PRO-1 failed initial setup

I purchased a PRO-1 this evening and started installing the printer.
I was very careful to follow each step, reading it twice and then performing it. I installed the ink tanks. Carefully removed the print head from the packaging, inserted it in the print head holder. The Joint Lever clicked closed without any fuss. Reassembled the Head Cover and closed the Top Cover.
The power light began flashing for a few moments, then the Yellow alarm light started flashing with the power light. I counted 10 flashes.
The instructions say to reseat the print head if the yellow light flashes. Nothing I do can get the print head back into position to reseat it. After an hour of frustration I power cycled it. This has obviously interupted the initial setup procedure and I'm not sure what to do at this point.
Any advice or help would be appreciated.

Canon's support solution is for me to return the printer to the store or take it to a repair shop 20 miles away.
I think I know what I'm going to do.
Very disappointed.

Similar Messages

  • Location of the picture during initial setup

    I recently bought a Mac Pro.During the initial setup i was asked for picture.I clicked the same using the inbuilt web cam.
    This pic is displayed in my ichat and apple mail.But i am unable to search for this pic.
    Can anyone please tell me the location where it is stored ???

    Hi,
    I have responded oin the other thread  (I clicked you name on the left to see your Posts).
    I have somewhat changed my mind on the Folder the Address Book "Sees" as it seems it keep  record of the lst folder you went (I must have used the Recent Pics folder last time I changed the Pic)
    I don't think I am going to have the answer but my posting there will raise it to the top of the pile (briefly) and have it on the front page there for little while longer - which may help when you post back some more info there.
    8:10 PM      Friday; August 5, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Final Cut Pro 7 initial setup settings (DSLR user) new user

    Hello Guys,
    I just bought Final Cut Pro 7 and installed it. Can anyone give me some tips on how to do an initial setup or how I should set up my Final Cut Pro. Scratch disk, ext.
    How can I optimize it for HD DSLR? I mainly shoot with Canon 5d and Canon7d DSLR with 24frames per second and I will importing and editing and capturing footage from these DSLR, how should I set the preferences and settings be on my final cut pro 7 best optimal use for these cameras.
    I also heard that I should be converting all the videos to pro res 422 before editing, so It can render faster or something like that. Can some please explain that pro res conversion part.
    I am also a new user, I have little knowledge on fcp, so please bare with my newbie questions. Thanks so much.

    Thanks Nick for the links, I'm actually a video guy, been doing corporate av video for concerts, professional sports, broadway theatre, and corporate evens, and also do my own videography on the side. But I am more of a shooter, I have used FCP in the past awhile back but I had a partner that did all of the editing. But I have used it FCP in the past, can't remember much though.
    Does anyone know which apple pro res format is best for DSLR editing. I see there is 422, 422(proxy), 422(HQ), 422(LT) and 4444.

  • During initial setup of mac pro, used pc to mac transfer, after transfer mac requires new password to enter account but will not accpt password

    During the initial setup of mac book pro, I did the pc to mac transfer. After transfer was complete, mac had two user accounts aspen pc machine? and dell. Upon trying to access either, the mac says I have to enter new password to enter. It will not accept new password. What do I do?

    Well....I bit the bullet and called Apple tech support this morning and agreed to pay my $49 for the tech support. I ended up talking to a Boot Camp specialist. In the end his position was that "they didn't support Windows" and my particular problem was a "Windows problem". I countered with the fact that they advertise that one of their selling points was that Windows could run on an Intel Mac and that I ought to at least be able to install Windows. They said that most people were able to install Windows with no problems. I agreed, but told them that, after searching the Internet, I had read numerous posts from folks that had the same problem and that Apple really should address it. They were very polite and even agreed not to charge me the $49, but their final position was that it was a "Windows problem."
    I guess that at this point I'll try to return the Windows disk to Amazon and see if they'll give me a replacement.

  • New MacBook Pro, unable to get past the select your country screen during initial setup.

    I purchased a new MacBook Pro last night and am unable to get past the initial setup screen where you select your country.  The mouse will move around, but won't actually allow me to click on 'continue'.  I've also tried the keyboard commands to move to the next screen.  Nothing...

