CALL TRANSACTION
    - SUBMIT
    - MESSAGE W... and MESSAGE I...
    - COMMIT WORK, ROLLBACK WORK
    - COMMUNICATION RECEIVE
    - STOP
    - REJECT
    - EXIT FROM STEP-LOOP
    Moreover, conversion exits for output conversion
    (implemented by function modules called
    CONVERSION_EXIT_xxxxx_OUTPUT) do not allow
    - MESSAGE E...
    to be used.
Trigger Location of Runtime Error
Program                                 SAPLSHL2
Include                                 LSHL2F19
Row                                     3
Module type                             (FORM)
Module Name                             TECHNISCHE_INFO5
rce Code Extract
e SourceCde
1 ***INCLUDE LSHL2F19 .
2 form technische_info5.
>>   call screen 1900 starting at 5 8.
4 endform.
5
6 &----
7 *&      Form SHRINK_VALUES
8 &----
9 *       text                                                           *
10 ----
11 * --> p1        text
12 * <-- p2        text
13 ----
14 form shrink_values.
15
16   loop at dynpselect.
17     clear checktable.
18     if dynpvaluetab-lowvalue ne space and dynpvaluetab-lowvalue na '*'.
19       move 'EQ' to checktable-op.
20       move dynpvaluetab-lowvalue to checktable-low_value.
21       append checktable.
22     endif.
What could cause the problem by selecting only 0Material when checking the InfoCube 0PUR_C01 content? What does that mean by this STOP msg "Settings for material number conversion not found"?
Thanks

Hi Kevin,
Set the length of 0MATERIAL and change conversion to alpha:
Re: Error Installing 0MATERIAL from Business Content
Best regards,
Eugene

I cannot pay for online number before and after it...

Hello! I've got problem with payment for online number already several days. I cannot make payment for this. And my online number became expired. And I cannot use it already. I still can't pay for this. I see this message already about week like: "
Oops, something went wrong...
We're having technical problems. We're sorry for the inconvenience. Please try again after a few minutes.
Thank you.".
That's number is important for me. How I can solve this problem?
Thank you.

Same **bleep** problem here. How do I pay for a number that won't let me pay?? This is a business number!!

Settings for material number conversion not found

"Settings for material number conversion not found"
This is the error that came out. I was everytime i try to access the activated business content 0material, the system comes up with this error. Please help me with this! Thank you!
-Peter

Hi Peter,
try oss note 555675, it tells you to use transaction OMSL.
regards
Siggi
Message was edited by: Siegfried Szameitat

Ideal BIOS Settings for online gaming

this is my 1st computer that i built. i have a lot of experience in wiring high-end electronics, so wiring this little rig with barely any visible wires/cables was a breeze. I bought the processor/mobo with the intention of only doing minor O/C as i dont really know all that much on the hardware side of improving performance. with that said, i've searched for timings and settings for my specific combination, and i cant find any. again, i dont really want to push the config past a safe level, as i will be selling this machine when the 64's come down in price. can someone help me set the proper frequencies/timings? i have a lot to learn, and even in the normal bios settings i don't know if certain things should be enabled or disabled for my main purpose, which is to simply play 3D online games very fast. i will be changing out the GeforceFX5200 PCI for a 5600 AGP in a week or so. I'm noticing that my old Comcrap PIII 1.0Ghz w/512SDRAM with this video card gets just as good a ping ingame as this rig does. the machine starts quickly, runs offline programs quickly, but online it isnt as fast as i'd hoped. from what i've read in the other forums, there are many settings in the bios that are enabled by default that don't need to be. can someone help me decipher which settings are useful and which are not. i loosely understand some of the settings but if someone could help with the questions below and/or do a walkthru for bios geared toward gaming i'd really appreciate it. The machine runs very cool (CPU 104*F/SYS 93*F) but i dont know what else needs adjustment. I simply want to make this machine go as fast and as hard as it can with the right config. i don't want to unlock the processor yet or do anything else major at this point.
1: Best yet safe Voltage for my processor and RAM
2: FSB clock; 133 or 166? had problems @ 200
3: S.M.A.R.T. on or off?
4: Best IRQ/PCI slot for video card
5: "GoodMEM" utility: how much should i safely allot?
6: Video BIOS Cacheable?
7: Multiplier setting for K7N2DeltaL & XP2600+
8: VGA Aperture (my card is 128MB but PCI. upgrading soon)
i'll be learning more as i go along, so i dont really need a full explanation of what's what, lol THIS TIME. all i need is a rundown where someone tells me what to leave alone, and what to change for a very fast yet safe gaming rig

