Pro L10: After using a wireless mouse, the touch pad has stopped working

Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. On start up the touch pad icon shows and the touch pad operates intermittently, after a few minuets the icon disappears and the touch pad stops functioning. In the control panel/mouse & or device drive I can the program operating and then disappears.
I have removed the software and reinstalled to no avail. On occasions I get a message to say that another pointer is in operation.
Can you help?

Hi
It seems that the wireless mouse or the wireless mouse drivers/software has a bad influence on the touchpad.
I dont have a proper solution for this issue. Well, you can check the Toshiba driver page for newest driver updates. If the updates doesnt solve this issue so I suggest to use either the wireless mouse and disable the touchpad with the key combination FN+F9 or to use a common USB mouse.
I assume that you dont have any problems with a common USB mouse.

Similar Messages

  • After upgrading, I am getting the dreaded "iTunes has stopped working" message.  I've followed all of the troubleshooting tips on the forum without success.  Fortunately, it works on my other computers.  Running Win7 pro.

    After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch.  I've tried the troubleshooting tips on the Forum without success (though most are pretty old...).  Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep.  Anybody else with this issue??

    My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
    My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
    Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
    thanks!
    Kathi

  • I have a fairly new iPod touch and the touch screen has stopes working in certain places like the bottom row of apps and things on keyboard I have updated it and restored it multiple times it makes no difference please help!?

    I have a fairly new iPod touch and the touch screen has suddenly stopped working..... Like the bottom row of apps has stopped working and certain buttons on the keypad are not working at all what so ever I have taken it to the apple store once before they told me to update it I did so and it didn't get better I have also restored it multiple times still nothing I really would like a working I pod please help!!!

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • I cannot use my ipad2 because the touch screen doesn't work at all. First I cannot unlock it or do anything in the screen!!!! Why?

    I cannot use my ipad2 because the touch screen doesn't work at all. First I cannot unlock it or do anything in the screen!!!! Why?

    Have you tried a reset To see if that fixes it ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • The dash key has stopped working on my macbook pro

    help!!the dash key has stopped working on my macbook pro mid 2010 and its amazing how much i need to use it has anyone else had this problem with keys and would they be able to fix it at the genius bar at my apple store

    Well if you took it completely apart and couldn't get it to work by operating the silicone "cone" then the trace or contactor must be corroded or discontinuous. The only repair is to replace the keyboard. Sorry.

  • HT3964 Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

    Hi folks, I own am IMac 27" running OS X 10.8.2. The optical drive has stopped working in that it accepts the disc but spits the CD, DVD even my original iMac install DVD back out, after attempting to read the disc. Any of you kind folks any ideas?

    Have you tried one of those CD cleaning Discs yet?
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.

  • HT1600 After updating my apple tv last night, it has stopped working. The light blinks but there is no input to the tv. I have reset it multiple times, have unplugged it, and it still doesn't work. What can I do?

    After updating my apple tv last night, it has stopped working. The light blinks but there is no input to the tv. I have reset it multiple times, have unplugged it, and it still doesn't work. What can I do?

    connect it by usb to your computer and restore it's firmware from itunes on the very same computer

  • The home button has stopped working on my iphone 5c. Did the same a few months ago and recovered 24hrs later. Can anyone explain this problem. Phone still in warranty. Had steam issue recently but this was after last home button episode.

    Have an iphone 5c 8g. The home button has stopped working. Did the same a few months ago and recovered 24hrs later. Can anyone explain this problem. Phone still in warranty. Had steam issue recently but this was after last home button episode and no evidence of damage.

    If you are playing in hockey arenas a lot or if you are bringing it into bathroom same time as shower it may not seem like much but overtime the steam can acquire and build up in the phones usb dock flex cable swell as the home button flex cable. Bring again into apple store and should be covered under warranty again. could also be a delay in a 8gb 5c software may just be very lag.

  • Mouse and touch pad not responding/working?

    the entire touch pad doesnt work when using the computer. also when a mouse is plugged in that doesnt work either!...... but both work fine when in the lenovo help section, (when pressing the lenovo help button) they only dont work from the login section and when logged in.
    HELP!!!

    I am facing similar problem. However it is little different. My touch pad stopped working just within 3 months after buying this product. Now the problem is no body is taking responsibility of this kind of problems customers are facing. Here the real problem is my blue light at the touch pad has also stopped working.
    I believe it means, it must have some hardware problem. Now it is almost more than 8 months to this product and am still struggling with this problem. The only good part of it is, here my usb mouse is still working.
    One more thing i would like to know here, how can i find lenovo help key you mentioned in your querry? Please guide someone to get rid of this problem.

  • I am running windows 7. My itunes keep shutting down on me. I keep getting the message itunes has stopped working What can I do?

    I keep getting the message itunes has stopped working. A problem has caused itunes to stop working correctly. What can be the cause?

