Pro logic 8

hey guys, can I run pro logic 8 on a g3( i know it's a v. old machine but hey it's worth trying). thanks

maybe iLife 04 would work better on a stock G3, and GarageBand is only on a DVD, so the G3 would need a DVD drive also. It sounds like any of the MIDI software instruments require a G4 CPU (could upgrade the G3).
See the system requirements of the older iLife versions in these PR releases (you can probably find these older versions via mail order from the internet somewhere):
'04 http://www.apple.com/pr/library/2004/jan/06ilife.html
'05 http://www.apple.com/pr/library/2005/jan/11ilife.html
'06 http://www.apple.com/pr/library/2006/jan/10ilife.html
Even with my 1GHz G4 and 768 MB RAM, the number of simultaneous tracks you can use is still pretty limited, but you can mix down a few tracks to one audio track, and start a new project to add more layers that way...
It wasn't clear with the original question what operating system the G3 in question would be using, or its other specs...so it's hard to say what the best alternative would be in this case. Depends on how much you want to spend on upgrades.

Similar Messages

  • Problem with bouncing on my Pro Logic 9

    when i record a track on my Pro logic 9 and listen back to it, the sound plays perfectly. but when i bounce it into every format i could, it keeps coming out with a lot of static noise in the background of the track. Please does anyone know what the problem could be??

    I have just the same problem!
    Did you revolved it?

  • AUDIO SAMPLES FROM IOMEGA 100 ZIP DRIVE TO MAC BOOK PRO / LOGIC?

    Posted: Fri, Feb 15 2013, 1:27pm    Post subject: AUDIO SAMPLES FROM ZIP 100 TO MACBOOK PRO / LOGIC?
    HI THERE
    I HAVE LOADS OF OLD AUDIO SAMPLES ON ZIP DISKS ( ZIP 100 using akai cd3000 sampler ) THAT I WOULD LIKE TO TRANSFER TO MY MAC BOOK PRO FOR LOGIC EX24.
    IS IT A SIMPLE CASE OF A 'SCSI TO USB LEAD' , WILL MY MAC BOOK PICK IT UP FROM THERE OR DO I NEED SOFTWARE OR DRIVERS FOR MY MAC TO BE ABLE TO SEE THEM?
    IS IT EVEN POSSIBLE AT ALL?
    THANKS

    Hi guys
    Sorry for the delay in coming back. I bought a zip drive pretty cheaply then and it has only just turned up. However when I put my old ZIP disks in, it seems like the ZIP drive reads them at least but the MACBOOK comes up with the following message...
    'The disk you inserted was not readable by this computer'
    Does this pretty much mean a no go then?  Or can I put the samples from my AKAI sampler back through the old ZIP drive,  reformat some new disks in a certain way on that drive so that my MAC can read them?
    All its for really is mainly to take old tracks that used these samples and getting them set up in my mac.  Also there was some good bits and pieces there anyway and would like to keep using those samples for newer projects. I could of coourse resample them from the AKAI straight to the MAC but would be not as practical and would take alot longer. The 13'' macbook pros input is not digital, only its output.
    thanks

  • How to set output 1 and 2 and master in pro logic express when mixing

    what is the recommended procedure for setting the levels of output 1 and 2 fader and the master fain pro logic express when mixing? I'm used to just one master fader with my Mackie board.  Is there anything in the manual?

    Already found the answer myself.
    The entries have to be made in the sun-j2ee-ri.xml file.
    cheers,
    Markus Hammori

  • I download pro logic 9 to my second computer but some instruments are missing, can anyone advise me on this? Thank you. Gene

    I download pro logic 9 to my second computer but some instruments are missing, can anyone advise me on this?
    Thank you.
    Gene

    You're welcome!

  • Hello, i have pro logic 9, phonic midi hub,

    hello. i have apple mac book pro, running pro logic 9, just bought a phonic midi hub, so i can connect my alessis dm5 drums, but every
    time i hit a drum pad it put,s my channel volume down to zero, any help greatly received in this matter very frustrating ,awaiting your reply,
    ray.

    Thanks for replying to my question.  The reason I ask is when I open a Logic Express Project in Logic Pro, I get this message: "ES24 Brass Ens Instument cannot be found" (I just used Brass Ens as an example.) So I wanted to install Express again just to finish what I needed to finish in Logic Express, then move on to Pro. Does anyone have a solution to this problem?

  • I use Pro Logic 9 and see that to upgrade to Pro Logic X I need to buy the full package again. Does apple offer special conditions for their Apple clients ? Are users of apple care protection plan better served ?

