Prob in ME22N

Hi All,
I am working on Transaction ME22N,in which after chaning the PO quantity or delivery date the confirmation catagory ( ebtyp ) of the record should be changed to 'ZH' from 'AB'.and after this it should accordingly update in transaction MD04, so I am able to achieve the correct result for change in PO quantity but for change in delivery date it is changing the confirmation catagory to 'ZH' but not updationg anything in transaction MD04 and the record gets deleted from MD04.
any pointers to this prob?

Hi Sam,
Yes i am using user exit EXIT_SAPMM06E_013, can u please tell me how can i code for MD04, i mean which table and which field are to be updated?if possible please send the code.

Similar Messages

My apps dance open and close on their own in my IPad 2 what can be the prob? I have already restored

I got the charger flex or pin changed and now the apps dance on the screen, photos open and zoom in, then out, the other apps open and close. I have already restored the device with Itunes and prob is still there. What can be the problem? Any suggestion will be welcome. Thank you

THANKS for your prompt reply Bluetooth is off in my laptop and IPhone.. and in fact the reset is the only thing that can make it back to normal. But for a lil while. I wonder if it is the touch, or the home botton... both things are very expensive to replace, so I wouldn't like to spend $$ and continue having the prob.....

Authorization error while attaching document in ME22N

Hi,
Scenario 1: I attach a document in ME22N and then save it. Result: I get an authorization error.
Error is: "You have no authorization for extensions (activity03)"
Scenario 2: I just make a change (say in price) without attaching any document and then when i try to save it. Result: There is no authorization error.
Message (output) type in both the cases is EDI.
On further investigation, we found the authority-check abap statement which is responsible for throwing the error.
authority-check           object authority_obj_edi_deftool
            id 'EDI_TCD' field authority_tcode_edi_deftool
            id 'ACTVT'    field pi_activity
            id 'EDI_DOC' DUMMY
            id 'EDI_CIM' field pi_cimtyp.
This statement gets executed for both the scenarios and with the SAME variables but it throws error in case of scenario 1 only.
Following are the values of the variables in BOTH cases:
authority_obj_edi_deftool = S_IDOCEFT
authority_tcode_edi_deftool = WE30
pi_activity = 03
pi_cimtyp = Z2ORDERS02
Any help is appreciated.
Regards,
Chinmay

Dear,
Kindly contact your basis team. it will help you.
Please give him SU53 screen short for his reference.
Regards,
Sandip

Reg. Exit/BADI for changing item data of PO in ME22N

Hi all,
My requirement is to update the field LABNR (Order Ack.) of few specific line items of a PO, in the Transaction ME22N, using Exit/BADI.
I have tried the BADI ME_PROCESS_PO_CUST. But the PROCESS_ITEM method of this BADI processes only the line item which has been changed/inserted in ME22N transaction. But my requirement is to update line items irrespective of whether that line item was "changed/not changed" during the process in ME22N screen.
Could you please suggest me some suitable Exit/BADI for this requirement.
Regards,
Anbarasan K

Thanks Martin.
Problem solved by implementing the method Process_Header.
1. Get the items from Header                              - im_header->get_items
2. Loop the item list and get the line item record   - re_item-item->get_data
3. <- Logic to Update the line item - >.
4. Update the line item                                       - re_item-item->set_data
Thank you very much.. Martin.
Regards,
Anbarasan K

Prob in decode function

hi iam having prob with the following decode function
declare
c varchar2(20);
begin
select decode(deptno,
     10, 'accounting',
     20,'Research',
     30 ,'sales',
     40,'operations','UNKNOWN') into c from dept where loc='DALLAS';
dbms_output.put_line('DEPARTMENT in DALLAS'||c);
select decode(deptno,
     10, 'accounting',
     20,'Research',
     30 ,'sales',
     40,'operations','UNKNOWN') into c from dept where loc='INDIA';
dbms_output.put_line('DEPARTMENT IN INDIA'||c);
end;
iam getting no_data_found exception which is reasonable..but what happened to 'unknown' clause in decode function.
thank u
rajiv

