Pro/1000 CT drivers and disappearing firewall.
I have upgraded my ethernet drivers to v7.4.19.0 for my MSI 875P Neo-FIS2R (MS-6758). After the update, I found that my permanent IP and DNS numbers are gone and that the properties panel for Local Area Connection has drastically changed. One thing that has changed that has me confused is that the firewall control has completely disappeared, I can't find it anywhere. And what's this network bridge item in my network connections? Does anyone know where the firewall settings are located now? Thank you. :-)
On the properties page of the Local Network Connection, there used to be settings for...
Client for Microsoft NEtworks
File and Printer Sharing for Microsoft Networks
QoS Packet Scheduler
Internet Protocol [TCP/IP]
All of these items have been moved to the NEtwork Bridge item in the Network Connections folder and under the properties of Local Area Connection are now 2 tabs "General", and "Authentication". On the General tab is a button that says Configure, and under that are tabs like "General", "Advanced", "Driver", "Resources", and "Power Management". The firewall control I am inquiring used to be on the properties page for Local Area Connection and it has now disappeared. I cannot find it on the properties page for either Local Area Connection, or Network Bridge.
Similar Messages
-
NForce ethernet drivers and buildin firewall
I have the 7030 board, and I have some problems with the nForce Ethernet drivers and buildin firewall.
When I try to update the Network access manager with the latest v5.10 driver pack from Nvidia I get the following error.
"1: The installscript engine on this machine is older then the version required to run this setup. If available, please install the latest version of ISSCRIPT.MSI, or contact your support personnel for further assistance."
then I get this error
"1603 fatal error during installation"
I followed this link and installed a patch "IsScript9.zip" that did not work. Hope someone has a sollution to this problem.
My other problem is with the firewall, when I try to change the firewall settings to any setting, I get this error "Error in FwlProfiles Set : Unable to find profile." and the firewall setting does not change.
Extra question, does the audio driver that comes with the Nvidia/nForce driver pack not work with the onboard sound card?
As an extra bonus, and to my amusement I cant search this forum I get THIS ERROR!
"Fatal error: Allowed memory size of 16777216 bytes exhausted (tried to allocate 35 bytes) in /var/www/web5/html/acp/lib/class_db_mysql.php on line 83"
Thank you for any help.As a point of information, I also got that error message. To get it to work I had to uninstall the Nvidia Drivers, then I ran the isScript app, rebooted and re-installed the nforce drivers, it worked. On the manual installation, when you unzip the drivers to a location, make a note of the location. Then go into Device Manager, Network Adapters and Nvidia NForce. Locate the Update Driver tab and point to the location where you unzipped the files.
-
Windows 8.1 pro upgrade stops drivers
I have a top-quality All-in-One device Photosmart C7183 which has been working for a long time without problems, including a transition to Windows 8 pro. But, after applying the upgrade for Windows 8.1 pro, all the drivers and softs stopped working, it was hardly to delete them manually to attempt to reinstall, and (!) the associated driver soft file AIO_CDA_FSW_Full_Win_WW_140_408.exe does NOT RUN at all!
Whether you can advise me anything, please?I could get nothing from the native HP software and did as follows: I have downloaded from Internet and installed a generic printer driver with the Win 8 printer setup utility . For support of operation of the scanner I have installed excellent program VueScan. All operates correctly. The only that I have to do manually is sending a fax .
I have in my home network two more Sony Vaio computers and all of them work with the All-in One device through Wi-Fi without problems, using the native HP software. But they have another Operation Systems: Win 7 and Vista.
P.S.
I tried to install scanning programs from HP, offered in the Shop. They were installed, but did not find out the scanner! -
Re: Intel PRO/1000 PT Quad Port / xserve, osx 10.8.2 and intel gigabit quad port LP card
Hi Antonio, this an old discussion than i don't have found an issue.
I have bought the intel ethernet pro/1000 quad port Low Profile Server, i have installed it into the xserve.
I have downloaded and installed the drivers of small tree website, and i follow the instruction of this knowledge pages.
http://www.small-tree.com/kb_results.asp?ID=44.
But the xserve doesn't recognize the intel ethernet card.
Have you an idea to help me?
thanks a lot for your precious help
ManuelHI Sam,
No at this time, i haven't issue for this problème.
But, i try intel card soon with a mac pro.
The xserve detecte the card, but not recognize the drivers for it.
maybe one day, i have good new.
Manuel -
This is a large format printer used for proofs that I cannot use since upgrading to Mountion Lion, anyone else had printer issues?
Checked RoaringApps App Compatibility Table. These are apps not drivers but..
All I see listed is:
- Epson LFP Remote Panel 3.6.1 and with a ? under Mountain Lion
- Epson Printer Utility 4 8.6.1 and red X indicating non-compatibility with Mountain Lion
- Epson Scan 3.7.5 and a green check mark showing compatibility with Mountain Lion
http://roaringapps.com/apps:table/tags/_e/index_tags/_e
On the Epson Website. Under Drivers and Downloads for the Stylus Pro 7700 with Mountain Lion, it looks like there is:
Drivers:
- Printer Driver v8.63
Utilities:
- Remote Panel 2 Utility v1.30
- Uninstall Center v1.1.0
Firmware:
- Firmware Update version KND14BA
Epson Stylus Pro 7700 Printer - Drivers & Downloads
Did you download and install all of these from the Epson website? -
hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .
Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp -
Drivers and software Hp deskjet 2050 j510a All-in-wonder for Windows 8 Pro x64
Hi,
from when I update my system with Windows 8 Pro I can' t use the printer Hp Deskjet 2050 J510a.
I downloaded the latest version of drivers and software for Windows 8 Pro 64 bit:
DJ2050_J510_Basicx64_1313.exe
The application give me at the and of installation the message:
"installation not completed"
and in details I can see:
"Installation error. Operative system not supported. This software can be installed only in Windows XP, Vista, Seven. Change operative system or install the printer in another computer."
The printer as been recognized from the system, and in panel control I can see it, but when I print any page the printer make only half print and than show me a message of " not original or used printer cartridges, press OK to continue or cancel do delate the print" but the print cannot be completed untill the end.
Cartridges are original; I tested the the printer too in an another computer with different operative system: the printer work correctly.
Thanks for your attentionHello kamran554,
I understand you are looking for the driver to download for your Deskjet 2050 J510a for Windows 8 64bit.
I have located the correct driver for you to download below.
Please click the link to download and install.
HP Deskjet Full Feature Software and Drivers
Good luck to you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
I have a macbook pro, and i want to transfer my hard drive from my macbook (500g), but the display drivers and such are different. How do i do this and is it possible?
The Macbook Pro has Mac OS X 10.4.11 (70g hard drive)
The Macbook has Mac OS X 10.6.8 (500g hard drive)The MacBook's hard drive lacks the necessary hardware drivers to boot the MacBook Pro even though it has a much newer OS on it; that's why simply moving it into the Pro doesn't work. Presumably you have a very old MB Pro, because only the very first MB Pro model (produced January to May 2006) was ever offered with an 80GB hard drive. Are you sure you want to move your big drive into such an old machine? The MacBook must be newer, because the first MacBook was introduced just as the first Pro model was discontinued.
-
Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoitThere is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up -
I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!
Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems. -
I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message : "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
PLEASE HELP!Hi Delarey,
Please go to the following location and rename the folder to old_folder name
User/user library/Application Support and rename Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
Make sure that you are in user library if you are not sure check the link below.
Access hidden user library files | Mac OS 10.7 and later
Regards,
Vinay -
I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again" when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
Anyone?
ThanksHi Stan.
I had the same problem as you did though I am using Adobe CC. I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version.
Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup ) first and updated my NVidea card to no avail. Eventually what did the trick was this...
After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it. Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again. I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care. That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
Let me know if this works.
Cheers and good luck -
i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?
How did you get them to install the first time and where did you get them?
Read the Installation Guide, Boot Camp 4.0 FAQ and the Windows 7 FAQ.
Here's the Boot Camp Manual. -
Gigabit EtherChannel between 6509 and Intel Pro/1000 MTx
I am trying to configure gigabit etherchannel to connect our backup server with a 6509. The Intel Pro/1000 MT nic in the server has two gigabit ports and supports teaming using LACP. I have configured two gig ports on the 6509 as layer 2 etherchannel ports ( channel-group 2 mode active ). The switch ports always show up as disabled. I can't seem find any documentaion on connecting server to switch using etherchannel ( although the Intel Pro MT nic documentaion does mention it ). Does anyone have experience doing this ?
We always just use load balancing on the Intel NICs and do nothing with the switch but make sure that the ports are in the correct vlan.
We have been using this for over 3 years flawlessly.
Our switches are a Cat4006 and Cat4506. -
I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.
Try deleting the printer, deleting the job queue and reinstalling the printer again.
Maybe you are looking for
-
Disk could not be read or written to
I get the 'disk cannot be read or written to' message when trying to put music onto my ipod 80g. after ejecting, all the music and anything else on there is gone. how can this be fixed?
-
Applescript/Photoshop save JPEG dialog hangs open
re: OS 10.8.2 / Photoshop CS5.1 I have searched this issue but have not found a resolution. Every post I've found presents "save current document in file filePath as JPEG with options myOptions" as sufficient. When I try it, the dialog just hangs ope
-
Need to record from Cell phone to my mac.
Anyone know of a device perhaps from Radio shack that can plug into my cell phone and go into my mac so I can record scratch track VO? I need to hear the Scratch track with an ear piece of my own as it enters my mac.
-
Oracle Linux Distribution on OSX
The new release of Yellow Dog Linux for Apple platform is very promising... The question is: Is there any way that oracle's Linux distibution can be installed on that linux relase, so that it would be possible to run Oracle database on Mac?
-
French DMEE format (customer payment)
Hi, Has anyone done a parametrization around French DMEE format (ETEBAC) for incoming payment (customer) ? I'm looking for a process in order to integrate an incoming file from the bank into SAP with G/L posting and clearing customer's invoice. Would