PRKC-1023 : Invalid IP address format & PRCR-1001 Error in root.sh

Hello All,
At prompting to execute root.sh, I get the following errors. I am installating 11.2.0.1 Grid Software. I am not sure why it is taking the virtual IP name.
The details give are on Specify Cluster configuration window is :-
Scan name : rs1pre91cl
Both nodes edited/added as below
hostname Virtual IP name
rs1pre91dvdbaa01.pre.ccosvc.com rs1pre91dvdbaa01vip.pre.ccosvc.com
rs1pre91dvdbaa02.pre.ccosvc.com rs1pre91dvdbaa02vip.pre.ccosvc.com
Identify network interfaces option used to show eth0 for public (172.) and eth1 for private (192)
SSH connectivity already established, but tested using this screen.
Error in root.sh
PRKC-1023 : Invalid IP address format: rs1pre91dvdba01vip
add nodeapps -n rs1pre91dvdba01 -A rs1pre91dvdba01vip/255.255.252.0/eth0 on node=rs1pre91dvdba01 ... failed
PRCR-1001 : Resource ora.net1.network does not exist
add scan=rs1pre91cl ... failed
When running pre-checks installation -- it shows me successfull.
./runcluvfy.sh stage -pre crsinst -n rs1pre91dvdba01,rs1pre91dvdba02 -fixup -verbose > ~oracle/run_pre_install_cluvfy.out.1
Has someone experienced this error and what are the steps to fixup
Thanks

We have also experienced similar issue with 11.2.0.2 on HPUX:
srvctl add nodeapps -n host2 -A "host2-vip/255.255.252.0/lan0|lan3"
PRKC-1023 : Invalid IP address format: host2-vip
Replacing host2-vip with IP address works fine.
More surprisingly, on one node, it accepts same command with vip format, whereas on others it is expecting IP address in command. ( although vip names are resolvable to its IP address from all nodes--checked using nslookup)

Similar Messages

PRCT-1302 : The "OCR," has an invalid IP address format

Dear RAC experts,
I am setting up RAC nodes and during installation it fails with error PRCT-1302.
PRCT-01302: The "{0}" has an invalid IP address format
Cause: The format of the subnet number and/or the subnet mask is an invalid IP address format.
Action: Make sure that both the subnet number and the subnet mask have a valid IP address format.
It seems like everything OK with subnet.
public network
eth0
         Mask:255.255.255.192 / 26
private interconnect
eth1   Mask:255.255.255.240 / 28
private interconnect
eth2
        Mask:255.255.255.240 / 28
Please advice.
Thanks in advance.
RAC 2node
Linux
VMware
IBM

Hey ioannis,
So I would recommend starting from scratch on this one and seeing if we can get things to work. I would recommend following these steps:
Make sure that you have access to port 80, which is what LabVIEW and the Web Server uses for communication. This might mean turning off virus checkers or firewalls, as Altenbach suggested.
Restart your computer. This is to make sure that there isn't anything already accessing this port that is conflicting.
Start LabVIEW once the computer is back up.
Open the VI that you would like to publish. I might recommend using an Example just to test, but you could use your program.
Select Tools » Web Publishing Tool (WPT).
On the bottom of the WPT window, press the Start Web Server button.
Configure your VI as you would like. You can probably just use the defaults for now.
Select Save to Disk and replace the file if necessary.
Hightlight the address that comes up in the Document URL window and press Ctrl+C to copy it.
Open Internet Explorer and past the URL into the address bar on the development computer.
These steps should be all that is necessary to use the WPT, so please follow them and let me know if they help or not.
Thanks!
Andy F.
Message Edited by Andy F. on 03-17-2006 12:41 PM
National Instruments

Invalid MAC Address Format Error

I have a WRT54GR with a 54USB Wireless Adaptor...and I am trying to put my PC MAC Address in the Allow Table so that this is the only MAC Address that can access my network...it is recognising my 54USB Adaptor MAC Address in the Table, so I select this, and add it to the table to allow access, and it comes up with Invalid MAC Address Format....
Anybody know why this is happening...I have tried adding it automatically and typing it in manually still the same. I use ':' between the numbers/characters not '-'.
Any help greatly appreciated....
Thanks
Smartie27.

