Private Area not Created in cFolders

I assigned a collaboration folder (competitive scenario) while creating a Bid Invitation. This creates a public area and I added a document. The bid invitation is then published.
Now when bidder creates a bid, private area is not being created in cFolders.
Am I missing some specific settings here or is this a roles issue?
Please let me know what roles have to be assigned to the bidder so that he can create a new folders/documents in private area.

Hi Sreenivas,
Once you create a new collaboration in competetive scenario by default public area will be created.
To create private area, click on that collaboration then under 'Work Areas' create new work area. This will become private area. Then assign authorizations to this private area to any one of the vendors.
Reward points if useful.
Regards,
Laxminarasimha

Similar Messages

Purchase requisitions are not created for Component by MRP

Hi,
I have created planned orders for assy. When I run the MRP the purchase requisitions are not created by MRP for the components. If I check the planned order the components tab is showing all the raw materials list as per the BOM. The master data tab shows the BOM,Routing,Production version etc. But when I run the MRP the components planned orders/purchase requisitions are not created. There is no stocks available for the components in the plant, still the purchase requisition are not created by MRP.
I have tried in both transactions MD01 and MD02.
I could notice one thing. Supoose if I enter 31.12.2009 is the order finish date, the system creates exception mesage 10- Rescheduling in with proposed date 01.12.2009. Why the system is propsoing rescheduling in with date 01.12.2009 which past date.
Please sugest.
thanks and regards
Murugesan

Hi,
I am using MRP type PD for assy and components. There is no planned orders for assy.
If I run MD02 the planned orders created for assy and purchase requisition are created for raw materials. But if I run MRP in MD01 neither the planned orders nor the purchase requisitions created.
I tried the Control keys NETCH,NEUPL but still the planned order and purchase requisitions are not created if I run using MD01.
Please suggest.
thanks and regards
Murugesan

Call items are not created for Org BP's when created from Campaigns

Hello All,
We are creating Campaigns for Org BP's and pushing them to channel Phone, which is creating call list but call items are not created for Org BP's.
Org BP's are maintained with Contact Person's, callling hours and phone number are maintained against contact person BP, but still call items are not created with in call list.
Please let me know if I miss any further steps.
Thanks,
Raj.

Hi Debasis,
You can delete the PDS by using /SAPAPO/CULL_RTO_DEL - Delete Production Data Structure . And recif the it to APO. You can use CURTO_CREATE for it.
For the error message /SAPAPO/OM_ERROR2 119 there are couple of OSS notes please check the same.
1648558 - CIF error: 'Mode linkage problem with primary resource'
1325227 - PDS-EXP: Mode linkage problem with primary resource
Regards,
RBrahmankar

Parameters are not created for M0001 feature

Hi Friends,
During Hiring activity in IT0002 after entering all the fields, while saving i got a warning message - parameters are not created in M0001 feature. Please give me your views & answers why i got this message.
Edited by: sharada vemula on Apr 4, 2010 11:31 AM

Hi,
Go to PE03 enter M0001
create a structure till Personal Area and enter **** unless you want to maintain Administrator group in here.
Hope this helps
Ajay

Backups of the JVM.CONFIG file are not created

Backups of the JVM.CONFIG file are not created.
CF10 > Server Settings > Java and JVM in part says:
Backups of the jvm.config file are created when you hit the submit button. You can use this backup to restore from a critical change.
CF10 Help page indicates jvm.bak will be created:
http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf3638e6-7ff c.html#WSc3ff6d0ea77859461172e0811cbf3638e6-7feb
Note Help indicates incorrectly JVM.CONFIG and BAK are in cf_root\runtime\bin where as JVM.CONFIG is located cf_root\instance\bin .
Thanks in advance, Carl.

I must have not had enough coffee - JVM.BAK is created in where JVM.CONFIG is found. Pardon me.

On oracleXE 10g installation, bdump, cdump, udump are not created

Hi all,
I installed Oracle XE 10g on my system successfully, but in
C:\oraclexe\app\oracle\admin
folder, bdump, cdump, and udump files are not created. Any help, what may be the reason will be appreciated.
Thanks in advance,
Pal

