Prob in reconcillation of challan

All SAP Gurus,
We are having following error while reconciliation of subcontracting challan.
Material XXXXXXXX is not assigned fully, short by XX KG
Message no.: 8I574
above prob. comes when we split GR  quantity in batches
while reconciliation system not assign quantity to 2nd line item and gives mention error
pls help
Regards,
Vipin

Hi Vipin,
Yes this type of error will trigger when there is mismatches between GRN qty and Isuue qty with batches......Check whether the GRN qty and issued qty are same against the Challan number which you had captured while GRN.........
And also check the configuration part if everthing is fine(EI item).........
If everything is fine then i think better to Post to SAP.

Similar Messages

  • How subcontracting challan is manged in multilevel subcontracting process??

    Hi Gurus,
    ***How subcontracting challan is manged in multilevel subcontracting process??
    **In this scenario  *** when we send material to sub con vendor A1 for  job work,with this we create subcon challn(J1IF01) & send it to vendor, when this vendor  completes his job,he directly send this matrl to subcon vendor to B1 for the finishing work, after this vendor B1 will directly send finished matrl to company***
    Here - how the subcontracting challan is managed?? please guide.

    Hi,
    The challan is also widely known as the 57F4 challan, after the law under which it was defined up until the 2000 budget. This law has now been superceded by a new one, 57AC. The challan consists of a header and line items. The header, in addition to T-code is J1IF01 to create subcontracting challan. organizational data, allows you to enter:
    Preprinted number
    Additional data
    Identification marks
    Nature of processing
    Furthermore, each challan has two numbers, an internal document number and a challan number, which the system assigns to the challan when you save it. From a business perspective, this is the most important number. Each challan also has a status, which shows you what stage in processing it is at.
    The line items are copied across from the transfer posting when you create the challan. You can also enter additional data for each item
    T-code for completing the challan is J1IF13. You use this function to close a challan completely after all the materials have been accounted for. If a challan's return date has elapsed, and thus your right to the CENVAT credit, you use it to reverse the excise credit u2013 or, should your subcontractor return the goods subsequently, to re credit the excise credit
    Reconcillation of challan (J1IFQ): Once a subcontractor has processed your materials and returned them to you, you match the items in the challan against those that have been returned . I hope this will resolve your issue. Thanking you.

  • Shortage qty  - sub-contract process

    hi,
    In sub-contract process:
    Vendor  suppose to return - 10 qty
    but, we received only 8 qty.
    Vendor has accepted to pay For shortage 2 qty.
    1. How to address the above scenario?. (exciseable material)
    reg
    mrs

    Dear ,
    case 1) IF GR NOT DONE YET:
    do the GR and , at the time of GR increase consumption qty.from 8 to 10.
    that means u have comsumed more than required .then raise the debit note for loss.
    reconcille the challan by the same GR doc and complete the same.
    Case 2)IF GR is allready done.
    reconcille the challan by GR document,then do 542 for remainning 2 qty.re4concille the challan by dat document.and complete the challan.
    then take a physical inventory of that material for perticular storage location and post the negative difference .syatem showa that as a loss for u then raise the debit note for the same.
    regards,
    sujit borse

  • Run time error while reconcillation for sub contracting challan

    Hi,
       Gurus please solve this issue ,
       When i am trying to reconcillation for sub contracting challan against the GR DOC number.When we are assing the quantity for challan and save at that time i am getting abap dump

    Analyse in ST22
    U may take abaper help

  • Sub contracting challan reconcillation

    Hi Friends,
                                 I am doing the subcontracting for sales order
    1. I have created the po with account assignment E
    2. Transferred the material from main store to sub contracting store
    3. created sub contracting challan
    3. created goods reciept and in that i have given reference of sub contracting challan
    4. now i want to do the reconcillation , but system is giving error message as " challan material is different from material document..
    so please suggest , what i have to do? please reply....

    Hi
    Since you are transfering the material to subcontracting store, which is under your premises.You cannot do a reconsiltion.
    If you have seprate subcontractor ,then its possible to do the reconsilation.
    follow the  below procedure subcontracting for sale order :
    1.created the po with account assignment E
    2. Issue the material to Subcontractor by creating a new mvt type 541 E. You cannot issue the sale order stock to subcontractor with 541 mvt.
    3.Create Subcontracting challan
    4.Do GR
    5.Do the reconsilation
    Thanks & Regards
    Dhanapal.

