Pro*C linker problems

System is Linux Mandrake 6.0 with Oracle 8i, with the 8i patch
applied.
What a nightmare that install was! Lots of permission problems,
unreadable directories, programs with no execute permission on
them and so on.
I now have a database up and running, and am trying to get Pro*C
working. The code was written on RedHat 5.2 with Oracle 8.0.5,
and worked fine there, so I know it is not a fundamental code
problem!
I have patched the pcscfg.cfg file as detailed in the patch FAQ
(with modifications for the slightly different paths under
Mandrake Linux).
When I compile the Pro*c file, I get many "undefined reference
to 'dbcon'" and "undefined reference to 'ctx'" errors from the
linker. This occurs whether I use a pre-defined list of specific
libraries in my own Makefile, or if I use the standard
demo_proc.mk makefile. I have used nm(1) on every place I can
think of, to try to find the required library/object, but to no
avail.
I appreciate that Oracle have so far only certified Oracle for
Linux against Redhat 6.0, but surely Mandrake can't be THAT
different ;-)
Does anybody have any ideas, known problems etc? I REALLY HOPE
that I don't have to switch to Redhat as the only solution - no
problem with Redhat, it would just require a tedious and
complicated system rebuild, which I don't have the time to do :-(
TIA
Mike Holden
null

Robert B gin (self) (guest) wrote:
: Robert B gin (guest) wrote:
: : Since I've last posted, I've installed RedHat 5.2 and
ditched
: : Slackware!
: : (btw, what a breeze - Hat's off to RH! very nice install!).
: : I've then installed oracle, have managed to setup
tnsnames.ora
: : so I can connect via sqlplus to my remote database (on
: VAX/VMS).
: : But now I have Pro*C linker problems with:
: : make -f demo_proc.mk build OBJS=test.o exe=test
: : (blah,blah,blah)
: : /usr/lib/crt1.o(.text+0x36): undefined reference to `main'
: : make: *** [build] Error 1
: : Does anybody out there have a similar problem?
: : Rob
: Duh! forget it... (EXE has to be caps... RTFM)
: (cryptic error message though?)
: works great!!!
Could you please tell me where I can get demo_proc.mk file
for Linux (RedHat)?
Thanks
null

Similar Messages

I have just subscribed for a monthly billing for my acorbat pro XI, the problem is i have clicked on the link on the email that have sent me to activate it but its still not allowing me to acess this and see my PDF's

i have just subscribed for a monthly billing for my acrobat pro XI, the problem is i have clicked on the link on the email that have sent me to activate it but its still not allowing me to acess this and see my PDF's, how to i activate my new license?

Can you explain the problem in more detail - "not allowing me to access" isn't clear to me. If you get any errors, please give the full wording. If you just don't seem to have any useful functions under TOOLS, make sure you are NOT still running Adobe Reader.

Acrobat Pro 9 Link Tool

Hi,
I am using the link tool in Acrobat Pro to link certain parts of a pdf document and then have the pdf accessed from a web browser
The links work fine on the browser, but it want the linked document to open in a new browser window. (ie: target=_blank)
It is currently opening it up in the same browser
Any ideas how to achieve this ?
Thanks
Geoff

Thanks for your suggestion. I've worked with one file at a time. So this is not an exactly answer. I'm afraid it's not possible to find a right solution: my problem has disappeared after another restart... So I'm confused now once more time. Maybe I should reinstall Acrobat - I've got upgraded version. But on the other hand: this software have worked fine for a couple of months.
Conlusion: the problem is magically resolved and normal solution remains unkown. I'm curious about it.
Greetings
Marcin

Telstra Palm Treo Pro & Whereis Navigator problem

Hi, hoping this might save some time for other Telstra users subscribing to Whereis Navigator to take advantage of the GPS capability of the Palm Treo Pro.
The problem: when trying to open Whereis Navigator there was intermittant account (you subscribe to Telstra for this service) authorisation problems. The error message was along the lines (can't recall verbatim), "can't verify account authorisation, please try again later".The solution: On treo, open internet explorer, go to wap.telstra.comthen to 'my account', then 'Locational preferences', then 'my location settings', then tick 'allow me to be located' and 'allow a GPS location'. After this was done, no more problems.
Post relates to: Treo Pro (Telstra)
Message Edited by englundm on 10-22-2008 03:27 AM