The SQL used to to create and configure a database excludes the ability to create the directories required. (unless using ASM)
This means that before running the dbcreate shell script (or equivalent), the directories need to be created via the o/s itself - usually a command line script.
The Oracle XE version for Linux combines this (the command line stuff and SQL stuff) into a single script in $ORACLE_HOME/bin/createdb.sh - I would expect that you will find a .cmd version of this for XE on Windows.
In this script, the mkdir command is used to create the required directories before the sqlplus is launched to create the database.
However, this script does not create separate bdump/adump/cdump/etc directories.
It creates the following 2 directories:
mkdir $logdir
mkdir $filedir
These are defined as:
filedir=$ORACLE_HOME/dbs
logdir=$ORACLE_HOME/log
Then it configures the init.ora for the db create as follows:
user_dump_dest=$logdir
background_dump_dest=$logdir
core_dump_dest=$logdir
audit_file_dest=$logdir
BTW, I suggest that you consider posting database questions in the [url http://forums.oracle.com/forums/forum.jspa?forumID=61]Database - General forum - this forum is specifically about the database SQL and PL/SQL languages. Not about db installation, configuration and so on.

Change number that are not created earlier accepted for change of BOM

Hi,
When i am going to change BOM it gives warning message "Enter change number, BOM has history requirement"
But my problem is when i put any number in field of change number it is allowing me to change the BOM.
It should not be accept any number that are not created earlier in the system. It must have to accept change number that is created for the history requirement for perticular material. kindly give your input on this issue.
Atul

Hi Atul,
Please refer the thread ECM-Problem with Change number in CS01 and CS02 Transactions
Thanks,
Rakesh J

Profitability Segments are not created for Invoices

Hi Guru's
Can any one help on this ?
"Invoice Documents Profitability Segments are not created" can you please suggest me?
Thanks,
Aakash

Hi Aakash,
I think you are trying to integrate FICA with CO-PA and then getting the error.
The posting of a contract accounts A/R & A/P document in CO-PA is dependent on-
(a) Activation of the operating concern in the SPRO node Controlling → Profitability Analysis →
Structures → Define Operating Concern → Maintain Characteristics
and
(b) CO short account assignment of the contract in the SPRO Node Financial Accounting → Contract
Accounts Receivable and Payable → Basic Functions → Posting and Documents → Documents
→ Define Account Assignments for Automatic Postings → Store CO Short Account Assignments
for IS-U Contracts.
In here, the system only carries out the posting if the Profitability Segment Assigned selected in CO
account assignment.
Hope it helps...
Thanks,
Amlan

Reservations are not creating for a stock item PO

Hi All,
I have an issue with reservations for a stock material PO,
Our's is extended classic scenario(BBP 3.0 & R/3 4.7), I have created a cart and approved the cart for a stock materials.
As per business process, for a stock materials reservations are to be created but here after cart approval, under follow on documents tab, I am not getting any reservation details except shoopping cart number and its approval status.
Can any one have idea on it?
Through me some light,
Thanks in advance,
Govardhan,V.

Hi. Reservations are not supported in extended classic.
Or at least they were not when I last asked SAP about 3 years ago.
Unless something has changed the only solution was to use the BADI BBP_EXTLOCALPO_BADI to deactivate extended classic if it is an item you want a reservation for.
You would then end up using the classic scenario for these reservation items only.
Regards,
Dave.

CO-PA for good issue documents are not created

Dear All
We are using both account & cost based CO-PA , actually the problem is this that when we are doing the sales cycle, after billing my CO-PA document created but the same when I do delivery COGS document not created ,actually for sales I am taking the sales data from condition type(assignment of condition type to CO-PA value filed) and for COGS , I have assigned the COGS GL accounts in TRANSACTION Code OKB9 (automatic determine the profitability segment) also the same GL accounts I have assigned with value field in
Assignment PA transfer structure
Now when I am doing sales cycle , CO-PA document has been created when I am doing billing but when I am doing Good issue , CO-PA not created but if I go and check the GL account of COGS account I found the all detail of my profitability segment which hit this GL account
Please help in this regard.
Regards
Kashif

I assume that problem relates to billing in make-to-stock scenario. Since COPA document is automatically created with billing. Please note the following -
1. COGS GL account is not created as cost element.
2. There is no CO / COPA document at the time of delivery.
3. Condition type VPRS should exist in SD pricing. It is updated form material master.
4. Condition type VPRS should be assigned to COPA value field (just like PR00 / price).
5. Revenue and COGS value fields are updated at the time of billing.
Hope it clarifies.
Regards,

