PRO-100 GETTING SUPPORT CODE 5400

Have printed a whole 5 photos last year when got printer. now project is a go . fire up printer get support code 5400. printer making banging noises. print head not coming to center when i open printer for access.no paper etc is in the printer.cant believe its dead after 5 prints.caling tech support monday, hopefully we will get instant action.put canon slr purchase on hold till we see how this is handled.

Talked to support they determined circuit board is blown. Wow after only 5 printouts! Canon wont honor the warranty because it was bought from an ebay seller. Doesnt matter it was new and sealed. Be interesting to see what squaretrade will do next. I've now taken Canon OFF our approved purchase list company wide. Will recommend same to our clients. Looks like for cameras its Nikon, Panasonic, and Sony etc.. for now on... Printers and other products will be purchased from other vendors from now on. I'm curious about the new epson printers that come with bottles of ink... i've also noticed lots of comments online with people having various issues with this printer.

Similar Messages

Tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"

tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?

This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody.

I have a new MX922. All of a sudden I get Support Code C000 printer error has occurred

I have a fairly new MX922. All of a sudden I get Support Code C000 which says printer error has occurred. There is nothing in the print cue. I have restarted my computer. I have turned the printer on and off. I have turned the printer off, unplugged the printer, plugged it back in again, and turned on. The same message and flashing light for the error is still there. I can't operated my printer. Can anyone help me?
Thanks,
Kathy

Hi Soot!
So that the Community can help you better, we will need to know the computer operating system you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other error messages or details you'd like to give will also help the Community better understand your issue.
Thanks and have a great day!

I just set up my PIXMA MX922 and am getting "SUPPORT CODE 1008" error message.

It reads "no paper in lower tray", but there IS paper in there. When I press OK, it just doesn't seem to pick up paper from the tray...it works at it for a minute, then get the 'support code'. What do I do?

I have the same problem. Tried your solution. Not fixed.

Canon 452 support code 1250

I have a new canon 452 and get support code 1250 both from my macbook as well as from my iphone 5. Appreciate any help

Hi araten,
To try and resolve the 1250 error, please ensure that the printer is located on a flat surface without anything underneath of it, and also ensure that the paper output tray of the printer is open. If you still experience the error, please click on the Contact Us link below for further assistance.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Support Code 2804 on Canon MX922

Support Code 2804 MDF failure to scan. 'doc size not suitable for duplex scanning'. Win 7, Pixma MX922
Tech support tried valiantly to figure this out but could not, so I'll share my solution. I suddenly kept getting Support Code 2804 failure on MDF after duplex scanning several hundred pages of docs to PFD files. Three calls to TS yielded nothing but a guess that document paper had some kind of security to prevent scanning. I've not heard of that, but it was a clue that I researched.
Here my answer to the 2804 failure, but it's not good. Scanner feeds first page, and displayed the error saying doc size not suitable for duplex scanning. All you can do is clear the error
Measure your document. Printer docs say ADF will work with 4x6 and 8.5x11. Read that literally. My financial institution switched to a 8.5x10.3 page size. When I got to those docs, the error began. I have not yet experimented on the MINIMUM document length, but the 10.3 definitely fails.
This appears to me to be something that could be fixed. Not sure if is hardware of software, but is a definite drawback to an otherwize good scan process.

Ebony, I'll spell out specifically what could be inferred from my post. 11 inch paper works, 10.3 inch paper fails. I'm not sure at what point between those two lengths the failure begins. Some experimentation with various lengths could more precisely determine that, but Canon should do that research themselves. The point is that it makes no sense to me that this limitation exists. The mechanism should continually feed whatever size, within reason, that is fed as long as it detects more pages. Obviously as some point the doc will be too short to feed correctly, but a difference of seven tenths of an inch is reasonable to expect functionality to continue. Having 42 years of software development behind me, I really feel this issue can be fixed programaticly, be it driver or application.

Support code 5011, any ideas what this means.

I purchase a MX452 printer upon start up I'm getting support code 5011, any ideas what this means.

Hello everyone,
If the error remains after unplugging the printer for at least 10 minutes, it may require service (and please note that unplugging it will delete any faxes stored in the machine's memory).
It would be best to get in touch with our technical support team at http://bit.ly/Phone_Support for further assistance.
Thanks!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I keep getting Exit Code 15 - already went through solution 1 and 2 of the support sites

I am on MAC OS 10.8.4, MBP 2012 17", 16 GB RAM
I try to install remaining Apps of CC:
Premiere Pro
Dreamweaver
Edge Animate
Exchange Panel
Extend Script
Extension Manager
Flash Builder
Prelude
SpeedGrade
Touch App
I get Exit Code 15 everywhere with "0 fatal Errors and 0 Errors" except Premiere where it is "0 fatal Errors and 1 Error".
Tried Solution 1 with fixing accessrights on HDD and reinstalling - still same issue.
Tried Solution 2 with plist editing - get an Error in terminal while cleaning entries "No such file or directory"
So how should I fix this? Reinstalling OS is not an option.