Try it in the form xxxxxxxxxxxx and see if that works, or maybe just xx xx xx xx xx xx

#550 5.1.3 STOREDRV.Submit; invalid recipient address #SMTP# Exchange 2010

We have one user who is getting undeliverable bounces for some emails they send. These bounces look like
Delivery has failed to these recipients or groups:
The format of the e-mail address isn't correct. A correct address looks like this:
[email protected] Please check the recipient's e-mail address and try to resend the message.
With the header:
#550 5.1.3 STOREDRV.Submit; invalid recipient address #SMTP#
Original message headers:
Received: from xxxxxxxx ([2002:80e8:f350::80e8:f350]) by
xxxxxxx ([::1]) with mapi id 14.02.0298.004; Wed, 5 Sep
2012 11:30:27 +0100
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: xxxxxx
To: xxxxx
Subject: FW:
Thread-Topic: Economics
Thread-Index: Ac2GxPSoAC0JPealQhq9mnAnQxf7SQEiPj2gAADJepA=
Date: Wed, 5 Sep 2012 11:30:27 +0100
Message-ID: <7D0ACDCF411B26429DC7355744AEFF9A02D8AC@xxxxxx>
Accept-Language: en-GB, en-US
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <7D0ACDCF411B26429DC7355744AEFF9A02D8AC@xxxxxxx>
MIME-Version: 1.0
X-Originating-IP: [xxx.xxx.xxx.xx]
So far most of the bounces for this user appear to be to the same domain which takes the format xxx.ac.uk our domain is yyy.xxx.ac.uk
We are currently using Exchange 2010 having migrated in the last month from 2003. We are also using an Edge server.
Thanks for any help

On Wed, 5 Sep 2012 11:52:43 +0000, Rah33 wrote:
>I have noticed that so far the addresses that have bounced back are Mail Contacts that have been created on the Exchange server. If you go into the properties for one of these contacts you get a message saying that some properties are invalid and will
be replaced with defaults. It also prompts to update the contact.
If you update the contact does it eliminate the problem?
What properties are invalid? It isn't uncommon to find "alias"
properties that contain spaces or other characters that earlier
versions (i.e. pre-Exchange 2007) allowed.
Rich Matheisen
MCSE+I, Exchange MVP
--- Rich Matheisen MCSE+I, Exchange MVP

What are valid and invalid email address characters

What are valid and invalid email address characters in Exchange 2010, for example can you have Conan.O'[email protected] is there a document that shows the valid and invalid sysmbols?