Netlogon and SYSVOL shares are not created after DCPROMO in Windows 2012

Hi
When i run a dcpromo on my windows 2012 server (all dc's are windows 2012)
On the new domain controller i don't have sysvol or netlogon share.
All the sugestions i found in social refer to FRS but in server 2012 DFS is used, no idea how to troubel shoot this problem.
All dcdiag on all DC before promo where clean
dcidag on srv01 the new dc shows:
Doing initial required tests
Testing server: Bas\SRV01
Starting test: Connectivity
......................... SRV01 passed test Connectivity
Doing primary tests
Testing server: Bas\SRV01
Starting test: Advertising
Warning: DsGetDcName returned information for
\\SRV09.dikkenberg.local, when we were trying to reach SRV01.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... SRV01 failed test Advertising
Starting test: FrsEvent
......................... SRV01 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SRV01 passed test DFSREvent
Starting test: SysVolCheck
......................... SRV01 passed test SysVolCheck
Starting test: KccEvent
......................... SRV01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SRV01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SRV01 passed test MachineAccount
Starting test: NCSecDesc
......................... SRV01 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\SRV01\netlogon)
[SRV01] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... SRV01 failed test NetLogons
Starting test: ObjectsReplicated
......................... SRV01 passed test ObjectsReplicated
Starting test: Replications
......................... SRV01 passed test Replications
Starting test: RidManager
......................... SRV01 passed test RidManager
Starting test: Services
......................... SRV01 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 21:55:22
Event String:
The WinRM service is not listening for WS-Management requests.
An error event occurred. EventID: 0x00001001
Time Generated: 02/26/2013 21:58:10
Event String:
The machine SRV01 attempted to join the domain dikkenberg.local but
failed. The error code was 1332.
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 22:00:04
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 22:08:43
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x0000008E
Time Generated: 02/26/2013 22:10:22
Event String:
The time service has stopped advertising as a time source because th
e local clock is not synchronized.
A warning event occurred. EventID: 0x00001796
Time Generated: 02/26/2013 22:24:05
Event String:
Microsoft Windows Server has detected that NTLM authentication is pr
esently being used between clients and this server. This event occurs once per b
oot of the server on the first time a client uses NTLM with this server.
......................... SRV01 failed test SystemLog
Starting test: VerifyReferences
......................... SRV01 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dikkenberg
Starting test: CheckSDRefDom
......................... dikkenberg passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... dikkenberg passed test CrossRefValidation
Running enterprise tests on : dikkenberg.local
Starting test: LocatorCheck
......................... dikkenberg.local passed test LocatorCheck
Starting test: Intersite
......................... dikkenberg.local passed test Intersite
C:\Users\administrator.DIKKENBERG>
Dcdiag on good dc:
Performing initial setup:
Trying to find home server...
Home Server = SRV09
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Bas\SRV09
Starting test: Connectivity
......................... SRV09 passed test Connectivity
Doing primary tests
Testing server: Bas\SRV09
Starting test: Advertising
......................... SRV09 passed test Advertising
Starting test: FrsEvent
......................... SRV09 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SRV09 passed test DFSREvent
Starting test: SysVolCheck
......................... SRV09 passed test SysVolCheck
Starting test: KccEvent
A warning event occurred. EventID: 0x80000B46
Time Generated: 02/26/2013 22:42:36
Event String:
The security of this directory server can be significantly enhanced
by configuring the server to reject SASL (Negotiate, Kerberos, NTLM, or Digest)
LDAP binds that do not request signing (integrity verification) and LDAP simple
binds that are performed on a cleartext (non-SSL/TLS-encrypted) connection. E
ven if no clients are using such binds, configuring the server to reject them wi
ll improve the security of this server.
......................... SRV09 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SRV09 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SRV09 passed test MachineAccount
Starting test: NCSecDesc
......................... SRV09 passed test NCSecDesc
Starting test: NetLogons
......................... SRV09 passed test NetLogons
Starting test: ObjectsReplicated
......................... SRV09 passed test ObjectsReplicated
Starting test: Replications
......................... SRV09 passed test Replications
Starting test: RidManager
......................... SRV09 passed test RidManager
Starting test: Services
......................... SRV09 passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver Samsung CLP-320 Series required for printer Samsung CLP-320 S
eries is unknown. Contact the administrator to install the driver before you log
in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver DYMO LabelWriter 400 Turbo required for printer DYMO LabelWri