    I just experienced this, and I am recording the solution here for posterity. I got through the setup using the keyboard (tab to move between controls and space to select), thinking that the mouse click would work when I got through it. But I was dismayed to find that it did not ...
    ... at least so I thought! But actually, you have to push down the mouse pad, NOT just tap it. You can turn on tap-to-click later, but at the start you must push it until it audibly clicks. It is not obvious if you are used to Windows laptop mouse pads like me, where tap-to-click is the ubiquitous norm.

  • KDL60W630b - software update check and region check - failing everytime and tv going into initial setup mode

    KDL60W630b - software update check and region check - failing everytime and tv going into initial setup mode I got this today today and when i tried to complete initial set-up. it never completed. TV is going in cycles with initial set-up everytime it connects to my internet and says connected successfully. after it tries to update software and tv restartssame initial set-up screen again i tried keypad button on remote and it took me to tv. i was able to see tv that way but whenever i start tv, it goes back into initial set-up again. any solution for this?

    Hi GC_Sugarland, 
    Thank you for considering Sony Community! 
    I'm sorry to hear that this happens to your TV after the update. Pleas reset your the TV to the original setting. click on this link to guide you on how to reset it.
    I hope this helps. Please keep me posted. 
    Regards,
    Jen
    If my post answers your question, please mark it as "Accept as Solution"

  • Acrobat XI Pro installation failed

    MacBook Pro 13" Retina
    OSX 10.8.5
    3 GHz Intel Core i7
    8 GB 1600 MHz DDR3
    Used Akamai NetSession Interface.
    Downloaded from Adobe website. After download, clicked on installer, entered serial number, quickly went through installing until right at the end: "THE INSTALLATION FAILED: Installer encountered an error that caused installation to fail. Contact manufacturer." Part of the message cut-off abruptly.
    Then, it appeared that the installation did occur but when I opened the software the interface didn't look "smooth." Then almost immediately software update stated Acrobat XI Pro 11.0.04 was available for download, but computer wouldn't allow it to be installed citing error on initial problem. I uninstalled XI Pro and tried to download again from Adobe website but the window instantly opened for Akamai and said download complete. The same problem occured when I tried to install again, with the same error message.

    Thank you Anish.
    The software now appears to be working for some reason, and even though Error 1301 appeared when trying to update to Acrobat 11.0.04, it shows that I am running 11.0.04. There is something going on in there but so far so good.
    Date: Wed, 27 Nov 2013 22:38:11 -0800
    From: [email protected]
    To: <removed by admin>
    Subject: Re: Acrobat XI Pro installation failed Acrobat XI Pro installation failed
        Re: Acrobat XI Pro installation failed
        created by Anish Kumar in Acrobat Installation & Update Issues - View the full discussion
    Following links may be helpful for you:
    http://helpx.adobe.com/x-productkb/policy-pricing/akamai-download-mana ger-faq.html
    http://helpx.adobe.com/creative-suite/kb/cant-download-store-purchase. html
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5882076#5882076
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Acrobat XI Pro installation failed
    To unsubscribe from this thread, please visit the message page at Re: Acrobat XI Pro installation failed. In the Actions box on the right, click the Stop Email Notifications link.
          Start a new discussion in Acrobat Installation & Update Issues at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • T500 Vista buying experience and initial setup problems