Further update on above posts from problems during WhereisNavigator critical updates.
This from garmin/Telstra;
"Please have the customer try the following: ·
Open Internet Explorer on their device.·
Go to settings and clear the browser cache (not having the device in front of me at the moment, I can’t give more specific directions)·         Re-start Whereis Navigator and click View Details·
Click the download link If this still fails, a secondary solution is to have the customer enter the following URL directly in to their browser: http://offboardnav.whereis.com This will take them to the same download site, but will remove the extra step of opening the application. "
Once I cleared the browser cache, the critical update install from the 'view details' prompt of the update within WhereisNavigator worked fine. Note on this occasion it didn't work (as it has with previous critical update istall problems) to navigate to the URL  http://offboardnav.whereis.com and install directly.

YouTube login & linking problems - one possible solution

Rather than add this comment to one of the several topics concerning YouTube login and account linking problems, I'm starting this topic to isolate this particular problem and the solution that worked for me.
* SKIP TO LAST LINE FOR MY SOLUTION ->
The problem I experienced surfaced when I first tried to upload a video to YouTube from my iPhone 4. YouTube would no longer accept my YouTube password. My YouTube account was linked to my gmail.com account. Having read some of the suggestions in other threads, I unlinked the two accounts, but that did not help matters.
I signed out of the YouTube app in order to sign back in, as suggested elsewhere, but then I could no longer sign in to the YouTube app.
So I tried shutting down my iPhone and starting it up again, as was also suggested elsewhere. That didn't help.
So, exasperated, I went to the YouTube site and tried to change my YouTube account password to itself - and therein lay the solution! YouTube told me the password has to be 5 to 20 characters long and my (old) password was only 4 (because I had created my YouTube account long ago before they had that requirement.)
Once I set a new password that was long enough to satisfy this requirement, I was able to login to the YouTube app just fine and everything is working.
* The solution -> MAKE SURE YOUR YouTube PASSWORD IS LONGER THAN 4 CHARACTERS
Message was edited by: caf
Message was edited by: caf

No, it didn't work. After buying my MacBook Pro I updated everything including QT. As a result QT 7.2 simply didn't play any of my divx avi files. Before adopting the rude way, I obviously tried to update/replace all of the components including: Perian, DivX, Flip4mac. No way. I then forced a downgrade to ver. 7.1.6 using Pacifist (a package manager) and as a result I put the hole system in danger. It was in a total state of malfunction. I had to restore the system with the cd. Fortunately it kept my home! But I now run ver 7.1.6 and I do NOT have any intention to update it. I use Pro so I don't have any necessity of full screen support or else. Maybe if Apple will release a stable version I will consider the update. But for now, "nowing it is not installing it".

"Link Problem" in Incident Form does not seem to work right? How do I do it correctly?

1. The Link Problem tool in the task pane on our Incidents, do not seem to actually link the Incident to the Problem.
2. I can link the two by going to the Problem and adding it on the related items tab, but this is very time consuming in a call center environment, especially during an outage where we are relying a lot more on Problem and root cause analysis.
3. I have tried creating the incident and applying, then doing the Link Problem tool and selecting the problem, then applying again and selecting OK to close the incident. Again it doesn't work for me.
What am I doing wrong, number one?
Can we do this without manually opening the problem for every incident and attaching from there?
3. Can I build an incident template that will automate the Attachment to the problem at creation? (Tried this today to and it wouldn't work, but then again, the Link Problem might again be the culprit) This would be great for real time saving during
an outage. Once outage is found, I could create the template with all the necessary items filled out, and would like to have it automatically attach to the specific problem I choose at template creation, and that way analysts can simply apply template, and
click OK when they get a call related to the outage.