ter 400 Turbo is unknown. Contact the administrator to install the driver before
you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Verz
enden naar OneNote 2013 is unknown. Contact the administrator to install the dri
ver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:14
Event String:
Driver Microsoft XPS Document Writer required for printer Microsoft
XPS Document Writer is unknown. Contact the administrator to install the driver
before you log in again.
A warning event occurred. EventID: 0x000016AF
Time Generated: 02/26/2013 22:34:50
Event String:
During the past 4.24 hours there have been 20 connections to this Do
main Controller from client machines whose IP addresses don't map to any of the
existing sites in the enterprise. Those clients, therefore, have undefined sites
and may connect to any Domain Controller including those that are in far distan
t locations from the clients. A client's site is determined by the mapping of it
s subnet to one of the existing sites. To move the above clients to one of the s
ites, please consider creating subnet object(s) covering the above IP addresses
with mapping to one of the existing sites. The names and IP addresses of the cl
ients in question have been logged on this computer in the following log file '%
SystemRoot%\debug\netlogon.log' and, potentially, in the log file '%SystemRoot%\
debug\netlogon.bak' created if the former log becomes full. The log(s) may conta
in additional unrelated debugging information. To filter out the needed informat
ion, please search for lines which contain text 'NO_CLIENT_SITE:'. The first wor
d after this string is the client name and the second word is the client IP addr
ess. The maximum size of the log(s) is controlled by the following registry DWOR
D value 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameter
s\LogFileMaxSize'; the default is 20000000 bytes. The current maximum size is 2
0000000 bytes. To set a different maximum size, create the above registry value
and set the desired maximum size in bytes.
A warning event occurred. EventID: 0x0000000B
Time Generated: 02/26/2013 22:42:06
Event String:
Custom dynamic link libraries are being loaded for every application
. The system administrator should review the list of libraries to ensure they ar
e related to trusted applications. Please visit http://support.microsoft.com/kb/
197571 for more information.
A warning event occurred. EventID: 0x000727AA
Time Generated: 02/26/2013 22:43:09
Event String:
The WinRM service failed to create the following SPNs: WSMAN/SRV09.d
ikkenberg.local; WSMAN/SRV09.
A warning event occurred. EventID: 0x000003F6
Time Generated: 02/26/2013 22:43:11
Event String:
Name resolution for the name _msdcs.dikkenberg.local timed out after
none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000003F6
Time Generated: 02/26/2013 22:43:11
Event String:
Name resolution for the name dikkenberg.local timed out after none o
f the configured DNS servers responded.
A warning event occurred. EventID: 0x0000000C
Time Generated: 02/26/2013 22:43:13
Event String:
Time Provider NtpClient: This machine is configured to use the domai
n hierarchy to determine its time source, but it is the AD PDC emulator for the
domain at the root of the forest, so there is no machine above it in the domain
hierarchy to use as a time source. It is recommended that you either configure a
reliable time service in the root domain, or manually configure the AD PDC to s
ynchronize with an external time source. Otherwise, this machine will function a
s the authoritative time source in the domain hierarchy. If an external time sou
rce is not configured or used for this computer, you may choose to disable the N
tpClient.
A warning event occurred. EventID: 0x00001796
Time Generated: 02/26/2013 22:43:50
Event String:
Microsoft Windows Server has detected that NTLM authentication is pr
esently being used between clients and this server. This event occurs once per b
oot of the server on the first time a client uses NTLM with this server.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:12
Event String:
Driver Samsung CLP-320 Series required for printer Samsung CLP-320 S
eries is unknown. Contact the administrator to install the driver before you log
in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:16
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Verz
enden naar OneNote 2013 is unknown. Contact the administrator to install the dri
ver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:16
Event String:
Driver DYMO LabelWriter 400 Turbo required for printer DYMO LabelWri
ter 400 Turbo is unknown. Contact the administrator to install the driver before
you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:17
Event String:
Driver Microsoft XPS Document Writer required for printer Microsoft
XPS Document Writer is unknown. Contact the administrator to install the driver
before you log in again.
......................... SRV09 failed test SystemLog
Starting test: VerifyReferences
......................... SRV09 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dikkenberg
Starting test: CheckSDRefDom
......................... dikkenberg passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... dikkenberg passed test CrossRefValidation
Running enterprise tests on : dikkenberg.local
Starting test: LocatorCheck
......................... dikkenberg.local passed test LocatorCheck
Starting test: Intersite
......................... dikkenberg.local passed test Intersite
With kind regards, Bas van den Dikkenberg

