Prob in PO smartform mail sending

Dear all,
We are facing prob at the time of PO smartform mail sending.
Issue is if in vendor master if in general tab there is option to mantain mail id.
if i keep blank than mail is not going this is right.
but our requirement is if in general tab email is not maintained than also we have to check in contact person tab in vendor master
there is tab called partners details if mail id maintained in partners than mail should shoot.
Thanks in advanced.
Laxman Sankhla.

Hi,
Just find an exit and populate the mail id based on your logic,
or if you are using WF just chip your logic in one activity.
Regards
Bikas

Similar Messages

Smartform Mail Sending via Action profile

Hi,
we have a big problem, because our sended emails going into customers spam filter. We hava SAP CRM 5.0 and we send the emails via action profile.
For that we use the standard for sending smartforms via action profile. Follwing problems are occured:
1) email recipient is fill only in the cc field, not in the to field of an email
2) the subjet ist the sam as the dcument name
3) the emial is sended without text only whith attachment
So my question are:
how can i customize that the email is wirtten in the to field and how i can change the subject of this mail.
Is ist possible to add a text to the email? Maybe not, but than we could add a disclaimer in the mail hub - so my firts questions are more importent for me.
Thank you for your help
Stefan

Hi,
To manipulate the subject Refer Note 895550 - Name of Smart Form used as e-mail subject
Im not sure why the email recipient is in CC instead of To. Please check your Action settings. How are you determining the recipient? if it's by partner function, it should automatically be filled in To field.
Smartforms can be sent either as Text or pdf attachment. This is controlled globally in SMTP settings in SCOT. I believe you can choose attachment option and also add some text by manipulating the Action class.
HOpe this helps.
Shaik

Style is lost when smartforms is sended by mail

Hi!!
I have a big issue.
I have done a smarfoms which I have added a style. When I see the smartforms I can see it well, with his caracters in colors, etc. however when smartform is sended by outlook 2007 mail , the smartforms just appears without style.
thanks.

By default, the email is sent with format "RAW", which is text based. However one option you could try is to change that to "HTM" in the PROCESS_BBP_BID_MAI_BCS method of the class for processing email outout. (This configuration can be found in SPRO SRM server > cross application basic settings > set output actions and output format > define actions for document output.)

Smartform Mail -DOCUMENT_NOT_SENT Exception

Hi ,
We are using the FM - SO_NEW_DOCUMENT_ATT_SEND_API1 to send a smartform mail with PDF attachement, we are able to acheive this in the Developement system, where as in Quality system this FM is raising exception DOCUMENT_NOT_SENT (sy-subrc = 2).
The same code exists in both the systems, I read in SDN that the SU01 settings should be checked, I checked it and made it similar to the developement system.
Can anyone let me what may be the root cause of the issue ?
Thanks in advance.

Hi Jay,
Thanks for your quick reply.
commit_work = 'X' is in the code in both the systems.
Logged off and logged in again for SU01 settings to be effective.
But still the same exception.

Smartform Mail Issue

Can anyone please let me know how to set the value of JOB_OUTPUT_INFO-OUTPUTDONE to 'X' in the class CL_SF_MAIL_PPF.
My requirement is to avoid error mesage in logs of transaction CRMD_ORDER which is triggering a smartform mail, if I change the value of JOB_OUTPUT_INFO-OUTPUTDONE to 'X' while debugging, I am not getting the error message in the logs.
Mail is triggerred with PDF, there is no issue in the mail, except the above issue.
Please let me know how to set the above mentioned field to 'X' programatically. Point ll be awarded.
Thanks in Advance.
Edited by: Mohana Vijayan on Oct 9, 2009 4:27 PM

