Prob during creation of info package

When I create an info package by right clicking on the data source, the master data object name is shown and I say save and it is not coming up in the data selection tab of the info package while creating....what could be the error...pl. help
thanks
Dora

Hi Jr,
The info package is fetching the data and I see the data in the PSA, but further when I am trying to create a DTP, and get the flat file master data into the attributes, it is not fetching it properly. DTP is getting created but, the data is not in the attributes.....also when I see the monitor it shows:
Prepare for Extraction
Data Package 1 ( 3 Data Records )
Extraction DataSource ZDS_TEST : 3 Data Records
Filter Out New Records with the Same Key : 3 -> 3 Data Records
RSDS ZDS_TEST ZSS_TEST -> IOBJ ZCUST1 : 3 -> 3 Data Records
Updating attributes for InfoObject ZCUST1 : 3 -> 0 Data Records
pl. let me know what the prob. is....
Thanks
Dora

Similar Messages

Error during creation of info record for pipline material.(Urgent)

Hi All,
We are getting the following error during creation of Info record for pipeline material
" Material XXXXX is not a pipline material"
we have checked the material master and found it is a pipeline material.
Kindly advice on the same.
Help in any form will be rewarded.
Best Regards
Arihanth

Hi Arahanth,
The steps u need to check are;
1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
2) when u create the info record (ME11) ensure the info category is selected as pipeline.
Hope its clear to u
if solved do reward me points
Regards
Anil Thai

Urgent,: Info package prob in process chain creation..

Hi Experts,
I wanted to create a process chain for my master data, so then i started creating it, initially when i started executing info package which is the first step to undertake, the list of info packages is not generating when in clicked upon search icon. Rather it says "no data selected". Am not familiar in creating process chains. This is the first time i started creating.. Could you plz assist me with clear information in how to resolve this?
Thanks.

Hi,
Check this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
/people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
/thread/471435 [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80a35cb9-fc1c-2a10-cfa8-94b94e5ac7a9
documentation about the complete sap-proces-chain
Kind Regards,
Arun.M
Edited by: M Arun on Jan 10, 2008 4:06 PM

Process Chain error during info package execution

I'm trying to load master data into 0CURTYPE using process chain.
I have created a start process and included the info package and corresponding DTP in the chain to load master data into the info object.
On scheduling the process chain I get an error during the execution of the info package
"Could not find code page for receiving system
For the logical destination Q4900CL010, you want to determine the code page in which the data is sent with RFC. However, this is not currently possibe, and the IDoc cannot yet be dispatched."
Is it relatred to some setting whihc I have missed out?
Any help on this please?
Thanks,

Hi, this is a issue related to idocs in the source....
U can contact ur BASIS team to solve this...
From their end they have to chk the unprocessed/errored idocs in BD87...
this issue belongs to source...
They have to run a report:RBDAGAIN to process the errore idoc's in the source which are in STATUS:'02'.
This is a solution for temporarilrly basis...
if this occurs regularly they have to change the settings in SM59..
refer exact note for this: 784381
rgds,

Delta info Package creation in Production

Dear BI Gurus
I just want to know whi is the better approach for delta update in production.
1. creation of delta info package on production server?
2. or transport from development .
if this is yes then what precautions we have to take ?
Regards,
Shilpa

Hi Shilpa,
If you have the necessary authorisations, you can create InfoPackages in Production. However, it is always preferable to transport them from Development in order to maintain synchronisation between the systems.
As an example, imagine if you're transporting a Process Chain from Dev. to Production. In this case, if you've created an InfoPackage directly in Production, the technical names of the InfoPackages in the Process Chain and those in the Production system wont match and you wont be able to activate the process chain unless you transport the InfoPackage from Development.
However, if you need to create an ad-hoc InfoPackage or there is some sort of urgency, you can create the InfoPackage in Production itself.