    I use Pro Logic 9.1.8.  and see that to upgrade to Pro Logic X I need to buy the full package again. Does apple offer special conditions for their Apple clients ? Are users of apple care protection plan better served ?

    Old saying applies here most of the time......
    "If it ain't broken, don't fix it"
    I choose to use LP9 with Snow Leopard myself (10.6.8 and 9.1.6) for most of my commercial work simply because I find that combo very stable and provides the best overall performance for my setups here... but I am also using LPX with Mavericks as part of my client support and that works fine too although with a drop in performance due to the heavier demands made on the hardware by the newer OS X and LPX graphic routines for example..

  • Everything plays in Pro Logic.

    I bought a X-Fi Titanium today. I've spent the past seven hours trying to get it to play sound in anything other than Pro Logic mode.
    I have a Yamaha home theater with an optical cable plugged in to the digital out port of the card. I tried everything, even spent the past fi've hours downloading 30MB worth of updates from Creative's horrendously slow servers. One? thing I tried to do was to go to the option where I can switch to either Dolby Digital Li've or DTS Connect, however, once I click any of the two it instantly switches back to Disabled with a message that roughly translates to "The audio device is unavailable at the moment. Stop the reproduction then try again." despite having nothing playing at the moment. What's the deal? Did I waste u$90? I'm running Windows 7 64-bit if that helps.
    Google hasn't helped and the search function in these forums didn't help much either.

    Managed to get it working after installing some unofficial drivers and spending a few hours changing some settings until it ended up working. With such terrible support I have no plans in buying any other Creative products.

  • Pro Logic Express

    Just brought a new i7 imac.  Brought Pro Logic Express 7 online and now my computer will not allow the programme to open up?
    Not too sure what to do.

    Hi,
    That's a bit of a disappointment...
    From memory I think that Logic Express 7 was not compatible with Intel Macs...
    Perhaps you can return it and get Logic Express 9...

  • PS2 - Live! DE + Digital I/O 2 + Computer = decode Dolby Pro Logic II?

    Greetings,
    I am a joiner of this forum but a long time user of Creative Sound Cards
    since Creative Sound Blaser 2.0
    I have a CT4760 + CT4770 and... a PS2.
    I wonder if I can use a computer to decode Dolby Pro Logic II
    from the signal of PS2 game via optical out to
    Digital I/O 2 Optical In to computer to decode Pro Logic II
    and output to some Creative 5.1 Speaker for example, DTT2500
    or even Inspire 5700 (which doesn't decode Pro Logic II but DTS )
    Any clue or solution from any experience user except buying DDTS-100
    or some home theater solution with Optical In and Optical Input?

    When the pro logic option is selected in the audio options, you should hear sound from the centre and rear speakers when playing just stereo sounds like music. I think Pro Logic is usually a hardware thing, but perhaps it can be implemented in software too. I think Creative should replace the CMSS button with a Pro Logic II button, as they do a similar thing. Although this would probably make the soundcards more expensi've due to the extra cost of including the Pro Logic II chips.
    Actually, I have just read the post "<SPAN class=navbartext><SPAN><SPAN class=navbartext><SPAN>How to enable sound for my center, rear and sides speakers?", it says CMSS works well with pro logic material, so you could try that with your games. Also, the Audigy 4 is compatible with DTS Neo: 6, which is DTS's answer to Dolby Pro Logic II. Having never used Neo: 6, I don't know how it would sound with Dolby PL2 games, or whether it would work at all, but it might be worth having a go .<SPAN>
    Message Edited by pjc on <SPAN class=date_text>02-24-2005<SPAN class=time_text>06:33 PM
    Message Edited by pjc on 02-24-2005 06:33 PM

  • Installing Pro Logic 9 on 2 computers?

    I purchased Logic Pro back in 2011,I downloaded it from the Apple Store.My question is if I buy a Mac Pro can I download it on that computer without having to buy Pro Logic again?

    hi,
    if you have bought logic pro in the app store, then you can go to "purchases" there and download it again. you can install logic on any other computer in your house.

  • Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

    Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.

    Thanks for responding. Everything seems to work right except for the when I plug into the 737. Ok let me see if I can be more clear. I had this set up done with two representatives of Neumann, and DBox. Here it is I hope this helps. 32 Channel snake (24 Inputs 8 outputs) Channels 1-8 from snake to my Octopre for Drums. From Octropre output quarter inch lines into the Apollo 2, quarter inch input. This is so that the Apollo 2 is taking the drum tracks. Snake Channel 9-12 into Apollo 1 channels 1-4 xlr. Snake Channel 13-16 into Apollo 2 Channels 1-4 xlr. Snake Channel 17 into the 737, output of 737 into Channel 5 of the Apollo 1 quarter inch.
    Ok The Dbox. Sum output L&R into channel input 7&8 of Apollo 1. Apollo 1 output channels 1-8 into summing input channel 1-8 of Dbox. Apollo 1 main L&R going to main analog input L&R of Dbox. Spid out to DAW input of Dbox. I have both ADAT of both Apollos connected by optical wire. Also have port 2 of Apollo 1 into port 1 of Apollo 2 connected by Firewire.  Let me know. Hope I got it right. Thanks for responding.

