Privacy settings not working for me

Hi, I'm Jan and this is more or less my rage.
I THOUGHT Skype had privacy settings, cause I wanted to change some today and I went to check profile settings on my desktop software and show full profile and suddenly at the right edge I see the bane of my existance when privacy is considered. ALMOST EVERYTHING IS GREYED OUT AND SET TO PUBLIC! ARE YOU FREAKING MENTAL?! I'd like most of my info set to contacts only, thankyouverymuch. SO WHAT?! If I want to hide who I am until I am certain I want to tell somebody that information, I should commit identity fraud and FAKE ALL OF MY INFO?! WHY WOULD YOU EVEN CONSIDER DOING IT?! IS OUR PRIVACY WORTH ANYTHING TO US?! I realize that Skype has been through the gutter since it got bought out by Microsoft, but really? You can't manage not showing certain information? EVEN FACEBOOK WHO OWNS ALL THE INFO I PUT ON THERE HAS A "HIDE YOUR INFORMATION TO NON-FRIENDS" SETTING!!! I have a feeling I'll be searching for a new IM and net-calling provider soon, if this doesn't get fixed...
To be honest, I've been patient with every crash, every freeze, every update that looked more hideous than the previous, but this is the last straw.

Thanks for reply. Have done this already. Been spending 48 hours solving all the hardware issues that iOS 7 has caused. I have hardware issues that I never had before update. Had my beef with apple customer service that resulted in Apple being very keen on charging me £200+ for fixing iPad or advising me to buy anew iPad.
Result is that microphone is dead since update after resetting to factory setting 3 times!
Xmas will buy a nexus or samsung, fed up with the bad customer service, the poor software updates, 2 years for a £500 iPad is a bad return on money.
Apple take note!

Similar Messages

  • Privacy Settings Not Working

    Issue: Non-contacts are able to send me an IM when they are not on my contacts list.
    On my other account, "Only allow people in my Contacts list to contact me" is selected, but I have recieved their IM "are you online?" from two different people who are not on my contact list. I have blocked and reported scam for both of these people.
    The privacy settings appear to be malfunctioning.
    P.S. I do not post with my main account where this issue is occuring because I wish to be unsearchable as much as possible.

    I have the same problem and it is obnoxious.

  • GoPro Camera Raw Lens Profile settings not working for image sequence in Photoshop/AE/Premiere CS6