Hi
The format of email addresses is
local-part@domain where the local-part may be up to 64 characters long and the
domain name may have a
maximum of 253 characters - but the maximum 256 characters length of a forward or reverse path restricts the entire email address to be no more than 254 characters.[1]
The formal definitions are in RFC 5322 (sections 3.2.3
and 3.4.1) and RFC 5321 - with a more readable form given in
the informational RFC 3696[2]
and the associated errata.
Local part
The local-part of the email address may use any of these
ASCII characters
RFC 5322 Section
3.2.3:
Uppercase and lowercase English letters (a–z, A–Z) (ASCII: 65-90, 97-122)
Digits
0 to
9 (ASCII: 48-57)
Characters
!#$%&'*+-/=?^_`{|}~ (ASCII: 33, 35-39, 42, 43, 45, 47, 61, 63, 94-96, 123-126)
Character
. (dot, period, full stop) (ASCII: 46) provided that it is not the first or last character, and
provided also that it does not appear two or more times consecutively (e.g. [email protected] is not allowed.).
Special characters are allowed with restrictions. They are:
o
Space and
"(),:;<>@[\] (ASCII: 32, 34, 40, 41, 44, 58, 59, 60, 62, 64, 91-93)
The restrictions for special characters are that they must only be used when contained between quotation marks, and that 3 of them (The
space, backslash \ and
quotation mark " (ASCII: 32, 92, 34)) must also be preceded by a backslash
\ (e.g.
A quoted string may exist as a dot separated entity within the local-part, or it may exist when the outermost quotes are the outermost characters of the local-part
(e.g. abc."defghi"[email protected] or
"abcdefghixyz"@example.com are allowed. Conversely,
abc"defghi"[email protected] is not; neither is
abc\"def\"[email protected]). Quoted strings and characters however, are not commonly used.
RFC 5321 also
warns that "a host that expects to receive mail SHOULD avoid defining mailboxes where the Local-part requires (or uses) the Quoted-string form".
The local-part "postmaster" is treated specially - it is case-insensitive, and should be forwarded to the server's administrator. Technically all other local-parts
are case sensitive, therefore [email protected] and [email protected] specify different mailboxes. However most organizations treat uppercase and lowercase letters as equivalent, and also do not allow use of the technically valid characters
(space, ? and ^). Organizations are free to restrict the forms of their own email addresses as desired, e.g.,
Windows Live Hotmail,
for example, only allows creation of email addresses using alphanumerics, dot (.), underscore (_)
and hyphen (-).[3]
Systems that send mail must be capable of handling outgoing mail for all valid addresses. Contrary to the relevant standards, some defective systems treat certain
legitimate addresses as invalid and fail to handle mail to these addresses. Hotmail, for example, refuses to send mail to any address containing any of the following standards-permissible characters:
!#$%*/?^`{|}~
Domain part
The domain name part of an email address has to conform to strict guidelines: it must match the requirements for a
hostname,
consisting of letters, digits, hyphens and dots. In addition, the domain part may be an
IP address
literal, surrounded by square braces, such as jsmith@[192.168.2.1], although this is rarely seen except
in email spam.
Examples
Valid email addresses
<tt>[email protected]</tt>
<tt>[email protected]</tt>
<tt>[email protected]</tt>
<tt>much."more\ unusual"@example.com</tt>
<tt>very.unusual."@"[email protected]</tt>
<tt>very."(),:;<>[]".VERY."very@\\\ \"very"[email protected]</tt>
Invalid email addresses
<tt>Abc.example.com</tt> (an @ character must separate the local and domain parts)
<tt>[email protected]</tt> (character dot(.) is last in local part)
<tt>[email protected]</tt> (character dot(.) is double)
<tt>A@b@[email protected]</tt> (only one @ is allowed outside quotation marks)
<tt>a"b(c)d,e:f;g<h>i[j\k][email protected]</tt> (none of the special characters in this local part
is allowed outside quotation marks)
<tt>just"not"[email protected]</tt> (quoted strings must be dot separated, or the only element making
up the local-part)
<tt>this is"not\[email protected]</tt> (spaces, quotes, and backslashes may only exist when within
quoted strings and preceded by a slash)
<tt>this\ still\"not\\[email protected]</tt> (even if escaped (preceded by a backslash), spaces, quotes,
and backslashes must still be contained by quotes)
Terence Yu
TechNet Community Support

My apple id is not working on icloud because it is not in email address format. how can i change my apple id to email format so icloud can work?

Hello - I just purchased an iPhone 4s and would like to use iCloud but my apple id is not in email address format so when i try to sign into iCloud it won't let me use my apple id. i tried to change my apple id through my account settings but could not find a way to do that. i found ways to change everything else in my settings but when i pushed on the edit button to change my apple id the page didn't change. Not sure how i can get to use iCloud? Please help.

You change the name of your ID at https://appleid.apple.com. See http://support.apple.com/kb/HE40.