    This a long post but I felt the information could be used by others buying a notebook and trying to set it up.
    I have used a Thinkpad T40 (1 GB, XP Pro) at work since 2003  and just love the rock-solid keyboard, screen, and hinges. The IT department has offered me the most recent Dell computer as an upgrade but I much prefer to keep my old reliable T40.
    When my daughter needed a notebook for university in September, it was only natural to consider Lenovo, having heard about too many quality problems with other manufacturers. I wanted this notebook to last through the 4 years without any hardware problems.
    I did a lot of research on the Web and read numerous Thinkpad forums. The information gathered was invaluable for deciding which configuration to buy. Note that I have never used VISTA before, nor have I ever opened a notebook to replace parts.
    Buying experience:
    - On my first contact with the Lenovo Sales desk in Canada, they mentioned there was a special 25% coupon sale, if my configuration was over $1500 (discounted price). These specials come back often, so it is best to check the Lenovo site. At the time, there was a free integrated camera, free upgrade to 250 MB HDD and free shipping. Since these promotions can be removed at any time, I decided to place an online order for a Thinkpad T500, before having completed all my research. It is easy to place an order online. You just have to remember that not all items contribute to making up the $1500, such as MS Office software.
    - Lenovo Sales telephone support for answering any questions about online ordering was outstanding and very helpful.
    - Note that if a particular online configuration is there one week, it might not be there the next week. It depends on parts availability at Lenovo.
    - In order to get the 25% coupon discount, I had to add some items to my configuration to reach $1500, such as Bluetooth, Wifi 5100, which I did not really need, but the saving on the overall cost was worthwhile.
    - I had ordered a WXGA (1280 x 800) High Brightness LED Backlit screen and 3 GB of RAM. After reading about the poor display quality of these screens, I was able to cancel my order by phone the next day (after making sure the same deal was still available), and place a new revised order for a WSXGA+ TFT (1680 x 1050) screen. Since the configuration price for an additional 2 GB RAM was $110 CDN, I decided to buy the extra 2 GB RAM (only $43 CDN) as an accessory, on the same order, separate from the T500 configuration. I could then install the RAM myself to save $67 ! Just make sure you pay the extra to get the base 2 GB RAM on one DIMM, since there are only 2 slots available. I know I will only be using 3.5 GB with my 32-bit Windows, but at least, if one of the DIMMs goes bad, I can still operate on 2 GB.
    - as for choosing which CPU to buy, I chose in the middle range, starting with the first CPU having 3 MB L2 cache.
    - I did not buy MS Office or McAfee Antivirus with the configuration. Since my daughter attends a post-secondary institution, she was able to order MS Office Ultimate 2007 for $64 CDN + $13 for the DVD. Microsoft has had this promotion on their site
     (http://www.microsoft.com/student/discounts/theultimatesteal-ca/default.aspx)
    for a while, but it is not well known. You get 8 MS products for one low price and it is completely legal for numerous countries ! I downloaded the software since it took 5 weeks to get the DVD delivered ! At the end of 4 weeks, I contacted Microsoft to tell them I had still not received the DVD. So I received the first DVD and a few weeks later, I received a second copy. So much for quick shipping !
    Initial impressions:
    - I received 3 separate shipments: 1 free Thinkpad privacy filter to install on the screen, the 2 GB RAM, and finally the T500 (which took about 2 weeks).
    -The stainless steel hinges are rock-solid. When trying to raise the lid in the first weeks, you have to hold down the keyboard. Not at all like the hinges I see on the Dell notebooks at work.
    - The 3 USB port connections are very tight, which means they should last through repeated plugging and unplugging.
    - The T500 is surprisingly quiet, more than my T40. You can hardly hear the fan.
    - I am extremely satisfied with the screen resolution, colours, and quality.
    - The only disappointment was the keyboard ! Typing on the left-hand side (Q,W keys) produced an annoying "clunk". This was the worst keyboard I had ever used, being accustomed to the legendary quality of my T40. Even my daughter complained about the keyboard. I had read on the forums about the "flex" in the keyboard. Before ordering, when I asked the Sales Rep if these known problems had been solved, I was told that yes, the keyboard flex was no longer an issue. Too bad this was not true !
    Initial Setup:
    - Setup was easy. Just follow the on-screen instructions.