    Hello Main Event,
    Thank you for using Apple Support Communities!
    I found this article while researching iTunes quitting unexpectedly on Windows 7 and feel it will help to resolve the issue here.
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    It starts with troubleshooting 3rd party plug ins, then moves on to account troubleshooting if needed.
    Open iTunes in Safe Mode to isolate any inference with plug-ins or scripts not manufactured by Apple.
    Hold down the Shift and Control keys while opening iTunes. If performed correctly, you should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    After clicking Continue, determine whether the issue you were experiencing persists in Safe Mode.
    If you see the same issue while iTunes is in Safe Mode, proceed to the Create a New User Account section below. If you do not experience the same issue, consult iTunes: Troubleshooting issues with third-party iTunes plug-insfor steps on how to remove third-party plug-ins.
    Take care,
    Sterling

  • Message "itunes has stopped working". Itunes opens and can read an audio cd but as soon as the "get information" option is selected the message "itunes has stopped working" and the computer freezes or at least slows to a snail's pace.

    Hi,
    I have a PC running Windows 7 - 64bit OS. I have had iTunes installed since the beginning of the year on this computer and have not had any trouble with it except actually using iTunes but that is a different issue. The other day I inadvertently downloaded "Tuneup" which I don't want or need. I firstly want to say I have no concrete evidence that Tuneup has led to my problems. It may be coincidental that Tuneup and my problems appeared together.
    Tonight when I started iTunes, Tuneup took over a quarter of the screen on the right side. I closed this program. When the list of tracks was ready to be loaded from the CD and I went to" file" - "get info" option the message "iTunes has stopped working" would appear. Closing this message resulted in iTunes shutting down. I should say that before I closed the message the computer had essentially ground to a halt. The other curious thing was the behavour of the mouse pointer on the screen - the only place where it was visible was in the "iTunes has stopped working" box. Moving it out of the message box resulted in it disappearing. It would reappear if it were caused to wander into the message box.
    I subsequently removed Tuneup (control panel, programs and features, etc...) iTunes had not improved. I then deleted iTunes, firstly saving the library to a file on the desktop. Then I did a fresh(?) install of ITunes but there seems to be no change. A curious thing was even though I had deleted iTunes through the control panel the library was still there as if I had done nothing. The whole thing is a complete mystery and extremely galling.
    If someone has had a similar problem I would really like to know what the fixes were.
    Thanks for "listening".
    Cheers,
    Grant Andrews.

    I had a similar problem. I'm using 64bit Windows7. The following solution worked for me:
    COPY    QTMovieWin.dll
    FROM    c:\program files (x86)\common files\apple\apple application support\
    INTO     c:\program files (x86)/iTunes
    Also, reinstalling Quicktime has worked for others having this same issue.

  • Problem with iTunes. I have Windows 8 on a new laptop. Installed latest version of iTunes. Can play music in My Library but when I click on Itunes Store I get the message "iTunes has stopped working. A problem caused the program to stop working correctly.

    I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
    Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • I get the message "rnpag has stopped working" followed by "firfoxx has stopped working", what can I do to get firefox working again?

    Over the past few months firefox has been crashing unexpectedly but just today it crashed and will not reopen even after shutting down and restarting my laptop. The message that appears when I start my laptop and again when I try to open firefox is "rnpag has stopped working" this is then followed by the message "firefox has stopped working" when I request a solution to the problem nothing happens.

    You don't have "Photoshop" proper.  You have a cheapo emasculated version called Photoshop Elements.  That is NOT Photoshop.
    As Gene told you:
    Unfortunately, you're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content

  • AutoFill from the Google toolbar has stopped working

    Installed Firefox 4.0 and the AutoFill function from the Google toolbar has stopped working. I receive the following message on everypage I try to use autofill on 'Autofill not available for this page'

    See https://support.mozilla.com/hy-AM/questions/812209

  • My iPhone 5 won't charge properly, computer doesn't recognise it and the home button has stopped working completely, it hasn't been dropped or water damaged at all, any ideas?

    My Iphone 5 won't charge properly, computer won't recognise the device and also the home button has stopped working completely, it hasn't been dropped or suffered any water damage, anybody else had anything like this? and what are the solutions? thanks

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

Maybe you are looking for

  • Adobe Flash Player problems

    Hi have installed latest version of Adobe Flash player but when i go to a site that ueses this app it says i need to down load latest version ? Can any one help me

  • I can't update itunes because it's saying Bonjour is on an unavailable network resource

    I have been trying to update itunes and everytime I try an error message comes up and says the bonjour feature is on an unavailable network resource.  When I click OK, it then says it cannot find the path to bonjour.  I am not sure why Bonjour is not

  • Why does my 8G Ipod Touch only allow 6.46g?

    I purchased a 8G Ipod Touch 4th Generation but it only allows 6.46G.  Why am I losing a full 1.54G?

  • ChaRM: transport layer/routes used by ChaRM

    Hi! We have very complex trasport system settings and would like to implement ChaRM with parallel usage of transports in non-ChaRM environment. We have a lot of transport routes (between DEV:100 and QAS:100) (e.g. SAP, ZDEV, ZFAD, ZGFA, YDAS). How ca

  • ITS - SRS (SAP Retail Service)

    Hi, In SAP Retail Store (SRS) which runs on ITS, in purchasing there is a button/link by which we can run 'Store Order Follow on documents', and 'RFAF' standard SAP transaction open. Now what I want is , after clicking on this button/link I want my c