DECODE only works on rows returned from the database. If there are no rows, DECODE has nothing to work on.
Consider:
SQL> SELECT DECODE(dummy, 'X', 'Found a row', 'No row')
2 FROM dual;
DECODE(DUMM
Found a row
SQL> SELECT DECODE(dummy, 'X', 'Found a row', 'No row')
2 FROM dual
3 WHERE 1=2;
no rows selectedIf you want to have c contain UNKNOWN when there are no rows returned, you need to do something more like:
DECLARE
c VARCHAR2(20);
BEGIN
   BEGIN
      SELECT DECODE(deptno, 10, 'accounting',
                            20,'Research',
                            30 ,'sales',
                            40,'operations','UNKNOWN')
      INTO c
      FROM dept
      WHERE loc='DALLAS';
   EXCEPTION
      c := 'UNKNOWN';
   END;
   DBMS_OUTPUT.Put_Line('DEPARTMENT in DALLAS'||c);
   BEGIN
      SELECT DECODE(deptno, 10, 'accounting',
                            20,'Research',
                            30 ,'sales',
                            40,'operations','UNKNOWN')
      INTO c
      FROM dept
      WHERE loc='INDIA';
   EXCEPTION
      c := 'UNKNOWN';
   END;
   DBMS_OUTPUT.Put_Line('DEPARTMENT IN INDIA'||c);
END;HTH
John

ISE 1.2 - Multiple NICs/Load Balancing for DHCP Probe

Hello guys
Just prepping an ISE 1.2 patch 8 setup in our organization. I am going for the virtual appliances with multiple NICs. It will be a distributed deployment with 4 x PSNs behind a load balancer and there is no requirement for wireless or guest user at the moment. I've got 2 points I will like to get some guidance on:
Our DC has a dedicated mgmt network and I plan to IP the gig0 interface of the PANs, MNTs and PSNs from this subnet. All device admin, clustering, config replication, etc will be over this interface. However, RADIUS/probe/other user traffic to the ISE PSNs will be over the gig1 interface which will be addressed from another L3 network. Is this a supported configuration in ISE?
I intend to use the DHCP probe as part of device profiling and will ideally like to have just an additional ip helper to add to our switch SVI config. Also, it will appear that WLCs can only be configured for 2 DHCP servers for a given network so another consideration for when we bringing our WLAN in scope. We however use ACE load balancers within our DC and from what I have read, they do not support DHCP load balancing. Are there any workarounds to using the DHCP probe with multiple PSNs without having to add each node as an ip helper/DHCP server on the NADs?
Thanks in advance
Sayre

Hello Sayre-
For Question #1:
Management is restricted to GigabitEthernet 0 and that cannot be changed so you should be good there
You can configure Radius and Profiling to be enabled on other interfaces
Even though you are not using guest services yet, you can dedicate an interface just for that. As a result, you can separate guest traffic completely from your production network
Take a look at this link for more info:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_app_c-ports.html
For Question #2
If you are using a Cisco WLC and running code 7.4 and newer you don't need to mess with the IP helper configurations.
The controller can be configured to act as a collector for client profiling and interact with the DHCP thread along with the RADIUS accounting task that is running on the controller. The controller receives a copy of the DHCP request packet sent from the DHCP thread and parses the DHCP packet for two options:
–Option 12—HostName of the client
–Option 60—The Vendor Class Identifier
After this information is gathered from the DHCP_REQUEST packet, a message is formed by the controller with these option fields and is sent to the RADIUS accounting thread, which is in turn transmitted to the ISE in the form of an interim accounting message.
Both DHCP and HTTP profiling settings are located under the "Advanced" configuration tab in the WLC
On the other hand, you can also use Anycast for profiling. You can check out some of Cisco Live's sessions for more info on that. Here is one that is from a couple of years (There are more recent ones that are available as well):
http://www.alcatron.net/Cisco%20Live%202013%20Melbourne/Cisco%20Live%20Content/Security/BRKSEC-3040%20%20Advanced%20ISE%20and%20Secure%20Access%20Deployment.pdf
I hope this helps!
Thank you for rating helpful posts!

Changes not getting captured in MM06E005 of ME22N

Hi,
My requirement is to add an additional tab at Item Level and a field in that tab. I used the MM06E005 and implemented it. I can see the tab and the field in it at Item level.But when iam making changes in ME22N,the change is not getting Saved.
i created a field   ZZVEND type char in CI_EKPODB .
Created the check box with same field name in Screen Exit 0111 of MM06E005.
Then i kept the coding in following exits
EXIT_SAPMM06E_016
break-point.
EXIT_SAPMM06E_017
break-point.
EXIT_SAPMM06E_018
break-point.
IF I_UCOMM = 'MESAVE' .
E_CI_UPDATE = 'X'.
E_CI_EKPO-ZZVEND = EKPO_CI-ZZVEND.
ENDIF.
While running ME22N,its first going into EXIT_SAPMM06E_016 and after checking the ZZVEND i in ME22N ts going to EXIT_SAPMM06E_017.
But i dont see
I_EKPO-ZZVEND = 'X' in Importing Parameters or TEKPO-ZZVEND = 'X' in Tables of EXIT_SAPMM06E_017.
After this its entering into
EXIT_SAPMM06E_018.
Finally the data is not getting Saved but the message is showing 'Purchase Order changed'.
Please suggest where I am going wrong.
Regards
K Srinivas