Thanks for the response Thomas!
The functionality seems to work just fine. I use the LINK PROBLEM and it pops up the problem search box, I search for and select a Problem, I then select it and click ok, and I get no error saying the relationship was not created.
The problem is, when I open the problem after that, there is never any relationship showing in related items there, as it says there should be.
Also, to point out, I am talking about newly created Incidents. I tried even using APPLY prior to doing the LINK PROBLEM but it still did not work. I suspect it may be a workflow problem, where the workflow to create the incident has not completed, there
for the relationship is not completed.... and I get no error.
In my work environment, we have analysts during outages taking a call every 30 seconds, and I need a more efficient way for this system to work. As of now, they spend 1-2 minutes doing the ticket, and that is too long.
I have decided to try a newb way, where I created an Incident (GENERIC OUTAGE) that folks can use, and every 15-30 minutes during an outage, I can open the problem and search for open incidents with that title, and attach all that I find from the problem
side. This is assuming that once attached they will not show up in the search to attach the next time lol. Also this assumes that if attached from the problem, they will auto resolve when the problem is resolved.
I am rusty on my programming, and am currently trying to get refreshed. I am sure that would come in handy for this :)
Oh and lastly, one additional tidbit that will make this clearer, with regard to work flow, we re also running our Service Manager in our help desk, virtualized, as they have not upgraded to Win 7 yet :(. So that compiles my time to add ticket issue :(.

InDesign to Adobe Acrobat to Adobe Reader Link problem

Hi - I'm responsible for a long conversation about link problems in creating file links in InDesign that did not work in Acrobat. At the end of that long discussion, I thought I solved the problem, but didn't. Since then, I've been MUCH more observant.
The problem appears to take place in Adobe Reader.
My home computer on Win7 is different than my work Computer (XP), but I have the same software on both.
At work, I discovered that when I clicked on a PDF, it worked fine, that its links opened a new PDF window, but when I clicked on links on the second document, the links failed and Microsoft returned an error message telling me that I was screwed. Because I was screwed, I couldn't see what was in the path of that error.
It turns out that for some unknown reason (which you might clarify for me), my Adobe Readers are attempting to open my documents in Internet Explorer and that just won't work.
What I observed at home is that I made 5 test documents in ID, and ported them to Acrobat. As it turns out, my default for opening PDFs is Adobe Reader, which I saw on the chrome of the first document I opened. When I clicked a link, and I got the error message, I noticed my browser was up.
When I set my default for opening in Acrobat, everything worked like a charm! How about that!
Now then, what that says to me is that Adobe Reader is to be used exclusively with a browser, so if the people who are going to read your internal PDF files with Reader without those files being on a web server of some type, you are totally screwed. The only way you can use Reader is if you click on the file and bring it up directly. Don't rely on linking to other documents.
I mean, that is what it seems to me.
Now, I am creating a big project for an environment without a webserver and obviously my sense of panic is palpable. That said, I believe that all my users can read my files using Acrobat (to be tested tomorrow), which I hope means I can breathe a bit easier.
Do any of you have any thoughts on this subject? If you are really curious, I can make a packet of test files available.

Karen_Little wrote:
The files and the PDFs are all in the same directory.
The tests are on local drives. All indesign files and their related PDFs were in the same directory.
The same for Word and its related PDFs. Note that the PDFs created by Word then read by Adobe Reader worked correctly. They all opened in Adobe Reader.
If the default program for opening PDFs is Acrobat, everything works correctly, with the added benefit of everything opening in a different window, which is what I want (yet to be tested at work). If the default program is Adobe Reader, the second generation of links do NOT work because Reader opens in Internet Explorer.
When I open a Word-created PDF with Acrobat, view the link, and click to the Actions menu, the action is "Open a file"
When I open an InDesign PDF with Acrobat and do the same, the action says "Open a web link"
Big BIG BIG bug.
Are you seeing the link commands by editing them in Acrobat? If not, try, so you can see the exact command and file or URL instruction. It still may be a bug, but you'll have better evidence when you report it here:
Adobe - Feature Request/Bug Report Form
And, you might want to try correcting a link command in Acrobat, to see if can work for both Acrobat and Reader.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Titanium Fatal1ty Pro SPDIF game problem

(Titanium Fatalty Pro SPDIF game problem hi all,
sorry if this issue reported in the past i but i could not get any answer on any relati've posts, the terminology was so complicated
i buy?a new pc with a Titanium Fatalty Pro sound card, i use Vista sp2 x64, the sound card is connected to my external amplifier with SPDIF out in order to get surround sound for my movies and my games and here is my problem
any movies format with surround sound play perfect with out any problem any kind of movie DVD, dvix, mkv?files?etc
but non of the games i play?use the surround system, why is that? is any?kind of special settings needed to be done? how is possible to get surround to movies and not to the games?
thanks you all for your time ?