******Creation of a loading selection for cube in info package level

Hi,
when we are scheduling the info package(Infp package name is like XYZ),we want to load past 6 months data from the current date(INFO OBJECT(0CREATEDON) BETWEEN (Sy-Datum - 6 months TO Sy-Datum),in the selection tab in schedule i want to write the abap routine (type 6).please can any one have this type of code please sedn to me asap.
this is very urgent.delivery is tomorrow.
Regards
lekha

hi Lekha,
try
data: l_idx like sy-tabix,
l_month(6) type c,
l_dtlast6month like sy-datum.
read table l_t_range with key
iobjnm = '0CREATEDON'.
l_idx = sy-tabix.
DELETE l_t_range
WHERE iobjnm = '0CREATEDON'.
L_t_RANGE-SIGN = 'I'.
L_t_RANGE-OPTION = 'EQ'.
if not work, try
L_t_RANGE-OPTION = 'BT'.
BT = between
current month
concatenate sy-datum3(2) sy-datum0(4) into l_month.
L_t_RANGE-HIGH = l_month.
last 6 month
clear l_month.
l_dtlast6month = sy-datum - 180.
concatenate l_dtlast6month4(2) l_dtlast6month0(4) into l_month.
L_t_RANGE-LOW = l_month.
append l_t_range.
modify l_t_range index l_idx.
p_subrc = 0.
$$ end of routine - insert your code only before this line -
endform.
Re: routine as selection in infopackage
Re: routine as a selection in infopackage 2. Paolo Siniscalco and A.H.P
Re: abap routine

Info Package ABAP Routine

Hi
For FIGL_4 there is both open items and closed items. i want to filter only Open Items Accounting doc no's records for Customers,Vendors,GL account at info package level.
There are 3 ODS's in BW side for Open items Customers,Vendors,GL accounts. i want to filter open items based on these 3 ODS's Active data table.But i am getting error when i execute the request in Info Package.
*Error Message "For sel. field 'BELNR ', no selection with SIGN = ' '; OPTION ' ' allowed     RSM1     607     *
Below is the Info package Routine code
program conversion_routine.
Type pools used by conversion program
type-pools: rsarc, rsarr, rssm.
tables: rssdlrange.
Global code used by conversion rules
$$ begin of global - insert your declaration only below this line -
TABLES: ...
TABLES: /BIC/AZOCFFIGL00,/BIC/AZOCFBSID00,/BIC/AZOCFBSIS00
        ,/BIC/AZOCFBSIK00.
DATA:   ...
TYPES : BEGIN OF TY_ZOCFBSID,
        /BIC/ZMCFADCNO LIKE /BIC/AZOCFBSID00-/BIC/ZMCFADCNO,
        END OF TY_ZOCFBSID.
TYPES : BEGIN OF TY_ZOCFBSIS,
        /BIC/ZMCFADCNO LIKE /BIC/AZOCFBSIS00-/BIC/ZMCFADCNO,
        END OF TY_ZOCFBSIS.
TYPES : BEGIN OF TY_ZOCFBSIK,
        /BIC/ZMCFADCNO LIKE /BIC/AZOCFBSIK00-/BIC/ZMCFADCNO,
        END OF TY_ZOCFBSIK.
DATA : TB_ZOCFBSIS TYPE TABLE OF TY_ZOCFBSIS WITH HEADER LINE,
       WA_ZOCFBSIS TYPE TY_ZOCFBSIS.
DATA : TB_ZOCFBSID TYPE TABLE OF TY_ZOCFBSID WITH HEADER LINE,
       WA_ZOCFBSID TYPE TY_ZOCFBSID.
DATA : TB_ZOCFBSIK TYPE TABLE OF TY_ZOCFBSIK WITH HEADER LINE,
       WA_ZOCFBSIK TYPE TY_ZOCFBSIK,
       FLAG TYPE I.
$$ end of global - insert your declaration only before this line   -
    InfoObject      = ZMCFADCNO
    Fieldname       = BELNR
    data type       = CHAR
    length          = 000010
    convexit        = ALPHA
form compute_BELNR
tables   l_t_range      structure rssdlrange
using    p_infopackage type rslogdpid
           p_fieldname    type rsfnm
changing p_subrc        like sy-subrc.
      Insert source code to current selection field
$$ begin of routine - insert your code only below this line        -
data: l_idx like sy-tabix.
          read table l_t_range with key
               fieldname = 'BELNR'.
          l_idx = sy-tabix.
       SELECT
       /BIC/ZMCFADCNO
       FROM /BIC/AZOCFBSID00
       INTO TABLE TB_ZOCFBSID.
        SELECT
        /BIC/ZMCFADCNO
        FROM /BIC/AZOCFBSIK00
        INTO TABLE TB_ZOCFBSIK.
        SELECT
        /BIC/ZMCFADCNO
        FROM /BIC/AZOCFBSIS00
        INTO TABLE TB_ZOCFBSIS.
       LOOP AT TB_ZOCFBSID INTO WA_ZOCFBSID.
       l_t_range-sign = 'I'.
       l_t_range-option = 'EQ'.
       l_t_range-low = WA_ZOCFBSID-/BIC/ZMCFADCNO.
       Append l_t_range.
       CLEAR l_t_range.
       ENDLOOP.
       LOOP AT TB_ZOCFBSIK INTO WA_ZOCFBSIK.
       l_t_range-sign = 'I'.
       l_t_range-option = 'EQ'.
       l_t_range-low = WA_ZOCFBSIK-/BIC/ZMCFADCNO.
       Append l_t_range.
       CLEAR l_t_range.
       ENDLOOP.
       LOOP AT TB_ZOCFBSIS INTO WA_ZOCFBSIK.
       l_t_range-sign = 'I'.
       l_t_range-option = 'EQ'.
       l_t_range-low = WA_ZOCFBSIS-/BIC/ZMCFADCNO.
       Append l_t_range.
       CLEAR l_t_range.
       ENDLOOP.
          modify l_t_range index l_idx.
          p_subrc = 0.
$$ end of routine - insert your code only before this line         -
Edited by: AtulMohan Mishra on Dec 27, 2010 1:11 PM

