Private printing on canon IR2200-3300

I have a printer canon ir3300, the printer use private key for user
groups, i configured local printer in SAP, but when try printing not
required the key and not printing.I print with aplications non SAP
without problems.
thanks.

Hello,
Please look at link attached to this post.
[Security Functions for Output Devices|http://help.sap.com/saphelp_nw04/helpdata/en/90/78f08a030211d399b90000e83dd9fc/content.htm]
Regards,
Yogesh

Similar Messages

  • Canon lbp 3300 printer not working

    I have installed Canon LBP 3300 printer driver properly but not work since installed...

    Try resetting the printing system.
    Reset Printing System

  • My MacBook G4 and a networked Canon iR2200

    Hi
    I am trying to connect to a Canon iR2200 (the name on the faceplate) copier/printer/scanner at my work, and am determined to get the latter two functions to work on my Mac. It si becoming an obsession with me. Please help?
    The Canon is connected via an ethernet cable straight to the company's LAN. My PowerBook is too, and I am able to use file services on the Win 2003 file server on the network, print to the Lexmark printer that advertises via Bonjour, use the Exchange mail server, browse the Net, pretty much everything except use the printer/scanner features of this Canon.
    I can also connect to the printer via a browser, and there it presents as "Device Name: iR2200" and "Product Name: iR2200".
    - Under Device>Protocol, TCP/IP and SMB are marked as active, but NetWare as inactive:
    - - Under TCP on that page, "Use LPD:" is "On", as are "Use RAW:", "Use IPP:", and "Use HTTP:".
    - - Under SMB, "Use SMB:" is "On", "Server:" has the value of the name of the Win2003 file server, and "Workgroup:" has the value of the workgroup I connect to for file services. "Printer:" is empty and "LM Announce:" is "On".
    - Under Add. Func.>Custom Settings>Network Settings:
    - - Under "TCP/IP Settings", none of the check boxes for "Enable DHCP", "Enable RARP", and "Enable BOOTP" are checked.
    - - Under "SNMP Settings", the "Use SNMP" check box is ticked.
    - - Under "Enable Dedicated Port", the "Enable Dedicated Port" check box is ticked.
    I found no options for "PS" or "PostScript" on any of these pages.
    All my colleagues use Windows, and there, the Canon is presented under "Printers and Faxes" as "Canon iR2220" for some reason. Under properties, "Model:" is "Canon iR2220/iR3320 PCL5e". Which kind of suggests connecting to it as a PS printer from the PowerBook might be less than fruitful.
    I have downloaded the 1.60 driver, 1.80 driver, and the 2.10 PPDs. I first tried running System Preferences>Print & Fax and selecting the iR2200-3300 and iR 2220-3320 PPDs in various combinations with Printer Browser>Default Browser, Printer Browser>IP Printer and the following Printer Browser>More Printers:
    - AppleTalk
    - Canon IP (PS)
    - Advanced (holding down 'option' when selecting More Printers), and using the printer's ip address:
    - - Canon Mac PS Printer
    - - Internet Printing Protocol using HTTP
    - - Internet Printing Protocol using IPP
    - - LPD/LPR Host or Printer
    - - Windows Printer via SAMBA
    Most yielded a "The selected printer connection method is incorrect. Select the correct printer connection in Printer List, and then try to add the printer again", some actually printed pages, but only with the text "error courred = -9786", "SYSTEM %%[ Error: undefined; OffendingCommand]%%" (a PostScript error?) or spewing outr dozens of pages with small scribbles and some but most of them empty.
    So, for my sanity: Help?

    Thank you for your reply. However, I never did get this to work under Tiger.
    Now I have upgraded to Leopard, which went fairly smoothly, all things considered.
    While installing, I remembered your post, and selected all HP printer drivers to be installed.
    The adding-a-printer ritual has changed under 10.5.1, so this is how the first try went down:
    1. Opened a document in "TextEdit" and selected "File">"Print".
    2. Selected "Add a Printer" from the "Printer" drop-down menu.
    3. Under the "Default" tab, "Canon iR2220" appeared right away at the top of the list, which I found promising, but with "Kind" listed as "AppleTalk".
    4. I selected the Canon anyway and, since there was no "HP Laserjet 5 Series, Gimp-Print" to be had in the "Print Using" drop-down menu, I selected "Select a driver to use..." and then "HP Laserjet Series PCL 4/5, 1.3".
    5. I then clicked "Add", which closed the dialog box, and then clicked "Print" in the underlying dialog box, closing that one too.
    The Canon immediately sprang to life, and spewed out a single page, which reads:
    SYSTEM
    %%[Error: undefined; OffendingCommand: E&I6D&k12H&IO0 (and this goes on until the end of line)
    %%[Flushing: rest of job (to end-of-file) will be ignored ]%%
    So that didn't work.
    I then deleted this printer and tried again, this time following your suggestions more closely:
    1. Opened a document in "TextEdit" and selected "File">"Print".
    2. Selected "Add a Printer" from the "Printer" drop-down menu.
    3. Clicked on the "IP" tab, and selected "HP Jetdirect - Socket" under "Protocol".
    4. There, I entered the printer's IP address under "Address:".
    5. There was still no "HP Laserjet 5 Series, Gimp-Print" to be had in the "Print Using" drop-down menu, I selected "Select a driver to use..." and then "HP Laserjet Series PCL 4/5, 1.3".
    6. I then clicked "Add", which closed the dialog box, and then clicked "Print" in the underlying dialog box, closing that one too.
    Again, the Canon immediately sprang to life, and this time it spewed out...
    ...my document! Intact! Yay!!
    Thank you for solving my problem. I really appreciate it.
    Next on the list: Get the scanner to work... Any ideas?