    - I was not very happy to see a trial version of MS-Office and McAfee Antivirus on my notebook. I had not ordered it on the online configuration and did not want it. I had read on the forums that other users had all sorts of problems trying to get their own version of MS Office working (activation keys not being recognized), when the pre-loaded software was still there. And I knew how difficult it could be to erase all traces of McAfee by myself.
    Hardware problems:
    - after I burned my very first DVD, I pressed the Eject button. To my surprise, there was a thin grey foam ring (about 3 cm diameter) sitting on top of my DVD media. I assumed that this came from the roof of the DVD drive and the manufacturing process had missed the glue to keep it there. I contacted Lenovo and they immediately sent out a replacement (received the next day), which was easy to install. I then returned the defective part to Lenovo. My only complaint is that this was a refurbished unit. I was expecting a new unit since the part was defective out of the box and not a few months later.
    - for the defective keyboard, I contacted Lenovo and mentioned the numerous complaints on the forums, and they sent me a new keyboard (FRU 42T3938). Unlike the DVD drive, I did not have to send back the original keyboard. However, the replacement keyboard was exactly the same as the original, with a thin flexible backing full of holes. I contacted Lenovo again in the morning and the agent mentioned I should contact Sales, since there was nothing more he could do. That afternoon, the agent called me to say that after further research, he had found a replacement keyboard that would correct the flex. When I received the second replacement keyboard (FRU 42T3210), I knew it was the right one, since there were far less holes in the more solid backing plate. I followed the instructions for replacing the keyboard and added my additional 2 GB RAM at the same time, since it is in the same area, under the palm rest. Now the keyboard is almost like my solid T40, and I am no longer ashamed of the T500 keyboard. For those of you wondering what an ACNOR or CSA keyboard is, it is one where the 5 most common French accented characters (and not only the é) are used with one keystroke. I have been using such a keyboard disposition since 1994 and it is invaluable when typing in French.
    For pictures comparing the defective and replacement keyboards, see
    http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-keyboard-replacement/m-p/158451#M15525
    My immediate goals:
    - out of the box, there are 3 partitions: partitions Q (10 GB)  and S (1 GB) are Lenovo partitions to recover the operating system, C partition is a single partition over 200 GB on my 250 GB DD. I wanted to partition the C: drive in multiple partitions.
    - I also wanted to eliminate MS Office and McAfee so I could install my own software (MS Office 2007 Ultimate and free Avast Antivirus). When I contacted Lenovo to ask how I could do this, they said I could use the recovery partition and "customize" it so that this software would not be installed. Turns out that this option was removed by Lenovo. I guess pressure from Microsoft and McAfee was too great ! The only other option was to use Add/Remove.
    Partitioning problems.
    - I ran Diskmgmt.msc (also available on XP) to see the layout of my HDD. Unfortunately, it did not seem to be powerful enough to partition like I wanted. But it is great to see the layout of the disk and do basic partitioning. (http://www.theeldergeek.com/hard_drives.htm)
    - I installed the free EASUS Partition Manager (http://www.partition-tool.com/); the non-free Pro version works on 64-bit.  I wanted to partition: C 35GB (Operating System and Office), D 20GB (other applications), E 25GB (Data), F 100GB (Music and Pictures). I also installed the free EASUS Todo Backup (http://www.todo-backup.com/) to do regular image backups as I was proceeding.
    - while trying to partition the C drive, I must have made an error somewhere (I think I accidentally declared another partition as the active partition). Whenever I rebooted, I would get the message "Boot MGR is missing". I could not even use the recovery partition (Q and S) on the HDD. So my notebook was totally unusable. Fortunately, I had burned 4 Recovery DVD's, as soon as the OS was operational. The first recovery DVD booted OK. However, the system would not recognize any of the 3 other recovery DVD, displaying a message such as wrong disk inserted or something similar. Imagine if in a few months I had needed to use these recovery DVD that I had burned; they were completely useless and I would have nothing to recover with. Very scary !
    - I explained the problem to Lenovo Support and they sent me within 3 days a set of 4 Rescue & Recovery DVD. By following the instructions, it took 2 hours to recover to a working system. The good: no Office or McAfee trial software came with this recovery. The bad: there was a 2 GB empty partition at the beginning of the HDD and 10 GB of unallocated space at the end of the disk. Why Lenovo would do this, I don't know; seems a bit sloppy to me. Also, I had to manually reconfigure everything, since there is no "just follow the instructions" as when configuring the "out-of-the-box" system. I had to install my own PDF viewer
