Pro NAS ix4-200r "failure has been detected" but what type of failure?

I have a StorCentre Pro NAS ix4-200r that is reporting "Data is available, but a failure has been detected." however the Event log doesn't actually tell me what type of failure was detected.
In the settings, disks show normal. I've been through the manual and every setting panel and there is no hint to what the error actually refers to.
How can I identify the actual fault? Does the message mean that data corruption was detected? That a drive is failing? That SMART status triggerred an alert? Does it check external drives? Is there a way to turn up the logging level and kick off an integrity check / diagnostic?
Moving forward I either need to take it offline and check each drive individually using something like Seatools (which won't help if it is simply data corruption), or format the NAS and start over (which won't help if there is a failing drive). Any ideas?
Solved!
Go to Solution.

It is odd that sdc and sdb are out of order, but sdd 3 should be the hard drive in slot 1.
If you really wanted to test this, you could remove the drive and then run the dump log again and check with the same process.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Similar Messages

  • Error message says "an ipod has been detected but it could not be identified.  We've disconnected the ipod and reconnected it but it hasn't worked.

    error message says "an ipod has been detected but it could not be identified.  We've disconnected the ipod and reconnected it but it hasn't worked.

    If the iPod was originally formated to your computer, restart your computer.  If not - How to use your iPod to move your music to a new computer

  • Itunes won't recognize my ipod nano 5th gen. it's recognized by the computer, but I get a message from itunes that says an ipod has been detected, but it couldn't be identified properly. i did all of the steps on the ipod assistant. unistalled and reinsta

    Itunes will not recognize my Ipod Nano 5th g. It shows up on my computer. But Itunes gives me a message that says "An ipod has been detected, but it could not be identified properly. I did all the steps in the ipod assistant. Unistalled and reinstalled drivers and itunes. restarted ipod and even erased everything. It is recognized by other computers. And itunes recognizes my iphone fine.  please help.

    Have you restarted your computer?  iTunes updated? 

  • In Windows 7, iTunes  gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again.

    In Windows 7, iTunes  gives error message "An iPhone has been detected, but it could not be identified properly. Please disconnect and reconnect the phonon then try again."
    I have a iphone 4S. It has been activated on Win 7 computer and synced. But overnight this meassage reappears.

    I have same error except that i get it even when my phone is not connected.

  • TS1363 "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    "An iPod has been detected but it could not be identified properly"  iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

    Hi cueball819,
    Thanks for using Apple Support Communities.  This article has steps to try if your iPods aren't recognized by iTunes or Windows:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Ari

  • ITunes message: an ipod has been detected but could not be identified properly.

    For some reason my ipod nano 7th generation will not connect to iTunes anymore. It comes up on my computer but iTunes will not "identify" it. I have tried resetting my ipod and unistalling iTunes then reinstalling and following the help intructions online. Anyone know how to fix this? Cheers.

    I recently began receiving this message when i try to sync my ipod to itunes:  " an ipod has been detected but it could not be identified properly."   Never had this problem before.  Have tried all troubleshooting suggestions.
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • A new ipod has been detected but cannot be identified. [drivers?]

    Yes -that again- the reason I'm making a new post is that this is the second time an ipod hasn't worked with me, I would like to know if there's something I can do to my system or whatever to repair it. Here's the situation.
    - Just so ya know, I use Vista on a laptop [unfortunatley]
    - Previously [as in yesterday] I had an ipod touch, it was stuck in recovery mode and nothing [and I mean nothing] worked to recover it, it wasn't being recognized at all. This problem occured when I installed Itunes 9.
    - Today I bought myself a brand new iPod Nano (5th Gen) for several reasons [not just to do with the itouch breaking, I was sick to death of the thing in general], took it home and connected it. 'A new ipod has been detected but cannot be identified' yadda yadda.
    - I tried everything, I have also downgraded my itunes back to 8, still the same message!! Argh! Here's the thing (that I think might be causing the problem) when I open Device Manager and go to Universal Serial Bus Controllers, there is no apple/ipod recognized. There is a 'USB Mass Storage Device' whch has an error symbol next to it, I've tired updating/reinstalling it etc and it doesn't work ):
    - Is there anything anyone can do? I'm so sick of ipods breaking on me. Just so you guys know, I'm not completley computer savvy so i'll need precise instructions, thanks so much to anyone who can help me.