REPORT ZSMF_MAIL_PROGRAM.
DATA: OUTPUT_OPTIONS TYPE SSFCOMPOP,
CONTROL_PARAMETERS TYPE SSFCTRLOP,
OUTPUT_DATA TYPE SSFCRESCL.
DATA: FILESIZE TYPE I.
DATA:FM_NAME TYPE RS38L_FNAM.
DATA LT_OTFDATA LIKE ITCOO OCCURS 1000 WITH HEADER LINE.
DATA LT_PDFDATA LIKE TLINE OCCURS 100 WITH HEADER LINE.
DATA:LT_PDF LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA:LW_PDF LIKE LINE OF LT_PDF.
DATA:LW_PDFDATA LIKE LINE OF LT_PDFDATA.
DATA:LS_JOB_INFO TYPE TABLE OF SSFCRESCL WITH HEADER LINE.
DATA:LT_MESSAGE TYPE TABLE OF SOLISTI1 WITH HEADER LINE.
DATA: DOCU_DATA LIKE SODOCCHGI1 OCCURS 0 WITH HEADER LINE.
DATA PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE.
DATA OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA REAL_RECIPIENTS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA CONTENTS_TXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA CONTENTS_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA PACKING_LIST_TXT LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE.
DATA OBJECT_HEADER_TXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA OBJECT_HEADER_ATT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA PACKING_LIST_ATT LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE.
DATA: W_EMAIL(1215) TYPE C.
DATA:PSUBJECT(90) TYPE C.
DATA: LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES .
*Calling the Smartform.
Get Email id from ztab_email table.
select single email_id from ztab_email
into w_email.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'Z_CONTD_DEBT_FORM'
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
ENDIF.
CONTROL_PARAMETERS-DEVICE = 'MAIL'.
CONTROL_PARAMETERS-NO_DIALOG = 'X'.
CONTROL_PARAMETERS-GETOTF = 'X'.
CONTROL_PARAMETERS-PREVIEW = SPACE.
OUTPUT_OPTIONS-TDTITLE = SY-TITLE.
OUTPUT_OPTIONS-TDNEWID = 'X'.
OUTPUT_OPTIONS-TDNOPREV = 'X'.
OUTPUT_OPTIONS-TDDELETE = 'X'.
CALL FUNCTION FM_NAME
EXPORTING
CONTROL_PARAMETERS = CONTROL_PARAMETERS
OUTPUT_OPTIONS = OUTPUT_OPTIONS
USER_SETTINGS = SPACE
IMPORTING
JOB_OUTPUT_INFO = OUTPUT_DATA
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
OUTPUT_DATA-OUTPUTDONE = 'X'.
*Convert to PDF Format.
CLEAR LT_PDFDATA.
REFRESH LT_PDFDATA.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = '132'
IMPORTING
BIN_FILESIZE = FILESIZE
TABLES
OTF = OUTPUT_DATA-OTFDATA
LINES = LT_PDFDATA
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
ENDIF.
REFRESH LT_PDF[].
*Convert 132 line sized internal table into 255 line sized internal table.
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
LINE_WIDTH_DST = '255'
TABLES
CONTENT_IN = LT_PDFDATA[]
CONTENT_OUT = LT_PDF[]
EXCEPTIONS
ERR_LINE_WIDTH_SRC_TOO_LONG = 1
ERR_LINE_WIDTH_DST_TOO_LONG = 2
ERR_CONV_FAILED = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
Sending it as an Email Attachment.
LD_FORMAT = 'PDF'.
LD_ATTDESCRIPTION = 'CONTESTED'.
LD_ATTFILENAME = 'TEST_FILE'.
CLEAR REAL_RECIPIENTS.
REFRESH REAL_RECIPIENTS.
REAL_RECIPIENTS-REC_TYPE = 'U'.
REAL_RECIPIENTS-COM_TYPE = 'INT'.
REAL_RECIPIENTS-NOTIF_DEL = 'X'.
REAL_RECIPIENTS-NOTIF_NDEL = 'X'.
REAL_RECIPIENTS-RECEIVER = W_EMAIL.
APPEND REAL_RECIPIENTS.
CLEAR PACKING_LIST.
REFRESH PACKING_LIST.
*Describe the body of the message
PACKING_LIST-TRANSF_BIN = ' '."""""""""""""" CHANGE IT FROM 'X' TO ' ' """""""""""""
PACKING_LIST-HEAD_START = 1.
PACKING_LIST-HEAD_NUM = 0.
PACKING_LIST-BODY_START = 1.
PACKING_LIST-BODY_NUM = 1.
PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND PACKING_LIST.
PACKING_LIST-TRANSF_BIN = 'X'.
PACKING_LIST-HEAD_START = 1.
PACKING_LIST-HEAD_NUM = 1.
PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE LT_PDF LINES PACKING_LIST-BODY_NUM.
PACKING_LIST-DOC_TYPE = LD_FORMAT.
PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
PACKING_LIST-DOC_SIZE = PACKING_LIST-BODY_NUM * 255.
APPEND PACKING_LIST.
*Populate the subject/generic message attributes
DOCU_DATA-DOC_SIZE = 1.
DOCU_DATA-OBJ_LANGU = SY-LANGU.
DOCU_DATA-OBJ_NAME = 'SAPRPT'.
DOCU_DATA-OBJ_DESCR = PSUBJECT.
DOCU_DATA-SENSITIVTY = 'F'.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOCU_DATA
SENDER_ADDRESS_TYPE = 'INT'
COMMIT_WORK = 'X'
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = V_SENDER
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
PACKING_LIST = PACKING_LIST
OBJECT_HEADER = OBJECT_HEADER
CONTENTS_BIN = LT_PDF
CONTENTS_TXT = CONTENTS
RECEIVERS = REAL_RECIPIENTS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
ENDIF.