Thankyou for the replies. I kept the following coding in the Exits. The problem is that i kept the break-point in the three exits and after running ME22N,its entering first into Exit 16 and after checking the field(Check Box) in Customer Data Tab ,its entering into Exit 17. But the zfield in I_EKPO is empty,the value 'X' is not reflecting here. Please suggest where i am doing wrong. I went through many SDN threads and i am unable to solve the issue.
INCLUDE ZXM06TOP.
data: gl_aktyp type c,
      gl_no_screen type c,
      gl_ekpo_ci like ekpo_ci,
      gl_ekpo like ekpo,
      gl_ucomm like sy-ucomm.
data: gt_ref_ekpo_tab type table of ekpo_tab.
EXIT_SAPMM06E_016
gl_aktyp = i_aktyp.
gl_no_screen = i_no_screen.
ekpo_ci = i_ci_ekpo.
gl_ekpo = i_ekpo.
EXIT_SAPMM06E_017
move-corresponding i_ekpo to gl_ekpo_ci.
gl_ekpo = i_ekpo.
EXIT_SAPMM06E_018
e_ci_ekpo        = gl_ekpo_ci.
if gl_ekpo_ci-zz_vend ne ekpo_ci-zz_vend.
e_ci_ekpo-zz_vend = ekpo_ci-zz_vend.
if gl_aktyp ne 'A'.
    e_ci_update = 'X'.
endif.
endif.
Regards
K Srinivas

Custom tab data not saving in ME22N w/ BAdI ME_PROCESS_PO_CUST

Hello all,
I have implemented BAdis ME_PROCESS_PO_CUST & ME_GUI_PO_CUST and created a custom tab at the header level in ME21N/ME22N. I have fields such as Delivery Date and Ex Factory Date in my tab.
We are able to put data in these fields and have that data populate their respective fields in the Purchase Order.
Our users would like to be able to run ME22N and select certain line items and have only those items changed with the data from the custom fields.
So, my question is how do I handle line selection in the context of these BAdIs? Is there a way to know which lines have been selected and then only change the data in those items?
I have looked in Class CL_PO_ITEM_HANDLE_MM for an attribute or method that might help but I haven't found anything as of yet.
I have found that the field MEPO1211-TCSELFLAG is set when a line is selected in ME22N. However, I haven't found a way to work with it. It doesn't get passed to any of the methods in the BAdIs, as far as I know.
January 27, 2012 **************
We were able to capture the lines selected by using code from method mass_change in Include LMEGUICJK, Function Group MEGUI. The lines are in the lt_models table.
So, now my issue is getting data to save in ME22N. When I put data in my custom tabs and select a line, the data gets changed on the screen but does not save. It does work when I make a change in another field, like changing the description for instance. I'm using the set_changed method in Process_Header from ME_PROCESS_PO_CUST but it doesn't work.
I'm getting the idea that I'm the first ABAP developer to try this...
Thanks for any help.
Kind Regards,
Chris
Edited by: Chris Mowl on Jan 11, 2012 10:33 AM
Edited by: Chris Mowl on Jan 11, 2012 4:24 PM
Edited by: Chris Mowl on Jan 27, 2012 10:57 AM
Edited by: Chris Mowl on Jan 27, 2012 2:00 PM

Hi,
Checkout the below link :
<link to blacklisted site removed by moderator>
Shailaja Ainala.
Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?

I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?

5GB is typically not enough space to download a movie. Often, movies take from 3 - 5 GB to begin with. The only option you have is to delete more things from your iPad. You can remove unused Apps, pictures, music, text message (messages with pictures can take up a lot of space), email messages, books, magazines etc.

Issue in FF v 3.6.10: I have a page which have more than 20 link, clicking on these link opens up a popup using window.showModalDialog, for the first 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open.