    Hey Everyone,
    I'm in need of assistance in either Photoshop CS6, After Effects CS6, or Premiere Pro CS6.  I just installed the trials after seeing Russell Brown demo the GoPro Lens Profile correction feature in Camera Raw.  Basically what I'm looking to do is make adjustments (in Adobe Camera Raw) to a series of still images (shot with the time-lapse mode on the GoPro) and then either export those stills through Photoshop or Bridge to a temporary movie file that will be imported into a timeline (with other video clips), or import the JPG files (with Camera Raw settings) directly into After Effects or Premiere as an image sequence.  The latter would be preferable as it'd avoid the extra step of having to render the intermediate/temporary movie file.
    Right now, my current workflow for GoPro time-lapses is:
              - use Bridge CS4 to do basic color correction on the still images
              - save those as TIF files
              - run the TIF files through a custom script to have Hugin 2012.0.0 (open source pano stitcher) remove the fisheye distortion
              - open the new TIF image sequence into QuickTime Player 7 (Pro)
              - export the image sequence as a QuickTime movie file
              - import the movie file into Premiere Elements 10 to place on a timeline with other video clips (as Premiere Elements can't handle the sequence(s) of thousands of still images without crashing)
    If I can go directly from Bridge to a timeline, it'd save a lot of processing time (and it'd be much nicer to preview the images in Bridge without the fisheye distortion)!
    I can prepare the GoPro JPG files through Adobe Camera Raw in Bridge CS6, though when I go to import the JPEG image sequence into Premiere Pro CS6 or After Effects CS6, none of the Camera Raw settings are applied.  If I export the Camera Raw files in Bridge CS6 as DNG files (a step I'd really prefer to avoid) and then import the DNG image sequence into After Effects CS6, the Camera Raw settings are applied except for the Lens Profile settings -- I can pick other cameras but not the GoPro lens profiles when the DNG image sequence loads in After Effects.  It also appears that once I open the DNG files in After Effects CS6, I can no longer access the GoPro Lens Profile in Adobe Bridge CS6 -- the list changes to the same list I get in After Effects.  Premiere Pro CS6 doesn't let me import the DNG files at all.  I've also tried to import the JPG files (as well as the converted DNG files) into an image sequence in Photoshop CS6, though it doesn't allow me to do so (the Image Sequence checkbox is grayed out after I apply the Camera Raw settings in Bridge).
    There could be an issue going on with different Camera Raw versions.  I didn't have Premiere Pro CS6 installed during my initial testing, though now do notice that the Camera Raw dialog in Bridge CS6 only lets me choose compatibility up to "Camera Raw 7.1 and later" when I choose to export the files as DNG.  I thought Camera Raw 8.2 was an option there a couple days ago when I only had installed Photoshop CS6 and After Effects CS6 (though am not 100% certain).
    Please let me know if there is some workaround to get the GoPro lens profile Camera Raw corrections applied in an image sequence in one of the Adobe CS6 products (without having to export the files as temporary TIF or JPG files out of Camera Raw).  I'd greatly prefer to shorten my current workflow for these files.  (I just updated the CS6 trials and have tested all three programs again though I still get the same results described above.)
    Does Lightroom 5 have any option to export Camera Raw image sequences as movie files (or any other feature that might help in simplifying my current workflow)?  I can't install the trial right now as it's not compatible with OS X 10.6.8.  I'd consider upgrading OS X if I knew Lightroom 5 would do what I need, though am waiting for any potential color profile issues to be resolved in OS X 10.9.
    I can open the image sequence in Photoshop CS6 if no Camera Raw settings are applied and then use the Lens Correction Filter to apply the GoPro Lens Profile settings, though I really prefer the Camera Raw interface in Bridge for tweaking image settings.  As soon as I apply Camera Raw settings to the first image, Photoshop CS6 grays out the image sequence checkbox.
    If there isn't a way to take Camera Raw files straight from Adobe Bridge to a timeline, I may stick with my current workflow using CS4 and see what I can do to better automate some of the steps as the TIF export in Bridge, fisheye distortion removal in Hugin, and render in QuickTime Player all take quite a while.  I won't mind waiting for all the processing if I can set it and check back on it in later the next day when it's fully complete.  Is there a way to have Adobe ExtendScript execute an external shell command (i.e.: a command I could type into the bash shell in Terminal in OS X)?  If not, is there a way to call/run an ExtendScript script from the command line and pass a parameter to it that my custom script could use?
    Thanks in advance,
    Mark

    Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

  • Fallback Settings Not working for Non-Agreement Senders

    I am trying to test the fallback settings for X12 in Biztalk 2010.  I am processing an 837P and have one agreement in place that is processing files correctly when file is from the 'from' party of the agreement.  I am trying to use fallback to
    process files that are from a sender that is not part of the agreement.  I have enabled fallback and configured correctly as far as I can see.  When I send this type of file thru, I get these warning/errors in the event viewer - any thoughts?
    Error encountered during parsing. The X12 transaction set with id '' contained in functional group with id '125482', in interchange with id '000125482', with sender id '      382674344', receiver id '38-6004862    
    ' is being suspended with following errors:
    Error: 1 (Miscellaneous error)
     6: Finding the document specification by message type "http://schemas.microsoft.com/BizTalk/EDI/X12/2006#X12_00401_837" failed. Verify the schema deployed properly.
     A message received by adapter "FILE" on receive location "837_Receive_Location" with URI "c:\837\*.txt" is suspended.
     Error details: An output message of the component "Unknown " in receive pipeline "Microsoft.BizTalk.Edi.DefaultPipelines.EdiReceive, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" is suspended due
    to the following error:
         Error encountered during parsing. The X12 transaction set with id '' contained in functional group with id '125482', in interchange with id '000125482', with sender id '      382674344', receiver id '38-6004862    
    ' is being suspended with following errors:
    Error: 1 (Miscellaneous error)
     6: Finding the document specification by message type "http://schemas.microsoft.com/BizTalk/EDI/X12/2006#X12_00401_837" failed. Verify the schema deployed properly.
     The sequence number of the suspended message is 1. 
     MessageId:  {D2CC89CA-5080-48E6-A9BF-7ABF6F37E9F2}
     InstanceID: {E2416749-D653-461B-9B7D-54AA47F75D00}
     Agreement Resolution for x12 Protocol based on the context properties DestinationPartySenderQualifier with value "ZZ", DestinationPartySenderIdentifier with value "38-6004862", DestinationPartyReceiverQualifier with value "ZZ" and DestinationPartyReceiverIdentifier
    with value "382674344" has failed.
     There was a failure executing the send pipeline: "Microsoft.BizTalk.Edi.DefaultPipelines.EdiSend, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "EDI Assembler" Send Port: "837 Send 997"
    URI: "C:\837\ack\997_%SourceFileName%_%MessageID%.txt" Reason: Agreement Resolution based on the context properties for x12 Protocol has failed.
     Agreement Resolution for x12 Protocol based on the context properties DestinationPartySenderQualifier with value "ZZ", DestinationPartySenderIdentifier with value "38-6004862", DestinationPartyReceiverQualifier with value "ZZ" and DestinationPartyReceiverIdentifier
    with value "382674344" has failed.
     There was a failure executing the send pipeline: "Microsoft.BizTalk.Edi.DefaultPipelines.EdiSend, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "EDI Assembler" Send Port: "837 Send TA1"
    URI: "c:\837\ack\TA1_%SourceFileName%_%MessageID%.txt" Reason: Agreement Resolution based on the context properties for x12 Protocol has failed.
     A message sent to adapter "FILE" on send port "837 Send 997" with URI "C:\837\ack\997_%SourceFileName%_%MessageID%.txt" is suspended.
     Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.Edi.DefaultPipelines.EdiSend, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "EDI Assembler" Send Port:
    "837 Send 997" URI: "C:\837\ack\997_%SourceFileName%_%MessageID%.txt" Reason: Agreement Resolution based on the context properties for x12 Protocol has failed. 
     MessageId:  {D053BF43-B315-48C9-9024-842FE53B9906}
     InstanceID: {0732CFD5-A997-4704-9D29-B273E104486A}
     A message sent to adapter "FILE" on send port "837 Send TA1" with URI "c:\837\ack\TA1_%SourceFileName%_%MessageID%.txt" is suspended.
     Error details: There was a failure executing the send pipeline: "Microsoft.BizTalk.Edi.DefaultPipelines.EdiSend, Microsoft.BizTalk.Edi.EdiPipelines, Version=3.0.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "EDI Assembler" Send Port:
    "837 Send TA1" URI: "c:\837\ack\TA1_%SourceFileName%_%MessageID%.txt" Reason: Agreement Resolution based on the context properties for x12 Protocol has failed. 
     MessageId:  {A5BD0F9D-8AEC-4C33-A194-59EF0C619F87}
     InstanceID: {877126CD-1630-4FC9-9D30-F2EAA4AB09E7}
    Mike Dugan

