Pro TAC display not working?

My Pro TAC (ink measurement) does not seem to be working properly. Does not see whole image. Anyone else seen this?

Do both of your computers have a firewire port on them?

Similar Messages

Thunderbolt display not working on Macbook Pro - previously the display did work

Thunderbolt display not working on Macbook Pro - previously the display did work

I have upgraded ML but when the MBP tries to restart with the upgrade the MBP does not restart so I susapect the ML upgrade is not complete ? When you refer to 10.8.5 supplemental is this a separate upgrade ? When I connect the Thunderbolt to the MBP the Thunderbolt charges my MBP & I can play music from iTunes via the Thunderbolt. It is only the display that is not working on the Thunderbolt

Logitech Quick Cam pro 9000 is not working with Mountain Lion's dictation

The Logitech Quick Cam pro 9000 is not working with Mountain Lion's dictation.
Opening the dictation system preference panel makes the system preferences crash...
The mic of that camera is the only mic I have.
I own a Mac Pro and an old Cinema Display which has no built-in cam/mic.
Anyone having the same issue?
I hope this is gonna be fixed with 10.8.1.

Hello, thank you for responding.
Unplug and plug in back the camera does not solve this problem. I tried that before.
But what worked was to start photo booth. Don't really know why.
So after every restart of the mac I have to start photo booth and dictation with the QuickCam is working. ^^

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

Tac pad not working correctly

tac pad not working correctly

I assume you mean "track pad?" If so, how is it not working? Be specific. If not, what do you mean?

I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?

I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7). What is the problem?

You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you. But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Final cut pro x dissolves not working

Final Cut Pro X, dissolves not working, When I use Ribbon, Heart ect, they showup on the video flickering, will not allow me to render the video, any help would be greatly appreciated.

Sorry. That should be what's the media? What are the project properties?

My macbook pro external speaker not working! help please

My macbook pro external speaker not working! help please

1. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
     Pllug in the speakers.
     Do they show up?
     Make sure that Mute is not enabled.
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Best.

Caller display not worked since June 2014

On 26/06/14 I reported a fault (VOL-**********) that the caller display function had stopped working following a thunderstorm in the area. According to the fault status this fault is showing as being corrected and closed on 02/07/14 when in fact the fault still exists. I tested the line using the BT test socket with a new BT2000 phone and this displayed ‘incoming call’ therefore my internal wiring is not part of the problem. I have also dialled the test code *#234# to check if the caller display service is available and confirmed that it is. I then tested the new BT2000 phone on the neighbour’s telephone line and this showed the caller ID for incoming calls, as did my other telephone as well; therefore none of the telephone handsets are at fault. Three times BT have informed me that the fault has been fixed and yet I still have no caller display. Reading through the forums it would appear that other people have encountered similar issues and that the problem is at the exchange, “An Openreach engineer discovered that the RS232 burst transferring the CLI number up the line was too weak and he then went down to the exchange to investigate. He then discovered that the fault lay in the ADSL device which lies between the analogue exchange equipment and the outgoing line”.
I’m surprised to see that BT are taking so long to trace a fault in their system last raised 5/8/2014 (VOL012-**********) and that they haven’t sent an engineer to the property or to the exchange to check the problem.
My patience is wearing thin over this problem with my Caller Display not working as it started in mid June. I’m also becoming less enthusiastic about BT and find it harder to recommend them to others.
My last message from BT, tells me that it should be back to normal on the 8 August. However, it is still not working. Their message that my phone should be back to normal now and if it isn’t report this to BT, is ridiculous. If an engineer had investigated what was causing the fault and found it, then he would have fixed it. However, either an engineer has not investigated the fault or BT is not competent in fixing their own service faults and makes these statements with crossed fingers?

An engineer called yesterday and told me that he had been asked to test the line for a voice fault not a Caller Display fault. However, his testing revealed there is no line fault, CLI signal is strong and he was happy that the new BT2000 phone (bought after the lightning strike) is working properly. (This phone had also been tested on a neighbour’s phone line where it displayed the callers number). He also found that this same BT2000 phone on my line was not displaying the Caller’s number (CLI), but couldn’t offer any reason why.
I conjectured with him that these tests must bring the problem down to a corrupted CLI signal which does not allow the phone to understand the phone number being sent.
When the lightning struck the phone line back in June, it blew the telephone connection in the back of the Sky Box with a flash and bang (telephone cable now removed from the Sky box). It shorted the Openreach Faceplate (now replaced) so that the phones and broadband stopped working and it caused the phone to light up and react as it does when a call comes through.
Now isn’t it possible that the lightning also travelled along the copper wire to the green cabinet just outside the house and damaged something there which is corrupting the CLI signal, but which does not not show up when the voice line is tested? If not, then there must be a problem further back in the infrastructure, possibly in the Exchange, that is causing a corrupted signal to be sent to my phone?
He told me that another team would have to investigate the Caller Display fault as he was instructed to look into a voice issue and as a field engineer he was not able to investigate any problem that might be in the Exchange. I don’t know whether this Exchange Team would be able to investigate a problem in the Cabinet if nothing is found in the Exchange or can that only be done by a field engineer? He told me to contact BT again as he’d done all that he had been instructed to do and they would have to instigate a fault team to further investigate the problem.
When all this is considered we have the basic problem that BT are unable to provide me with a Privacy and Caller Display Service that I have been paying for, because of a fault in their infrastructure. How much longer is it going to take before they correct the problem that’s been going on since June 2014?