Hi
Now i am facing an error during data extraction from Source system
error message in BW system "Error occurred in the data selection " Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
when i checked in SM37 (R3 system) i found the job has been cancelled and Log of this job says
"Asynchronous sending of InfoIDOCs 2 in task 0001 (0 parallel tasks) DATASOURCE = 0FI_GL_4
ABAP/4 processor: SAPSQL_WHERE_CANT_SCAN
Job cancelled      "
it seems to me the Problem in Routine at Info Package level.
My Requirement is to fetch only those Accounting Doc. No. RECORDS from 0FI_GL_4 data source which are present in Active data table of BSID,BSIK,BSIS ODS's.
So i want to put logic at Info Package routine .
1) fetch all Accounting Doc. No. from Active data table of BSID,BSIK,BSIS Ods's and Match those Accounting Doc. No.'s with the 0FI_GL_4 data source Accounting Doc. No's.if a Accounting Doc. No. match with 0FI_GL_4 data source Accounting Doc no then that corresponding record from 0FI_GL_4 will go to the ODS
Regards
Atul

Dump error while creating or double click the info package

Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
Steve

Here are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks.

Installation error during creation of user SAPJSF

Hello,
i'm performing SOLMAN installation and the installation stops in "Import Abap" step with problem creating the SAPJSF user. Several posts regarding the same error did not helped. When the sapinst is trying to create the SAPJSF user, i notice that the DB2 service in Windows services changes from "started" to "stopped"
OS:windows 2003 enterprise 64bit
DB:db2 udb
SOlman: 7.0 including EHP1
The error from "sapinst.log":
WARNING 2010-09-17 10:32:40.906
Execution of the command "I:\usr\sap\SOF\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install\lib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install\sharedlib;C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\DB6\CENTRAL\AS\install" -c sysnr=00 -c ashost=fmgrsolman -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -user_type system -message_file UserCheck.message" finished with return code 4. Output:
Sep 17, 2010 10:30:29... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Sep 17, 2010 10:30:30... Info: Connected to backend system SOF client 001 as user DDIC
Sep 17, 2010 10:30:30... Info: Called for user SAPJSF
Sep 17, 2010 10:30:30... Info: Formal password check successful
Sep 17, 2010 10:30:30... Info: Will create user SAPJSF
Sep 17, 2010 10:31:38... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
Sep 17, 2010 10:32:40... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????
     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
     at com.sap.security.tools.UserCheck.resetJCOClient(UserCheck.java:2479)
     at com.sap.security.tools.UserCheck.deleteUser(UserCheck.java:2024)
     at com.sap.security.tools.UserCheck.main(UserCheck.java:300)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:331)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Sep 17, 2010 10:32:40... Info: Leaving with return code 4
The error from "UserCheck.log":
Sep 17, 2010 10:36:58... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Sep 17, 2010 10:36:59... Info: Connected to backend system SOF client 001 as user DDIC
Sep 17, 2010 10:36:59... Info: Called for user SAPJSF
Sep 17, 2010 10:36:59... Info: Formal password check successful
Sep 17, 2010 10:36:59... Info: Will create user SAPJSF
Sep 17, 2010 10:37:59... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
Sep 17, 2010 10:38:56... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: 00024No connect to database, session terminated??????????????????????????
     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
     at com.sap.security.tools.UserCheck.resetJCOClient(UserCheck.java:2479)
     at com.sap.security.tools.UserCheck.deleteUser(UserCheck.java:2024)
     at com.sap.security.tools.UserCheck.main(UserCheck.java:300)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:331)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Sep 17, 2010 10:38:56... Info: Leaving with return code 4
Edited by: DimitrisDimas on Sep 20, 2010 5:38 PM

hi
wat s ur JDK version??
please refer this,
[SAPJSF - no password for user - ECC6 - IDES|SAPJSF - no password for user - ECC6 - IDES]
jansi

RC-00118: Error occurred during creation of database Raised by oracle.apps.

Hi Experts,
Please note i am doing the clonning from production to test server.
Production Server -
1. Run the adpreclone.pl on the apps & db tier.
2. run the autoconfig on the apps and db tier.
3. shut down the production instance.
4. Moved the files and started the clonning process on the db tier i am getting the below issue.
My current E-Business Suit Version is R12.0.4 Database Version is 10.2.0.3. Operating system is SUN SPARC 64 BIT SUN SOLARIS 10.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Mar 21 18:09:54 WAT 2012
The environment settings are as follows ...
ORACLE_HOME : /erptestdata2/u01/d01/tech_st/10.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /erptestdata2/u01/d01/tech_st/10.2.0/perl/bin:/erptestdata2/u01/d01/tech_st/10.2.0/bin:/usr/ccs/bin:/usr/sbin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/usr/sbin:/usr/bin:/opt/EMCpower/bin:/etc/emc/bin:/etc:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,SPARC-Enterprise/sbin:/opt/sun/bin:/opt/SUNWexplo/bin:/opt/SUNWsneep/bin
LD_LIBRARY_PATH : /erptestdata2/u01/d01/tech_st/10.2.0/lib:/usr/dt/lib:/usr/openwin/lib:/erptestdata2/u01/d01/tech_st/10.2.0/ctx/lib:/erptestdata2/u01/d01/tech_st/10.2.0/lib32
Executable : /erptestdata2/u01/d01/tech_st/10.2.0/bin/sqlplus
The log information will be written to
     /erptestdata2/u01/d01/tech_st/10.2.0/appsutil/log/TEST_proddb/adcrdb_TEST.txt
Creating the control file for TEST_proddb database ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:09:54 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size          2035496 bytes
Variable Size          432017624 bytes
Database Buffers     624951296 bytes
Redo Buffers          14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size          2035496 bytes
Variable Size          432017624 bytes
Database Buffers     624951296 bytes
Redo Buffers          14737408 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4168
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size          2035496 bytes
Variable Size          432017624 bytes
Database Buffers     624951296 bytes
Redo Buffers          14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:10:16 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
Please advise ASAP.
Regards
Mohammed.