  • Re -Reconcillation of subcontracting challan against "102" mov type mat doc

    Dear All,
    While we are doing the reconcilliation of the Material document (mov type-"102" ) against the subcontracting challan (ALREADY fully reconcilled against 101 material document, but not compeleted), then system is NOT allowing us to do the reconcillation, requirement is to reduce the qty assignment  in already reconcilled challan, as we have reversed the material document
    1.) When we have assigned the 102 movement type to movement type group to 0001( Issue movement type group)
    then system is giving an error message : 8I567-Challan not valid, Material doc. is valid for another scenario during J1IFQ.
    2.) and when we are assigning the 102 movement type to movement type group 0002( Receipt movement type group) , then system gives error message : 8I574 -Material XXX is not assigned fully, short by YYY KG
    Please suggest the right way of doing it.
    Thanks & Regards
    Nitin Chhabra

    Hi
    If a challan is reconciled it should not be opened again. That is illegal. You need to do subsequent adjustment if you want to alter your consumption in subcontract. If you do 102 and reverse your consumed material,You need to include 544 movement type in your movement type grouping then You need to create a new 45a challan.
    Regards
    Antony

  • Reconcillation of sub con challan

    Hi,
    I am getting an error while performing J1IFQ,the error is "excise doc is posted later to material doc",msg no:81576.Can anybody suggest me what may be the cause for the error.

    By product is end result of process along with material B.
    You are not sending by product while issuing material to vendor using 57F4 Challan.
    So it wont' appear in challan reconcillation.

  • Reconcillation of subcontracting challan

    hi every body
    my problem is about reconcillation of subcontracting challan.
    let 10 kg material named A is to be manufatured by 16 kg of material B. NOW i created a sub contracting po ,541 tranfer posting, j1if01subcontracting challan, then i do good receipt fpr 10 kg A material and assign the subcontacting chhalan to the good receipt.now quality department reject 5 kg A MATERIAL FROM 10 KG A material and send 5 kg A material to the vendor with movement type 122. with this also 8 kg of material B is also returned with movement type 544 with stock provided to vendor o .
    now when we chack with MBLB 8 kg of material B is with subcontractor.now when we reconcile quantity with J1IFQ .
    it shows and give the warning massage that  8 KGof B MATERAIL is short.it does not allowed to save
    however 8 kg of material B is with subcontractor tehn it should be reconcilled with rest of 8 kg of B material. why it does not save. is this problem of patches. please give solution this is urgent requirement.points will be rewarded.

    I want to give it an attempt
    while reciving the mat A total 16KG of B is issued, so stock of B is reduced by 16 KG.
    Now you did 350 & 122 for rejection and dispatch of mat. A with 5 KG that means for Mat B 8 KG made, so we get 8 KG of B back ( which is in vendor place)
    but while doing reconcilation the stock of B is required which is shot by 8 KG. let teh cycle to complet means recive the repaired the material A then do reconcilation. system will not so this error.
    simutate in test once to check it now as it seems you r in hurry.
    Regards

  • Subcontract challan reconcillation problem

    Dear All,
    We are getting the following message while reconciling Subcontract challans  " Material XXXX is not assigned fully , short by X nos ".  Is it because  if we post a single GR referencing two Purchase orders for same vendor with two different challans , will it be a problem during reconcillation ? since while sending components to vendor we create single challan wrt to 541 mat document.
    Thanks in advance
    Benny

    Hi All,
    After testing in quality system , i found that if GR 105 mvt type was done w.r.t  two different purchase orders for same vendor referencing two challans , the system issues the error message " " Material XXXX is not assigned fully , short by X nos " while trying tor reconcille in J1IFQ.
    Is this a standard SAP behaviour ?
    So for validation purpose i  cancelled the 105 mat doc and posted two different GR's referencing two challans and i was able to reconcile successfully.
    Any idea if the challan reconcillation will work only for one to one combination and i.e., one PO and its 541 mat doc /challan and one 101/105 mat doc.
    Kindly let me know if you have come across this cases.
    Thanks
    Benny

  • J1IFQ- subcontracitng challan Reconcillation

    HI All
    when i try to reconcile the SC challan system says no document excists. but iam able display the SC challan and it is Status P(Posted)i.e open for reconcillation.
    Processing steps which i performed.
    ME21N Created PO
    ME2O- Strock transfered 541 movent type
    J1IF01- Created SC challan with reference to the material doc(541)
    MIGO - GR 101
    J1IFQ- facing problem that the doc does not exists
    and it is working fine in my development system.
    Please guide me on this.
    Regards
    Srinvas

    Hi
    In  J1IFQ please enter the material document no for the material what you have moved in  541 movement to the vendor
    G.Ganesh Kumar

  • Sub Contractor challan Reconcillation after subsequent adjustment

    Dear Friends,
    I am sending 1 kg of material to receive back 1kg of material the sub contractor uses .90 kg to make 1 kg of the reqd material. So I do subsequent adjustment after MIGO for under consumption of  0.10kg
    Now after doing subsequent adjustment, while  doing  reconciliation in J1ifq should  I change the assigned qty to 0.90 kg ( as there was under consumption of 0.1kg ), I tried changing the assigned qty to 0.900  but its showing me the message u201Cmaterial xxx is not fully assigned, short by 0.10 kg& itu2019s not letting me reconcile.
    Kindly suggest the correct procedure for reconcillation & sub con challan completion after subsequent adjustment.
    Thanks

