Prob installing snmpdx patch on 2.6

Anyone know why I'd be getting this message when I try
to install patch 106787-17 (snmp vulnerability)?
Checking installed patches...
One or more patch packages included in
106787-17 are not installed on this system.
I did a pkginfo -il on all the packages in the
directory and they are (4 of them) installed.I had the same problems when I tried to install the patch on our E250's running 2.6 and 2.7,
Solaris 8 was no problem. I cehcked (like you did) that I had indeed all the packages installed.
I was however in the lucky situation that I could just disable SNMP as it was not doing anything useful...
I think if you look in the patch that you could perhaps just replace the files manually and then restart the service. (I guess it's a good idea to try on only one host first;)
Good luck,
Thomas

Similar Messages

How to install a patch in oracle apps

Hi,
Please provide me the steps to install a patch in oracle apps(unix platform)

Welcome to the forums !
Pl post EBS questiosn in the EBS forms http://forums.oracle.com/forums/category.jspa?categoryID=3
Pl see these MOS Docs for answers to your question -
130608.1 - adpatch Basics
174436.1 - Oracle Applications Patching FAQ
HTH
Srini

How to install a patch from local JAR file...

Newbie question -
I'm getting an error when deploying an MDB on WL 10.0 - someone else had also come across that same error and he sent me a patch (CR326377_10GA.jar) that should fix it.
How do I install that patch on my local WinXP installation of WL - do I just add an entry to the CLASSPATH of the startweblogic.bat file? I'm a little concenred about the order of JARs there... is there a better way?!
I tried looking up this patch using the Smart Update utility - but I could not find it there - how do I do it manually?
thanks,
james
Edited by jdepaul at 03/20/2008 4:13 PM

I believe you can contact support and get a patch id and passcode for this
patch and then install using smart update.
StartWeblogic.cmd will also look for a weblogic_patch.jar in the patch
directory. I.e. something like
d:\BEA10\patch_wls100\profiles\default\sys_manifest_classpath\weblogic_patch.jar
Cut/paste the directory from the output of startweblogic.cmd and then create
the directory and copy the patch to the right filename.
Or you can put the patch before any other jars in the classpath.
Peter
<James DePaul> wrote in message news:[email protected]..
Newbie question -
I'm getting an error when deploying an MDB on WL 10.0 - someone else had
also come across that same error and he sent me a patch (CR326377_10GA.jar)
that should fix it.
How do I install that patch on my local WinXP installation of WL - do I just
add an entry to the CLASSPATH of the startweblogic.bat file? I'm a little
concenred about the order of JARs there... is there a better way?!
I tried looking up this patch using the Smart Update utility - but I could
not find it there - how do I do it manually?
thanks,
james
Edited by jdepaul at 03/20/2008 4:13 PM

Error while installing a patch for Mainwin 5.0.2 on Solaris 2.8

Hi,
I am relatively new in this field, so i apologise for any slip-ups.
We use a Solaris 2.8-SPARC server. I was given an external drive which contained the porting software Visual Mainwin 5.0.2 and was told to install it from the drive. On checking it, i found that the entire folder structure of the software was damaged, i.e. every file of the software was changed to uppercase. UNIX being highly case-sensitive, i manually changed each and every file present in the software directory to lowercase and then ran it.
The software ran fine, it got installed and the license server was also up. the licenses were also nicely distributed. everything was fine until i was asked to install the patch 'vmw502_sunos5_HF1.sh'. While installing i got the following output :
# sh vmw502_sunos5_HF*
Extracting installation package to "/tmp/mwspselfextr27624".
Please stand by ... Done.
=====================================================================
Visual MainWin Patch Installation
HF1 for VMW 5.0.2 <sunos5> 24-Jul-2003.14:01 Cycle115
=====================================================================
***Error: cannot find file
/export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini
Something wrong with your Visual MainWin installation - aborting
when i checked the installation directory, i found that the file 'mwversion.ini' was present inside the directory 'mwver'. I cant see any reason why the patch is not recognizing the file.
Can anybody help?? Any kind of help will really be appreciated.
-SD

Hope you already tried: ls -l /export/home/tools/solaris/env/mainsoft/../mwver/mwversion.ini If ls returns the file name, try running the script under truss to find some clues.
% truss -f -vall -rall -wall -o /tmp/mwpatch.log sh vmw502_sunos5_HF*