    (free open source PDF X-viewer http://www.docu-track.com/home/prod_user/PDF-XChange_Tools/pdfx_viewer), Adobe Flash, etc...
    - the major problem in partitioning is the inability to shrink a partition (such as C) in order to free up space after to add extended partitions
    (http://www.howtogeek.com/howto/windows-vista/working-around-windows-vistas-shrink-volume-inadequacy-...). There always seems to be VISTA unmovable files, MBR or something else. After reading numerous posts, I installed the trial version (30 days) of Raxco PerfectDisk Home edition in order to consolidate all the files to the front of the C: drive. A few iterations were required since the MBR seems to be placed in the middle of the partition. I was finally able to partition my HDD exactly as I wanted. I was so pleased with the efficiency and ease of use of PerfectDisk that I bought the Pro 10 version. Just wait for when the software is occasionally discounted. (http://www.perfectdisk.com/home)
    VISTA User account setup:
    I had created my E partition to store all user data of all accounts, since I would have multiple accounts on the computer. I also wanted to store all music and pictures in the Public folder on F partition. There are numerous methods described on the Internet, most of which seem too complicated. See http://joshmouch.wordpress.com/2007/04/07/change-user-profile-folder-location-in-vista/ and
    http://www.vista4beginners.com/Move-user-files-folders-to-another-partition?page=1. I finally decided to do just 2 simple registry modifications described in the last post here
    (http://superuser.com/questions/6391/moving-users-folder-on-windows-vista-seven-to-another-partition).
    It worked for me but use at your own risk ! Just edit the 2 Registry keys and replace the C: drive by the one you need.
    - I only had the Admin account created on the C: partition. Before creating any other user accounts, I modified the registry so that all new user accounts created would use my E partition.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList  ProfilesDirectory = E:\Users
    - I modified the registry so that the Public folder would be on my F partition.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList  Public = F:\Public
    Other notes of interest:
    - I had been a long-time subscriber to the Fred Langa Langalist
    (http://www.langa.com/backups/backups.htm). I now subscribe to the excellent Windows Secrets newsletter (http://www.windowssecrets.com/). The information provided is very useful.
    - I had considered an inexpensive boot manager, partition manager and imaging software (BootIt Next Generation) highly recommended by Fred Langa
    (http://www.terabyteunlimited.com/index.htm). But it seemed a bit like overkill for my needs. There is a fully-functioning trial version.
    - I regularly consult a complete list of recommended free software on Gizmo's Freeware review (http://www.techsupportalert.com). One recommended free open source defragmenter which I did not use was MyDefrag (http://www.mydefrag.com/).
    - download and install the latest version of the Lenovo System Tools (Toolbox). It is very easy to use and can troubleshoot all hardware problems. Search for MIGR-67520 on the Lenovo site.
    - you can find Roxio DVD burning software on the Lenovo site (MIGR-72359 on the Lenovo site). I have not installed it yet.
    - use the Lenovo System Update to keep your drivers up-to-date.
    - for info on how to use switchable graphics, search on the Lenovo site for MIGR-70495.
    - for tips on setting battery parameters, http://forum.notebookreview.com/showthread.php?t=320082
    Recommendations to Lenovo:
    - don't ship poor quality keyboards. You have too much to lose, for the small manufacturing savings.
    - don't pre-install trial versions of Office or McAfee. This should be an option and not be forced onto buyers.
    - at least ship the HDD with a 40 GB C primary partition and the rest as D: partition. This would make it easier for users who are not technical.
    - if you are going to include an integrated camera, provide software to use it. Currently, I have no way of taking a picture or making a video without acquiring other software. The technique described here
    (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67413) does not work !
    - provide some software to reduce the speed of the DVD drive when watching movies. The noise at the default maximum speed is very annoying.
    Thinkpad T500 | Model 2081-CTO | Intel Core 2 Duo P8700 (2.53GHz, 1066MHz 3MB L2 Cache) | 4 GB PC3-8500 DDR3 RAM | 15.4" WSXGA+ | ATI Mobility Radeon 3650 (256MB) | 250GB Hitachi HDD (5400rpm) | Bluetooth 2.1 | Integrated Camera | DVD Recordable UltraBay Slim | Intel Wifi Link 5100 | Sony 6-cell Li-Ion battery | Vista Home Premium 32-bit SP1