    This is how it's displayed: http://i50.tinypic.com/nd7vk7.jpg
    And this is what happens when I click properties and 'search for solutions': http://i47.tinypic.com/2iu3vrc.jpg (the box disappears after that, apparently having done nothing, when I search online for software it informs me my computer already has the best/latest installed)
    I use a Toshiba Satelite L350-170, my Vista is a 32-bit Thankyou!
    Message was edited by: Martha11

  • "An iPod has been detected, but it could not be identified properly" error

    We have had five iPod Nano's installed via our home computer (Dell PC - Windows Vista):
    one 2nd generation (currently being used)
    one 3rd generation (not in use - was lost)
    one 4th generation (not in use - was stolen)
    two 5th generations (currently being used)
    The iTunes 10.0.1 Update was installed during the first of the two 5th geneartions installation process.
    We recently bought another 5th generation. When we went to install it, we received the error message "An iPod has been detected, but it could not be identified properly". The 2nd generation can access the entire library and download music but the two 5th generations are no longer able to access the library and download music. Basically, they can only be used to listen to the current music within does 5th generation iPod Nano's.
    We tried everything that's been recommended in the Support section but nothing has worked in order to restore the capability of accessing the library and downloading music for the 2 generations....This is where we need HELP!!!
    As for the new 5th generation, we have installed it into our laptop instead with no problems (so far). We've read that there is a way to move the iTunes Library from one computer to another which we hope this will be an option once we fix the issue of the two 5th generations.
    If anyone can provide any recommendations please post. We have spent the better part of our weekend trying to fix this problem with alot of frustration along the way.
    Thank you

    Uninstall everything from your pc that is published by Apple. This includes; iTunes, Quicktime, and Bonjour. I also had this problem and it is VERY frustrating. Then re-install iTunes of course.

  • I POD HAS BEEN DETECTED BUT CANNOT BE IDENTIFIED PROPERLY

    my 6th generation nano shuffle when plugged in responds with the message: 
    "i pod has been detected but could not be identified properly"
    then i am prompted to reinstall itunes. have done this but the problem remains.
    i cannot sync from my itunes.
    help please?

    I spent an hour on Apple help last night with this problem. We tried all the obvious things first:
    1. resetting the ipod.
    2. changing USB ports
    3. removing all other USB connections.
    4. Uninstalling Itunes and installing a fresh copy.
    5. clearing the saved application data (in Application Data / Itunes a hidden file on my version of Windows 7).
    6. changing the drive letter in disk manager (the ipod would not show up with Itunes installed but did show up when it was uninstalled).
    7. Deleting the USB connection and allowing it to reestablish itself in Device Manager (the USB connection showed up in device manager with a conflict notification).
    NONE OF THIS FIXED IT!
    I got to the second level of tech support and we repeated most of the above.
    Here is what worked in Windows 7.
    1. Go to Device Manager (click on Start / control panel/ Hardware and Sound / Device Manager).
    2. In device manager click on the drop down arrow for the "Universal Serial Bus Controllers".
    3. Right click on the "Mass Storage Device" (all other USB drives should be removed prior to this) and choose "Update Driver Software".
    4. Browse to C drive / Program FilesX86 / Common Files / Apple / Drivers and click ok to update the USB drivers.
    NOTE my copy of Itunes did NOT have a driver file in this location! so instead we pointed to the same location as above except instead of Program Filesx86 we used the same path except using "Program Files" with NO X86!
    C drive / Program Files / Common Files / Apple / Drivers
    Once the driver updated I rebooted the computer with the Ipod attached and it recognized the ipod.
    I think that not having the driver files in the X86 path is a bug in the software. I hope this helps!!

  • Ipod has been detected but cannot be propberly identified

    ipod has been detected but cannot be propberly identified
    i tried everything my itunes will not proberly identify the ipod

    uninstalling and reinstalling iTunes,
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • An iphone has been detected but could not be identified

    I downloaded the latest iTunes to my laptop.  I had to install the mobile device portion manually in order for it to see my devices.  Now it sees both my new iPhone 6+ with ios 8.1 and my iPhone5 ios6 (I can't upgrade this phone to 8.2 because I get a generic Unable to Install Update.  An error occurred installing iOS 8.2.))
    After identifying my iPhone (the icon appears) it will hang for about 5 minutes and then I get the message "An iPhone has been detected but could not be identified" So I have rebooted my laptop, both iphones, tried different usb ports, different sync cords, turned off the wireless.  Nothing has worked.
    I have spent about 5 hours trying to 1) get iTunes to recognize my iphones, 2) trying to upgrade my iPhone 5.
    I want to:
    1) backup my iPhone 5 on iTunes so I can restore it on my iPhone 6+.
    but I will settle for
    2) restoring a one month old icloud backup on my iPhone 6+ but again, I can't get iTunes to attach to my iPhone 6+
    I'm thinking it's something to do with iTunes but I have uninstalled and installed it 5 times already today.
    This is my 10th iPhone.  Even though I have only owned this iPhone 6+ for 5 hours I'm thinking of returning it.  I am so frustrated..
    Thank you for any help you can provide.