Status of the mail sending option using SO_NEW_DOCUMENT_ATT_SEND_API1

Hi experts,
I m using SO_NEW_DOCUMENT_ATT_SEND_API1 function moduel for sending mails to dealers. That is, whenver i execute a Z transaction, the customer invoice details are getting displayed in report output. At the same time, the same output data is sent as mail to the respective dealers.
Now teh user is asking whether there is any possiblity for the end users to have a proof of the mail which is being sent from the Z transaction. If the mail is sent, the end user who executes the Z transaction (mail sending transaction) should have that mail in his/her SENT ITEMS. If the mail not reaches the dealer, then the user must identify the mail bounce identification.
Pls tell me how to achve the same..
Regards,
Shanthi

Hi,
Yes it is possible..
Just pass 'X' to the exporting parameter 'put_in_outbox'. The user can check the send mail in 'sost'. All the details of the mail will be there. This will be the proof that the mail was sent.
Reg the 2nd part of your query, if the mail is not delivered to any reciepent or to particular recipient, the details will be there in the SAP outbox, that also you can see through transaction 'sost'.
Thanks & Regards
Rocky

Mail Send Functionality using SO_NEW_DOCUMENT_ATT_SEND_API1

hi,
i m using Fn Module "SO_NEW_DOCUMENT_ATT_SEND_API1" to send email with attachment.
I have written a program which will fetch data in excel format . this excel should be sent as attachment to specified receiver. however i m having difficulties adding attachment to function module.
I specified under parameter "contents_bin" but its giving some error message related wth structure.
I chkd SDN and wasnt able to find any resolution yet.
Any suggestion or idea which can be useful on this.
Thanks.

REPORT zsendemail                    .
PARAMETERS: psubject(40) type c default 'Hello',
            p_email(40)   type c default 'write email address' .
data:   it_packing_list like sopcklsti1 occurs 0 with header line,
        it_contents like solisti1 occurs 0 with header line,
        it_receivers like somlreci1 occurs 0 with header line,
        it_attachment like solisti1 occurs 0 with header line,
        gd_cnt type i,
        gd_sent_all(1) type c,
        gd_doc_data like sodocchgi1,
        gd_error type sy-subrc.
data:   it_message type standard table of SOLISTI1 initial size 0
                with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*&      Form POPULATE_MESSAGE_TABLE
      Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform.                    " POPULATE_MESSAGE_TABLE
*&      Form SEND_EMAIL_MESSAGE
      Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform.                    " SEND_EMAIL_MESSAGE
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
      submit rsconn01 with mode = 'INT'
                    with output = 'X'
                    and return.
endif.
endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM

I need an e-mail sending to my macbook, it appears to download but is never in my inbox. It does got to my iphone. It isn't in trash. Can anyone help ?

I need an e-mail sending to my macbook, it appears to download but is never in my inbox. It does got to my iphone. It isn't in trash. Can anyone help ?

I get those all the time. Most annoying. I usually ignore them or mark them as spam.

Send E-mail Send E-mail question

Hi,
Im trying out the Developers Toolbox and am trying to figure out if its right for me, and have very basic - beginning MySQL and php skills.
The tutorial at http://help.adobe.com/en_US/Dreamweaver/9.0_ADDT/help.html?content=ch12_send_email_01.htm l is rather sketchy, when I follow the tutorial on that page:
"The Send E-mail trigger allows the site developer to automatically send an e-mail when a form is submitted. It is an AFTER trigger, and it can be executed after insert/update/delete/custom transactions.
This trigger is accessible from the Application panel, Server Behaviors > + > Developer Toolbox > Send E-mail > Send E-mail."
well, when I try that, I get an error on the page which says:
"There are no insert, update, custom or login or delete transactions on page. Please insert an appropriate transaction first."
OK I am assuming that I need some kind of an html form open and on a page, however where do I start? Its as if the tutorials left out a huge chunk of the instructions. I realize I am no expert but if someone was buying the toolbox for the first time how would one know where to start? Do I need to create a new database table first? What kind of table? Can it be a table that is part of the site database for the shopping cart database that I already have linked to the store? Or does it need to be a seperate - database, table? Or just a php page with the form in it? Or does the form page need to be .html?
Or is the toolkit only for advanced developers with advanced php and MySQL skills and should I not even bother buying it?
Anyway can someone please give me a hint?
All I am trying to do is construct a simple email form for my web site which I have created in Dreamweaver and I need a php script to process the data inserted into the form and send it off to the mail server to forward to the webmaster's email address. I have the form created and brought up the form page, but then the Server Behaviors > + > Developer Toolbox > Send E-mail > Send E-mail. Tab is not accessible, and I am assuming that it wont be unless I have a .php file open, so I dont have a clue as to where to start.
So Ive got 27 days left to determine if its worth buying the toolbox, if I cant figure it out by then then I guess Ill buy some easier to use extension or stand alone to create my email form and other scripts.