    people complaining about problems installing an office over another office are (dare i say it) stupid. it makes absolutely no sense installing one over the trial version. just uninstall the trial and you'll be fine. every single time.
    as for problem with uninstalling mcafee (or any other antivirus, for that matter, just download the uninstaller from the software company e.g. http://service.mcafee.com/FAQDocument.aspx?id=TS100507 for mcafee.
    that said i believe you get to choose if you want mcafee and/or office when you go through the inital boot, the "on-screen instructions"
    you can slow down the odd via power manager
    and thanks for the tips on changing the reg to have the user profiles somewhere else!
    T400s - 2815RW1 + Win7 Ultimate
    Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

  • New MBP 15 retina (mid 2014) freeze during initial setup - any issues?

    Hi all - just picked up a new retina MBP 15 base model (integrated graphics / 256GB / 16 GB RAM).  After turning it on for the first time and running the initial setup the computer froze on the diagnostics and usage page (after I clicked continue).  I had also setup an account and named the computer.  After about 25 minutes of seeing a spinning beach ball, I held down the power button for a hard shut down.  I turned it back on and it went through the initial setup process without issue (although I had to create a different user account since the previous one was recognized).  The computer was pre-loaded with Yosemite and I immediately updated the software with the latest patch.  Also, I noticed both user accounts I had made were stored, so I deleted the first one that I created during the failed setup.
    Should this be a cause for concern?  Everything seems to be working properly outside of the initial setup freeze.  Have any other users experienced this?  Also, I had thought the macbook would have had Mavericks on it and that a manual upgrade to Yosemite would have been required.  Is this an issue with Yosemite?  Apologies for several questions in one post. 

    Hi there again.
    I didn't had any of the problems you mentioned (45' minutes setup). We tried along with AppleCare to make a new partition to the hard disk in order to install OS in that one and boot the machine from it. It didn't help as the machine didn't let me to make a partition. Later on we swiped the hard disk and at the moment where you choose the hard disk to install OS, there wasn't any to choose. Returned the machine to the store I bought it and they sent it to the authorized service center where they told me that the machine just didn't have any OS installed.
    I asked them why there isn't any hard disks available and they told that there was a problem to the file sector of the hard disk. They repaired it and they sent the machine back to me. Regarding why the machine came with Mavericks and not with Yosemite, I suppose that they had the machine in stock (knowing that Yosemite was released after the MBP mid-2014).
    There are still some problems I don't like at all. Safari - opened pdf in browser - fully loaded, scrolling down...cracks.
    I'm not happy at all. That was my first purchase on Apple's computers and I don't know if I will do it again.
    By the way, I noticed the same performance in other computers as well. (click on "About this Mac", then click on "Overview, Displays, Storage" etc. There, I see cracks on graphics between the change to other tabs.)

  • UCCX 9.0.2 AXL account continues to fail on setup

    I am spinning up a new CUCM 10 and UCCX 9.0.2 lab for our engineering department to begin work on testing features of our product against and during the initial setup I tell the system I am doing a "fresh install", the next step is to insert the service provider information. I put in the IP of my CUCM 10 cluster (on the same network) with the AXL Admin user name and the password. In every instance I get the error "Cisco Unified CM Authentication Failed because of the CCMAXL Exception. Please check the logs for details."
    I have enabled all services on this lab box, verified all my AXL usernames/passwords and reset multiple times and yet it still fails on me. I know this is the latest product from Cisco and experience may be light - but do any of you have any suggestions on what I can do to get this going?

    Hi,
    I see that you are using 9.0.2, but is it the base version (9.0.2.10000-71) or the SU1 (9.0.2.11001-24)?
    9.0.2 base is not compatbile with the CUCM 10 and 9.0.2 SU1 is compatible provided the following:
    3.Install ES03 or later version on Unified CCX 902SU1 to work with Unified Communications Manager 10.0(1).
    You can check this in the compatibility matrix:
    http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
    Also, please note that we have had a lot of issues with 9.0.2 SU1 ES03 and we have deferred customers from using it. The fixes for the problems in ES3 and the fixes for which ES3 was released has been issued in ES4.
    So please upgrade to 9.0.2 SU1 ES04 in case you need it to get going with CUCM 10.0
    Hope this helps!
    Regards,
    Arundeep
    CCIE Voice #40132

  • Acrobat XI pro upgrade fails during installation.

    Upgrade from Acrobat XI to XI pro fails.  "Setup detects that you already have a more functional product".  What gives and how to recover?  Windows 8.1.  I have a folder on my desk top with Acrobat XI setup.exe file.

    xi standard is not upgradeable to xi pro, http://www.adobe.com/products/acrobatpro/buying-guide-upgrade-pricing.html
    http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

  • Does MBP need to be connected to internet at initial setup?