OK I'm officially confused.
I bought the retail boxed AthlonXP2600+, which clearly states on the packaging "With 333 MHZ Frontside Bus". i bought the board over others, one reason being it supported 400MHz FSB. I go into "Advanced Chipset Features" and when i set the "System Performance" to "Manual", i can then go into the "CPU FSB Clock" settings, but the max it will allow me to go to is 233MHz (which won't boot and i have to flip the jumpers. when i had set it to 200MHz before, it failed to boot as well... PLEASE can someone look over these settings and tell me the OPTIMAL settings for taking this combo as fast as it can go w/o overclocking? What am i doing wrong? what multiplier do i need to be at. I'm under the impression that the combo works best when the clock speed of the board is at the same speed as the processor. here are the BIOS settings with which i need advice:
ADV. BIOS
Virus Warning [Disabled]
External Cache [Enabled]
Quick Boot [Enabled]
1st Boot [Floppy]
2nd Boot [HDD]
3rd Boot [CD]
Boot Other Device [Enabled]
Swap Floppy [Disabled]
Seek Floppy [Enabled]
Boot Up Num Lock LED [On]
Gate A20 Option [Fast]
Typematic Rate Setting [Disabled]
Security Option [Setup]
APIC Function [Enabled]
MPS Table Version [1.4]
BOOT OS/2 for DRAM>64MB [No]
HD S.M.A.R.T. [Enabled]
Video BIOS Cacheable [Enabled]
ADV. CHIPSET
System Performance [High Performance]
CPU FSB Clock [166MHz]
AGP 8x Support [Enabled]
AGP Fastwrite Support [Enabled]
System BIOS Cacheable [Disabled]
Video RAM Cacheable [Enabled]
AGP Aperture Size [128MB]
I do currently have a PCI GeForceFX5200 8o, but im getting an AGP FX5600 this week. i know my card has nothing to do with AGP, but i've left most of the AGP settings alone since i'll be using it later. is this creating a bottleneck or tying up system memory to have it this way for now?
FREQUENCY/VOLTAGE CTRL
AGP Clock Value [Default]
xAGP Clock Value [66]
AGP Voltage Adjust [1.5V]
DRAM Voltage Adjust [2.7V]
CPU Ratio [By H/W]
CPU Vcore Select [By H/W]
PCI Clock Auto-Detect [Enabled]
Again, I have an 333MhzFSB Chip and a board that will support up to 400MhzFSB. help!

Make Flash Plug-In for Firefox Remember Privacy Settings for Camera and Mic Access on Local File

My company is using Flash Player to develop some kiosk-style applications to run on a standalone computer (no network connection). This computer will contain web pages containing Flash content. They will be opened from the local HD with Firefox with the Adobe Flash plug-in (v11.7.700.224). One of the applications accesses the microphone hooked up to the computer. When this application is started, it always asks for permission for "local" to access the microphone and camera. In previous versions of our system, we could click "Remember" if we did it once and that would make it so it wouldn't ask for permissions again (in this case, the Remember option isn't available, and the site settings don't even offer the Privace tab). However, in the previous case, we were running IE with a previous ActiveX Flash version (unfortunately, this approach is no longer available as we have had to switch to Windows 8 and that changes the game with IE and Flash entirely).
At this point, we have tried to use the Global Settings for "Camera and Microphone Settings by Site..." to enter "Local" as an always allowed site. This does not seem to have any effect. We also tried entering the root directory of the applications in "Trusted Location Settings", but that also seemed to have no effect.
I'm not sure what has fundamentally changed here. I think there might be some differences in the Plug-In version (compared to ActiveX), but I'm not sure what they might be or how to do the same thing as before.
Any help would be appreciated. Thanks in advance.
Torrey