Nikki,
Check alert<SID>.log file for more details about the error.
It looks like that the source database was not cleanly shutdown before copying the files to the target node. Please do the following and check then:
SQL> connect / as sysdba
SQL> startup mount;
SQL> recover database using backup controlfile until cancel;
-- type CANCEL
SQL> alter database open resetlogs; If the above does not help, then shutdown the source database normally (make sure it is down), re-copy the files and start the cloning process again.

Error during creation of application entity for the plug-in.

Hi Experts,
As part of creating Content Database source for SES....
We,
1 Activated the Oracle Internet Directory identity plug-in for the Oracle Content
Database instance.
2) However after activating Identity plug-in for Oracle Internet Directory.... ......... we used the csPlugin.ldif file to create an application entity for the plug-in by running the following command "$ORACLE_HOME/bin/ldapmodify -h oidHost -p OIDPortNumber -D "cn=oracle" -w password -f csPlugin.ldif" ....but in the process executing the above command.... getting the following error(we gave correct login details):
SASL/DIGEST-MD5 authentication started
ldap_sasl_interactive_bind_s: Invalid credentials (49)
How can i resolve this.
I have another query...in the command "$ORACLE_HOME/bin/ldapmodify -h oidHost -p OIDPortNumber -D "cn=oracle" -w password -f csPlugin.ldif" which user name should i specify..... is it "cn=oracle" or "cn=orcladmin"
Thanks
peter.