Invalid recipient address - while sending mails

Hi Experts,
I am trying to send a PDF form as a mail attachment from my SAP R/3 server (version ECC 6.0)
Using the following code:
PARAMETER : p_addr TYPE adr6-smtp_addr DEFAULT 'ashish.shah xyz.com'.
*"Look up the generated function for the Book Flight Form
DATA : l_name TYPE funcname.
TRY.
 CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
 EXPORTING
 i_name = 'Z_CUST_BOOK_FLIGHT_FORM'
 IMPORTING
 e_funcname = l_name
 EXCEPTIONS
 OTHERS = 0.
CATCH cx_fp_api_repository. "#EC NO_HANDLER
CATCH cx_fp_api_usage. "#EC NO_HANDLER
CATCH cx_fp_api_internal. "#EC NO_HANDLER
ENDTRY.
DATA : l_outputparams TYPE sfpoutputparams.
*"Start form processing
l_outputparams-getpdf = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
 ie_outputparams = l_outputparams
EXCEPTIONS
 cancel = 1
 usage_error = 2
 system_error = 3
 internal_error = 4
 OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*" Call the generated function for the Book Flight Form
DATA : fp_docparams TYPE sfpdocparams,
 reservedonly TYPE bapisbodat-reserved,
 booking_data TYPE bapisbonew,
 fp_result TYPE fpformoutput.
fp_docparams-fillable = 'X'.
fp_docparams-langu = sy-langu.
CALL FUNCTION l_name
EXPORTING
 /1bcdwb/docparams = fp_docparams
 reserved = reservedonly
 booking_data = booking_data
IMPORTING
 /1bcdwb/formoutput = fp_result
EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA : pdf TYPE fpformoutput-pdf.
pdf = fp_result-pdf.
*"End the form Processing session
CALL FUNCTION 'FP_JOB_CLOSE'
EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*"Create and send the email
DATA : bcs_exception TYPE REF TO cx_bcs.
TRY.
*"Add text to the email body
 DATA : l_subject TYPE so_obj_des,
 l_mailtext TYPE bcsy_text,
 l_mailtext_row TYPE soli.
 l_subject = 'Trip Creation Form'.
 CONCATENATE 'Please fill out the form and return it to:'
 'ashish.shah xyz.com'
 INTO l_mailtext_row.
 APPEND l_mailtext_row TO l_mailtext.
*"Create the email document
 DATA : document TYPE REF TO cl_document_bcs,
 num_rows TYPE i,
 textlength TYPE so_obj_len.
 DESCRIBE TABLE l_mailtext LINES num_rows.
 num_rows = num_rows * 255.
 MOVE num_rows TO textlength.
 document = cl_document_bcs=>create_document(
 i_type = 'RAW'
 i_text = l_mailtext
 i_length = textlength
 i_subject = l_subject ).
*"Add ataachment
 DATA : attdoctype TYPE soodk-objtp,
 atttitle TYPE sood-objdes,
 attsize TYPE sood-objlen,
 pdftab TYPE solix_tab.
 attdoctype = 'pdf'.
 atttitle = 'CreateFlight'.
 attsize = XSTRLEN( pdf ).
 pdftab = cl_document_bcs=>xstring_to_solix(
 ip_xstring = pdf ).
 document->add_attachment( EXPORTING i_attachment_type = attdoctype
 i_attachment_subject = atttitle
 i_attachment_size = attsize
 i_attachment_language = sy-langu
 i_att_content_hex = pdftab ).
*"Create persistent send request
 DATA : send_request TYPE REF TO cl_bcs.
 send_request = cl_bcs=>create_persistent( ).
*"Add document to send request
 send_request->set_document( document ).
*"Get sender object
 DATA : sender TYPE REF TO cl_sapuser_bcs.
 sender = cl_sapuser_bcs=>create( 'A146861' ) .
*"Add sender
 CALL METHOD send_request->set_sender
 EXPORTING
 i_sender = sender.
*"Create recipient
 DATA : recipient TYPE REF TO if_recipient_bcs.
 recipient = cl_cam_address_bcs=>create_internet_address(
 p_addr ).
*"Add recipient with its respective attributes to send request
 send_request->add_recipient( EXPORTING i_recipient = recipient ).
*"Set send immediately
 send_request->set_send_immediately( 'X' ).
*"Send document
 send_request->send( ).
 COMMIT WORK.
 WRITE: 'Email coantaining the Interactive form was sent'.
CATCH cx_bcs INTO bcs_exception.
 DATA : ex_msg TYPE string.
 ex_msg = bcs_exception->get_text( ).
 WRITE: 'Caught exception.', ex_msg.
ENDTRY.
I get a Mail sending failure notification in my SAP Businesss work place, with the title "Cannot be sent: Trip Creation Form " With status as :
Status for Recipient ashish.shah xyz.com:
 No delivery to ashish.shah xyz.com, invalid recipient address
I have entered the correct Email IDs, but still getting this error.
Can you guys help?
Regards,
Ashish Shah

Hi Ravi,
I have @ in all the email IDs in my code , but i have removed it from this post.
It seems SDN has implemented some new check - where in it checks for Email IDs in the post and gives error when any email ID is encountered.
Can you now spot anything else , which could be the cause for the status as Invalid receipient?
Regards,
Ashish Shah

I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?