,Re: Titanium Fatalty Pro SPDIF game problem? this is really coincidence - I just posted on the very same topic 5 minutes ago.
for games just go to the Console Entertainment mode > Encoder > Dolby Digital. Although this is not documented I believe what happens is that the sound card encodes the 6 digital channels onto Dolby Digital mode and transfers this over SPDIF. Kok-Choy actually recommend using the standard analogue cables (and he has a point as you are actually upcoding an existing game signal onto Dolby so that your digital receiver can then decode this down to 6 channels - seems a pretty useless overhead)
for video - I am curious to know what you do - I can either get 96/24 bits on the display of my z5500 with a direct signal but the z5500 receiver then tells me that this signal is only in dolby ProLogic II (and not DD or DTS). As alternati've I use again the encoder and have to select for EACH FILM WHAT IS BEST DOLBY DIGITAL OR DTS. Pls explain what settings you use.
thanks

Re: Fwd: Link Problems With Borland C++ 4.52

I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystal problem.
Many Windows based applications rely on PASCAL calling conventions, which
change the way parameters are handled in function/method calls. They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms for changing
the calling conventions of the prototypes in the generated C++ wrapper
library, so when you compile that code, the linker fails. I think that the
compiler may generate different symbols depending on calling conventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate the distribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI to the appropriate
places in the prototype definitions (see above) and use fcompile to build
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
>
We are trying to wrapper Crystal Reports from Forte. I know that there
are a number of other people in this same boat, as I've seen messages
posted here at various points during the past few weeks. We are having
a particular problem with getting the compile to go through, which we
have sent in to Forte Tech Support. I'm forwarding the message I sent
Tech Support to this group in the hopes that someone here may have
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / Alaiah Chandrashekar]
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to Crystal
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after a day
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message for each
of the functions we are trying to wrapper. We have tried a number of
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someone call
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092

