Pro-100 having photo problem what I see in monitor I get darker image.

I just bought this printer and I am trying to get familiarized, I am printing from CANON My image Garden, photoshop Element 11, from Canon power shot A1000, Canon rebel XTI, Windows printing media, I still get the same darker image, and like a film on top of the picture, tried to make lighter image still the same. Any body can help me?

I would discourage printing directly from the camera. Not that it is not possible but the quality is no where as good as you can make it if you have PSE or PS, LR4 or some such post software.
It is essential that your monitor shows what your printer is printing. Skip this step you can forget it. But you don't need any fancy equipment to accomplish it. D/L a color chart from the web and by trial and error you can get them really close. No difference than when we used to do it in the darkroom! A little time consuming but you can do it.
I suspect your camera and the printer are not calibrated to each other. It may not be possible to sync all three so my advise is go with your monitor and a post processing software.
I personally use CS6 with a Canon 9000 Mk II printer. I have two 27" monitors. I calibrated one monitor to the printer and than calibrated the second monitor to the first monitor. I usually have PS on monitor one and LR4 on the second one.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

Similar Messages

Need software to print on my new PIXMA PRO-100 does anyone know what software should I use?

Need software to print on my new PIXMA PRO-100 does anyone know what software should I use?
Any help or link will be great appreciated.
Thanks.
Solved!
Go to Solution.

A DVD caame with the printer. Why not use it? Lost it, just d/l another copy from Canon. It' free.
But the best is Photoshop Elements.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

PRO-100 margin print problem

Did a PRO-100 driver update recently (11.7.1.0) on my MacBook Air 10.9.5, and the right-side printing gets cut off when print articles on regular "letter paper". Not sure how this can be corrected? Thanks.

ebiggs1, thanks for a reply and i will tell you what i know.
1. am not real computer literate, so i probably don't know some basic things....
2. This Mac was purchased about 5 wks. ago and all i have done besides the canon printer update is update Firefox (this is the browser i use), Adobe flash p. and reader, downloaded Libre Office and Carbon Copy Cloner.
3.examples of what I print would be paragraphs in a discussion on a camera review site, or a recipe off a food website, etc., or an email i got.
4. Since writing about my problem i experimented by clicking View on the top Firefox bar and zooming out 2X (the print size has been TOO large, also) and i also checked the box on the print screen, "Ignore scaling and shrink to fit page width"... doing these 2 things seem to solve my problem, but if you have other insights i always like to learn.
Thanks again!

Pixma Pro 100, new install problems

I just bought a Pro 100, everything is new. Trying to intall the print head but it would not "center" when I opened the cover to intall the print head and ink. I pulled it to cented, installed the print head and ink. Getting error light, flashing 3 times. Also, I noticed I didn'r get any lights on the ink cartridges. HELP! Please.

First never pull or push the print head mechanism. But at any rate did you make sure you removed all the packing material, some is pretty small?
Load some A4 paper.
Hold down the RESUME/CANCEL button until the Power lamp flashes four times, then release it immediately. The print head alignment pattern will be printed and the printer will adjust the print head position automatically. Do not perform any other operations until the printer completes the printing of the print head alignment pattern.
You cannot feed paper from the Front Tray for aligning the Print Head. Load paper in the Rear Tray
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

I am having a problem when i open a new tab with multiple images. If there is more than five or six images they won't all open.

I open emails with multiple images. The new version is having a problem opening a tab with more than maybe 6 or 7 images. Older versions sometimes had the same problem but the unopened images appeared on the page as a small blank box that you could try to reload. Not anymore. Now you have to reload the whole tab. Sometimes this works other times it doesn't.

You seem to be using a beta version. Maybe go back to a regular release and wait for V. 30 to become a regular release, and maybe whatever bug it is will be fixed.

I have a macbook pro, a mini display port to hdmi cable to hook up to my tv (a toshiba 1080p flatscreen). what do I do to actually get the image on the tv screen? Do I need another cable for sound?

I am trying to watch a tv show that I purchased into I-tunes. I have the cable and it hooks to the TV okay. The TV shows the regular apple screen that looks like the universe screen - like when it boots up or is doing an upgrade on the OS. I can't get the image to go from the laptop to the TV. I tried under displays and it shows the TV as a display but I can't get the image on the TV.......Please help.

Rwogera wrote:
I couldn't transmit sound either, do i need another cable like Kim said? i mean it cant be transmitted through this HDMI port? as for me i have one of the latest mac pro with intel core i5..tnx
I need to know which MacBook Pro you have. Only mid-2010 and later MBP's transmit sound through MiniDisplay Port to HDMI. I have no information about the Mac Pro, so you might want to go to that Forum and ask there.