Chris,
We learned that the Privacy tab (in Settings) can be found under the Flash plug-in for Firefox, but only if Firefox is running under an administrator.
Unfortunately, we haven't had much luck with the mms.cfg file. The following was used in the mms.cfg file (placed in both the %WINDIR%\SysWow64\Macromed\Flash and %WINDIR%\System32\Macromed\Flash” directories):
AVHardwareDisable = 0
AVHardwareEnabledDomain = local
AVHardwareEnabledDomain = 127.0.0.1
AVHardwareEnabledDomain = localhost
AutoUpdateDisable = 1
The AVHardwareEnabledDomain settings seem to be getting ignored regardless of whether the user is a standard user or an administrator. I also checked to make sure it wasn't just a local problem by going to a website that uses a microphone (http://www.testden.com/accent-reduction/systemcheck.htm). Adding the requested domain to the list (AVHardwareEnabledDomain = train.act360.com) still didn't bypass the allow/deny dialog box.
We know that the mms.cfg file is being read because setting "AVHardwareDisable = 1" will result in no prompt and that section being greyed out in Global Settings. I saw a post that suggested this setting was required to even make the AVHardwareEnabledDomain work, but it seems to block the local entirely and still brings up the dialog query on the internet site.
Thanks,
Torrey

How can I edit the privacy settings for my daughters Apple ID.

My daughter has forgotten her privacy settings. She has $80 in credit and would like to use them. How can she edit her privacy settings?

What do you mean by 'privacy settings' ?
If you mean the Settings > General > Restrictions passcode on her iPad then was it on the iPad when she last backed up ? If not then she can restore to that backup and it should be removed. If it was on the iPad when she last backed up then the only way to remove it is to reset the iPad back to factory defaults and she can then re-sync your content back to her iPad - she won't be able to restore to the backup as that will keep the code in place.
If you mean the answers to her security questions, then if she has a rescue email address (which is not the same thing as an alternate email address) on her account then the steps on this page will give you a reset link on her account : http://support.apple.com/kb/HT6170
If she doesn't have a rescue email address (she won't be able to add one until she can answer her questions) then sher will need to contact Support in her country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if she doesn't already have a rescue email address) sher can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
If you mean something else ... ?

Discount for online number available?

Hello,
I am thinking about purchasing a Skype online number for my UK business.
At the moment, it says on Skypes website that there is a 50% discount for existing subscribers. I think this does not apply to me because this would be my first online number.
But I remember that there was some offer a while ago where you were able to receive credit towards your other subscriptions when buying an online number.
Can anybody please help and tell me what is the best and cheapest way to get the online number or if there are any promotions or discounts currently available , hidden on Skype's website??
I apprciate your help!
Marko

Please take a look at this thread: http://community.skype.com/t5/Online-Number/Skype-Online-s-Prices-and-Discounts/td-p/175740
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Disable Privacy Settings for Local Application

Hi,
Is there a configuration / policy file that can be used on a
user's local machine to disable the privacy settings dialog that
pops up asking "Allow / Deny" for a Microphone?
Our application is distributed on the client from an
installer that must be run with administrative rights, I need to
find a way to disable this from showing since the user is
implicitly allowing us access to their microphone; after all the
software is developed specifically for audio recording.
Thank you,
- Justin