    I am also experiencing a similar problem.  The popup error window reappears repeatedly, but I can make it go away after clicking on it.  Sometimes is takes 10 or more times, but it will go away for awhile.
    Additionally, iTunes doesn't seem to recognize when a device is no longer connected via wifi, e.g. someone takes an iPhone or iPad out of the house. iTunes appears to be trying to reconnect to the device, and if it's selected in iTunes the process will eventually fail after several minutes, but iTunes is unusable while it tries to reconnect to the device.
    Wifi sync enabled on all devices.
    2 - 3GS iPhones, iOS 5.0.1
    1 - iPad v1, iOS 5.0.1
    1 - iPad v2, iOS 5.0.1
    iTunes v10.5.0.142
    Windows 7

  • Itunes is saying that 11.0.5 is the most current version on my mac book pro even though 11.1 has been released.  what gives?

    itunes is saying that 11.0.5 is the most current version on my mac book pro even though 11.1 has been released.  what gives?

    Hey Blake Placid,
    Thanks for the question. If you have not already done so, I would download and install iTunes directly from the following link:
    Apple - iTunes - Download iTunes Now
    http://www.apple.com/itunes/download/
    Thanks,
    Matt M.

  • An iPod has been detected, but it could not be identified properly. Please disonnect and reconnect the iPod, then try again.

    I have uninstalled and reinstalled itunes and I am still getting this error message. An iPod has been detected, but it could not be identified properly. Please disonnect and reconnect the iPod, then try again.

    Hey there gentzdo,
    Welcome to Apple Support Communities.
    This article provides information and troubleshooting tips that'll resolve most issues like the one that you've described, where your iPod nano isn't identified properly by iTunes.
    iPod nano: Error message saying that iPod could not be identified properly - Apple Support
    Cheers,
    -Jason

  • How come when i connect my nano to my computer it says in itunes "an ipod has been detected but could not be itentified properly"?

    whenever i connect my ipod nano to my computer, itunes gives me a pop-up that says, "an ipod has been detected, but it could not be identified properly. Please disconnect then reconnect the ipod, then try again." when i do that, i get the same pop-up. beneath the pop-up stated before it also says "If the problem persists, uninstall Itunes, then install Itunes again." but after doing that, it still will not read my ipod and scan it in.

    Does the Apple ID on the iPod match the Apple ID on iTunes?

  • "An ipod has been detected, but it could not be identified properly. Please disconnect an reconnect the iPod, then try again. An unknown error occured (2005)."

    "An ipod has been detected, but it could not be identified properly. Please disconnect an reconnect the iPod, then try again. An unknown error occured (2005)."
    What does this mean? I have an iPod shuffle 4th gen but its not detected in itunes... it can only be seen in the device manager, but I can't see it on the task bar. Can anyone please help me?

    I have same error except that i get it even when my phone is not connected.

Maybe you are looking for

  • Opening Excel Workbook Fails when run from Scheduled Task on Windows Server 2008 Rw

    Hi, I have a little vbs script that instantiates the Excel.Application object and then opens a work book to perform some tasks on it. The script runs fine when run from the command line. When I attempt to run it as a scheduled task (it is supposed to

  • Java won't update - A newer version is already installed

    Hello all, I'm operating on a MacBook Air that i recently updated to OS X 10.9.2. Along with the update, Java 7 was installed. I need to have Java 6 Update 20 installed to use some programs on this computer for work. I've gotten the files to install

  • Can't use iMessage and FaceTime

    I upgrade my ipad2 and now I can't login to iMessage and face time, but I can still download apps with mi apple account

  • Cant get rid of product registration reminder

    it wont go away no matter if you register or say dont remind me again, i've tried uninstalling creative but its still there, and i cant get rid of the bit that i need to!!? is there a way to completely wipe anything to do with creative off your compu

  • Best way to transfer a List Object into a view object?

    Hi Guys and Gals, I'm working with some 3rd party code. This code queries a 3rd party database and returns the data into a List like so:         PlatformSessionContext context = webutils.getPlatformContext(accesstoken,accessstokensecret,realmID,dataS