Hi DBS,
just some thoughts:
So Ive got 27 days left to determine if its worth buying the toolbox, if I cant figure it out by then then I guess Ill buy some easier to use extension or stand alone to create my email form and other scripts
honestly said: if sending form data via email is about all you want to achieve, buying ADDT or even trying to learn it would be overkill, as it comes with heaps of features which you´ll probably never need -- in this case investing in a stand alone form-to-email script seems a better solution.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

How can i read only .txt file and skip other files in Mail Sender Adapter ?

Hi Friends ,
 I am working on scenario like , I have to read an mail attachement and send the data to R3.
 It is working fine if only the .txt file comes.
 Some times ,html files also coming along with that .txt files. That time my Mail adapter fails to read the .txt file.
 I am using PayLoadSwap Bean and MessageTransformBean to swap and send the attachment as payload .
 Michal as told to write the Adapter module to skip the files .But i am not ware of the adapter moduel . If any blogs is there for this kind of scenarios please give me the link.
 Otherwise , please tell me how to write adapter module for Mail Sender Adapter?
 How to download the following
 newest patch of XI ADAPTER FRAMEWORK CORE 3.0
from SAP Service Marketplace. Open the file with WinZip and extract the following
SDAs:
aii_af_lib.sda, aii_af_svc.sda
aii_af_cpa_svc.sda
 I have searche in servive market place .But i couldn't find that . Can you please provide me the link to download the above .
 If any other suggestions other than this please let me know.
Regards.,
V.Rangarajan

=P
Dude, netiquette. Messages like "i need this now! Do it!" are really offensive and no one here is being payed to answer anyone's questions. We're here because we like to contribute to the community.
Anyway, in your case, just perform some search on how you could filter the files that are attached to the message. The sample module is just an example, you'll have to implement your own. Tips would be to query the filename of the attachments (or maybe content type) and for the ones which are not text, remove them.
Regards,
Henrique.

Mail Sender adapter issue in PO7.4

Hello Experts,
We are migrating from PI7.0 to PO7.4, where in we are struck up with an issue of Mail Sender Interface.
Here we have a scenario of Mail to Proxy where we are processing attachment(CSV file). But here when I we run the interface mail body is being processed not the attachment. Also could nt see the Payload as when I click on the Attachment payload a pop up is coming and closing automatically.
Can someone please suggest where it went wrong as this is working in existing PI7.0 version.
Thanks.
VR

Hi VR
Have you tried swapping by Payload name?
Please try it out with the following configuration, and remove any extra lines - there are duplicate key names and values in your configuration.
You should be able to see the successfully swap by payload name in the audit log as shown below.
Rgds
Eng Swee

Mail Sender Adapter - Attachment Handling

Hello,
I 'm using XI 3.0 SP 14.
I have problems with my Mail-Sender-Adapter.
The mails, I fetch, have an xml-attachment which
represents an IDOC-structure (ORDERS.ORDERS05).
I want to sent this attachment as payload to an SAP-System.
The problem is now, that I have 2 Payloads (SXMB_MONI).
One for the normal email-body and one for my original
xml-attachment. See below:
- <SAP:Payload xlink:href="cid:[email protected]">
<SAP:Name>MailMessage</SAP:Name>
<SAP:Description>mail message</SAP:Description>
<SAP:Type>Application</SAP:Type>
</SAP:Payload>
- <SAP:Payload xlink:href="cid:[email protected]">
<SAP:Name>MailAttachment-1</SAP:Name>
<SAP:Description>mail attachment</SAP:Description>
<SAP:Type>ApplicationAttachment</SAP:Type>
</SAP:Payload>
</SAP:Manifest>
</SOAP:Body>
The XI Runtime Workbench (SXMB_MONI) takes (in my case)
the wrong one (email-body-attachment) and gives me
an parsing error. (Error occurs at my IDOC-Receiver-Adapter)
Now my question:
Can I remove the email-body-attachment, so that
the further processing works with my xml-attachment?
Or how can I resolve my problem.
best regards
Marcel Reichert