  • Won't print to canon PIXMA ix6820

    how can i print to canon PIXMA ix6820 with PSE12?

    docforr wrote:
    Thanks for responding to my plea.
    I get a message that "the saved printer information is not compatible
    with this version of photoshop elements or the saved printer is no
    longer available.
    The printer and Adobe elements were brand new. The printer works with
    other programs. It never worked.
    PDF
    Have you ruled out an issue with the driver for the printer? It is possible that the material on the installation disk was developed prior to PSEv.12. I understand that everything is new, but who knows what the date of production is. You can check on Canon's web site for driver update.

  • Can't print to Canon LBP7200Cdn after Lion upgrade

    Since upgrading to Lion, I can't register (and therefore can't use) my office printer, a Canon LBP7200Cdn.
    I tried for weeks to get it to work with the interim driver Canon released with Lion, then gave up and waited for the full driver. Then that didn't work either.
    Installation of the driver appears to work fine, but once the printer is registered, printing from any program gives me the error message "/Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl failed".
    The problem is the same whether connecting via USB or IP.
    I had the same problem when I updated to Snow Leopard 10.6.7, but installing Canon's new driver fixed it. Now nothing works and I haven't been able to print since the summer. No other Mac users are having this problem (but I'm the only one running Lion). Would welcome help from anyone.
    Here's the System Profiler info on the printer:
    10.0.0.6:
      Status:          Idle
      Print Server:          Local
      Driver Version:          3.40
      Default:          Yes
      Shared:          No
      URI:          cnbma://localhost:59687
      PPD:          Canon LBP7200C CAPT (UK)
      PPD File Version:          3.40
      PostScript Version:          (3010.000) 550
    (3010.000) 651
      CUPS Version:          1.5.0 (cups-297.2)
      Fax support:          No
      Scanning support:          No
      Printer Commands:          none
      CUPS filters:
    capdftopdl:
      Path:          /Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl
      Printer utility:          /Library/Printers/Canon/CUPSCAPT/StatusMonitor/StatusMonitor.app
      Printer utility version:          3.40
      PDEs:
    FinishingPDE.plugin:
      Sandbox compliant:          No

    I'm having the same issue.  I've re-installed the Canon software after deleting all of the folders & files that they talk about in the user manual.
    Same issue.  /Library/Printers/Canon/CUPSCMFP/Bins/capdftopdl failed
    I've sent a note to Canon and here's their first reply.
    Thank you for contacting Canon technical support.  We value you as a Canon customer and appreciate the opportunity to assist you.  We regret that you are experiencing difficulty printing to your imageCLASS MF3010.
    We will gladly provide assistance.  Unfortunately, it is not clear what is causing this.  We will gladly help troubleshoot to isolate the cause:
    1.  Is the printer connected directly to the computer or through a print server, USB hub or other external device?
    Directly to the computer with USB
    2.  Can you make copies without using your computer?  This will verify if the printer is working.
    Don't know waiting for my folks to try this.
    3.  Are you installing drivers from the CD disk or downloading them from the Canon website here:
    Downloaded from the website.  No Mac sofware on the CD supplied with the printer.
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass _series/imageclass_mf3010#DriversAndSoftware
    With this information, we will be able to better assist you.
    We look forward to your reply with the information we have requested regarding your imageCLASS MF3010.
    Thank you for choosing Canon.
    Sincerely,
    David
    Technical Support Representative
    Special Note: Certain issues are very difficult to resolve via email.  If you would prefer to speak to a technician for additional assistance, you may call our special toll-free number for email customers with unresolved issues by dialing 1-866-261-9362, Monday - Friday 8:00 a.m. to 8:00 p.m. ET (excluding holidays).  If you prefer to continue to communicate via email, reply to this message and we will respond as quickly as possible.

  • My Mac book pro won't print to canon IR-ADV C5035 wirelessly but my I pad will

    My Mac book pro won't print to canon IR-ADV C5035 wirelessly but my I pad will

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
    Please describe in detail all you have attempted to do in order to resolve the issue.  Contacted Canon's tech support for instance?

  • Unable to print to Canon ir2022i after 10.9.1 mavericks update.