Chris,
We learned that the Privacy tab (in Settings) can be found under the Flash plug-in for Firefox, but only if Firefox is running under an administrator.
Unfortunately, we haven't had much luck with the mms.cfg file. The following was used in the mms.cfg file (placed in both the %WINDIR%\SysWow64\Macromed\Flash and %WINDIR%\System32\Macromed\Flash” directories):
AVHardwareDisable = 0
AVHardwareEnabledDomain = local
AVHardwareEnabledDomain = 127.0.0.1
AVHardwareEnabledDomain = localhost
AutoUpdateDisable = 1
The AVHardwareEnabledDomain settings seem to be getting ignored regardless of whether the user is a standard user or an administrator. I also checked to make sure it wasn't just a local problem by going to a website that uses a microphone (http://www.testden.com/accent-reduction/systemcheck.htm). Adding the requested domain to the list (AVHardwareEnabledDomain = train.act360.com) still didn't bypass the allow/deny dialog box.
We know that the mms.cfg file is being read because setting "AVHardwareDisable = 1" will result in no prompt and that section being greyed out in Global Settings. I saw a post that suggested this setting was required to even make the AVHardwareEnabledDomain work, but it seems to block the local entirely and still brings up the dialog query on the internet site.
Thanks,
Torrey

No email confirmation.after paying for online numb...

Hi,
i just ordered an online number
Order number 619399087
have not got any activation email or what so ever, would you please have a look at this.
Thanks.

Hi would you please have a look at this it's been more than 2 days.
if i have not got a reply back from you i am asking for a charge back.
please send me an email !!!

GPO for changing privacy settings for Internet Zone

Hi I want to change the privacy setting for the Internet Zone from Medium to Low. Can't seem to find the right location in the GP. Can someone please point me in the right direction.

Hi,
If we want to change the privacy setting for the Internet Zone from Medium to Low via Group Policy, please navigate to
User Configuration - Windows Settings - Internet Explorer Maintenance – Security
in GPMC. On the right-pane, please double-click Security Zones and Content Ratings. On the dialog box, we should choose "Import the current security zones and privacy settings" under
Security Zones ad Privacy and click Modify Settings
to modify the level.
The article Ravikumar provided is very useful to us for configuring the settings via Group Policy, please also refer to it.
Regards,
Andy
Using IE maintenance is the old way which I don´t recommend when implementing IE9 or newer. I wonder, why there is no way to configure this with traditional GPO?

Ask for online number

Hi, I'm from Vietnam and I would like to buy the AUS online number just to receive the call only. Do i just need to pay the quarterly or yearly subcription fee only or I'm also charged when receiving any call from this skype online number. Thanks, Kevin

Hi Kevin,
You are not charged for calls when you recieve on skype from an 'online' number.
skype calls may be recieved to your computer, laptops, any other device that you can download 'skype'.
hope this helps .
PBB

Call rates for Online number

For calling on a US online number from another country lets say Japan, will be charged same as calling from a Japanese landline to US landline?

sanaaqib wrote:
For calling on a US online number from another country lets say Japan, will be charged same as calling from a Japanese landline to US landline?
Yes.
Skype call charges depend only on the country you are calling TO. The geographic origin of the call is irrelevant.
To call both landlines and cellphones to (and within) the United States from anywhere costs 2.3 cents per minute or part thereof.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Charge twice for online number and it's not saying...

I paid for the online number twice and is trying to charge me again for it... I should have reactivated it already. What's going on??

Contact Adobe directly and see if they will accomodate you. Start Here If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

Available area codes for Online Number

Hi
im after an Online Number for the UK, but my desired area code, Southend (01702), is not listed.
Am I able to get a Skype number starting 01702 or is this simply not availble?
kind regards,
Giles.

sorry had to do tihis forgot to click the email me when someone replies to above post lol so plz reply to above post thanx

Privacy settings for Online Number

Similar Messages

Maybe you are looking for