Hi Marcel,
use the PayloadSwapBean module to get the attachment as main payload.
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
As parameters use:
swap.keyName = payload-name
swap.keyValue = MailAttachment-1
Regards
Stefan

MAIL Sender adapter going in to error

Hello Experts ,
We have configured one mail sender adpater with a custom module to read the attachements in the email message. This was working fine before.
We recently had a restart of the PI servers. After that the channel is going in to error. The first error as per NWA logs is :
failed to call the adapter engine; caused by javax.ejb.EJBException: Exception in getMethodReady() for stateless bean sap.com/com.sap.aii.adapter.mail.app*xml|com.sap.aii.adapter.mail.ejb.jar*xml|XIMailAdapterBean; nested exception is: com.sap.engine.services.ejb3.util.pool.PoolException: javax.ejb.EJBException: Exception raised from invocation of public void com.sap.aii.adapter.mail.ejb.XIMailAdapterBean.ejbCreate() throws javax.ejb.CreateException method on bean instance com.sap.aii.adapter.mail.ejb.XIMailAdapterBean@243be1e1 for bean sap.com/com.sap.aii.adapter.mail.app*xml|com.sap.aii.adapter.mail.ejb.jar*xml|XIMailAdapterBean; nested exception is: javax.ejb.CreateException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Failed to load messages into Queue AFWSend from database. Reason: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection. Reason: the thread of component "ejbContexts/sap.com/com.sap.aii.adapter.mail.app/com.sap.aii.adapter.mail.ejb.jar/XIMailAdapterBean" in application "sap.com/com.sap.aii.adapter.mail.app" is currently associated with a restricted resource set and it is not allowed to get connection within it.
After that whenever it is trying to process a message its throwing the below error :
exception caught during processing mail message [588]com.sap.aii.af.lib.mp.module.ModuleException
Has anybody faced thsi error before? Please help!!!
Thanks

Hi VR
Have you tried swapping by Payload name?
Please try it out with the following configuration, and remove any extra lines - there are duplicate key names and values in your configuration.
You should be able to see the successfully swap by payload name in the audit log as shown below.
Rgds
Eng Swee

Variable Transport Parameters in Mail Sender

Did anyone ever successfully use the "Variable Header XHeaderName1" in the mail sender adapter (IMAP4)?
We have two mail sender channels which require a slightly different mapping. My idea was to define a value for the field "Variable Header XHeaderName1" and evaluate that in the mapping. But the value is not passed into the SOAP header, I can configure what I want. I turned on "Adapter spec.attributes" and "Variable Transport...".
So I cannot access the field value in the mapping.
Now I evaluate the dynamic configuration field "SUser", that works, but that's only a workaround.
So either this is a bug in the system (XI 3.0 SP 21) or the documentation is wrong.
We are using an attachment, is that the problem ? "Use Mail package" off/on does not change anything.
Any ideas ? No general links to the documentation please.
CSY
Edited by: Christian Sy on Aug 15, 2008 8:48 AM

I think the DynamicConfigurationBean would help in this scenario.
You can assign a constant value in sender channel and use that constant for the determination of the mapping.
Regards
Stefan

Mail sender adapter POP server not configured for URL access

Hi Experts,
I have a Mail --> PI --> R/3 scenario and I am configuring the Mail sender adapter for POP3. The issue is that the POP server is not configured to be accessed via a URL and hence the URL pop://hostname/ is causing the following error at runtime:
_1. When I use pop://Fully qualified host name/
_Error: exception caught during processing mail message; java.net.UnknownHostException
_2. When I use pop://IP address of host/
_Error: exception caught during processing mail message; java.net.SocketException: Connection timed out:could be due to invalid address
I am able to ping the POP3 server from the PI server using both the FQDN and IP address.
Can someone please help.
Thanks,
Shobhit
Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM
Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM

Hi Shobhit
Check with these notes:
804102
xi 3.0 mail adapter with pop3 user authentication problem
810238
XI 3.0 Mail Adapter for POP3 may not report some errors
also check mailserver security settings ...
Connection refused occures when XI cannot connect
in most cases so try checking it again , maybe some ports are not opend on the firewall
Thanks
Edited by: Abhishek Agrahari on Jul 14, 2009 11:44 AM

Prob in PO smartform mail sending

Similar Messages

Maybe you are looking for