Unable to deploy BPEL Process -- Says If you have installed a patch to the

I have a simple BPEL process that calles an ESB flow deployed in the same server.
I am facing the following issue when trying to deploy the BPEL process.
The ESB flow is deployed and is working perfectly.
Configuration:
JDeveloper 10.1.3.5
SOA Suite 10g Release 3
Downloaded from:
http://www.oracle.com/technetwork/middleware/ias/downloads/index.html
Here I downloaded this file:
http://download.oracle.com/otn/nt/ias/101310/soa_windows_x86_101310_disk1.zip
When I compile the BPEL project, it compiles fine:
Compiling...
Compiling C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\bpel\OrderDistributionProcess.bpel
*[BPEL Compiler] Initializing compiler for first time use...*
BPEL suitcase generated in: C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\output\bpel_OrderDistributionProcess_v2011_09_01__39889.jar
copying bpel/OrderDistributionProcess.wsdl to output directory
copying bpel/OrderSystem_OrderSearchService_RSRef.wsdl to output directory
converting, through native2ascii, build.properties to output directory
*[11:05:04 AM] Successful compilation: 0 errors, 0 warnings.*
Now when I choose (Right Click on Project) -> Deploy -> BPEL Process Deployer,
I get this error:
Buildfile: C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\build.xml
[java] Java Result: 1
validateTask:
[echo]
| Validating workflow
[validateTask] Validation of workflow task definitions is completed without errors
deployProcess:
[echo]
| Deploying bpel process OrderDistributionProcess on localhost, port 8888
[deployProcess] Deploying process C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\output\bpel_OrderDistributionProcess_1.0.jar
BUILD FAILED
C:\JDeveloper\10gMywork\OrderProcessingApp\OrderDistributionProcess\build.xml:78: A problem occured while connecting to server "localhost" using port "8888": bpel_OrderDistributionProcess_1.0.jar failed to deploy. Exception message is: ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "OrderDistributionProcess" (revision "1.0"): null.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.at com.collaxa.cube.engine.deployment.CubeProcessHolder.bind(CubeProcessHolder.java:285)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:804)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:670)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:317)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:339)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Total time: 6 seconds
I checked the host port, i.e., 8888 here, from JDeveloper; and it says that the tests passed.
Help me please.

Balu,
it seems you are trying to deploy example for B2B. Please check your B2B is up, AQ are up and accessible and you can also check your SOA dehydration DB .
You can check some setup and dexample at: http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TU_001_B2B_BPEL.pdf
-JMehta

Dynamic file name - Components to be installed in patch required for SP12

Dear All ,
1)Plz let me know what is the prerequisites for installing SP12 Patch in XI i.e <b>what all components do I need to install for this</b> . Currently I am using SP 09 and I am facing problem related to Dynamic file in file adapter .
2) While installing the components for this patch , is it going to affect my pre-configured scenarios .
Thanks in advance
Prabhat

Hi Danny!
So you are saying that this is a valid path specification in Windows? I did not know this. And I do not remember to ever have seen this before with Java.
Is there a reason why this "abbreviated" form is used in Java?
Has this changed recently, or did I simply never found it before?
Can this be behavior be changed to the complete path form? I like to call 'get[Absolute]Path()' in log messages and test cases, but want to see the complete path in such a case. I would like to avoid getCanonicalPath() in such cases, because this method declares an exception.
Cheers,
Michael

How to install a patch on remaining ISE servers

Hello,
I have a cluster of ISE servers in version 1.1.4. I patched it with Patch 4.
Then, I added more ISE servers in version 1.1.4. How to I patch these new servers to Patch 4 ? In the status page, it displays correctly that some servers have the patch installed while the new ones do not have it installed. But I don't find the way do install the patch on the remaining server ?
Can anyone tell me how to proceed ?
Thanks,
David

If you need to install the patch on one or more secondary nodes, ensure that the nodes are up and repeat the process from Step 1 to install the patch on the remaining nodes.
Please go through the link for the installation steps and form the page 119.
http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_ug.pdf

Unable to install Acrobat Patch 8.16 on Mac. What can I do?

Unable to install Acrobat Patch 8.16 on Mac. What can I do?

What system Version??
(Please note information is given by an Experienced User of Acrobat. I am not an employee of Adobe.)

Help: Installing ODM patch 10.1.0.3.1 on Win 2K?

