Pro Cam pictures problem - reframing option broken

Ok not the best description of a problem! But let me tell you what has happened.
I took some 200 photos on my new Lumia 1020 on a recent holiday in Ibiza using Pro Cam (5mp & 34mp mode). When I got home I *moved* all of these photos (both "pro" and "pro_hires") off the phone because my plan was to use my PC to review and only keep the best photos on the phone. I then copied the "pro" and "pro_hires" versions of the keepers back onto my phone. Now the problem..... in the Gallery these photos are no longer recognised as being taken by Pro Cam (you only see the 5mp versions). I'm really quite disappointed by this - if appears that if you take them off the phone and put them back again then Pro Cam will not recognise them and you lose all the reframe "zoom later" functionality.
Just to summarise , I have copied both 5mp and 34mp versions of some photos back into the Camera Roll folder (which is where I orignally found them using my PC) but Pro Cam does not recoginise them as being taken by the the app.
Help!
Solved!
Go to Solution.

This is a real shame as it must be possible as the sample photos on the phone are obvious;y added during production and not actually taken by the handset. Wonder how they do it ?
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Nokia Pro Camera App Problems

I am on EE and finally got the Pro Cam App last night when I got the Amber Update for my Lumia 920. I have two problems with it:
1) Everytime I take a picture, the image I've taken is displayed on the screen and doesn't go away, I have to return to the camera. This is quite a annoying if I'm taking a series of images.
2) This is a real deal breaker - everytime I take a picture it looks great then seconds later a yellowish hue is applied and the whole image is softened. It takes great vibrant pictures and then ruins them with some awful image processing after the picture has been taken! Is this happening to everyone else?

As 808PV no longer manufactured and Symbian in "maintenance mode" it ain't going to happen.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Since last update, Pro Cam broken

Hi there,
a few days ago there was an update for the Nokia Pro Cam on my Lumia 920. Since this update I've had some issue with the App.
When I tap the App-Icon, the app starts and the App loads up. When I now take a picutre (every option is on auto) I beeing dropped back to the homescreen. When I tap the Icon again, again the App loads up and when I tap the pictures-bubble to see the pictures I've taken I also get back to the Homescreen.
When I use the Nokia Smart Cam App, everthing works great.
I'm using Windows Phone 8 GDR3 (developer preview) on my Lumia 920. My Provider is O2-Germany.
DerSia
Solved!
Go to Solution.

Pro Cam app is now Nokia Camera, does it still show as Pro Cam on your phone? If you have not installed Nokia Camera yet, then you can update/install through this link -> Nokia Camera
The silence will fall

L920 Pro Cam Manual Focus to Infinity problem

I am loving the Pro Cam, but I recently found a problem with the manual focus...when I use manual and set it all the way up to infinity distance, really far away objects are actually out of focus. The shot actually seems to focus on subjects ~10 feet in front, and happens with both image and video capture. Is this intentional, or actually a glitch?
In the image samples, the first one is a snapshot of a video taken with manual focus at infinity. Notice it seems to be focused on the crowd's heads two or three rows in front instead of the whales. The second is a picture taken with auto focus.
Attachments:
Image1.jpg ‏535 KB
WP_20131130_11_40_06_Pro.jpg ‏2687 KB

Just to let you know, same problem here and a live thread going on : http://discussions.nokia.com/t5/Nokia-Lumia/Lumia-1020-Problem-with-quot-Infinity-quot-Focus/m-p/237...
Please post on that thread so we finally gain attention from Nokia !

Macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner

macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem

macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem

My MacBook Pro came with Lion pre-installed so I can't re-download it from the app store. Is it possible to get the installESD.dmg file and how can I get it if I can't re-download Lion in Apple Store option?

My MacBook Pro came with Lion pre-installed so I can't re-download it from the app store. Is it possible to get the installESD.dmg file and how can I get it if I can't re-download Lion in Apple Store option?

FYI Mac OS X is not designed to be installed on additional Macs, unless you purchased it from the App Store, in which case you can make as many copies as you wish and install it on as many Macs as you own.
From the Recovery Disk Assistant -
Notes
If the computer shipped with OS X Lion or Mountain Lion, the external recovery drive may only be used with the system that created it.
If the system was upgraded to Lion or Mountain Lion purchased from the App Store, the external recovery drive can be used with other similarly-upgraded systems.

Lumia 1020 pro cam just keeps taking photos when y...