    Hello,
    Please check the process supported by SAP for                   
    subcontracting with and without duty payment in the following link:                                                                               
    http://help.sap.com/saphelp_erp60/helpdata/en/09/ebf138cdd78a4be10000000     
    a114084/frameset.htm                                                                               
    It is quite helpful for challan reconciliation issues.                                                                               
    Keep in mid that for challan subcontrating you should perform the            
    following steps:                                                                               
    1) Create Sub contracting PO                                                 
    2) Create MB1B ( 541 mov)                                                    
    3) Create Challan from J1IF01 with reference to material document            
    4) Create GR using MIGO sub cont PO. ( faced error )                                                                               
    Please be ensure that the following note is already applied in your          
    system:                                                                      
    1423896 - The subcontracting challan validation - MIGO                       
    Please chek if you have set the movement types     
    541 and 541 O as relevant for creation of challan. Also, you ha       
    ve to set the number of line items in a challan to be only 1 in the customi       
    sing node 'subcontracting attributes'.                                         
    So the system will create 1 challan per line of the transfer posting           
    document as it finds both 541 and 541 O movements.                                                                               
    If you do not want the system to create challan for 541 as is normal           
    then remove the movement type 541 from movement type group 0001. Also          
    remove 101 from movement type group 0002.    
    I hope it helps you.
    Regards,
    Fábio Almeida                                 
    Mm Consultant

  • 57FC Challan Reconcillation Completed.

    From last 4 days while creatiing GR with 101 movement agaisnt subcontact purchase order, we are not able to enter subcontract challan, system is giving error. " Document Number .......... not valid for reconcillation : already completed.
    After checking table J_1IEXCHDR in T-code SE16N, it has been observed that all 57FC challan has been changed on 07.03.2010 by one of our SAP user id. Status field is 'C' completed for all 57FC challan. Due to this system is not allowing to enter 57FC doc. number in MIGO refer subcontacting challan.
    User has used the following T-codes on 07.03.2010, also he is not able to tell how this completed indicator status has been updated to all 57FC challan.
    J1IF11
    J1IF12
    J1IF13
    J1IFQ
    J1IFR
    Please give your valuable comments on above, we want to find out How the mass changes has happen to 57FC challans.
    Regards,
    Shekhar Gaikwad

    hii
    SOme time this will happen in out statndard SAP system.
    This because of program problem with other scenario or some indirect affect in system will cause this kind of problem.
    So better take of help of technical consultant and do changes in the table of challan status , do necessary changes and then follow the reconciliation procees .
    Revert any clarification.

  • Sub Contracting Challan Error during Reconcillation

    Dear All
    While doing Sub Contracting quantity reconcilation in J1IFQ i am getting the following error."Challan material is different from material document"
    I am entering the correct (101)material document only. In MIGO itself i have reffered challan number. But still iam getting the error.I am working in ECC 6.00.
    Kindly guidr me.
    Thanks
    Shobana

    hi,
    Go to OMJJ, select the field "movement type" and press enter
    Enter movement type "311" and double click on "Field selection (Enjoy)" under Dialog Structure on left side.
    here "New Entries" and add field "LIFNR" (Vendor)
    Now in MIGO, at the time of transfer posting of components using movement type "311 P", specify the vendor code of the Subcontracting PO (i.e. Subcontractor)
    Now create Subcontracting Challan in J1IF01 for material document of 311 P movement type.
    Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0001", Movement Type "311 P" should be maintained.
    Then do GR against PO and refer the Subcontracting Challan here.
    And then do reconciliation in J1IFQ for the GR Document against Subcontracting Challan.
    Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups > here for Movement Type Group "0002", Movement Type "543 P" should be maintained.
    Regards
    Priyanka.P

  • Reconcillation of gr with subcontracting challan

    hello gurus
    in susubcontracting when i reconcilled gr quatity through j1ifq
    system is giving error massage that
    challan material is different from material document. so where could be the problem

    Hi vishal,
    i hv maintained the mvmnt type groups as 0001 goods issue and 0002 as goods receipt in the subcontracting attributes.
    And assigned 541 and 543 in 0001 and 101 & 542 in 0002.
    Still getting the error as "challan material is different from material document"
    Hi krishan,
    u solved this issue?
    Thanks
    Kumar

  • Reconcillation of gr with challan

    hi everybody
    i am processing subcontracting process . in bom i have maintained scrap material.
    but after gr when i reconcile quantity of challan with gr decocument here scrap is not coming and it is showing o in scrap quantity.pleae suggest.
    regards
    k.chhikara

    Hi vishal,
    i hv maintained the mvmnt type groups as 0001 goods issue and 0002 as goods receipt in the subcontracting attributes.
    And assigned 541 and 543 in 0001 and 101 & 542 in 0002.
    Still getting the error as "challan material is different from material document"
    Hi krishan,
    u solved this issue?
    Thanks
    Kumar

Maybe you are looking for