Hi Raford,
Thanks for your reply.
We tried to create Content Database Source with the details we have...
However in this process getting an exception....
11:20:20:778 INFO     main
11:20:20:784 INFO     main          Oracle Secure Enterprise Search, Crawler: Release 10.1.8.2
11:20:20:785 INFO     main          Copyright © 2006, 2007, Oracle. All rights reserved.
11:20:20:785 INFO     main
11:20:20:785 INFO     main          ================== Crawling settings ==================
11:20:20:785 INFO     main          Reading configuration file from /mnt/u08/SOADEVIL/seshome/search/data/config/crawler.dat
11:20:20:785 INFO     main          Agent = Oracle Secure Enterprise Search
11:20:20:807 INFO     main          User = EQ_TEST
11:20:20:807 INFO     main          Database connect string = jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=devilrays.appsassociates.com)(PORT=1525))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=Devilses.devilrays.appsassociates.com)))
11:20:20:807 INFO     main          Source type is User-defined
11:20:20:807 INFO     main          Source is "BJ_Cont"
11:20:20:807 INFO     main          Document access control policy is user-defined
11:20:20:808 INFO     main          Number of crawling threads = 5
11:20:20:808 INFO     main          Queue table = I1S8
11:20:20:808 INFO     main          URL table = EQ$URL
11:20:20:808 INFO     main          Maximum documents to crawl = no limit
11:20:20:808 INFO     main          Maximum depth to crawl = 2
11:20:20:808 INFO     main          Document size limit = 10M
11:20:20:808 INFO     main          Locale of the crawler message is "en_US"
11:20:20:808 INFO     main          URL exclusion rule = (?i:(?:\.gif)|(?:\.jpg)|(?:\.jar)|(?:\.tif)|(?:\.bmp)|(?:\.war)|(?:\.ear)|(?:\.mpg)|(?:\.wmv)|(?:\.mpeg)|(?:\.scm)|(?:\.iso)|(?:\.dmp)|(?:\.dll)|(?:\.cab)|(?:\.so)|(?:\.avi)|(?:\.wav)|(?:\.mp3)|(?:\.wma)|(?:\.bin)|(?:\.exe)|(?:\.iso)|(?:\.tar)|(?:\.png))$
11:20:20:808 INFO     main          URL exclusion rule = \?.*(.*\+)\1{3}
11:20:20:812 INFO     main          Document read timeout threshold = 30 second(s)
11:20:20:812 INFO     main          Crawler default character set is "8859_1"
11:20:20:812 INFO     main          Crawler default language is "en"
11:20:20:813 INFO     main          Auto language detection is on
11:20:20:813 INFO     main          Auto character set detection is off
11:20:20:813 INFO     main          Document service pipeline is "Default pipeline"
11:20:20:813 INFO     main          Verbose mode is on
11:20:20:935 INFO     main          Caching on: directory = /mnt/u08/SOADEVIL/sesdata/Devilses/cache/I1DS8/, max size = 250, action = SES_TASK
11:20:20:935 INFO     main          Filtering on: filter path = /mnt/u08/SOADEVIL/seshome/ctx/bin/ctxhx, number of filters = 2
11:20:20:935 INFO     main          MIME inclusions = text/html text/plain application/pdf application/x-msexcel application/vnd.ms-excel application/ms-excel application/x-mspowerpoint application/vnd.ms-powerpoint application/msword
11:20:20:935 INFO     main          URL table attributes = url, depth, signature, last_modified, status, url_id, access_url, enqueue_status, TITLE, DESCRIPTION, AUTHOR, CRAWLED_DATE, CONTENT_LENGTH, CONTENT_TYPE, LANG, CACHE_FILE_PATH, DS_ID
11:20:20:936 INFO     main          SQL callback statement is "begin eq_crw.crawler_callback(?,?,?,?); exception when eq_def.search_error then eq_err.raise; when others then eq_err.raise; end;"
11:20:20:936 INFO     main          Cookie support is enabled
11:20:20:937 INFO     main          Maximum number of cookies = 300
11:20:20:939 INFO     main          Maximum number of cookies per host = 20