Then Digitalsalate I would recommend contacting our support team. Please refer the support representative to the internal version of the Exit code 15 installing | Mac OS X | CCM, CS6 - http://helpx.adobe.com/creative-suite/kb/exit-code-15-installing-ccm.html. You can contact our chat support at http://adobe.ly/yxj0t6.
I would also recommend referencing this discussion so the support representative can also review the steps you have implemented so far to resolve your difficulties.

I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?

I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?

Hello Unconscious2015,
Thanks for using Apple Support Communities.
If you are trying to configure your Mac to use SMS continuity with your iPhone, then please follow the directions below to configure SMS Continuity.
To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
On your iPhone:
Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
Take care,
Alex H.

I keep getting error code (-45054) when I try to authorize my new Macbook pro. We only have 4 devices authorized to this account.

I keep getting error code (-45054) when I try to authorize my new Macbook pro. We only have 4 devices authorized to this account. I dont know how to fix this. Anybody help?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

How can I get my Pro-100 to print 12x12 page size? It won't let me set that size.

I use 12x12 paper for scrapbooking. Every time I set the paper size for 12x12, the printer says to choose the A3 size (11 x 16). But then there's a wide margin of white left over. How can I get the printer to print edge to edge?

You need to buy a paper trimer. Office Depot has several to choose from. Believe me and save your self a lot of headache and just get the trimmer. Print what you want on a larger size paper that the Pro-100 accepts and trim away.
Are you using a post editor like Photoshop Elements? If not I highly recommend you buy it, too. There are others, some are even free, but PSE is the best.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

Currently using Flash Pro CS5, getting error when trying to open CS4 file. Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version. Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

Having the same problem in CS6. I can tell you that converting back to CS4 will NOT solve the problem. It seems when support for backward compatibility is discontinued, there's just no way to get
any help at all? Absolute failure to provide any user support so far...

Can't print to my Canon Pro-100. Get error message:There was an error opening your printer. Printing

Can't print to my Canon Pro-100. Get error message:There was an error opening your printer. Printing functions will not be availableuntil you have selected a printerm and reopened any documants.

Your printer driver is having problems.
Resetting Photoshop's preferences sometimes clears it up (by removing previous print settings that the driver is supposed to read, but sometimes fails at).
Otherwise you'll have to work with Canon to figure out why the driver is misbehaving.

I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

I had to wipe out my laptop, I am waiting to get my serial number back. I need to know how I download Logic Pro 9 with the codes I already have.

If you bought the boxed set of Logic Studio 2.0 which includes LP9, then you cannot download it. You must use the disks that came as part of the boxed set... to install from.
If you bought the App Store version of Logic Pro 9 then go to the Mac App Store App, Sign into the Store using the same Apple ID you used to purchase LP originally, look under the Purchase Tab and you shouldl find LP9 ready and waiting for you to download and install.

Anyone else having problem getting promo code for $100 gift card??

This is ridiculous. I upgraded from an LG chocolate touch to the Thunderbolt and still have NOT gotten my promo code for $100 gift card. Is this happening to anyone else? I've called customer service to no avail. I'm supposed to get a clal back this Sunday to see if the code came through yet. This is the only reason I upgraded right now. I am not a happy customer.

We upgraded my daughter's LG ENV3 to an Iphone on 08-18-11. The salesman told us we'd be getting a promo code in 5 days by email or SMS. Still hadn't seen it by the middle of September so we started calling customer service. Over several hours, we spoke to five different people and received five different reasons why we either would get the code or wouldn't get the code, ranging from we didn't quality (false) to your email is rejecting the code that we've sent numerous times (also false). We were told that they could give us the code over the phone, but that particular person didn't know how and then we were told that the code could never be given over the phone. I finally walked into the Verizon store where I bought the Iphone and got the manager on the case. It took him 2 days talking to multiple people in Verizon, who I as a mere paying customer could not contact on my own, to finally get someone who was willing to send the code again (or was it being sent for the first time?). That problem solver somewhere in the bowels of Verizon told me on Friday, Sept. 30th that I should be getting the email any minute and to keep checking and he would call me on Monday, Oct 3rd to make sure I received it (Big surprise he never called back on Monday). On Saturday, Oct 1st I still hadn't received the email to either of the email addresses that he said he was sending it to so I started checking the boards here and realized that I was not alone in my misery. I took somebody's suggestion and sent a PM to on of the customer service people on this forum, explaining in detail my problem and still haven't received a response from her. Needless to say, Daisy at Verizon won't be receiving any Kudos from me. FInally, on Monday night I received an SMS with a working code that was accepted by the trade-in website. Hopefully, I get my $100 but I won't hold my breath. I've been with Verizon for years and currently have five phone on my account. I've had a variety of customer service experiences with them over the years, some very good and some not so good, but this $100 gift card has been a real eye opener in customer service ineptitude.

PRO-100 GETTING SUPPORT CODE 5400

Similar Messages

Maybe you are looking for