Pro 4000 and XP 64 Pro

Hi,
I did a search on Pro 4000 x64 on this board, and was disappointed to see that there is no mention of that combination working as I have always been very happy with the Pro 4000, and had intended to use it with the new machine I have running XP 64 Pro.
Can you please advise on the following;
1) Will the Pro 4000 Webcam be supported on Windows X64 Pro? There is no mention of it in SID7824.
2) In the absence of support, which current Webcam is comparable / better?
( 3) and I know this is off topic, but if anyone has any ideas on getting the Remote control to work for the Audigy 4 with the X64 drivers, that would be cool too They is a Driver, but the majority of the associated software does not work with X64 )
Cheers,
.\/.artin

Yeah, but even if he had a Creative product he would still get no help. Which makes me think of a question. You respond to a non Creative user that doesn't need a response, but the people who have a Creative product with a question, you get no response. Why is that?
My unanswered question as of 5 days ago ....
I use Windows x64, and have the Creative Live Pro. I have installed the 64 bit driver multiple times with no luck at the product working. However; when I plug the camera into my USB port my computer recognizes the camera as the Creative Live Pro. When I try to locate the driver it tells me to make sure the driver is compatible with x64. I have the correct driver installed, but for some reason it can't recognize it. In my device manager it is listed as "other device" with a question mark around it. I'm assuming when the driver is installed correctly it would be listed in USB controlled devices. Why isn't the x64 driver working correctly? I have other USB devices that work properly.

Similar Messages

Deployment of Adobe XI Pro Cloud and Adobe XI Pro Non-Cloud

Hello - If you have Acrobat XI Pro Cloud and Acrobat XI Pro Non-Cloud deployed in a large environment where both products were packaged with the Adobe Application packager at separate times, how does one systematically determine or report on which version is which (file version, registry path, exes, product ID, etc). As best I can tell they are literally exactly the same.
Here's the scenario, I am rolling out Adobe XI Pro Cloud globally to many computers, a good portion of our computers already have Adobe XI Pro non-cloud version. Typically I run a report on ProductID, RegistryKey, or FileVersion to isolate the correct product that needs to be deployed. In this case, they report exactly the same. What is the best mechanism to report on to separate the two?
Is there a file\folder\registry key that would exist only for an Adobe XI Pro Cloud-Edition installation?
(Note: most of these systems will also have the Cloud version of Illustrator & Photoshop installed, which needs to remain intact, looking for CC folders doesn’t indicate specifically which Acrobat version they have in that case)
Thank you,
Tony

This may help: http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/troubleshoot.html#software-ta gs
Ben

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes

I would like to use my HP officejet pro 8600 and HP officejet pro 8100 for printing envelopes.

Hi there cv4928,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using and what application will we be printing from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

User Contributed Tips in the Mac Pro Displays and the Mac Pro forum

*The following User Contributed Tips are located in the Mac Pro > Displays and the Mac Pro forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
a brody - Using a second Mac as a display for a first
http://discussions.apple.com/thread.jspa?threadID=1587927
Publish date: July 7, 2008
See also User Tips Library

You can use the two graphics cards, but it's only useful if you have more than two displays. It won't give you higher speed.

Logitech pro 4000 and Ichat

Hi all,
I'm looking to buy a webcam for my brother cause he doesn't know much about computers and i want to communicate with him via Ichat.
For my self i have everything i need, as to my brother, i'm preparing his Ibook G3 600mhz with everything he needs to talk and see me the next time we separate.
He needs now a webcam for his Ichat so i was thinking of buying the Logitech Quickcam Pro 4000 . I heard a lots of good thinks about this webcam..and it's not expensive comparing to the Isight which i have and i think it's the best of all.
What do you think about the Logitec? is there a huge difference beetwen the two?
I know i need the "Ichat usbcam" to make it run with Ichat and i have it already.
Can you tell me more about this?
I'll apreciate your help.
Thanks, Ben.

If you don't want to spend the money for an iSight camera, I think you would be better off getting a cheaper FireWire Web cam like the iBot model.
For video conferencing, FireWire cameras seem to work best with Macs, and USB cameras seem to work best with PCs.