11:20:20:939 INFO     main          Maximum size of cookie = 4096 bytes
11:20:20:940 INFO     main          Cache file deletion is disabled
11:20:20:940 INFO     main          Crawler plug-in manager class is "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
11:20:20:940 INFO     main          SQL hook ID is "8"
11:20:20:940 INFO     main          SQL command hook statement is "begin ? := eq_crw.crawler_get_command(?,?,?,?); end;"
11:20:20:940 INFO     main          SQL response hook statement is "begin ? := eq_crw.crawler_send_response (?,?,?,?,?,?,?,?,?,?,?,?,?); end;"
11:20:20:940 INFO     main          Crawler launched by schedule "BJ_Cont"
11:20:20:940 INFO     main
11:20:20:940 INFO     main          =================== Crawling status ===================
11:20:20:941 INFO     main          Crawling started at 9/18/07 11:20 AM
11:20:21:912 INFO     main          URL manager connecting to Oracle...
11:20:21:974 INFO     main          connected
11:20:22:586 INFO     main          Queue manager connecting to Oracle...
11:20:22:631 INFO     main          connected
11:20:23:497 INFO     main          Invoking "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
11:20:23:501 INFO     main          URL manager connecting to Oracle...
11:20:23:529 INFO     main          connected
11:20:23:531 INFO     main          Initializing crawler plug-in manager "oracle.search.plugin.ocs.cservices.OCSCSPluginMgr"
11:20:23:531 ERROR     main          SES keystore location: null
11:20:23:532 ERROR     main     null oracle.search.sdk.crawler.PluginException     oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:getParamValue:351     oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:init:479     oracle.search.crawler.WebCrawler:begin:1076     ImtCrawler:run:1831     ImtCrawler:main:480
11:20:23:532 ERROR     main     null oracle.search.sdk.crawler.PluginException     oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:getParamValue:351     oracle.search.plugin.ocs.cservices.OCSCSPluginMgr:init:479     oracle.search.crawler.WebCrawler:begin:1076     ImtCrawler:run:1831     ImtCrawler:main:480
11:20:23:676 INFO     Thread-1          Remote command "reportstatistics" received, argument = "quit"
11:20:23:676 INFO     Thread-1          Executing remote command "reportstatistics"
11:20:23:697 INFO     Thread-1          Send back remote command execution result
11:20:25:944 INFO     main          Shutting down all crawling threads...
11:20:25:948 INFO     main
11:20:25:949 INFO     main          =================== Crawling results ===================
11:20:25:949 INFO     main          Crawling started at 9/18/07 11:20 AM
11:20:25:949 INFO     main          Crawling stopped at 9/18/07 11:20 AM
11:20:25:949 INFO     main          Total crawling time = 0:0:5
11:20:25:949 INFO     main
11:20:25:954 INFO     main          Total number of documents fetched = 0
11:20:25:954 INFO     main          Document fetch failures = 0
11:20:25:954 INFO     main          Document conversion failures = 0
11:20:25:954 INFO     main          Total number of unique documents indexed = 0
11:20:25:954 INFO     main          Total data collected = 0 bytes
11:20:25:954 INFO     main          Total number of non-indexable documents = 0
11:20:25:955 INFO     main
11:20:25:955 INFO     main          Number of times disk cache is full = 0
We have followed the installation details provided in "SESAdmiistratorGuide".
In that guide.... during creation of Content Database source he did not mention any entry for "SES keystore location", and the exception which we are getting is related to "SES keystore location: null" (please look into the exception stack).
could you please guide us.
Thanks
peter.

