Pro 7 Won't Keep PPTX Audio

I need to put a bunch of PowerPoint presentations (with audio) up on YouTube.  When I Save As .mov and then open in QuickTIme Pro 7 it doesn't have any audio. It does however keep the audio icon on the first image which I don't need. I'm using the PPT that came with Office 11 for Mac. (And sometimes the version that came with 08). After watching a fairly convincing tutorial online this seemed like this should work but can anybody tell me if I'm barking up the wrong tree?  Any advice much appreciated.

I would suggest just make sure it isn't something obvious, like the input to the audio track isn't assigned correctly.
And don't forget to arm one track, and then while holding down the shift key, arm the other. That's the way it always worked... arming an audio AND a MIDI track simultaneously.
Just in case you overlooked either of these things...

Similar Messages

  • My macbook pro won't keep a disk in. How can I fix?

    Please Help

    Read this Apple Support link on Optical Drives:
    support.apple.com/kb/HT2801http://
    Many time the lens is dirty.  A shot of compressed may clean it or the use of a lens cleaning DVD may rectify the problem.
    Ciao.

  • Keeping high audio quality, despite Pr Pro Audio Conforming

    I'm working on a film project, which will be edited in Premiere Pro.  I am recording most of the audio at 24/96 .wav files.  There will however be some audio files recorded at 16/48 compressed, coming from different sources.  This is unfortunately unavoidable.  SO, upon digging in the Adobe help sections, I found that if I start my project and set the sequence settings for audio to a sample rate of 96 (or 96,000), Prem Pro WILL NOT CONFORM my 24/96 .wav files.  (Pr Pro will not conform uncompressed audio of a supported format if it is brought into a sequnce where the sample rate of the sequence is the same as the clip.) This is great.  My 24/96 files will hold their quality all the way through the process.  It will however conform the other files such as the 16/48 compressed files.
    So here's my question.  (Keep in mind that my final product will be exported to 24/96.) I can take all my 16/48 audio files and convert them to uncompressed 24/96 before bringing into Prem Pro and then Prem Pro won't conform them at all.  So what will yield the best audio quality - a 16/48 audio file that has been conformed by Prem Pro and then during the export done by Prem Pro converted to 24/96, or will the audio quality be higher if I convert that 16/48 audio file first to 24/96 and then bring it into Prem Pro, where it won't be conformed by Prem Pro at all?  In other words, for best audio quality, do I let Prem Pro conform my 16/48 files and then convert them to 24/96 during export, or do I do the 16/48 converstion to 24/96 in another program like Audition?
    (((And yes, the higher audio quality matters.)))
    Thank you

    matt_gh2 wrote:
    I'm working on a film project, which will be edited in Premiere Pro.  I am recording most of the audio at 24/96 .wav files.  There will however be some audio files recorded at 16/48 compressed,
    Thank you
    If these files are .wav files then they aren't compressed just a lower sample rate and bit depth. There shouldn't be any difference in quality between the Premiere up converted or the Audition up converted files, although I would trust Audition a bit more than Premiere to do an accurate conversion.
    Not really sure why you need to work at 96K, it just uses more resources but it is worth keeping the sored files as at least 24bit. Since Audition works at 32bit floating point bit depth as it's native format it may be that your saved files from Audition are 32bit and that is what Premiere is choking on.

  • My Premiere Pro won't open and keeps coming up with a 0xc000007b error message!! I have uninstalled

    My Premiere Pro won't open and keeps coming up with a 0xc000007b error message!! I have uninstalled and reinstalled it but it will still not open.

    It worked for me, any way we have to do following things now, I have seen this happens becasue of the corrupt dll for Visual C++ packages. if the following thing will not work, I am affraid we have to reinstall the windows 7
    Good Luck
    Try to remove all the Visual C++ 2010 Redistributable and Visual C++ 2008 Redistributable Packages (both x86 and x64) from the Control Panel
    Download and install following Visual C++  Redistributable Packages
    Microsoft Visual C++ 2008 SP1 Redistributable Package (x86)
    Microsoft Visual C++ 2008 SP1 Redistributable Package (x64)
    Microsoft Visual C++ 2010 SP1 Redistributable Package (x86)
    Microsoft Visual C++ 2010 SP1 Redistributable Package (x64)

  • Macbook Pro won't start properly... keeps restarting without chime!