Doing primary tests
Testing server: Bas\SRV01
Starting test: Advertising
Warning: DsGetDcName returned information for
\\SRV09.dikkenberg.local, when we were trying to reach SRV01.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... SRV01 failed test Advertising
"SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE"
this error means that the DC is in USN rollback state.
srv01 is not usn rollback see:
test from other DC:
Doing primary tests
Testing server: Ouders\SRV10
Starting test: Advertising
......................... SRV10 passed test Advertising
Starting test: FrsEvent
......................... SRV10 passed test FrsEvent
Test from srv09:
Doing primary tests
Testing server: Bas\SRV09
Starting test: Advertising
......................... SRV09 passed test Advertising
Starting test: FrsEvent
......................... SRV09 passed test FrsEvent
With kind regards, Bas van den Dikkenberg

Constraints are not created when using a cart

Hi all,
I have created a cart in SQL Developer with all the tables from HR schema. If I apply the cart to my database cloud service the tables and data are there but most of the constraints are missing.
In log I can see error messages like:
Error starting at line 5 in command:
ALTER TABLE "EMPLOYEES" ADD CONSTRAINT "EMP_DEPT_FK" FOREIGN KEY ("DEPARTMENT_ID")
      REFERENCES "DEPARTMENTS" ("DEPARTMENT_ID") ENABLE
Error report:
SQL Error: ORA-02270: no matching unique or primary key for this column-list
02270. 00000 - "no matching unique or primary key for this column-list"
*Cause:    A REFERENCES clause in a CREATE/ALTER TABLE statement
           gives a column-list for which there is no matching unique or primary
           key constraint in the referenced table.
*Action:   Find the correct column names using the ALL_CONS_COLUMNS
           catalog view
Primary key constraints are completely missing in the log.
I have tried it with option "Disable constraints before loading data" checked and unchecked.
How can I transfer the schema (tables, data, constraints) to my cloud service. I don't want to create the constraints manually because I have a web service which is based on the exact structure of HR schema in my local database.
Kind regards
Juergen

You should actually look at the headers first, IMO. Not knowing "what is going on in there" is a very bad reason to discard that solution. The Content-Type header is meant to indicate exactly the type of content you are getting (your want the text/html mime-type).
Not all servers report the correct content type all the time in this header so it won't be a 100% solution.
BTW, the Aperture project is specifically intented to extract content and metadata from various sources, including websites. You might be able to use that.

Listener and environment files are not created in New RDBMS ORACLE_HOME

Hi,
I am upgrading the EBS 12.1.3 database from 11.1.0.7 to 11.2.0.2.
I have completed the steps till Implement and run AutoConfig on Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]
I have completed AutoConfig on the Database tier successfully. But i doesn't find any listener files on <RDBMS_ORACLE_HOME> and similarly environment file.
These files are already available on OLD <ORACLE_HOME>.
Please suggest me if i miss any step.
Thanks
Nawneet

thanks for the prompt reply ...
while running the command
<RDBMS_ORACLE_HOME>\appsutil\bin\adconfig.cmd contextfile=<context_file> we got below error.
AC-00435: Unable to create directory :F:\app\mocppd\product\11.2.0\dbhome_1\
admin\prod_srv-moc\bdump
Raised by oracle.apps.ad.autoconfig.InstantiateProcess
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
      <filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
    Directory: F:\app\mocppd\product\11.2.0\dbhome_1\appsutil\install\prod_srv-moc
      adsvdlsn.cmd            INSTE8_SETUP       1060
AutoConfig is exiting with status 1
AutoConfig execution completed on Mon Feb 7 05:32:05 2011
Time taken for AutoConfig execution to complete : 0 mins 29 secsHow to correct the above one and should we proceed with the Step 24 "Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]"
Thanks
Nawneet