Update VBUP-FKSTA (billing relevancy) during creation of invoice

Hi,
We pack items in a delivery. Due to this an extra item is added to the delivery with a ZPAC item category. This item category is set as billing relevancy.
We have created a requirement in copy control that we only want these items in the intercompany invoice, and not in a regular invoice F2. The invoice is created for the customer without the packaging materials and the intercompany invoice has all the items. This requirement is only in a specific scenario for only one shipping point. The customer does not need to pay for the packaging materials, but the intercompany sales organization does.
Now the delivery is still open because the billing relevancy is 'A' (vbuk-fksta), but we actually do not copy it to the invoice. The billing relevancy for the intercompany (vbuk-fkivp) is set to 'C'. We would like to set the vbuk-fksta automatically (if possible) during creation of the F2 invoice to 'C'.
We know transaction VL_COMPLETE we can do this manually.
I tried some user exits but at the moment I can not find the routine where it actually updates this status. And whether there is a user exit (or enhancement) possible to influence this ourselves, so we do not need to update this by hand.

Hi
KIndly check the oss note 445763 it may help you
or
write the code with the help of ABAPER by selecting and updating the below tables
VBFA, VBUP & VBUK
Regards
Damu

Problem during creation of hierarchy

hai gurus,
my problem is while creating hierarchy on particular char InfoObject
it will shows an error "The import parameters were not filled correctly"
in a pop box.
how can create a hierarchy pls help me.

Hi DJR,
here the procedure for creating Hierarchy through the flat file..go through it. istill if u have any concerns please update in sdn..
     Hierachy through flat file
     First create a flat file save as in .CSV format. Then close the file.
       Create info area in info object then info object catalog opens then create it then info object screen opens then another screen opens were you will give data type, length then select option hierarchy tab, then select it simply select the check box with hierarchies.
        Select attribute tab in that name, age, address, phone then activate it then come back to the main screen then select characters right click a small screen open then select info object then a small screen opens then create sales region and activate it.
     Then return back to the main screen then click characters right click on it then a small window opens then select info object option & create sales office and activate it.
     Then return to the main screen then select characters then the ID then the double click on it then the other screen opens select hierarchy tab then select external chars in hierarchies then click on it then other screen opens then select find tab then give the sales region info object name and click continue then it finds the name.
     The name would be scroll on the other screen then the office should be find the same way as region then office would be scroll on the other screen then continue and activate it.
     Then come back to the main screen then go to info source option then it opens then create application component then it opens other screen then click continue it
     Then create info source for master data then select direct update option there give the name of the info object of as ex; YID_AS2 then click continue.
     Then the YID_AS@ could be seen in the main screen then right click on it. Then a small option opens then click assign data source option then other screen opens there it gives the empty space double click on it then PC file then click continue then another window opens click continue then again screen opens click continue again a pop up screen opens click continue.
     Then another screen opens there the attribute data source then activate it then select hierarchy activate it then the left side data structure/ hierarchy then click on it then it opens another screen then click hire maintenance button .
     Then give the hierarchy name (your wish) then go with continue then yes then save then go back to the main screen.
     Then maintain the flat file as node id, info object, node name, link name, parent no.
     Then info package creation then click on the flat file right clicks on it then a other screen opens then select attribute data source and then continue.
     Then other screen opens then select external data tab in .CSV then click 1 the enter preview then another screen opens then click then it shows the preview then schedule then start then monitor click on it then it opens other screen then click on the master data then we can see the data then go back to the main screen.
     Then select the flat file right click on it then it gives other screen then select hierarchy in that then click continue then it opens other screen then select hierarchy selection tab there you can see the file name then select the button of hierarchy.
     Then select External data then the file name in CSV then processing tab only psa option with update subsequently in data targets then the update it schedule start then the monitor then go to the main screen.
     Then go to info object then select the file id which you have given then double click on it then select hierarchy or text file then the contents then execute it.
     Create a transaction table , cube in a normal way. We can see the result in reports we have to give the hierarchy name in the properties of rows where we drag the characteristics id then we can see the records which we have entered manusally after executing the report.
Regards
Ashwin