    Will it cause trouble to set up the internet connection later?
    macbook pro 2.16GHz   Mac OS X (10.4.6)  

    You don't need to be connected for the initial setup. The registration can be sent later.
    MacBook Pro 2.16   Mac OS X (10.4.6)   100GB 5400rpm, 1GB RAM

  • Error during Initial setup of functional unit Development Infrastructure

    Dear All,
    During the template installation of DI all-in-one (Initial setup of functional unit Development Infrastructure (DI all-in-one)) I get an error at Step 64/96 Upload Default ACL Settings.
    Error: not a valid URL: unexpected character found [':' at position 7]
    Step: Upload Default ACL Settings
    Does anyone know how to fix this issue?
    Kind regards,
    Joost Christenhusz

    Hi Lee,
    I think I know how to solve this. I have just solved a similar problem with my PI 7.1 EHP1. Deployment in JSPM of various software components all failed like this example:
    JSPM log:
    Deploy status is 'Aborted'
    Client path '
    pi71\sapmnt\trans\EPS\in\SAPXIAF04_7-20002649.SCA'
    Description:'1. ERROR CODE DPL.DS.5089  Exception during generating components of sap.com/com.sap.aii.af.app  application in webservices_container container.
       -> com.sap.engine.services.webservices.espbase.configuration.BindingData.getConfigurationType()I'.
    Default Trace:
    Caused by: java.lang.NoSuchMethodError: com.sap.engine.services.webservices.espbase.configuration.BindingData.getConfigurationType()I
    at com.sap.engine.services.webservices.server.deploy.WSBaseAbstractDProcess.getBindingDataId
    After that most of the browser based admin apps, such as NetWeaver Administrator ( /nwa ), would refuse to start.
    But finally after several tests, searching on SDN+SMP and restore to backup version I found the solution in [SAP Note 1328776|http://service.sap.com/sap/support/notes/1328776] which describes a similar problem: Update to the newest version of ENGINEAPI 7.11. Today this is ENGINEAPI04P_4-20002603.SCA.
    You may also want to make sure that you are running the newest version of the Configuration Wizard, so you should check/update LMTOOLS, LMCTC and LMCFG*, currently LMTOOLS04P_3-20002705.SCA, LMCTC04P_1-20002694.SCA and LMCFG04P_4-20002729.SCA.
    I hope this proves to be useful.
    regards
    Mauri

  • Initial setup of functional unit Development Infrastructure (DI all-in-one)

    SDN Team,
    When we login in into  NWA
    In deploy and change tab we find 9 wizards.
    But i could not see below wizard for NWDI configuration
    Initial setup of functional unit Development Infrastructure (DI all-in-one).
    Please let me know their are any prerquisities to be done??
    Thanks
    Srikanth

    ideally you should not use NWDI as an Add in, it is not a recommended scenario.
    For problem shooting this I would look in the Server0 directory for the RFC trace file which should show you what the issue is.
    If not I would then log onto the ABAP system with NWDI down, go to SM50 and increate the trace level of all DIA Wp's but only have the Security component ticked... then I would start up the J2EE and after it has failed to connect I would look through the trace files (after turning off tracing) looking for the word sapjsf. That should tell you exactly why it is failing.
    hopefully the sysnr below of $$ was just a typo.
    Ensure it is client 001 that you have changed the sapjsf password in (a common error)

  • PSQ Import in Premiere Pro CC fails

    Hello,
    I noticed that PSQ (Adobe Premiere 6 Storyboard) file import in Premiere Pro CC fails with a General Importer Error, although it's officially supported as stated in the manual (http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html). Import in CS6 works without problems. I already submitted a bug report.
    Since I'm using this feature quite a lot - it'd be great to have this working again asap.
    Can you please help and fix this?
    Thanks a lot!

    Hi Jack,
    Please check the below Forum thread and roll back to the Initial version 7.0 of Premiere Pro CC. You can choose to update Premiere Pro CC to the desired version from the below links.
    http://forums.adobe.com/message/5827476
    Updates:
    For MAC:
    http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Macintosh
    For Windows:
    http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows
    Regards,
    Vinay

Maybe you are looking for