    Hi Mike,
    For the error " Finding the document specification by message type "http://schemas.microsoft.com/BizTalk/EDI/X12/2006#X12_00401_837" failed."
    Can you check out the section for X12 Schema Discovery in the following link
    http://msdn.microsoft.com/en-us/library/bb246089(v=bts.70).aspx. As you are using 4010A1 837_P, your incoming document should have 004010X098A1 at GS08. Or if providing  004010X098A1 at GS08 is not a requirement for your other partners,
    then I would recommend you to deploy 837_P schema by removing `_P` extension at the root node, such that the schema that you have deployed would be "http://schemas.microsoft.com/BizTalk/EDI/X12/2006#X12_00401_837"
    and that is what EDI Receive pipeline would look for.
    Regarding the other error for the 997 and TA1 documents failing with "Agreement Resolution based on the context properties for x12 Protocol has failed.". It is a new constraint that we have imposed on the EDI users in BizTalk 2010 that the 997/TA1
    that gets generated in EDI Receive Pipeline for an incoming document should resolve to an agreement with Sender and Receiver Identities which are the reverse of the Sender and Receiver Identities (ISA 5 6 7 8) in the incoming document. EDI Receive Pipeline
    would promote the following context properties DestinationPartyReceiverIdentifier, DestinationPartyReceiverQualifier, DestinationPartySenderIdentifier, DestinationPartySenderQualifier and EDI Send Pipeline has to do Agreement resolution based on them. Hence,
    there has to be an agreement with those particular identities otherwise the acknowledgements would fail. For your scenario I dont see any other way for you other than writing a custom pipeline component to remove those context properties by nullifying the
    values of the above mentioned context properties for all the messages with MessageType is
    http://schemas.microsoft.com/Edi/X12#X12_TA1_Root or
    http://schemas.microsoft.com/Edi/X12#X12_997_Root such that the messages would resolve to fallback settings. For more details on Agreement Resolution in EDI Send Pipeline please go through
    the link
    http://msdn.microsoft.com/en-us/library/bb259945(v=BTS.70).aspx
    Thanks,
    Kowshik Palivela

  • Content Server Settings not working (for PPM)

    Hi,
    We are on PPM5.0.
    We have set up the Content Server settings according to the PPM
    configuration guide.
    We, however, still see the documents (uploaded in the project) showing
    up on the PPM Server.
    We checked the entries in table CFF_CONT (in the PPM server), and see
    the contents updating when a document is uploaded. This makes us
    conclude that the documents are still not being stored on the Content
    Server.
    Any switch/flag that needs to be set/reset in the WAS and/or Content Server that'll help??
    Or anything else...???
    Thanks.

    Earl Powers BSR2751547 Thank you all. your suggestions really helped.

  • I have an Iphone 4 and my internet has not worked for a good 10 months, why wont it work? my dad pays for my data plan, so its not that i dont pay my bill. I've even tried to reset my net work settings, and that did not work

    i have an iphone 4 and my internet has not worked for a good 10 months, why wont it work? My dad pays for my data plan, so its not that i dont pay the bill. I've even tried to rest my net work settings, and that did not work. I went to AT&T and they said that the only way to fix it was to buy a new phone, and im not going to buy a new phone with out my upgrade. someone, please help!

    Hey lilmissindian!
    I have an article for you here that will help you troubleshoot this issue:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • IPhone 6 External Mic not working for Siri/Dictation

    I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation.  When I plug in the earbuds, they work for everything (including Siri/Dictation).
    Was chatting to Apple support who had me reset all settings.  I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works).  When I turned Siri back on, it does not work.
    I have two questions for the community to see if you can help:
    1- I have been assuming this must be a software problem since the mic does work for non-Siri access.  But is that true?  Is there a hardware component that Siri depends on which could be faulty here?
    2- If it is software, what action should I try to address it?  I have done a reset all settings already and that did not help.
    Doug

    Hi, everyone.  I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again.  I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test.  If you can hear your voice recording clearly, then the mic works.  I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work.  So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls.  Will need to go back to Apple Genius this weekend for sure.  Will give update after the weekend.

  • CALLER ID not working for International incoming calls

    Hi,
    I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
    Any clue?

    yashshankar wrote:
    Hi
    I recently  purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
    Regards
    Yash
    You didn't mention what country your Online Number is in.  Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages.  If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way.  Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
    To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page.  You'll see a screen that would include your current Caller ID settings, and a link to change that.  If your Online Number is from one of those countries I referenced above, just select it and you're done. 
    Hope that helps!
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • LSMW For Converting Open Sales Orders (not working for more than 1 item)

    Hi,
    I am using following standard object for Open sales orders .
    Object               0090   Sales documents                   
    Method               0000                                     
    Program Name         RVINVB10                                 
    Program Type         D   Direct Input                         
    Its not working for more than 1 line item.
    For more than 1 line item its giving Error saying that
    '102122                         V1                   845
    Print parameter SAPML2 1 is not defined
    Can anybody help me out in this regard.
    Thanks in advance.
    Nitin.

    hello, friend.
    i will still research the subject.  but the first thing that comes into my mind is t-code VA05.  with this, you have the option to change the Plant en masse.  so a possible workaround is for you to list a number of sales orders using VA05.  you then sort the line items by Plant.  choose all items with the same plant, change the plant via mass change... then change back to the original plant.  hopefully, the new settings should apply.
    do test a few sales orders by doing this for a larger scope.
    regards.