On my att 1020 if you try to take a picture in the pro cam app using the camera button on the side of the phone it will keep taking photos untill you back out of the application. Works fine if you use the onscreen button to take the shot. The camera button works fine in windows(opens the pro cam app). It also works fine in the built in windows camera app. This problem happens using either camera in the pro cam app. The steps I've taken so far in order(phone was up to date on the auto updates at the beginnning:
Power cycled the phone(held power and told it to shut down)
Reset the camera in the pro cam app
Uninstalled the pro cam app and downloaded it from the app store
Did a factory reset of the phone and tried again.
Ran the updates and tried again.
I called AT&T's support to see if they had any ideas and they didn't. The twitter support for nokia was a wash as well. Has anyone on here seen this before and have any ideas?

Not sure if this is the cause but ...Open Nokia Pro Cam and tap Options (...) .. Confirm that 'Bracketing' is not enabled..
(I enabled it and then did Reset the Camera settings.. still it was ON .. It got disabled only when I selected to Cancel it ..)

Image Processor Pro and Picture Processor load eps files without rasterizing them

Hi. My name is Lucas. Im from Argentina, now living in Brazil. I have the problem that is in the title. Im new doing this stuff but reading a lot i discovered that both scripts open eps files and because they dont get reasterized, then saved files looks preety bad.
I know that there are some parameters to open eps, ex:
var epsOpenOptions = new EPSOpenOptions();
   epsOpenOptions.antiAlias = true;
   epsOpenOptions.mode = OpenDocumentMode.RGB;
   epsOpenOptions.resolution = 72;
   epsOpenOptions.constrainProportions = true;
I have to say that looking for a solution a found a script and modified to suit partially my needs. I said partially because i need the script to look folders and save output files with same structure. Here is the script that manage one folder at a time:
#target photoshop
// Asks user for input folder
var inputFolder = Folder.selectDialog("Select a folder to process");
// Asks user for output folder
var OutputFolder = Folder.selectDialog("Select a folder to save your Tiffs");
if ( inputFolder != null && OutputFolder != null ) {
   // Makes list of all files located in that folder
   var fileList = inputFolder.getFiles( "*.eps" );
   // Create a EPS option object [height & width are doc size]
   var epsOpenOptions = new EPSOpenOptions();
   epsOpenOptions.antiAlias = true;
   epsOpenOptions.mode = OpenDocumentMode.RGB;
   epsOpenOptions.resolution = 72;
   epsOpenOptions.constrainProportions = true;
   // Open each file in turn
   for (var i = 0; i < fileList.length; i++) {
      // open the file
      app.open( fileList[i], epsOpenOptions );
      var baseName = activeDocument.name.slice( 0,-4 );
      // put your code to 'save as' the file here
      var saveFile = new File ( OutputFolder + "/" + baseName + ".jpg" );
   SaveForWeb(saveFile,60); // set quality to suit
function SaveForWeb(saveFile,jpegQuality) {
var sfwOptions = new ExportOptionsSaveForWeb();
sfwOptions.format = SaveDocumentType.JPEG;
sfwOptions.includeProfile = false;
sfwOptions.interlaced = 0;
sfwOptions.optimized = true;
sfwOptions.quality = jpegQuality;
activeDocument.exportDocument(saveFile, ExportType.SAVEFORWEB, sfwOptions);
activeDocument.close( SaveOptions.DONOTSAVECHANGES );
So, if you know some way modify image processor pro or picture processor i will be very pleased.
Because i will only use the script to manage eps files and save them as jpg (save for web) i dont need an special button to activate that option. Keep it simple. Thanx!!

You can tweak ImageProcessorPro.jsx by make the following edit.
Search for code that looks like this:
ImageProcessor.prototype.openDocument = function(file) {
var self = this;
var settings = self.settings;
var mode = DialogModes.NO;
var ext = file.strf("%e").toLowerCase();
var isRaw = ImageProcessor.CAMERA_RAW_FILES.contains(ext);
if (isRaw) {
and insert this code right after it:
if (ext == "eps") {
    var epsOpenOptions = new EPSOpenOptions();
    epsOpenOptions.antiAlias = true;
    epsOpenOptions.mode = OpenDocumentMode.RGB;
    epsOpenOptions.resolution = 72;
    epsOpenOptions.constrainProportions = true;
    try {
      var doc = app.open(file, epsOpenOptions);
    } catch (e) {
      Error.runtimeError(9002, ZStrings.UnableToOpenErr);
    return doc;
I haven't tested this at all but it looks good from here.