Seam (EJB3/JSF) App Deploys - but tables are not created, populated

Please let me know if you've run across this or have an inkling of an idea of what is going on here.
Description: I have created the JDBC Data Source and this deploys successfully. The JNDI Name for this data source is: "seam-jee5-ds".
I am using this JDNI name as the data source in my persistence.xml for the application. This data source is found when the application deploys. The data source itself is an embedded HSQLDB database, but I have also tried this with H2 and the result is the same.
The application works, I can open the page...but anytime there is a transaction with the database, the transaction fails. The error is that it can't find the table to query from, and fails w/ this exception:
javax.el.ELException: javax.ejb.EJBTransactionRolledbackException: EJB Exception: ; nested exception is: javax.persistence.PersistenceException: org.h
ibernate.exception.SQLGrammarException: could not execute query; nested exception is: javax.persistence.PersistenceException: org.hibernate.exception.
SQLGrammarException: could not execute query
+Caused by: java.sql.SQLException: Table not found in statement [select user0_.username as username2_, user0_.name as name2_, user0_.password as passwo+
+rd2_ from Customer user0_ where user0_.username=? and user0_.password=?]+
at org.hsqldb.jdbc.Util.throwError(Unknown Source)
The EJBs are recognized/discovered; example:
Aug 15, 2009 7:35:29 PM org.hibernate.cfg.annotations.EntityBinder bindTable
INFO: Bind entity org.jboss.seam.example.booking.Booking on table Booking
The persistence unit is configured:
Aug 15, 2009 7:35:29 PM org.hibernate.ejb.Ejb3Configuration configure
+INFO: Processing PersistenceUnitInfo [+
name: bookingDatabase
+...]+
Problem: When I then check the database (HSQLDB or H2), none of the tables that should be created and populated as a result of the EJBs are there.
The only two issues/warnings that I see are:
Aug 15, 2009 7:35:29 PM org.hibernate.impl.SessionFactoryObjectFactory addInstance
INFO: Not binding factory to JNDI, no JNDI name configured+
Aug 15, 2009 7:35:29 PM org.hibernate.util.NamingHelper getInitialContext+
INFO: JNDI InitialContext properties:{}+
Aug 15, 2009 7:35:32 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/seam-jee5-booking'
Aug 15, 2009 7:35:34 PM org.jboss.seam.servlet.SeamListener contextInitialized
INFO: Welcome to Seam 2.1.2
Aug 15, 2009 7:35:34 PM org.jboss.seam.util.Resources getRealFile
WARNING: Unable to determine real path from servlet context for "/WEB-INF/classes" path does not exist.
Aug 15, 2009 7:35:34 PM org.jboss.seam.util.Resources getRealFile
WARNING: Unable to determine real path from servlet context for "/WEB-INF/dev" path does not exist.
Stack: JDK 1.6_011; WebLogic 10.3.1 (11g); Seam 2.1.2; Windows XP; HSQLDB 1.8
Any help you can provide would be much appreciated.
The app's persistence.xml:
<?xml version="1.0" encoding="UTF-8"?>
<persistence xmlns="http://java.sun.com/xml/ns/persistence"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"
version="1.0">
<persistence-unit name="bookingDatabase">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<jta-data-source>seam-jee5-ds</jta-data-source>
<properties>
     
     <property name="hibernate.dialect" value="org.hibernate.dialect.HSQLDialect"/>
     <property name="hibernate.transaction.manager_lookup_class"
          value="org.hibernate.transaction.WeblogicTransactionManagerLookup"/>
</properties>
</persistence-unit>
</persistence>
Edited by: user447661 on Aug 17, 2009 9:41 AM
Edited by: user447661 on Aug 17, 2009 9:45 AM
Edited by: user447661 on Aug 17, 2009 9:47 AM

Nevermind, the issue was that my persistence.xml did not contain the following property:
<property name="hibernate.hbm2ddl.auto" value="create-drop"/>
Therefore, the tables were not being created upon deployment.
Still, I would expect to see entity beans listed in the WebLogic console.

Reminders are not created in Calendar, Outlook 2013

I am having the same issue many others are reporting. Under Calendar options I have it set to default to 30 minutes when creating a new meeting. However, when I create a new meeting request the default is zero. I can manually change it
to what ever value I want. There is a BUG in the software! I cannot believe this software is being released to the general public in a few weeks. Outlook 2013, Windows 7 Pro.
The reminders go off as they are supposed. Microsoft please fix this ASAP.

I am in agreement that this question is answered. Can't link due to low points, but the responses of Microsoft employees on the threads of this forum I have seen are clear in that Outlook 2013 is functioning as intended with regards to this feature.
If it were not, then I would agree it is a bug. It is at most a design choice that some disagree with, and luckily Microsoft is receptive to user opinions (such as on the uservoice website.) I can imagine some people may feel it would be best
to be consistent and honor the default event time, and the default reminder time calculated off of that even when added in month view. I also can see the perceived advantage to the current behavior in 2013.
It adds an all-day event by default when you add an event in Month view. It does this regardless of what your default event time and default event reminder is set.
A user can't even see all the times of the events in a day in month view. Because of this, perhaps the engineers assumed that most people adding events with specific times would like to know the context of when the other day's events are and would
switch to day, week, or workweek view prior to adding the time-specific event. Leaving all events set to the default time of 5:00 PM with a 15 minute reminder would give you a deluge of reminders at 4:45 PM arbitrarily.
The good thing is it only adds a couple of seconds to deselect all-day and choose a reminder time when adding an event from month view.

Private Area not Created in cFolders

Similar Messages

Maybe you are looking for