Hi my mac book pro is having some problem with mouse , With out my actions it's automatically running for example If I open some site the arrow is automatically pressing every where if u don't mind can u suggest me what I have to do

Hi
I am facing some problem mouse arrow with out my actions it's automatically running for example If I open a some site the arrow mark is going every where and automatically pressing and the particular sites are opening if u don't mind can u suggest me what I have do

If you can still access the machine and haven't wiped the drive, open the Mac App Store, log in to your Apple ID, and try to download Mavericks from there. If it works, make a bootable USB from the
Mavericks installer (google how to do this). Then boot to the USB wipe the drive and install Mavericks clean. And since it shoudl be associated with your Apple ID at that point you shouldn't have any issues.

New Mac Pro seems to have problems - what type of re install?

I have a relatively New Mac Pro (2x 2.8 ghz 8 core with 4GB ram). I upgraded from a G5 and ran the migration assistant as normal. I use a lot of programs and use it daily on a professional basis. Mostly used programs are Mail, Safari, Photoshop, Bridge, Indesign, iview media Pro, Rapidweaver, to name but a few.
I have noticed some issues, such a computer running slow, taking its time to do very simple operations. I also have Adobe software misbehaving and crashing, especially Bridge and Photoshop that often comes up saying "could not complete request because of a program error"
I thought that I would completely wipe the drive and start again, but this a lengthly process - especially when it comes to preferences, settings, mailboxes, etc etc.
The question is should I archive and install, or reinstall or indeed try anything else first?
Thanks in Advance..... Mark

There are some simple troubleshooting you can take.
Create a new User go to System Preferences >> Accounts >> "+" (make it an admin acct) and test the apps in this new account, if they work the problem is isolated to your User and not systemwide.
If the issue is limited to your user account try starting up Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
If your apps functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
If the issue is systemwide then, you may be able to repair this with the 10.5.6 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj

I'm using a 2007 MacBook Pro and having a problem updating to IOS 6. Is this possible on my device or is my computer too outdated for the IOS 6 update?

I aquired my used MacBook Pro when entering college three years ago. When the IOS 7 iphone update came out yesterday I updated my iphone. After the update I attempted to sync my iphone to itunes on my MacBook Pro. When attempting to do this I recieved a pop-up that stated I would not be able to sync my iphone with IOS 7 to itunes until I downloaded itunes version 11.
I then visited the itunes site to download this version of itunes. When attempting the update, I recived a pop-up that stated I was unable to download this version of itunes because my MacBook Pro does not have IOS 6 installed.
I am not sure how to install IOS 6 or if my computer is able to update to IOS 6 since it was made in 2007. I occasionally have difficulties updating other programs because my computer is outdated and I was wondering if IOS 6 is the same.
Thanks for your help.

It sounds like it is not allowing you to install the newest version of iTunes because you do not have OSX 10.6.8 installed. Click on the  -> About This Mac and check the version number. If it is anything less than 10.6 you need to purchase Snow Leopard from Apple.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

Is my iPhone is having multiple problems, whats wrong and how can I fix it

My iPhone 3G ¡OS 5.1.1 is always searchIng or saying no service where the signal bars are and when I try going on the Internet, send txt, email and more it say turn on your cellular data when it is on. And every now and then my phone will **** off and either cut back on, or pop up say activation required. what wrong with the phone why does it keep doing all of this and how to fix it

If you are using the iphone as designed ,then all of this is on your computer.
You should be importing all pics taken with the iphone to your computer regularly. All apps purchaqsed on the iphone should be transferred to your computer. Contacts/calendars should be synced to your computer.
Restart loses nothing.
Reset loses nothing.
Restore from backup will put everything back if you have stored it all on your computer.
Restore as new will erase everything. If you have everything stored on your computer as you should, then you can put everything back

I have a macbook pro with retina (late 2012) what is the best monitor for work?

I would like to purchase a monitor to connect to my laptop with good resolution that will be better for my eyes. Do you think that I will expirience problems If I get a 4K monitor and Ill run it with full resolution @30hz? i do not use any videos in my work or gaming. I am a commercial real estate broker. Just internet use and exel. Thank you in advance

A Dell ultra Sharp would be a good buy. Depending on what size you want:
http://www.amazon.com/Dell-UltraSharp-27-Inch-LED-Lit-Monitor/dp/B00P0EQD1Q
Otherwise, if you don't mind spending the money, and not worried about not using the monitor to its fullest this BENQ is an excellent monitor
http://www.amazon.com/BenQ-BL3201PH-Monitor-32-Inch-LED-Lit/dp/B00O1B5M9I/ref=sr _1_11?s=electronics&ie=UTF8&qid=1424384286&sr=1-11&keywords=4k+monitors

I want to buy a mac book pro to edit video on what computer and software do I get?