Epson Stylus Pro 4000 and SL

Is anyone successfully printing with an SP 4000 and the 10.5 driver in Snow Leopard? I can work with either Photoshop CS4 or Lightroom 2. Epson suggests using Rosetta as a work around. Does that work with CS4?
Thanks,
Peter
Message was edited by: pcalvin

I am able to print with ICC profiles properly colour calibrated on my Epson 4000 providing I follow a very specific sequence.
My system is 10.6.1 SL, Lightroom 2.5 (starting in 32 bit mode), Epson driver 3.09, USB connected printer
I must do the following in this sequence (if I do not the prints are way too dark)
1. Use lightroom as normal, press print or print one with profile settings as normal
2. In the print driver dialogue go to "Color Management" and choose "OFF"
3. in the print driver dialogue go to "Print Settings" and choose Mode "Automatic"
4. In the print driver dialogue press "Print"
If I do step 3 then 2, then prints are way too dark, it appears to only work in this way for me.
I am very pleased with SL, the performance improvement is impressive.
I have resolved the issue with my Epson and it is not a big brick but it is clunky to print this way and took a lot of trial and error and paper/ink to figure out something that works for me.
Now, if only I could get my eye-1 software to recognise the monitor profile is installed already and I don't need to reprofile every time I start up, I'd be a very happy man.

How can i get my Imac, running OSX 10.6.8 with a 2Ghz Intel Core 2 Duo, how can i get Final Cut Pro 4 and DVD studio pro 2 to run on it?

I just bought an IMAC running OSX 10.6.8 (not sure what flavor that is). The processor is 2Ghz Intel Core 2 Duo (Late 2006). When i run Final Cut Pro 4 on it I get the following error.
                    "Configuration error
                       This software requires certain hardware or software which is missing
                                * AGP graphics Card"
If Final Cut Pro 4 doesn't run on my system, what version of Final Cut can I run on this as I am a filmmaker and really am comfortable with Final Cut Pro.
On the same note I also have DVD studio Pro 2 and that just quits without any message.
Hope any of you can be some help.
Thank you,
Doug

This is my first mac in a long time so i'm not sure about what this mac is as i didn't buy this from apple (ala Amazon). I'm a tad confused about the Intel/PowerPC thing. I do know the software version for sure, but the Intel/PowerPC is very confusing. I just need to find someone who would know about this question. It doesn't say G5 on this computer. Thats my biggest confusion. Help Me...

Final cut pro 7 and final cut pro x

Is it wise to move from final cut pro 7 to final cut pro x for me who is already using fcp7 with no problems?

I think you should at least download the free FCPX trial and try it, for sure. I've edited in FCP since it came out and when I really tried earnestly to learn X, after a week or two, I was really impressed. The reasons are numerous, but one of the big improvements is speed. FCPX is very fast at handling video, all kinds.
If you know FCP7 well, then you will already understand the importance of many aspects that apply to any HD NLE, such as drive speed, sufficient drive space, (external w/fast language, Thunderbolt, USB3 or at least FW800) etc., but also there will be a kind of learning curve to the different way FCPX organizes, maybe more of a learning wall. But it's too much to lay on you in this reply - suffice to say I think you will love X. Especially if you really stop to learn it. It really is nice, and often receives completely unfair criticism.

Adobe Premiere Pro CC and Intel Iris Pro Graphics in Macs

Hey everyone,
Does anyone know if Premiere Pro CC supports GPU acceleration with Intel Iris Pro Graphics from the new Macbook Pros? This video from Intel clearly shows that it's possible for Windows but what about Macs?
http://software.intel.com/en-us/videos/accelerating-video-production-with-opencl-and-intel -iris-graphics
I'm interested because I know OpenCl performance with Iris Pro should be stellar compared to Nvidia 650m and 750m.
Thanks!

Good question. I'm also trying to figure that out. The 15" Macbook Pro has the Intel Iris Pro Graphics | NVIDIA GeForce GT 750M with 2GB. Whereas the 13" has the Intel Iris Graphics 6100. I prefer the smaller size laptop but am concerned about the Gfx.

HT204384 I have a SanDisk Memory Stick PRO Duo and my MacBook Pro will not read it.

I have a San Disk Memory Stick PRO Duo 4GB and my MacBook Pro will not read it. I have also connected the card into a card reader and connected it to the USB port and nothing happens. This is really frustrating. Why wont my computer read my card?

Are both , the printer and the mac in the same network?
You can find the right software and instructions here:
http://welcome.solutions.brother.com/BSC/public/eu/eu_ot/en/model_top/colormfc/m fcj870dw_us_eu_as.html?reg=eu&c=eu_ot&lang=en&prod=mfcj870dw_us_eu_as

How to uninstall Logic Pro 8 and Reinstall Logic Pro 7.2?