World tv pro HD is not working what do i do

World tv pro HD is not working what do i do

I contacted Apple tonight and made them aware of the issue. They refunded me my money but said that no one had contacted them on this issue and the more people who contact them the more they can do. So we need all 600 people who have commented in the App Store reviews to call Apple so they remove this complete Scam from their system. Yes, I agree they should be doing this themselves but get your money back and make this an issue. Apple should be VERY concerned when World TV is #5 paid app and Pages and GarageBand are the next two respectively.
jp

Display not working

Hi,
I am using Lenovo G510 Laptop. First I was getting an error of bad signature file which was stopping windows from loading.
I tried to fix it. I changed my BIOS Boot mode from UEFI to Legacy, and then system restarted. After the restart Display is totally black, like the Laptop is powered off. Hard disk light is on, battery power light also turns on when I turn on the laptop. But not showing any display. I've also tried by pulling out the battery and then pressing the power button for 30-60 seconds and then turning laptop on direct power. But it ain't working too.
Please any help in this matter will be highly appreciated.
Regards

Dear sir,
I gave my laptop to an HP authorized service centre in Ernakulum (Vertex techno solutions Bangalore Pvt ltd, Ernakulum) No: 2550, on 04/12/2014 . Same time i registered my laptop complaint in hp customer support. http://h30434.www3.hp.com/t5/Notebook-Hardware/display-not-working/td-p/4760312, informed me that no complaint to MB and GPU . But service centre informed that complaint in motherboard and asked me to change. When I talk them about the your mail and the details that you provided they suddenly respond they can't repair the laptop at their service center, disconnected the phone. I feel very much disappoint about your authorized customer services. In the mean time I kindly request you to take immediate actions regarding these kind of activities also provide a solution to repair my lap top
Shyju S
Research Fellow

My macbook pro retina is not working camera after updating Mountain lion.

My macbook pro retina is not working camera after updating Mountain lion.
I have also updated to latest update 10.8.1. Still its the same.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

Either the power brick is damaged, or the charging circuit is on the blink, or both. Either way, a trip to the Apple Store or the Apple Authorized Service Provider is in order, as this ain't no bargain basement toy.
In the meantime, can attempt an SMC Reset to see if it helps.

The keys on my mac book pro (2009) are not working properly, both letters and numbers. I think I pressed something,but I cannot find a numlock key or other to undo this problem

Both the letters and numbers on my mac book pro (2009) are not working correctly, but the caplocks key still lights up,the delete key is like a back key,the o key is enter,etc. I think I must of pressed a button but I cannot find numlock or the action to fix it back to normal.
Need Help Please

Try this. Open one of your files. The window that contains your picture is named at the top. Command click on the name and you'll see the entire path starting with its name and then moving to the folder, the folder it is contained in, etc all the way to down to the hard drive volume name. This should tell you where to find the folder.

External Display not working (descriptive details in post)

Hello
Background:
I have been using a black Macbook (last year's model - before the aluminum ones came out) and connecting it to a VIZIO VW22L HDTV10T (television/monitor) via a mini-DVI to VGA adapter.
This setup always worked, although it was a bit finicky (I'd have to plug it in before closing the display to get in to work in clamshell mode, for example). I get the feeling from reading other forum posts that this is the normal case, though (which so far has been my only real gripe with OS X).
Anyway, back a couple months ago I wondered if this finicky-ness was partially caused by a messed-up preference file, so I decided to try and fix this. In the ensuing tweaking, I somehow caused my Display preferences to disappear.
After much effort trying to fix the problem, I eventually called Apple support, which ultimately recommended that I reinstall OS X. I didn't do that, and continued to work at the problem. I eventually was able to bring it back by going into my Time Machine backups and restoring all the Display preference files (I used old preferences from back when I got the external HD, so I knew they'd be "uncorrupted). However, now I'm having problems with my external display, namely that it is not working.
This problem started early this year, so it might have been caused by the 10.5.5 update, but since I had all these other problems going on, I'm not sure if that was the case.
Problem:
The Macbook doesn't seem to recognize the display, or is having problems routing video to the display, or something.
If I plug the display into the Macbook while it is running normally, the Macbook LCD will flash blue (like it picked up a new display), but them come back to normal. The monitor will go out of sleep mode for a second, but then display a "No signal" message. If I attempt to "Detect Displays" the Macbook screen will either flash blue (as before) or just do nothing.
If I have the display plugged in when I start up the Macbook, everything will proceed as normal until the time the desktop would be displayed. Instead of this, I just see a blue screen (like some generic desktop before any background is applied). The menu bar, the dock, and icons do not show up. However, I can hear various audio cues telling me the computer is running fine except for htis problem (email notifier going off, etc.).
I know the problem is not faulty hardware, because when I boot my Macbook into Windows, everything works perfectly. It therefore follows that it is an OS X problem. I downloaded both Cocktail and Applejack and run various repairs on them (most notable repairing preferences), but nothing has changed.
Any suggestions about how to try fixing this? If there's any technical detail I've missed, let me know.
Thank you in advance to everyone who tries to help.
-Richard

I have same problem. MacBook Pro (new, 2014) upgraded to Yosemite. Had been running with ViewPoint high-resolution, 27" monitor, HDMI. I tried Thunderbolt connection -- it connected, but it would not allow the external monitor to run at its native resolution (2560x1440). It would only display properly using HDMI. Just 3 days ago after I installed the latest OSx software update, and my external monitor problems started. On startup, my MacBook screen flickers non-stop. I can fix problem eventually (after several tries) by disconnecting the HDMI cable, turning OFF the external monitor power, turning external monitor back ON and then plugging in the HDMI to my MacBook Pro. This is very inconvenient.
I will try using the Thunderbolt cable. When I tried it in the past, it connected, but it wouldn't display the native resolution of my external monitor (which is 2560x1440). Can only get this resolution now with HDMI.

Pro TAC display not working?

Similar Messages

Maybe you are looking for