I just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk

i just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk

It sounds like your hard drive either has a software problem that Disk Utility cannot fix or that the HD has failed (mechanically).
Your Mac may have booted either to your recovery partition or to internet recovery in an attempt to repair the drive- I can't tell from your post.
I'll assume that it was the recovery partition.
Try to boot into internet recovery (hold down option command R at restart), and see if you can repair your HD with Disk Utility. You should also repair permissions while you're there.
If that doesn't work, try to boot into single user mode (restart, hold down ⌘S until you see a black screen with white text) and repair your hard drive. Here's a reference with directions: Repair Your Hard Disk in Single User Mode | Everything Macintosh
If that doesn't work you have a few options:
If your mac originally came with installation disks, you can try to boot from the installation disk and then see if you can repair the HD.
There is a small chance that Techtool Pro 7 will be able to repair your HD if Disk Utility can't.
If none of that works then your HD has probably failed and will need to be replaced, which is not too difficult to do yourself if you can use a screwdriver.

Nokia Pro Cam photos post-processing makes yellowi...

Hello there! I'm here to report a common problem which happens while taking pics with Nokia Pro Cam on my lumia 920. When you take a pic it has right colours and is very sharp but after apps' post-processing the pic turns yellowish and a bit softer. It doesn't look too good after that treatment. I'm asking for patch that would prevent this problem. While I was at Windows Phone central-forums I saw that I'm not alone with this issue.
There is photos when one can see this issue.
First is just after taking pic and second is after processing it. I guess one can see very clear difference.
Attachments:
wp_ss_20130829_0004.png ‏1693 KB
wp_ss_20130829_0005.png ‏1377 KB

shadow118 wrote:
I see the same thing on my 620 (yes, I know Pro Cam is not officially supported by the 620 and would not work as good as on 920 or 1020, but I found a way to get it the interface is just so much better)
When I take a picture with manual focus, in the screen the pic looks sharp, but when i open the gallery, it changes (wll, postprocesses) to blurry
just a reminder, using unsupported apps may cause serious hardware problems in short/long term. i'm sure u won't be happy when u see melting plastic parts and some smoke on your device
The silence will fall

Edit pics with pro cam in Lumia 1020

Hello.
we just come back for a week holidays and i use the nokia pro cam a lot and everything was fine (the pics had at bottom "taken with Nokia Pro Cam". I wanted to create an album for this trip and create a folder from my pc with windows 8 in the lumia and cut / copy the photos ... Now I can not open the photos (I do not get the option at the bottom of the pictures). I copied the photos again to camera roll, but neither. How I can re-open the photos with the application I used?.
I hope I explained well
Sorru for my english
Solved!
Go to Solution.

Thank You
I didn´t find the option... This will work in any custom folder?
And another question, if you do not mind, how could i free up space after refocusing, photo retouching etc?
I have almost no free space ....
Thank you again

Blur video frame with NI PCI-1411 and JAI CV M-300 camera (urgent problem)

Hello,
I am new with Vision and I need some advice with a problem, which I encountered.
I have a computer with integrated NI PCI-1411 board, which is connected to a JAI CV M-300 camera. I am measuring a steel part which is positioned in a dark chamber. The part is put on a glass board and is illuminated from underneath with light.
The part is moving. I have to measure this part when it reaches the camera region. I have made a test with not-moving part and everything is perfect. Now, when I move the part I get blur frames from video (with these no part measurement is possible). I need specify, that the camera has no trigger, so it makes video all the time (this video is later inspecting with Vision Builder).
I have tried to change parameters in MAX, but no involvement. I have found no proper icd/file for the camera.
I also could use a SONY DXC-950P camera, if this is better.
How can I eliminate the blur from video frames? Or what am I doing wrong? Is the camera not good enough? Camera + trigger would get better images.
I have attached the video frame with moving object (static) and the blur video frame with moving object (dynamic).
Please give me a answer or ideas as soon as possible.
Thanks.
Attachments:
static.jpg ‏391 KB
dinamic.jpg ‏421 KB

You are using an interlaced camera. It takes half the picture (every other line), waits a split second, then takes the other half of the picture (the other lines). When it puts the two images together, you can see the two positions it was in when the images were taken.
The best solution is to use a non-interlaced or progressive scan camera, which takes the entire image at one time. The Sony might be this type of camera, since it has a P in its name. I didn't look up the specs.
If you can't get the right kind of camera, your only other option is to use fields instead of frames. One field is the half image taken at one time. The image will be half the height of the original image, though, which can mess things up.
Another possibility is the reduce the resolution of the image. If you take every other pixel in both directions, you will have a very clear image that is half the size of the original. You can do this with Extract in LabVIEW, not sure if it is available in VBAI.
Bruce
Bruce Ammons
Ammons Engineering

