Pro please help!!! high lvl problem(russian language)

Добрый День. Попробую подробно описать проблему на русском.
30.12.13 моя супруга подарила мне iPhone 5s, примерно в марте следующего года стала выскакивать табличка об авторизации в iCloud.
Я перепробовал несколько вариантов, пароли не подошли и с того раза я всегда жму "отмена", после 5го раза окно исчезает примерно на неделю.
И так продолжалось каждую неделю.
мой iCloud: [email protected], а в апсторе я числюсь как [email protected]
пароль на апстор я помню и потому у меня не было проблем с покупками.
Пока телефон не начал тупить и зависать. Я пробовал его перезагружать ничего не помогало, и как то наткнулся на ролик в ютубе и по глупости его повторил. Телефон сделал полное восстановление и теперь требует пароль от iCloud: [email protected]
Разумеется перед сбросом я пробовал сделать резервную копию и я ее сделал. за исключением покупок, там вылезла табличка что для этого необходимо синхронизировать телефон с компьютером, а этого мне сделать не удалось так как компьютер запрашивал пароль на iCloud: [email protected].
До перезагрузки я пробовал восстановить пароль через службу поддержки, НО письмо с инструкциями идет на почту iCloud: [email protected] куда у меня нет доступа. Оставался только вариант это вспомнить ответ на контрольный вопрос.
Вопрос простой: имя первого лучшего друга. Проблема в том что у меня был лучший друг в детстве, в юношестве и позже. Итого 4 кандидата.
Во первых имя "Дима" можно написать в нескольких вариантах начиная с первой заглавной, затем первой маленькой, на английской раскладке, с фамилией и даже кличкой. Но и это не помогло, я использовал все варианты четырех кандидатов, так же я мог использовать одно из имен своих двух собак, имя своего сына, его ласковое имя итд. Но проблема еще и в том, что дается всего 9 попыток, затем блокировка на 8 часов. И так изо дня в день.
На моем устройстве также есть игра Clash of Clans в которую закинуто не мало денег, и мне хочется ее вернуть, и я так понимаю что для это мне нужно войти под своим iCloud. Так как я пробовал входить через апстор на планшете, через аккаунт, от которого покупалась эта игра на мой айфон.
Помогите и подскажите что можно сделать, чтобы восстановить игру и телефон, который еще и в ремонт надо сдать.
Связь с контактным центром в России не помог, сделал 2 звонка общей продолжительностью 1,5 часа.
Если бы я хоть знал сколько букв в ответе или хотябы первую букву...
Спасибо, жду ваших решений, посмотрим на сколько я отстал.

have you tried the soundmax vista driver available from lenovo?
according to analog devices, drivers are only supplied by OEMs. XP64 isn't a supported OS on the S10 so you might be on your own. you could try searching for other manufacturer's drivers such as one from tyan that i found here.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Similar Messages

I cant connect my new wimax usb stick bm328 on my macbook pro. please help me

i cant connect my new wimax usb stick bm328 on my macbook pro. please help me

The Hardware Test detected a RAM problem. Take out the chips and make certain that the connections are clean and reinstall them. Make certain that they are well seated.
If the problem occurs again, test with one chip at a time. Also swap bays if necessary.
Please indicate if you have installed new RAM and if so what brand and the specifications.
Ciao.
Message was edited by: OGELTHORPE

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem.

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.

Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M.

Hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

[ETL]Could you please help with a problem accessing UML stereotype attributes ?

Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank you

Hi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana

HT1338 i lost my dvd and i want to install mac os on my macbook pro please help

i lost my dvd and one of my friends install a strange os can't update or install some apps please i want to install my mac os on my macbook pro please help ?

Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

I do not know why i can't open facetime,messages,reminders and appstore on my macbook pro, please help me out

i do not know why i can't open facetime,messages,reminders and appstore on my macbook pro, please help me out

I used cleanmymac for clean up files, always worked fine before maverick, now i used it yesterday and i can not open any kind of programs except google chrome , my last time machine back up was yesterday but according to him he can restore just complete back up and the last one is in october 2013, i am desperate .
i already tried to fix permits and press weird combos of buttons on restarting. not working.
please help

HT5312 i forgot my secret question, please help me this problem. Thanks

I forgot my secret question, please help me this problem. Thanks

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
And/or see the More Like This section on the right.

Please help me to change the language from Danish to swedish i PS CS5

please help me to change the language from Danish to swedish i PS CS5
In the program (interfaces) i can only choose Danish

There is nothing to choose. The language is determined by your serial number and the choice of language during installation. You need to reinstall in that language.
Mylenium

Please help with slideshow problems!

Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
Thanks

Thanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
>

Cookies problems on T61 Window's XP Pro,please help....liamo

Hello Forum.....I have deleeted some cookies (only 1kb trpes) individualy.... but cant delete them all, and the one's with 2,3,& 5kb's no chance.......Ive tried many ways & times but cant get there...please help....thanking you, yours sincerely, Liamo

Hi,
allright , lets talking about small workspace... instead of small cookies
even when your Windows XP works fine ,but should have enough room to breath...i.e. my install of XP with all needed programs
is 8 GB ..
double the workspace is the best . for temporary data... so the minimum of partition should be around 16GB
enought to hibernate (size depends on your installed memory) that could be 1-4GB Harddrive room.
Windows itself swap (if you dont set this of) every time from memory to harddrive...
Windows save from time to time (also if didnt set this off) the actual condition .needs room to save...
and many more...
So If something goes wrong...if you leave only 399MB on HDD free...
..you didnt leave enough space to save, you got broken data...if windows try to save ...
and restore isnt possible,caused by data loss, could be in bad case more that you want to loss...
I would prefer
save your personal data (docs,pics,music,video,sheets..)
to external harddrive or usb device.. to prevent of data loss.
Or buy a new larger harddrive ..if u use the default drive .. dont know your size of HDD,
my original was a small 60 /80 GB HDD not enough for me ... all my Thinkpads are equipped with 320GB HDD exept one with SSD 120GB...
all devided in 2 parts for Windows Part & Data storage..
Partition C: 30GB enough room for any actual system leaves 22 GB left XP uses 8GB ...
...second part D: for all of my data... and backup of system part ..
and have more than one external HDD for backup ...
Use CCleaner after daily work is done to keep the system small and fast and do a systembackup one time a week,
with Acronis Trueimage done in 5-10 Minutes.. from time to time i copy this datafile to the external drive..
so that i have a rescue backup in a few minutes...
iam on the save side ...
so what about yours ... do you think your Thinkpad will save ?
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

PLEASE HELP - COLOR SHIFTING PROBLEM on output NTSC monitors

http://www.smmlv.com/testproject/
Above is a link to a layered photoshop file that has a USA map and over a dozen network overlays used in a section of our video. I animate each layer on sepeartely in the video and have noticed a major problem recently, the color of the art does not hold true to placement. I created the art originally in Illustrator and then converted the file to Photoshop at 640x480, 72dpi. This has always worked perfectly in the past to display and animated artwork in FCP.
Right now, in FCP I am using the NTSC DV 3:2 frame size, and the compressor of DV/DVCPRO - NTSC. I have a JVC Profressional DV deck that hooks up through firewire and sends S-Video to my monitors. This setup has always given me a great picture even though it is not completely upcompressed. Using these settings and this art, the color lines on this map in red, light blue, yellow and purple all have a "color shift" to the left about 5 pixels. It makes it appear that the line is where it is in the file, but the color overlaying the line is offset to the left 5 pixels and transperant to about 50%. This occurs only when viewed on some TV's and NTSC monitors and projectors. The strange thing is, some monitors display the color aligned almost perfectly on these maps and other monitors and projectors show this "digital halo" of color shifting really bad. If I take the layered network overlays in these colors and color tint them to black or grey, white, light green, or even light orange, they no longer have the color shifting and the detail is perfect.
Is there any way to fix this problem? I have tried duplicating the sequence and setting the compressor to 8bit Uncompressed, and while my captured footage is not this compression, in theory the art should render at this higher resolution setting. This did nothing to solve the problem.
I also have tried using different Broadcast safe and Y/C corrector filters with different results. The Y/C filter allowed me to reposition the color problem and thus removing most of the problem, but also removing most of the color. Nothing else has allowed me to seemingly move the color into the proper possition.
What is causing this color shift on the displayed NTSC image?
In FCP 4.5 I can see my rendered video in the program viewer screen and besides the pixel compression appearing on the lines, overall the video looks great paused or even better when playing. Then you view it through my deck onto my Pro Sony NTSC 19" color monitor and it also appears great, with a slight color halo to the left of these colors, but the color in the lines are there. If you are a few feet from the screen and know what you are looking for you might see it, but doubtful. Then you view it using the same signal on a 17" Samsung TV and the color shifting makes the map and other art, like the clients blue logo, look horrible, with each color line appearing twice and offset left from each other as if you had double vision. Normally I would think it is the TV causing this, but then we tested this same movie on 2 differnt projectors. The $700 Epson projector displayed everything beautifully, again with only the slightest color halo to the left, but then the Panasonic $4000 projector made everthing in these colors look double vision again. What is going on???
One more thing to keep in mind, my color bars also show this problem with these colors as well as shot footage of these facilities. There are tall red poles in the shots and everything displays fine except for the red pole color looks like it's glowing off the pole to the left.
PLEASE tell me there is a solution to this.