James,
Thanks for your quick response. Yesterday we had been running down
the path of examining the calling conventions and trying to change them
to PASCAL, but without much success. After receiving your note, we
went back over it again, and this time we were able to finally to piece it
together. In addition to editing the Forte-generated .cc file to declare
the functions as PASCAL, we also had to turn off the compiler's case
sensitivity. (The Crystal .lib file had the function names in mixed case,
but the Borland compiler was generating all uppercase for the names.)
Now I had actually tried this yesterday and it didn't work (in fact it
generated a whole bunch of new errors) - because until we took a
second look at it today, I didn't realize that Borland's linker actually has
TWO flags that control case sensitivity. If you only turn one or the
other off, things can get pretty ugly looking. As soon as we turned
both of them off, the compile and link went beautifully. Again, thanks
for your help; hopefully we are over the worst of it now!
Dale
I have seen this problem before in another context, and I'll offer the
cause and solution in the hope that they will apply to the Crystalproblem.
>
Many Windows based applications rely on PASCAL callingconventions, which
change the way parameters are handled in function/method calls.They
indicate this by placing one of the following immediately before the
function name in the prototype declarations:
- pascal_far (or something like that)
- WINAPI
- some other typedef of either of the above
For example:
int WINAPI AddTotal(int valueA, int valueB);
Unfortunately, v2.0 of Forte does not provide any mechanisms forchanging
the calling conventions of the prototypes in the generated C++wrapper
library, so when you compile that code, the linker fails. I think thatthe
compiler may generate different symbols depending on callingconventions,
so that's why it fails.
To fix this, don't autocompile your code, but generate thedistribution, go
into the generated C++ files and look for the function prototypes (I think
you can search for FORTE_NO_PROTOTYPES), add WINAPI tothe appropriate
places in the prototype definitions (see above) and use fcompile tobuild
the library. Instructions for fcompile are in the Interfacing With
External Systems manual.
Hope this helps,
James
At 11:05 AM 5/29/97 PDT, you wrote:
We are trying to wrapper Crystal Reports from Forte. I know that
there
are a number of other people in this same boat, as I've seenmessages
posted here at various points during the past few weeks. We arehaving
a particular problem with getting the compile to go through, whichwe
have sent in to Forte Tech Support. I'm forwarding the message Isent
Tech Support to this group in the hopes that someone here mayhave
already seen and resolved a similar problem.
Thanks in advance for any help you can offer!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc.
[email protected]
>
>>
Date: Wed, 28 May 97 13:47:20 PDT
From: dg7077a
To: Forte Technical Support
Cc: Gardner, Steve
Subject: Link Problems With Borland C++ 4.52
Name of requestor: [Dale V. Georg / AlaiahChandrashekar
Company: [Indus Consultancy Services]
Phone for callback: [(610) 709-3956]
Customer Site: [Mack Trucks, Inc.]
Product: [Forte]
Version of Forte: [2.0.H.1]
Server OS: [SunOS 5.5.1]
Client OS: [Windows 3.1]
DBMS: [Oracle 7.2.3]
Reproducible?: [Yes]
Brief description: [Link Problems With Borland C++ 4.52]
Complete description of problem or question:
We are attempting to write a C-wrapper interface from Forte to
Crystal
>>
Reports' Report Engine. We are using Borland C++ version 4.52.
Unfortunately, we have been unable to get a clean compile after aday
and half of effort. We get as far as the link stage of the
compilation, and
the compiler aborts with an "Unknown symbol" error message foreach
of the functions we are trying to wrapper. We have tried a numberof
ideas to fix this problem, and are continuing to try to solve it on
our own,
but any help would be greatly appreciated. Please have someonecall
Alaiah Chandrashekar at the number above as soon as possible.
Thanks!
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, [email protected]
James Urquhart [email protected]
Product Manager phone: (510) 986-3513
Forte Software, Inc. fax: (510) 869-2092-----------------------------------------------------------------------------------
Dale V. Georg
Indus Consultancy Services [email protected]
Mack Trucks, Inc. [email protected]
[email protected]------------------

Premier pro play back screen goes black a freezes every 15 minute . This is my second mac pro with identical problems.

Premier pro play back screen goes black a freezes every 15 minute . This is my second mac pro with identical problems.

SOLVED!!!!!
SO I did some more digging around and read ATI cards seem to overheat easily. I knew the fan was working, but after closer inspection I realised there was ALOT of built up dust on the card and clogging the fan and airflow. Blew it out with alot of compressed air, stuck it back in the Mac and BAM...no black screens. I tested it by streaming 6 video sources...doing 2 screen captures at once as well as watching a HD movie in fullscreen. Did all this for 30 minutes and no crashes. I also downloaded an app to monitor the temps inside the computer and the expansion bay stays at 41 degrees. No clue what it was before but obviously it was hotter than that. So my problem is solved! Funny that 10.7.5 made the card work harder. I wonder if its off loading some CPU stuff to the GPU for processing more than 10.7.4 so its just working a bit harder and so it heats up faster....

Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
i set the printer to correct icc profile
print out comes out same with glazed colors and missing tones/colors
however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
can you please assist and thanks

I've a Pro9000 and also use Colormunki successfully.
When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

Oracle 9.2.0.1.0 installation link problems.....HELP !!!!!!

Hi All
During installation of Oracle 9.2.0.1.0 on Linux, I received the following error:
Error:
Error in invoking target install of makefile
/opt/oracle/product/9.2.0.1.0/network/lib/ins_oemagent.mk
I did some research and found that it is executing the "relink" script. So I tried to debug it it. Here is the output:
[oracle@redash oracle]$ cd /opt/oracle/product/9.2.0.1.0/bin/
[oracle@redash bin]$ relink oemagent
chmod 755 /opt/oracle/product/9.2.0.1.0/bin
if [ linux = aix ]; then \
gcc -L/opt/oracle/product/9.2.0.1.0/lib/ -L/opt/oracle/product/9.2.0.1.0/rdbms/lib -L/opt/oracle/product/9.2.0.1.0/network/lib -L/opt/oracle/product/9.2.0.1.0/lib/ -L/opt/oracle/product/9.2.0.1.0/rdbms/lib -L/opt/oracle/product/9.2.0.1.0/network/lib -o dbsnmp /opt/oracle/product/9.2.0.1.0/network/lib/s0nmi.o -lvppdc /opt/oracle/product/9.2.0.1.0/network/lib/libvps.a \
/opt/oracle/product/9.2.0.1.0/network/lib/libnmi.a \
/opt/oracle/product/9.2.0.1.0/network/lib/libnmd.a /opt/oracle/product/9.2.0.1.0/network/lib/libnms.a /opt/oracle/product/9.2.0.1.0/network/lib/libnmt.a /opt/oracle/product/9.2.0.1.0/network/lib/libnml.a \
/opt/oracle/product/9.2.0.1.0/network/lib/libnmi.a /opt/oracle/product/9.2.0.1.0/net[i]Long postings are being truncated to ~1 kB at this time.