I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?

In this case you won't be able to do that?

Ip address format

Hi Everyone,
One of methods in my COM object is
public void setIP(Variant ip)
with Variant data type supposes to be 4 byte int. I don't know how to convert a string like "192.167.1.108" to an int so I can pass in the above function. Would anybody please help me out!
Thanks in advance
Hung

In java, there is no such thing as an unsigned int. How to put this data into an int is going to depend on how he reads it out. Can you find this out? Does he strictly read each 8 bits as an unsigned byte? If this is the case, the previous examples (mine included) will have problems because signed data types use 2's complement for negative numbers (see http://forum.java.sun.com/thread.jsp?forum=54&thread=143155 ). I've modified the method for this case:
 static int ipToInt(String ip)
 StringTokenizer st = new StringTokenizer(ip, ".");
 int numParts = st.countTokens();
 if (numParts == 0)
 throw new IllegalArgumentException("Invalid IP address: empty argument");
 if (numParts > 4)
 throw new IllegalArgumentException("Invalid IP address: too many tokens");
 long ipLong = 0;
 for (int i = 1; i < numParts; i++)
 /* For all but the last token in an IP address, the nth token corresponds to the
 nth byte from the left (or 4 - n from the right) */
 String token = st.nextToken();
 int tokenVal = Integer.parseInt(token);
 // Above will throw NumberFormatException if the token is not an integer
 int processedVal = tokenVal << (8 * (4 - i));
 // Moves the byte to the correct portion of the int
 ipLong = ipLong + processedVal;
 /* The right most token of an IP address is always added as its given value
 (never shifted) */
 String token = st.nextToken();
 int tokenVal = Integer.parseInt(token);
 // Above will throw NumberFormatException if the token is not an integer
 ipLong = ipLong + tokenVal;
 if (ipLong > Integer.MAX_VALUE)
 /* This will ensure the proper bits are set using 2's complement when
 converting back to an int */
 ipLong = Integer.MIN_VALUE + (ipLong - Integer.MAX_VALUE - 1);
 int ipInt = new Long(ipLong).intValue();
 return ipInt;
 }If you do the following, you can see each 8 bit section matches:
 String ipString = "192.167.1.108";
 int ipInt = ipToInt(ipString);
 System.out.println("IP: \t" + ipString);
 System.out.println("ipInt:\t" + ipInt);
 System.out.println(" \t" + Integer.toBinaryString(ipInt)); The results are:
IP: 192.167.1.108
ipInt: -1062796948
 11000000101001110000000101101100Note the value of this bitwise representation is negative.

I changed my Apple ID that using an invalid email address to a new one and I am trying to update iCloud account on iPhone5 with iOS 7.1.2, and I am not able to delete iCloud account without the old password.

I changed my Apple ID that using an invalid email address and I am trying to update iCloud account with my new Apple ID on iPhone 5 with iOS 7.1.2. I am not able to delete iCloud account without the old password. Is there a way to update the Apple ID of my iCloud account?

Many people are having probalems with this right now. The only solution I've seen that seems to consistently work is the one posted by Brackers28 here: https://discussions.apple.com/message/23020591#23020591. This only works if you still have access to your old email account. If you don't, you'll have to have Apple help you reset the password for your old account so you can turn off Find My iPhone and sign into your account with your correct ID.

Exchange 2007 in iCal not working. - Invalid Email address

I did the exchange setup - Email works.
Addess book - Contacts are there but the Global Address book does not produce anything.
iCal - all the setting are correct but it won't connect to the calendar. The error:
Invalid Email address. It is the correct address and works in the other areas.
Any ideas????
Seems like other have issue as well
Thanks
Paul
Our Exchange service is provided by Intermedia.
Are there detailed instructions for the Exchange settings

I'm having the same problem here. Gerr.