  • Voicemail notifications not working for iphone 4s

    voicemail notifications not working for iphone 4s

    I had the same problem and after a lot of research here and on Verizon I finally discovered that it was an app named Onavo Extend that was preventing my voicemail from working. Other people have had success resetting their phone or network settings, disabling and reenabling SIRI, or deleting the Neilsen app (which I didn't have)  but those options didn't work for me. A lot of mods have claimed that this is not an Apple problem but if it is caused by an app that Apple allows to be sold in their app store, then it is an Apple problem, not a carrier problem. Of course, sometimes its just an ID 10 T problem.

  • Remote Desktop and Windows Firewall Settings Not Working,

    Hi to all....
                 In My office am using Windows 7 ultimate x64 OS,Remote Desktop is Not working for Reason is Firewall is Turn on,i go  to Control Panel Settings to turn off the Firewall,But Firewall Setting are Not Working
    i Traced the Event Viewer its shows Error Code 5, Am search any patches for this error but cannot find it, Any one Advice Me.....i Hope Your Valuable Reply.....

    Hello,
    this forum is related to Windows Server. For Windows 7 please ask in
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

    Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

    No sound form :
    - Speaker?
    - Headphones?
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Additional Fields for ESS-Business Card Not Working for Certain Countries

    Dear Experts,
    We were trying to configure the additional fields to be displayed in Business Card - Overview Screen for all countries. We don't have problem configure and get the new fields display for Malaysia (Molga = 14) but having problem for the field to display for Hong Kong (Molga = 27) and Singapore (Molga - 25).
    The strange thing is I am following the same steps as I configured for Malaysia. Somehow it is not working for Hong Kong and Singapore. As I understand, there is only 1 place to configure in SPRO for this requirement:
    Personnel Management -> Employee Self-Service -> Service-Specific Settings -> Own Data -> Customizing of Personal Information Screens -> Determine Fields for Business Card on Overview Screen
    Please help!

    Hi Siddhart,
    Thank you for the information. We are currently in EhP3 with below Support Components installed.
    Software Component: SAP_HR
    Release: 600
    Level: 60
    Highest Support Package: SAPKE60060
    Software Component: EA-HR
    Release: 603
    Level: 34
    Highest Support Package: SAPK-60334INEAHR
    The note 1159911 provided is within SAPK-60304INEAHR. Thus, I don't think this is the root cause of this inconsistency base on the Highest Support Package installed in our system.
    Anymore hint? Anyone? Please...

  • People picker is not working for ie11 but working fine for other lower version

    i am using sharepoint 2010 and windows authentication
    recently i have updated my ie to ie11 and problem goes here.
    when i try to select from people picker, there are an unexpected error happened 
    however when i use other ie version, people picker work fine, what goes wrong?
    i have already added my system as trusted site
    if there any others thing i miss out?

    Hi,
    According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
    IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
    first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
    add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
    add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
    You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • SSO is not working for SAPGUI for HTML

    Hi Experts,
    We have configured SSO between EP and ECC.SSO is working fine for SAPGUI for windows.But it is not working for SAPGUI for HTML.
    Workflow iViews are getting error.
    "SWITCH to HTTPS does not occur."
    The domain names are different for EP and ECC.
    Please let me know ,is there any settings need to check.
    Regards,
    Bala.

    Hi
    The point here is that your Portal server is on a different domain, so you have to configure the logon ticket issuer (portal) to generate logon ticket for multiple domains.
    http://help.sap.com/saphelp_nw04s/helpdata/en/a0/88a340fa432b54e10000000a1550b0/frameset.htm
    Best regards
    Johann

Maybe you are looking for