Issue in FF v 3.6.10: I have a web page which have more than 20 link, clicking on each of these link opens up a pop-up using window.showModalDialog, for the first consecutive 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open. This is m problem, the real user on the web page can click on more than 20 link in such a scenario it may create problem, please help

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

Error msg when changing the MRP type in ME22N

Hi,
When i change MRP type from MRP to Manual in ME22N, it will come out the error msg:Purchase request mandatory for MRP generated Purchase order (Application area: ME Message no. ME901)! My question is how to change this error msg to warning msg?
From SPRO-Material Management-Purchasing-Environment Data-Define Attributes of System Messages ,i can not find the entry regarding this issue.
Any suggestion!
Thanks!

Hi,
Sometimes end user want to add some item without PR under MRP PO.
As before system will only indicate the warning msg that we change to error msg three month ago, but i forgot how to change!
thanks!

Prob. with iTunes, Phone won't shut off. Tks.

3GS with 6.1.3 Prob. with iTunes. When I want to close out of iTunes after a Podcast the App will not close out when I hit Home. All other Apps shut down, only prob. is with iTunes. Cant turn phone off goes back ti iTunes when turned on again. Tks.

I hope the previous replies are wrong. It was my understanding that even when Match is turned off in iTunes, music previously matched or uploaded to iCloud will stay there, associated with my Apple ID, even through a cold boot etc. If you want to remove songs from iCloud, but keep them locally, do this:
1. Click "Store" in the iTunes top Menu
2. Select "Turn on iTunes Match" (if it isn't already turned on)
3. Close iTunes.
4. Hold down the Shift key while you open iTunes - this will prompt you to choose or create a (new, locally empty) Library in a different folder from your main Library.
5. Now you should see ONLY music that is stored in iCloud.
6. Delete them all. iTunes will show a checkbox or button for you to click to delete the selected items from iCloud.
7. Turn off iTunes Match (see #1)
8. Restart iTunes with the Shift key again, so you can get back to your main Library - with Match turned off.

Prob with iTunes on Vista! Please Help!

hi guys,
i am getting the following error message when i install iTunes 7.5 version
[IMG]http://img403.imageshack.us/img403/8344/itunesprobbo9.jpg[/IMG]
i also tried iTunes 7.4 version but i am getting the same error message
iTunes used to work before, but suddenly the prob
i tried unistalling and installing the app again but in vain...
Please Help!
Thanks in advance!
-Manish

“iTunes.exe – Bad Image” ... “C:\Windows\system32\mssip32.dll is either not designed to run on Windows or it contains an error. Try installing the program using the original installation media or contact our system administrator or the software vendor for support.”
Okay. Literally, it's saying that one of the dlls associated with Cryptographic Services on the PC is damaged. That can cause an iTunes launch failure.
... However, most of our experience here at Discussions is with troubleshooting these sorts of messages on Windows XP systems, rather than Vista and I don't have a Vista box handy for reference.
So, if you don't receive any further replies here, it might be best to try posting instead at the Windows Vista Community Discussions Groups. Fingers crossed someone there might be better placed to help you troubleshoot this:
http://windowshelp.microsoft.com/communities/newsgroups/en-us/default.mspx
(Not trying to get rid of you here, just trying to get you on the radar screens of people who might be in a better position to help.)

TS1702 Telegraph app does not allow access to newspaper says have not paid subscription. Paid through iTunes and tel says it is iTunes prob. Can't talk to anybody at itunes

Telegraph app does not allow access to newspaper. Says. Have not paid sub but pay via iTunes Store. Telegraph says it is an iTunes prob but I can't get to talk to anyone there! Any suggestions please?

Just got this -
Dear iTunes Customer,
You recently received an email informing you that your iTunes Match Subscription could not be auto-renewed. We have resolved the problem and your iTunes Match Subscription has been renewed.
We apologize for the delay with your auto-renewal. If you have any questions, please contact AppleCare at http://www.apple.com/support/itunes/
I hope everyone else is all set too.

Hi, have a iphone/macbook itunes prob. i connected my phone to mac to add songs, and it wiped 99% of music from my phone. on the mac it still lists the songs on my phone but they are greyed out. can anyone help? very frustrated and want my music back.

hi, have a iphone/macbook itunes prob. i connected my phone to mac to add songs, and it wiped 99% of music from my phone. on the mac it still lists the songs on my phone but they are greyed out. can anyone help? very frustrated and want my music back.

I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

Prob in ME22N

Similar Messages

Maybe you are looking for