Airport Extreme invalid IP address, no DNS server

Hardware: Motorola SURFboard SB6141, Airport Extreme A1408
I recently set up a new internet service with Cox, plugged in the SB6141 and A1408 and everything set up perfectly, solid green light and wireless was flawless. However, electricity to my house had to be reset, and when the power came back on the green light on the Airport Extreme started to flashing amber. I did several hard/factory resets of the Airport Extreme as well as unplugging the modem and leaving everything unplugged for several minutes and then plugging everything back in. No matter what combination of things I try to do, the Airport Utility always tells me the same 2 errors: invalid IP address and no DNS server. Why was the Airport Extreme able to automatically set up the first time, but not now? Any ideas of what I can do? Thanks!

I have also looked through other threads about this same problem, but none of the solutions (e.g. posts by Tesserax, followed to the letter) so far have worked.
Here are other things I have tried:
1. Called Cox to have them reset my modem, internet works through Ethernet directly from the modem
2. Downgraded AEBS firmware to 7.6.1 (oddly enough, now I cannot for the life of me update the firmware back to 7.6.4, always says cannot connect to update server)
I ran through the various solutions from this thread: "No DNS servers" and "Internet connection" problems with Comcast?
Still getting that pesky blinking amber light.

ITunes 6.0 and invalid billing address

I recently upgraded to iTunes 6.0. Now every time I try and purchase music iTunes tells me I have an invalid billing address. This is the same address I have been at for 5 years, and using for iTunes for 3. I tired the email support but just got the generic email back. iPod customer support verifies that my address is fine but they have no involvement with iTunes customer support. Does anyone have a way to contact a live person in iTunes customer support? Anyone else have this issue?

OK, Now I'm downloading. I changed the county to that which my city center is in (Yamhill), despite that my HOUSE is in a different county (Washington).
Thank you for the tips.
Dell Latitude Windows XP Pro SP2

OS won't boot--invalid memory address message

10.4.9 running on a G4 867 Dual. System won't boot from internal disk or from Tiger installation CD. I get an error message for an invalid memory address followed by some hex code. The message says I can type "boot-up" but all I get is the little folder icon, then the flashing question mark. If I type "shut-down" this works.
I've detached all external accessories, disks, etc. I reset the memory chips. Unplugged two of my 4 internal disks. Doesn't help.
What I was doing before this--running iDefrag on one of my internal disks (not the startup disk), stopped & quit the app partway. Also running SuperDuper backing up yet a third internal disk to my external firewire storage--also stopped & quit partway.
I inserted my 10.4 installation disk to install a system on an external firewire disk (none of the above, I have a lot of drives) but could not start up from the CD. Started to get the error above. Can't eject CD, either. Bluetooth seems fine as my Apple bluetooth keyboard works.
Another tidbit--my combo drive may be having problems seeing discs. Some will mount on my iBook but not on the G4 Dual.
Any ideas?
G4 Dual 867 Mac OS X (10.4.9) 2 GB RAM

hey if you actually restrt your mac now where will your mac boot up to does it reach the firmware screen if it does just try typing in
reset-nvram
and then
reset-all
the mac should restart

How to make Address Book obey Preferences? I run MacBook Pro 4.1 laptop, Mac OS X 10.6.8 Address Book 5.0.3 (883) Preferences set at ... General First name following Last name Sort for Last name Address Format Canada Font size Large Phone format set a

How to make Address Book obey Preferences?
I run MacBook Pro 4.1 laptop, Mac OS X 10.6.8
Address Book 5.0.3 (883)
Preferences set at ...
General
First name following Last name
Sort for Last name
Address Format Canada
Font size Large
Phone format set at
+1.123.456.7890
When application quits - it's all forgotten and it self-resets to
unwanted configuration.

Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

PRKC-1023 : Invalid IP address format & PRCR-1001 Error in root.sh

Similar Messages

Maybe you are looking for