INSIGNIA 50" 1080p plasma picture problems

I purchased a INSIGNIA 50" 1080p plasma HDTV (NS-PDP50HD-09) last year, and it's plagued with this picture problem. What happens is the picture will split in half down the vertical middle, and the left half will bounce up and down one way, and the right half the opposite way. It's starting to get worse and worse. So i called support over a month ago (and it fell and still falls for a week under the 1 year manufacturer's warranty) and best buy sent a 3rd party company to look at it. Unfortunately they only work during weekdays, and close at around 5, so i had to take days off to have my tv serviced. I finally got it back, however it's been a week and the problem has resurfaced. I just called in again, and they said they will resend the company to look at it again. However, I am becoming frustrated with the situation, because the warranty end date is nearing, and although i was assured that there is a 90 day guaranty on it, i've paid for something is essentially broken. When it worked properly, i was very satisfied with the TV. Am i going to be stuck with a 75lb paper weight? I don't believe this model is manufactured anymore. Are there any options for me?

I've got the same exact problem with mine. It only does it when it's in one of the zoom modes. I had a tech check it out and he had fixed the problem but 3 months later the problem started up again. Now I'm just waiting to hear back from BB on if they're going to fix it or replace it.

IPhoto not seeing camera pictures

When hooking up my camera to my computer, iPhoto recognizes it but on the import screen displays "no photos to import." However the Sd card in the camera does in fact have pictures on it (413 to be exact). I've even tried importing the pictures via image capture but the "no pictures to import" prompt appears. Any ideas to help with offloading the pictures would be greatly appreciated.

Hi David. This is a post I made in early Dec. Hope it helps. Best regards.
Hi discussions. This is just an answer to a problem I was having and might be helpful to anyone having iPhoto camera connection problems. First off, I have four apple computers; three running 10.4.11 and one, a new 2.8ghz MacBook Pro, running 10.5.5. The Canon 750 Elph is two months old. From the beginning it has connected to my desktop DP 2.5ghz G5 PPc, my 12" 1.5ghz G4 Powerbook (both running 10.4.11) and now the MacBook Pro. It would not connect to my wife's 17" 1.33ghz G4 Powerbook running 10.4.11. System Prefs identified the Elph connected to the usb high speed bus so I knew that the usb ports were operational. Image Capture stated; No camera connected. As always, all updates had been performed and permissions run. I trashed iPhoto '08 along with its prefs and all iPhoto receipts. I then reinstalled iPhoto '08 and ran permissions. Still no connection. It was time for Apple Discussions. I followed a thread from some weeks ago to try rebuilding the iPhoto library. I saved and rebuilt. No connection. My apologies for not remembering the user in the thread who stated that a reinstall of the last OSX combo update might do the trick. He was speaking of the 10.5.5 combo update so I figured it should be the same for the 10.4.11 combo. I did not know that you could install an update over the existing OS which has already been updated. I am always learning. BINGO! The Elph connected immediately. Thanks to APPLE DISCUSSIONS, I still have a bit of hair left and a wife who loves me. I hope maybe this post will save the hair of someone else.

PSE 10 organizer displays SAMSUNG CAMERA PICTURES title for every imported image.   How to eliminate?

PSE 10 organizer now displays SAMSUNG CAMERA PICTURES as the title for every imported image. This is very annoying.   How to I prevent PSE from assigning this attribute to the title metadata upon import?   I have thousands of photos, and going through each one to delete the title isn't really an option.   Has anyone encountered this type of behavoir?
Windows 7 pro, if that matters.
Thanks,
--Hoggie

hog_2002 a écrit:
PSE 10 organizer now displays SAMSUNG CAMERA PICTURES as the title for every imported image. This is very annoying.   How to I prevent PSE from assigning this attribute to the title metadata upon import?   I have thousands of photos, and going through each one to delete the title isn't really an option.   Has anyone encountered this type of behavoir?
Windows 7 pro, if that matters.
Thanks,
--Hoggie
It's an old behaviour from some camera manufacturers (also Olympus...) which write their brand name in the exif field reserved to captions:
Photoshop Elements 6/7/8 Frequently Asked Questions (FAQ)

Pro Cam pictures problem - reframing option broken

Similar Messages

Maybe you are looking for