I want to buy a mac book pro to edit video on. What kind of specifications do I need to make sure Final Cut runs smootlhy. And do I need Final Cut studio or Final Cut X? The software is for beginners?
Thanks

Ok great - Im by no means a professional editor I have done a fair bit of video editing for online, presentation and awards videos in my previous jobs, and was advised by a previous trainer to get a mac and final cut pro as working of PCs and with Sony Vegas was time consuming and inefficient. I am buying a whole new set of equipment for my office and hope to get the department all trained up on it in the next year.
I will be learning to use the software but I will need it to make professional videos in the end so I don't think imovie would be appropriate? Thanks for the advice though - I will be prepared for the learning curve.
Any other advice on which Mac to get also much appreciated.
Thanks

I'm having a problem installing the Muse update. I get the error:

Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DF024 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
----------- Payload: Adobe Muse CC 2014 2014.3.0.1176 {4FC5F06E-31E5-4C22-9449-CB41B62D1897} -----------
ERROR: DF024: Unable to preserve original file at "/Applications/Adobe Muse CC 2014/Adobe Muse CC 2014.app/Contents/Frameworks/adbeape.framework/adbeape" (Seq 10)
I've tried (from a discussion on color profiles error DF024) renaming the adbeape.framework folder. I then get a slew of error messages. Any suggestions?

I did not remove the uninstaller, but it is not in the Utilities/Adobe Installers folder. There is an uninstaller alias in the Muse program folder, but it points to nothing . . .
I tried removing the OPM.db file and reinstalling the Muse update. It still fails with the same error message.
Instead of uninstalling all CC, running cleaner, reinstalling all CC, and finding and reinstalling all my third-party Photoshop extensions—using most of my day, I believe I will live with Muse CC2014.2 and update reminder.
Thanks for all your help, anyway

I have the latest version of iPhoto and now I don't have the Apple templates for emailing photos. What happened? How can I get them back?

I have the latest version of iPhoto and somehow I have lost the ability to use the Apple iPhoto templates for emailing photos. I select my photos, go to Share, go to email, and the templates used to pop up. Now the photos go directly to email. Does anyone know how I can get the templates back?

I encountered the same issue after an upgrade of iPhoto, and it was resolved by clicking on the "iPhoto" button on the menu on the top left of your screen, then "preferences", and in the very first window (General), select the very last pull-down menu "email photos using".
There, you can select various email providers, aol (if set-up), Microsoft outlook, etc... and of course, iPhoto (which should be the very first choice on the pull-down menu).
Select iPhoto, and you will immediately be able to use the templates and make cool cards when emailing your photos from iPhoto.
I hope this helps if your question has not yet been answered.

Macbook Pro has no modem.. what kind of internet can I get?

I've been stuck using dialup internet on an ancient Windows desktop since I was 14 years old, I just bought my first Macbook Pro about a year ago. Yay!! I've been using AT&T Wireless Internet using a USB internet card since I've bought this laptop. I'm about to be moving into my first apartment and would love to have DSL or Highspeed internet so I don't have a monthly GB limit useage. Since my Macbook Pro has no modem, am I able to get DSL or Highspeed internet with AT&T? I've been stuck in the darkages using dialup for so long and haven't been able to stay up-to-date with anything beyond dialup internet. Help! (Thanks!)

Fatty Assid wrote:
I've been stuck using dialup internet on an ancient Windows desktop since I was 14 years old, I just bought my first Macbook Pro about a year ago. Yay!! I've been using AT&T Wireless Internet using a USB internet card since I've bought this laptop. I'm about to be moving into my first apartment and would love to have DSL or Highspeed internet so I don't have a monthly GB limit useage. Since my Macbook Pro has no modem, am I able to get DSL or Highspeed internet with AT&T? I've been stuck in the darkages using dialup for so long and haven't been able to stay up-to-date with anything beyond dialup internet. Help! (Thanks!)
Highspeed Internet, DSL or Cable, uses a special external modem, not a dialup modem. You'll get that modem when you sign up for the Highspeed service.

Pro-100 having photo problem what I see in monitor I get darker image.

Similar Messages

Maybe you are looking for