I am trying to install ODM patch 10.1.0.3.1 (ref 3978002 on metalink) on Oracle 10g RDBMS 10.1.0.3.0 on Windows 2K.
When I run the patch installation script dm10131_patch.bat, the script hangs and never completes.
I looked at the script and it appears that the following command within the patch10131.sql is hanging:
execute dbms_java.grant_permission(UPPER('DMSYS'),'SYS:java.io.FilePermission','dm/lib/odmapi.jar','read');
Any help on how to get this patch to install is greatly appreciated.
Regards,
Shah

Hi,
I've the same problems after installing 10.1.0.3-patch on my W2K-DB and then ODM 10.1.0.3.1.
There are several invalid objects in the sys-schema:
- ODM_ABN_
- ODM_CLUSTERING_UTIL
- ODM_KM_CLUSTERING_MODEL
- ODM_MINING_TRANSFORMATION
- ODM_OC_CLUSTERING_MODEL
- ODM_SUPERVISED_MODEL
I cannot compile them, I get such errors:
Line # = 25 Column # = 41 Error Text = PLS-00201: identifier 'INTEGER_TAB_TYPE' must be declared
Line # = 25 Column # = 4 Error Text = PL/SQL: Declaration ignored
Line # = 26 Column # = 40 Error Text = PLS-00201: identifier 'NUMBER_TAB_TYPE' must be declared
Line # = 26 Column # = 4 Error Text = PL/SQL: Declaration ignored
Line # = 33 Column # = 35 Error Text = PLS-00201: identifier 'CELL_TYPE' must be declared
Line # = 33 Column # = 4 Error Text = PL/SQL: Declaration ignored
Line # = 34 Column # = 43 Error Text = PLS-00201: identifier 'CLUSTER_NODE_TYPE' must be declared
Line # = 34 Column # = 4 Error Text = PL/SQL: Declaration ignored
Line # = 35 Column # = 47 Error Text = PLS-00201: identifier 'CLUSTER_INTERNAL_TYPE' must be declared
Line # = 35 Column # = 4 Error Text = PL/SQL: Declaration ignored
Can anybody help me please?
Thanks
detlef

Sol9 12/03 OS full install + 9_Recommended patch problem

Installing Sol9 12/03 on a SunFire 280r then installing the most recent 9_Recommended cluster (04/01/2004), this is the output during installation of 9_Recommended;
Installing 113718-02...
Installation of 113718-02 failed. Return code 35.
Installing 113574-03...
Installation of 113574-03 failed. Return code 35.
Looking over SunSolve I see these packages have been withdrawn and backed out to a previous revisions.
Sol9 12/03 OS installs;
113718-03
113574-07
9_Recommended from 04/01/2004 tries to installl;
113718-02
113574-03
SunSolve shows as current;
113718-02
113574-03
Here is the uname -a;
# uname -a
SunOS hostname 5.9 Generic_112233-11 sun4u sparc SUNW,Sun-Fire-280R
How can I backout or down version an OS installed package ?

Unjar your files and you might see the premissions are not set for the post or pre scripts. I am not sure if this is a feature or there for protection in forcing one to install the patches by had , if you down load the zip version the perm are probable set.

Can't detect my build-in touchpad after installing grub patch

Hi
I have installed on my HP Compaq nx8220 solaris 10 01/06 and I had a problem with USB that was solved by installing the pathces required for installing recomanded patch cluster.The problem is that after installing those patches and respecting the README files from every patch my touchpad is not recognise anymore.The mouse should be found in /devices/isa/i8042\@1\,60/mouse\@0.
Can anyone help me

Hi
I have installed on my HP Compaq nx8220 solaris 10 01/06 and I had a problem with USB that was solved by installing the pathces required for installing recomanded patch cluster.The problem is that after installing those patches and respecting the README files from every patch my touchpad is not recognise anymore.The mouse should be found in /devices/isa/i8042\@1\,60/mouse\@0.
Can anyone help me