    Macbook Pro won't start properly... keeps restarting without chime!
    Late 2007 Macbook pro.  OS upgrade worked great for me.
    I have had this problem on and off for a month or so.  I simply cannot figure out what the issue is.  I have tried poerup with and without AC power and with/without battery installed.
    Starting in Safe mode does not help.
    Trying to start with a disk does not help.
    It sort of seems like it might be an internal power issue or GPU issue.
    It also feels sort of like a software compatibility issue since my Macbook Pro gets reallly slugish for no apparent reason sometimes and IU have to restart.
    I have three different anti-virus programs so I doubt it is a virus issue.
    I noticed all this start after I did a Mountain Lion upgrade and then tried to start up VMware Fusion.  Fusion seemed to just bog down the computer horribly but did not cause a system crash.
    I need to edit an important sequence on Final Cut Pro and don't want it to freeze me out!
    Anyone who has had this problem and resolved it please let me know 
    God bless 

    Systematically run through this list of fixes.
    ..Step by Step to fix your Mac
    If it doesnt chine it doesn't mean much, the mute could be on or you installed a anti-chime software.

  • MB Pro Won't Start Up, Strange Light From Audio Jack

    Greetings Apple-users,
    so my macbook pro won't start up. i was using garageband, and i think i may have overpowered my audio input jack, which might have been the cause of the kernel panic that happened. the grey sheet came over instructing me to shut the computer down, which i did.
    i attempted to turn it back on, but now all i get in a popping sound instead of the startup chime, the sleep light is on (slightly maybe?) and a red light is emitting from my headphones jack. very strange. I've tried all the usual fixes, and to no avail. the guy on the phone from apple told me i should send it in for repair, but i'm in germany and not in a big rush to do that.
    i'm just curious to what any of you might think is going on. from looking around, i know now the light has to do with the optical audio switch, but no playing around with a toothpick could get it to turn off (wasn't sure where the switch was, but nonetheless,,,). I haven't been able to boot up to the disk or anything.
    also, if this means anything. when i plug in my external speakers i hear what sounds to me like a light phaser effect, like possibly out of garageband. a strange hiss. and when i plug in my amp to the input through its speaker output, i can hear it through my speakers.
    it's all very strange, but i can't help but think that this isn't a hard drive failure or even the logic board. maybe just a short or something in the jack?
    any ideas or suggestions you have would be great.
    thanks,luke

    The SAME thing happened to me this morning when i booted up....There was a reddish light coming from the side of the computer where the jack is. However, I have a powerbook so i am not sure what this is.
    PB G4 1.67 15"   Mac OS X (10.4.8)  

  • Premiere pro won't display or play audio on Mac os 10.9

    premiere pro won't display or play audio on Mac os 10.9; we are uploading AVCHD mts file format video clips from a Canon camcorder. we get message : "Dolby Audio licensing decode restriction."

    next link says After Effects, but check YOUR permissions !!!
    -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
    -Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -and https://forums.adobe.com/thread/1507936

  • HT201177 My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on besides the cursor. what should I do? Thanks.

    My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

    My Mac book pro won't re-start. The apple sign stays on for a while, that little circle keeps spinning and nothing happens. After 10 minutes rebooting  the screen turned blue and nothing was on. now I just re-tried and lots of pixels came up. what should I do? Thanks anyone.

  • Installed Yosemite...now my MacBook pro won't start up. Keep showing "Kernel Panic!" HELP!

    installed Yosemite and now my MacBook pro won't start up. Keeps showing "kernel panic"
    PLEASE HELP ME!

    If you can't start up and log in in the usual way, try in safe mode.
    During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
    ☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    Safe mode is slower than normal, and some things won’t work at all.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
    If you're able to log in, launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.

  • HT1338 My Mac Pro won't stay in sleep mode.  keeps waking itself up. Anyone else have this problem?

    My Mac Pro won't stay in sleep mode.  keeps waking itself up. Anyone Suggestions to solve this problem?

    If you can't solve this through other means, get PleaseSleep.
    http://www.dragonone.com/products/macosx/pleasesleep/

  • It won't let me upgrade my account from Standard to Pro. It keeps directing me back here. How do I either upgrade or cancel my current account?

    It won't let me upgrade my account from Standard to Pro. It keeps directing me back here. How do I either upgrade or cancel my current account?

    Hi er1nnosullivan,
    In case you face any issues placing your order please contact our chat support at: http://helpx.adobe.com/x-productkb/global/service-b.html
    Regards,
    Rave

  • I have a new MacBook Pro.  I keep getting the message (from all different programs) that they would like to access the keychain "login".  I have run keychain repair, and it won't stop!

    I have a new MacBook Pro.  I keep getting the message "Mail would like to use your keychain "login".  How can I make this stop?  I have run the keychain repair utility.