For numerous reasons I'd like to uninstall Logic Pro 8 and return to Logic Pro 7, the reasons for which I'd rather not discuss, as I'd like to focus on the reinstallation task.
Apple states that Logic Pro 7 still functions, but this is not entirely correct. Since many instruments were replaced, the complex 50-track songs that I painstakingly mixed on pure LP7 (prior to the upgrade) now sound completely different in LP7 post-LP8 install (as well as LP8 as you can imagine). It seems that the levels are actually different on some of the EXS and other instruments. Yes, Apple says they are richer and better, but I really don't care. I am in the middle of a CD and need to return to the state I was in prior to the upgrade.
Ultimately I'd like to reinstall Logic Pro 7 and/or its content in order to get all of my original instruments back.
Does anyone have a procedure for this? Should I uninstall Logic Pro 8 and then perform a complete reinstall of Logic Pro 7 following Apple's procedure? Or should I simply use Pacifist to replace the content files that were replaced? Will any of my preferences (plug-in settings) be lost during a reinstall? Should the rest of Logic Studio be uninstalled as well?
Thanks so much in advance.
P.S. I'm just looking for a procedure and do not wish to discuss the reasons, which you'll find all over the forums.

Scottilad wrote:
Thank you.
Regarding copying the settings, these should all be in my personal user folder, correct? My plugin settings should all reside here as I understand. Would ANY customized settings reside anywhere OTHER than my user folder? *Yes, everything should live here, but it never hurts to snoop around the other folders just in case.*
I had modified some EXS instrument settings, but did not import new ones.
Where would the personal EXS settings exist - in my user folders or elsewhere? *All exs are stored Library / Application Support / Logic or GarageBand. The audio files for instrument should be stored there as well. You will need to copy and save both the instrument file and the associated audio files*.
If I simply modified an EXS instrument within a song, my understanding is that would be a property of the song itself, correct? *Yes, if you did not save the exs instrument as new instrument, it settings are stored with the song.*
Also,
Which folders am I deleting when I "delete both versions of Logic"? *You can delete ANY and all folders associated with them. Delete them out of the Apps folder, utilities, and Application support*.
And how would I delete the new Logic 8 content - where does it reside? *The Library. Not in front of my mac so sorry I can't be more specific.*
I just spoke to Apple and they recommended an "Erase and Restore" of the entire system, and a reinstall of Logic 7 in order to get me back to where I was - do you agree? *Yes, that is the preferred method but only if you are willing or in a position to start from scratch i.e re-installing all 3rd party apps, hardware drivers ect. Remember to back up all your important files.*
Thanks!

Apple Pro RES and DVD Studio Pro for burning DVDS

I have a FCP file, shot in HD, 5.5 min long, in apple pro res. It needs to be in a format to send to various people to play on a commercial DVD player as well on apple and pc computers. So far I have made a H264, as well as a MPEG 2 on a "-" dvd and both will play only on my mac computer, not on a playstation 3, nor a pc, nor a commercial DVD player. What should I do?

so sorry I sounded curt....must be the heat.
I have zero experience. Someone was helping me compress my final cut pro movie which was apple pro res, then , in compressor we tried H.264, then MPEG 2, using "-", but neither of these would play on anything other than my mac.
I need them to be in a format that I can send to people who may be using a pc, mac or commericial DVD player.
It's very nice of you to reply....

How To Use The Same Library - MacBook Pro's And Windows XP Pro?