  • Pro Logic/Studio on Macbook

    Hi people
    I'm a newbie here so easy on me.
    In short, whats the difference between Pro Logic 8 and Studio (or are they the same).
    Also, would my macbook run it? Its the first gen macbook from the other year, black one with 2gb and 80gb hard drive
    Any answers would be welcome
    Thanks
    Adam

    Hi Adam,
    I don't know drumagog and what kind of a cpu-hog it might be, but just to give you an idea:
    7 Audio Tracks
    1 Pro 53
    1 Massive (which has "massive" impact on cpu)
    2 EXS24 Samplers
    1 Guitar Amp Pro
    1 Space Designer
    and lots of EQs and compressors
    does between 5 and 30%
    You should be able to double your setup without running into problems
    Have fun, Henrik

  • LT/RT Pro Logic for DVD

    I have been given a set of audio files for a DVD. I have 6 mono channels for 5.1 surround, and two stereo LT/RT files which I believe are encoded for Dolby Pro Logic playback.
    What workflow should I follow for encoding this stereo mix to include the Dolby Pro Logic information - will FCP strip this out if I export Dolby 2.0 using Compressor from my sequence with the LT and RT aiff files concatenated into a sequence?

    Actually, the stereo filesl I have are not Pro Logic, but are a pre-downmixed mixed stereo version of the surround mix (not 2-channel Pro Logic). So that should survive the encoding process just fine.
    I set up my sequence with 8 audio outputs, a stereo pair on 1&2, and 6 mono outs for the individual surround channels. When I export audio to aiff(s) from the sequence wiith the track mappped to the correct outputs, I get a stereo pair and the appropriate 6 mono files for the surround encode in compressor.
    II just needed t talk with the audio engineer to make sure that I understood the technical details on the files I was given.
    On one surround receiver I was testing on, it rather stubbornly refused to recoginze the 5.1 surround coming from the digital connection to the DVD player. In this case, activating the receiver's simulated surround effects resulted in very strange phase issues in the downmixed surround, but this had more to do with the setup of the receiver, and not my software workflow.
    Thanks for your help!
    Max

  • Pro logic

    just wonder where i find the serial number for pro logic to continue downloading from appstore

    FWIW.. and this is not directed at the OP.. It's just a general observation...
    There have been three causes I have come across when Logic asks for some data from the User that the User doesn't have.. or cannot provide
    #1 The User bought a second hand computer (or was given a hand me down) that previously had either a legal or illegal copy of Logic installed
    #2 The user previously installed an illegal copy of the Boxed sets of Logic at some point and has now decided to purchase and install a legal copy from the App Store and it asks for the serial for the illegal copy.
    #3 The User previously installed an illegal version of the App Store version and now it's asking for an Apple ID and Password that the User doesn't know or have access to for obvious reasons.. (This has recently become the most common one I have come across but the previous two are fairly common too it seems)
    To that I'll now add #4 The user has downloaded a corrupted installation of Logic from the App store!

Maybe you are looking for

  • Short Dump SAPSQL_ARRAY_INSERT_DUPREC

    Hi Experts, I am getting a the short dump SAPSQL_ARRAY_INSERT_DUPREC after executing report SDRQCR21 at line 1258 INSERT VBBE FROM TABLE DA_XVBBE. Please help.

  • Need help identifying specific model

    I have a Toshiba Satellite Laptop. The model number and serial number have been rubbed off from the back. I'd like to know which model I have. It has L505 on one of the decals on the front of the laptop. I have looked at the specs for each of the L50

  • How can I create this rollover effect in Flash CS5?

    I'm pretty new to Flash, and I want to create a button like these. I understand how to make a basic rollover button, but I haven't got a clue how to do animation like that. http://www.werkstette.dk

  • How to reduce the cost for this select script

    Hi, "select id from order where cmd like 'Error ID %'" This s my script. And the order table has morethan *5lakhs* records, when i select id for the above condition, my sql script cost is - *2200*,and cpu_cost is -- *235660697* i got this above infor

  • RTF template design issue for header and body section

    Hi All, I have a RTF template having header and body sections. in header section i have order number, customer number etc. in body part i am displaying details for the respective order. But the problem is in header part my query is returning multiple