Automatic creation of info record

Hi All ,
In my case, Automatic creation of info record is active during creation of PO and in case of standard PO, price is automatically coming during creation of PO
But in case of consignment PO, Price is not coming automatically.
Please help... thanks in advance

HI,
In Consignment PO, Price (Condtion tab) won't be there.
As per the concept of Consignment, stock will be in our premise but ownership of the stock will be with the vendor. Only when we consume from the consignment stock it will come under our valuation & the price maintained in the consignment info-record will used in this case.
Refer help.sap documentation for more details on Consignment.
Thanks & Regards,

Creating Info-Package Groups

Hi All,
We are running a Job through Process chain. But due to some bug it is taking 4 Hrs to complete. We tried executing the Info-Packages manually. It completed with in 30 Mins. So we are planning to create IP group to trigger that Job instead of through Process chain.
Can you please explain how to create the Info Package Group and how to include info packeges in to the IP Group.
After creating IP group we have to schedule a Job to trigger this IP group which inturn triggers the Info packages.
If possible please explain the steps for the above process.
Million of thanks in advance.
Regards,
Reddi.

Hi,
Procedure to create InfoPackage Group
Go to InfoSource tree in modeling of the Administrator Workbench and choose in the standard toolbar of the right area of the screen Show InfoPackage Group.
On the right-hand side of the screen, you will see the InfoPackage group tree.
Highlight a node of the InfoPackage group tree and create a new InfoPackage group using the context menu (right mouse click). This is always inserted underneath the highlighted node.
Select an InfoPackage (in the InfoSource tree in the middle area of the screen) that you want to transfer to the InfoPackage group and move it into the InfoPackage group you want by using drag & drop.
You can assign as many InfoPackages as you like to an InfoPackage group.
InfoPackages with the same selection conditions, same assignment for combination of InfoSource / DataSource / source system, same data type (transaction data or master data), and same data target cannot be assigned to the same InfoPackage group.
Alternatively to the above procedure, you can also create an InfoPackage group in the monitoring view of the Administrator Workbench. However, in this view it is not possible to insert InfoPackages into the InfoPackage Group.
You have created an InfoPackage group and have inserted InfoPackages into the InfoPackage group. You can now
Scheduling an InfoPackage Group
Choose Show InfoPackage Groups in the InfoSource tree of the Administrator Workbench Modeling, or choose the InfoPackages view in Monitoring of the AWB.
Select an InfoPackage group from the InfoPackage group tree and choose Schedule.
You arrive in the scheduler (InfoPackage group maintenance) with the InfoPackages and Scheduling tab pages.
Select the InfoPackages you want to load.
By default, all InfoPackages are selected.
On the tab page InfoPackages, number the InfoPackages that are assigned to the group according to the sequence in which the loading process is to be carried out.
For the InfoPackages, select whether you want the monitor to run a check during the data update to see if the first request from the list has been completely and correctly processed. Only then will the request for which this indicator has been set be processed.
Define a fixed delay of one minute for the individual InfoPackages. The delay represents the wait time until the next request is carried out.
Schedule the InfoPackage group in the background.
-Shreya

Prob during creation of info package

Similar Messages

Maybe you are looking for