Background: I have a fully configured MacBook Pro running OS X 10.8.3. Also, I run Windows XP Pro SP3 using Parallels Desktop. My primary iTunes Library and all content is stored on an external hard disk and the iTunes is "pointed" to that location by setting the iTunes' Preferences' Advanced Settings to the full path where the Library is located. Everything I have inside iTunes works perfect - the size if the Library is over 225GB!
BUT, when I install and use iTunes on my Windows XP Pro operating system (under Parallels), the contents of the Library SEEMS to work okay (while I'm in Windows) but the Windows' iTunes Library location in Preferences' Advance Tab is NOT THE SAME LOCATION AS IS THE MAC's LIBRARY LOCATION! It is not at the same location as my main/primary iTunes Library is "pointed to".
The problem occurs when I close Windows and return to the Mac OS X and then try to use my primary iTunes. All of the contents (and any content) within iTunes no longer work! When I attempt to play ANY song, movie, TV show, music video, audiobook, etc., a message pops up saying in effect "Location of 'x' can't be found, do you want to locate it?" I can then click 'yes' and navigate to the Library file that contains the song's file and it will then play fine, as it should. BUT, ONLY THAT SINGLE SONG WILL WORK - THE REMAINING 225GB STILL DON'T WORK!!!
So, I am forced to go into iTunes' Preferences' Advanced tab and click on "Change Location" then navigate to the proper library file (NOTE, THE LOCATION HAD BEEN CHANGED TO THE LOCATION FOR THE WINDOWS' LIBRARY LOCATION!!!)! Doing this corrects the primary iTunes functionality, but only after being forced to deleting the "iTunes Media Folder", quit iTunes, restart iTunes and Consolidate the Library - a whole bunch of steps and time to get back to "normal"!!!!!
Again, this all happens by going into Windows, opening its iTunes, then THAT triggers the entire scenario I've described above - EVERY TIME!
Thus, I avoid iTunes when I go into Windows, but I should NOT have to avoid using iTunes inside Windows! I hope I have described the problem/issues well enough that someone of you experts can provide a practical solution for me.
A potential remedy I've thought of is: Go into Windows' iTunes then go into its Preferences' Advance tab and change ITS location to be the exact same location as the primary Mac OS X's, click OK, then immediately close that iTunes.
          DOES THIS SOUND LIKE IT WILL WORK - I.e., USING THE EXACT SAME LIBRARY LOCATION FOR BOTH iTUNES?????
          IF THIS WOULD WORK, WHAT ELSE MUST I DO TO EITHER iTUNES OR TO BOTH iTUNES TO USE BOTH iTUNES
          USING THE SAME LIBRARY???
Thank you for any suggested solutions - VERY MUCH!
Larry

Note that sharing a folder between different OS that use different file paths is not recommended as some files can have an absolute path or other OS specific data.
You can click the Choose Folder button if you want to create or use a folder in a different location.<br />
Make sure to select an empty folder (you need to create this folder in advance) and not a folder that already has files as Firefox will use the specified location in this case.
*http://kb.mozillazine.org/Profile_Manager
You can also create a new profile via the command line.
*https://developer.mozilla.org/Command_Line_Options
You can consider to use Sync to sync the two profiles

Trouble with Round trip between Soundtrack Pro 2 and Final Cut Pro 6

I have edited a home movie together. I then have sent the sequence to Color for grading and then after completing the Color changes and Rendering. I sent it back to Final Cut Pro. It starts out working fine but during the transfer process it stops at somewhere between 50% and 60%. It is during the "Importing XML Data" phase. It just sits there and does not change and I have to force quit to get out of it. The exact same thing happens when I try to round trip from Soundtrack Pro 2 back to Final Cut Pro. So I am unable to make use of the changes I make in these programs.
This is a round trip process that I have successfully made many times before. Nothing has changed. I am working in Final Cut Studio 2 with the latest updates on an Intel Mac. Any advice on how to remedy this situation would be greatly appreciated.
Thank you in advance.

Thanks.
What's I've been doing is exporting the Soundtrack files as AIFF files, then importing them into Final Cut...
It's working... at least well enough. Still seems harder then just being able to go back and forth between the two applications.
Thanks for the advice.

Snapz Pro X and Final Cut Pro

I'm screen capturing QuickTime movies of usage of a website via a web browser to include in a video production. I'm using Ambrosia's Snapz Pro X to do the video capture. I've sized the browser to 720x480 for the capture. I'm exporting the capture using the animation codec (which looks much better than a DV stream), but it comes in at 8 frames per second, which doesn't mesh with my timeline (at 29.97 fps).
Is Snapz Pro X a good solution to do this, or is there a better program to do this? If Snapz Pro X is a good choice for this, what settings should I change in the program to get the best video for use in Final Cut?

AFAIK Snapz records the screen activity into RAM as OS-level screen calls and then renders the file to your drive with whatever CODEC you choose when you save the clip. So the choice of CODEC won't affect the frame rate, but the size of the capture frame will.
The Animation CODEC is the best choice as it retains the full fidelity of the screen grab (no loss of quality). The main thing to remember when configuring the Animation CODEC is to set the keyframe rate to 1 (every frame is a keyframe). Final Cut does a bad job of handling key frames in the Animation CODEC when making cuts edits between keys - you'll get weird artifacts.
This makes for big files and Final Cut will want to conform the clips to 29.97 (or whatever timebase your using) so it will need to render the clips before you can edit them. Make sure your timeline is set to the same frame size, CODEC and KEY FRAME rate as the clips coming in.
Once you've done your cuts and are happy with your edit, output directly to whatever delivery CODEC your going to use: MPEG2 if DVD, Flash, H-264 etc for web. Avoid rendering to DV as the DV CODEC slaughters text and hard edged objects.
My two cents worth.
Chris

Pro 4000 and XP 64 Pro

Similar Messages

Maybe you are looking for