I have tried Degaussing, using filters, changing cables, and testing other monitors and systems on these monitors, everthing I can think of to solve the issue. Is it FCPo or is it the monitors?... or is it a signal strength thing. Can monitors and projectors shift color when the signal is read from a DVD or Mini DV Deck? Is there a fequency difference (Ie: 75mgz or 80 mgz) that might be causing the shift in some monitors and not so badly in others. But if this was true, how would some DVD's (like Baby Einstein DVDs that use really bright colors) display red and blue perfect using these same player and monitor, while my projects is shifting color? Doesn't that rule out the signal from the DVD player if other DVD's do not have this issue?
I have uploaded the original art used, an exported .jpg file from the FCP timeline and sample photos of 2 different monitors to show to show this problem as best I can. http://www.smmlv.com/testproject/
Someone out there must have had this problem before. There's no way a color shift problem like this with Mini DV has gone on this long without someone seeing it.
One last thing about what I have tried... I do understand that with editing in Mini DV instead of uncompressed or HD video I lose a bit of resolution (4:2:2) and I see this compression occuring in some of the areas in the video where these problems persist. But, I did remake the art and rerender this project in an 8bit uncompressed settings and then displayed that up on the screen and I get the same color shift. I keep going in circles trying to find the culprit that is causing the delema.
PLEASE HELP! There are large tours going through our facilities daily and the large screen projector is displaying this problem as well. Let's just hope they don't notice and that their TV's at home or office does not display it on our final DVD's made.

Wireless Connection Issue Macbook Pro PLEASE HELP!

Hi
I got a brand new macbook pro 13' the other week, i installed everything etc and also my bt home hub 2 showed up in airport and it all worked fine no problem no matter where i was in the house.
Yesterday i tried to get on the Internet on the bottom floor and my router is on the 3rd floor and it won't connect to my Internet, it asked for the access key and then i get timed out message and then a message abut its the wrong key, out of range etc. I then go to the room with the router in or on the same floor and it connects and works fine, but soon as i move downstairs it does'nt work as it did before.
Ive reset the router, changed router channels to all of them, changed it to G, N etc and still no joy, also tried WEP and still no joy
Is this an issue with my mac or my router, my mac and router are n power why is suddenly not reaching the bottom floor when it did no problem before.
Please help
Sam

Macbook Pro and BT Homehub4. Looked for help here but did not find it, however, solved the problem by chance as below.
Problem - having recently installed Homehub4 Macbook was persistently refused access to the hub on the grounds that a password was required and the one keyed in was incorrect. An older iMac upstairs was fine - this was the one set up by the engineer when installing. Signal strength was at full.
Solution - found by chance that the Macbook worked ok from another room and concluded that the signal strength was just too high in the original position. By placing a biscuit tin in front of the hub the signal is sufficiently attenuated to work in the original room, and is still good enough to use the upstairs machine too.
So signal is too strong! I call that counterintuitive and I bet no help desk would think of it.
Regards, John.

Slow Macbook Pro- please help, I don't understand previous advice.

Hello all,
I have a very slow Macbook Pro running on Lion 10.7.3.
I looked up this problem on the forums before I sent this message but I didn't quite understand the advice. I have been on something called Disk Utility and Activity Monitor but don't really understand what I'm looking for. It seems a large percentage of my mac is 'idle' if that makes sense. Someone said to look at Page Out but I really don't understand what that means and what sort of numbers are normal.
I do have some storage left so I don't think it could be that. A lot of my gigabytes seem to be taken up by movies and 'other'. I've tried deleted a load of videos but it hardly made a difference. I have Mac Mail and it seems very slow on my Macbook compared to on my Ipad and iphone. iCal is also very slow on here and it always takes a while to load internet pages. It isnt the wifi connection.
Please help and bear in mind I am by no means a Mac whizz so you might have to talk in layman's terms!
Thanks,
Amy

If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
Launch the Console application in the same way as above, and select “kernel.log” from the file list. Post the dozen or so most recent messages in the log — the text, please, not a screenshot.
If there are runs of repeated messages, post only one example of each. Do not post many repetitions of the same message.

Error message when adding video to premiere pro, please help!

Hi there,
Every time I try and add a video to premiere pro I get an error message "There was an error decompressing audio or video." I made the video in After effects and it plays just fine but I wanted to add sound to it in premiere pro. The file is mpeg movie, I can get more info if needed, just let me know. I am not very experienced at all in adobe but i'm learning so if someone could please help, that'd be awesome? P.S i'm using a MAC

You're welcome.
I've never visited Paris but it is on my list.
I don't believe the 10.4.4 Update had anything to do with this. I also have a .Mac account and I didn't experience any problems sending with any of my accounts and different SMTP servers after installing the Update.
Something to try.
Go to the SMTP server settings for the .Mac SMTP server and in the Server Port field, enter 587 in place of 25 and when finished, select OK to save the changed setting.
Test if this resolves the problem.
Having the SSL warning message is odd if Use SSL is not selected for the SMTP server and if using 587 as the server port doesn't resolve the problem, this may be a Mail.app preference file problem which is the file that stores all account settings.

Pro please help!!! high lvl problem(russian language)

Similar Messages

Maybe you are looking for