    Hi,
    With the Finder as the Front app go to the Go Menu > GO to Folder.
    Copy and Paste the bold text below into the text field
    ~/Library/Keychains
    Highlight the Keychain.
    Use the CMD + i Keys together (Keystrokes for Get Info from the File Menu)
    In the Info Panel that appears check the Ownership and Permission bit at the bottom.
    Example Pic
    Unlock Padlock
    Check your Shortmname Appears (the (Me) one).
    Open the Cogwheel icon
    If it is Greyed Out to "Make "Shortname (Me)" owner then you are the Owner.
    Check you have Read and Write Permissions.
    You may need to check the Ownership and Permission on the ~/Library itself (you can do the same Get Info on Folders as well as Files)
    If you don't Own it then, when you have changed that also Apply to Contents.
    10:12 PM      Tuesday; August 23, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • MacBook pro won't boot up Keeps turning off

    MacBook pro won't boot up.  When power button pressed the white screen w apple comes on w progress bar but shuts off before bar completed. If I move cursor or hit buttons it boots but will turn off if cursor stops Moving or stop pushing buttons.  Just started happening.   Ran hardware test and all shows ok.  Any ideas??

    Thanks for all the help; however, I still continue to have problems booting off of any other media.
    I've tried the Apple CD w/ no success - I made an image of the apple cd and restored it to a USB drive, and it won't boot. I've tested both methods on another mac, and both options boot fine.
    I'm going with my last restort here and am going to install OSX on a portable USB HD, and try to boot off of that (no clue if it will work given the outcomes of the other things I have tried). From there I'm going to backup the HD, and try DW as suggested.
    Any thoughts as to why the mac refuses to boot off of any other media? It always boots halfway and then tells me I need to shutdown my mac.
    Thanks again,

  • MacBook Pro won't read audio cds

    My MacBook Pro will not read digital audio cds.
    It has in the past, but now it seems to have stopped reading them.
    I have several purchased cds I would like to get on itunes, but I can't get it to recognize the discs.
    I can hear it spinning several times, like it is trying to access the disc, then it ejects it without mounting.
    It does not appear in iTunes, or anywhere on the desktop.
    It will read and burn blank cds and dvds.
    I havde a 17" MacBook Pro, 2009, with a MATSHITA DVD-R   UJ-868 drive.
    Anyone have any ideas how to get it to work again or what the problem could be?

    yes it could but probably not after testing ten different CDs right? Got the very same scenarion and asked the question again here, pls see https://discussions.apple.com/message/22423010#22423010

  • XP Pro. SP3 keeps telling me about HD Audio Controller that is disabled in CMOS!

    Hello.
    I just got my new MSI P43 Neo3-F motherboard, MSI Radeon 4870 512 MB video card, etc. yesterday. My friend and I are puzzled why Windows XP Pro. SP3 keeps asking for the driver at bootup/login. We even tried the latest BIOS (successful upgrade via a bootable 3.5" DOS disk), and that did not fix it.
    Does anyone know what's up? Is there another CMOS setting(s) we missed to completely disable it? I want to use my Creative Audigy 2 ZS soundcard.
    Thank you in advance.

    Quote from: nightmare99 on 28-December-08, 21:31:33
    Its thier method of getting digital sound output through HDMI without requiring extra cabling from the m/b or sound card to the VGA card.
    Ah and thanks. Useless for me now since I still use a 15 years old or so CRT TV and don't use HDMI. Once my TV dies or goes bad, I will get a HDTV.

Maybe you are looking for

  • Header Vendor text is not getting displayed for PO in BBP_PD transaction.

    Hi Experts, We are upgrading   SRM 3.0 to SRM 7.0 .In the upgraded  sys the Header Text 'HTXT' is not getting displayed for the Purchase order created in BBP_PD. For the SCs  the Header text field is populated correctly. Inputs on this will be very h

  • Iweb password protect question

    I was wondering if it was possible to add a password to my photo gallery to prevent random vistors from downloading or uploading pictures to my web gallery.

  • Exchange Server 2010 DAG requirement

    Hi i am configuring Exchange server 2010 with DAG. i read that Enterprise level OS must have needed for MS-Exchange DAG but i have 4 Windows Server 2012 standard. can i configure my DAG setup on it? It will be like 4 hyperv DAG Node 1 – Windows Serve

  • Parallels Desktop, Boot camp or something else

    I am wanting to run Windows on my MacBook Pro - but didn't know what route to go. Has anyone tried Parallels, Fusion, boot camp, etc - What are the pros/cons of them. I am currently running Tiger on mine. And just to make sure...I do have to my Windo

  • Network Fails, Connected but no transfer possible

    Well, my T400 is making troubles again. it says that its connected to the WLAN, also tried using ethernet-conection. As soon as i want to open a website in ANY browser, it doesnt do anything. I need your help... again Edit: Skype works though...