    Hi, we are unable to print to Canon ir2022i after 10.9.1 mavericks update. Can anybody help to find a driver update which works with mavericks.

    http://www.usa.canon.com/cusa/support/office/b_w_imagerunner_copiers/imagerunner _2016_2016i_2018_2018i_2020_2020i_2022_2022i_2025i_2030i/imagerunner_2022#Driver sAndSoftware

  • CS5, Mavericks OS, Pshop crashes on print settings, Canon iP4820

    New Mac, on Mavericks OS: Photoshop CS5 will not print to Canon iP4820, quits every time I click print settings. Will print low quality.

    Contact Canon to get updates to fix bugs in MacOS 10.9.
    And make sure you have the OS and Photoshop updates installed.

  • Frustrated trying to print from Canon Pixma 9500

    Does anyone have any tips for printing from Canon Pixma 9500?
    I profiled the screen, printer and paper using colormunki.
    Trying to print from photoshop. Frustrated that the printer interface isn't as described in many online forums (for example, it seems impossible to turn off colour management).
    Getting strange blue borders around everything when using the paper profiles via colormunki.
    Does anyone have any good tips?
    .......help.....!

    I used colormunki to calibrate my screen, printer and to make a paper profile.
    Read one site that suggested the strange blue borders are related to V4 vs V2 paper profiles...whatever that means. Apparently it is an issue printing from photoshop.

  • Baltic printing on Canon printer (Canon ir2020)

    Hi All,
    We have canon printer named Canon ir2020. We tried to print picking list (ZEK4) which contains Baltic (Lithuanian character) character. But Canon printer not able to print it properly.
    But HP printer with device type HPUTF8 is able to print the Baltic character properly.
    We need to know, Can we print baltic character on canon printer (i.e. Canon ir2020) or any other canon printer and if yes what should be the device type?
    Request you to help.
    Thanks
    Deepak

    Go to > Canon U.S.A / PIXMA MG2120, select the OS X that you are running and try that driver.

  • Duplex Printing on Canon IX6560 Problem

    i've got problem with duplex printing on canon ix6560, i've installed the latest driver from canon website (11.7.1.0) for OSX Maverick (10.9.5). what is the solution ?

    First, check the printer specification to make sure it's capable of duplex printing. If it is, there should be a setting in the Finishing tab of the print dialog. Reportedly, Canon tech support sometimes advises customers to uninstall the existing software before installing an update.

  • Does the printer models "Canon  IR 2016 URF ll LT" support SAP printing?

    HI All,
    Does the printer models "Canon  IR 2016 URF ll LT" support SAP printing?
    What is the device type we need select SPAD configuration..
    I have checked all the possible device type ,there is no physical output has received .
    but in SP01 status.."completed". Which  device type should i select SAP..
    Reagrd
    Jagadish

    Dear Jagadish,
    Did you try with CAN22 : CANON iR 2200.
    Regards,
    Naveen.

  • I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

    I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

    Try what Terence Devlin posted in this topic:
    Terence Devlin
    Apr 14, 2015 11:21 AM
    Re: Is Iphoto gone ? i want it back!
    in response to Johannes666
    Recommended
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Have installed Mountian Lion, now having trouble with my printer.. Printer is Canon LBP6000.. Does anyone have a driver I can use??

    Have installed Mountian Lion, now having trouble with my printer.. Printer is Canon LBP6000.. Does anyone have a driver I can use??

    It looks like this page from Canon's website will take care of you (provide drivers, etc.):
    http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware

  • Printing to Canon iPF series

    Historically I've always printed from Photoshop via the 16-bit Canon plugin. This works great. I just thought I'd give native Ap3 printing a try for once. After I go through the (awkward, buggy) layout feature in Aperture, it appears to hand off to the OS X print dialog.
    There, it appears to have correctly picked up my color profile setting (custom) and my paper type and size (letter cut-sheet). After setting some additional options (media type, resolution), when I hit Print, the Canon monitor application starts and the combination Aperture+OSX Print Dialog locks up. It just sits there with no options in the dropdown. The printer actually lights up as if it's ready to print, but nothing goes over the wire.
    I can print okay from other applications using the built-in print driver, so I think it is something with Aperture.
    Is anyone else having this problem?

    Hello Jeff,
    The problem you are having with the Canon PS and UFR2 driver is caused by the Paper Size > US Letter not being listed as a supported paper size. Instead, these two drivers have Letter, not US Letter. Therefore, when you do have the Page Setup > Format set to Any Printer and the Paper Size set to US Letter, the finishing options are not available.
    You will notice an interesting phenomena via the Page Setup pane. Open an application like TextEdit, go to Page Setup and have the Format set to Any Printer and the Paper Size set to US Letter. Then change the Format menu to the Canon driver and watch the Paper Size automatically change to Letter.
    The solution to this is to delete the CanonPS and UFR2 driver and use the new Canon 'CUPS' PS v2.11 driver. This driver has US Letter as a supported paper size, so you can leave 'Format for' at 'Any Printer'. And the driver supports both the 5075 and C5185, so you models are covered. Note that you will still have to use the Fiery driver for the other C5185.
    Re the mailbox, the format setting won't affect this function. Your comment about PCL not supporting it is interesting. The PCL driver on Windoze definitely works with mailbox so you must have some other gremlins if that is not available.
    Regards,
    PaHu

Maybe you are looking for