Before installing Oracle 9.2 on linux (i'm using redhat 7.2), there are some steps you have to issue.
Those link problems are related to the wrong version of binutils, you need binutils-2.10.0.18-1.i386.rpm
You need also JDK,to set some kernel parameters and so on..
However follow the steps of this link http://www.puschitz.com/OracleOnLinux.shtml
For me it worked.
Hope this helps
Tarek

OCCI Link Problem

Hi,
I am using Oracle 9.2.0.1.0, Redhat 9, gcc 2.96, glibc 2.3.2-11.9. I continually receive the following link problem:
/usr/bin/ld: warning: libclntsh.so, needed by /opt/ora9/product/9.2//lib/libvdc.so, not found (try using -rpath or -rpath-link)
/opt/ora9/product/9.2//lib/libocci9.a(occiUtil.o)(.text+0x99f): In function `oracle::occi::toUpperCase(basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> > const &)':
: undefined reference to `__ctype_toupper'
collect2: ld returned 1 exit status
Can anyone assist in resolving this issue?
Thanks
JD

Removed libocci9 and it compiled.
JD

Html link problem...

Hey!
Just wanned to say to those who answered my post on html link problems, that the problems I had were actualy because of the jdk version! I had jdk1.2 and now I have 1.3 and it works just fine.
thanx a lot to everyone who tried to help!!!

hehe i saw the topic "html link problem" posted by amidala and i thought " oh my god is she still struggling!" ;P
Kewl 'twas not a problem!

OCCI Link problem (Error LNK2019: unresolved external symbol) in VS2012

Hi,
I'm having a hard time with this. I'm trying to implement OCCI within my application. Error I'm getting is:
Error     1     error LNK2019: unresolved external symbol "public: static class oracle::occi::Environment * __cdecl oracle::occi::Environment::createEnvironment(class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > const &,class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > const &,enum oracle::occi::Environment::Mode,void *,void * (__cdecl*)(void *,unsigned int),void * (__cdecl*)(void *,void *,unsigned int),void (__cdecl*)(void *,void *))" (?createEnvironment@Environment@occi@oracle@@SAPAV123@ABV?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@0W4Mode@123@PAXP6APAX2I@ZP6APAX22I@ZP6AX22@Z@Z) referenced in function "private: bool __thiscall ServerDataLoader::getPreSuffixesFromDB(void)" (?getPreSuffixesFromDB@ServerDataLoader@@AAE_NXZ)     P:\code\VizTool\VizPortal\DwgDgnConverter\ServerDataLoader.obj     DwgDgnConverter
Error     2     error LNK1120: 1 unresolved externals     P:\code\VizTool\VizPortal\Debug\DwgDgnConverter.exe     1     1     DwgDgnConverter
Yes, it looks like linking problem,...but for me everything seems set-up.
- Included header files (from instantclient-sdk-windows.x64-11.2.0.3.0.zip)
- Included library path from OCCI download (11.2.0.3.0)
- Added oraocci11d.lib in linker
Please, what am I doing wrong?
Millions of thanks for any kind of feedback ;-)

Have you succeeded? I tried vs2012 and it passed compilation, but gave the run-time error of _crtisvalidheappointer. But the same code runs well with vs2010. I think Oracle needs to publish the new patch for vs2012

Pro*C linker problems

Similar Messages

Maybe you are looking for