Problem: installing Recommend Patch Cluster: patch 140900-10 fails

I don't know if this is correct location for this thread (admin/moderator move as required).
We have a number of Solaris x86 hosts (ie 4) and I'm trying to get the patched and up to date.
I obtained the latest Recommended Patch Cluster (dated 28Sep2010).
I installed it on host A yesterday, 2 hours 9 mins, no problems.
I tried to install it on host B today, and that was just a critical failure.
Host B failed to install 140900-01, because the non global zones rejected the patch because dependancy 138218-01 wasn't installed in the non global zones.
Looking closer, it appears that 138218-01 is for global zone installation only; so it makes sense that the non global zones rejected it.
However, both hosts were in single user mode when installing the cluster and both hosts have non global zones.
140900-01 installed on host A with log:
| This appears to be an attempt to install the same architecture and
| version of a package which is already installed. This installation
| will attempt to overwrite this package.
|
| Dryrun complete.
| No changes were made to the system.
|
| This appears to be an attempt to install the same architecture and
| version of a package which is already installed. This installation
| will attempt to overwrite this package.
|
|
| Installation of <SUNWcsu> was successful.
140900-1 failed on host B with this log:
| Validating patches...
|
| Loading patches installed on the system...
|
| Done!
|
| Loading patches requested to install.
|
| Done!
|
| Checking patches that you specified for installation.
|
| Done!
|
|
| Approved patches will be installed in this order:
|
| 140900-01
|
|
| Preparing checklist for non-global zone check...
|
| Checking non-global zones...
|
| Checking non-global zones...
|
| Restoring state for non-global zone X...
| Restoring state for non-global zone Y...
| Restoring state for non-global zone Z...
|
| This patch passes the non-global zone check.
|
| None.
|
|
| Summary for zones:
|
| Zone X
|
| Rejected patches:
| 140900-01
| Patches that passed the dependency check:
| None.
|
|
| Zone Y
|
| Rejected patches:
| 140900-01
| Patches that passed the dependency check:
| None.
|
|
| Zone Z
|
| Rejected patches:
| 140900-01
| Patches that passed the dependency check:
| None.
|
| Fatal failure occurred - impossible to install any patches.
| X: For patch 140900-01, required patch 138218-01 does not exist.
| Y: For patch 140900-01, required patch 138218-01 does not exist.
| Z: For patch 140900-01, required patch 138218-01 does not exist.
| Fatal failure occurred - impossible to install any patches.
| ----
| patchadd exit code : 1
| application of 140900-01 failed : unhandled subprocess exit status '1' (exit 1 b
| ranch)
| finish time : 2010.10.02 09:47:18
| FINISHED : application of 140900-01
It looks as if the patch strategy is completely different for the two hosts; both are solaris x86 (A is a V40z; B is a V20z).
Trying to use "-G" with patchadd crabs the patch is for global zones only and stops (ie it's almost as if it thinks installation is being attempted in a non global zone).
Without "-G" same behavior as patch cluster install attempt (no surprise there).
I have inherited this machines; I am told each of these machines were upgraded to Solaris 10u6 in June 2009.
Other than the 4-5 months it took oracle to get our update entitlement to us, we've had no problems.
I'm at a loss here, I don't see anyone else having this type of issue.
Can someone point the way...?
What am I missing...?

Well, I guess what you see isn't what you get.
Guess I'm used to the fact USENET just left things formatted the way they were :-O

TS4088 What happens if problems persist after I install the patch?

I've installed the software patch a few times and find that for a few days to a few weeks the intermittent loss of video seems fixed, and then it will come back with several blackouts in a short span of time, which prompts me to install the patch again...
Anyway, I'm wondering if there's a chance that upgrading my OS will fix it? Or is it just time to go to Genius bar and be w/o my machine for a while?

The information is here:
http://support.apple.com/kb/ts4088
Changing OS will not solve the issue. A genius bar appointment is the best option.
Ciao.

Error installing interim patches - Oracle 10 - 10.2.0.4.0

Hi experts!
We are currently installing an ERP 6.0 system on SOLARIS 10. After installing Oracle 10.2.0.4.0 and respective patch set, the follpwing error is obtained while trying to install interim patches. Actually the first one was installed without problems...but starting from the second one....the bellow error is logged.
This is the log in /oracle/DB2/102_64/cfgtoollogs/mopatch:
(A) Comparing object file "/oracle/SID/102_64/MOPatch/mopatch-IJaqhf/5561212/files/lib/libserver10.a/kkj.o" to the object entry "kkj.o" inside the .a file "/oracle/SID/
102_64/lib/libserver10.a"
2 files are identical? TRUE
Cleaning up "/oracle/SID/102_64/.patch_storage/verify/jar" under "/oracle/SID/102_64", "verify".
Cleaning up "/oracle/SID/102_64/.patch_storage/verify/archive" under "/oracle/SID/102_64", "verify".
Files check OK: Files from Patch ID 5561212 are present in Oracle Home.
The local system has been patched and can be restarted.
OPatch succeeded.
Cannot clean up unpacked patch. Continuing.
Processing patch "p5561212_10204_Solaris-64.zip"...done.
Processing patch "p5747462_10204_Solaris-64.zip"...(2 of 47)
Processing patch "p5747462_10204_Solaris-64.zip"...failed.
Reason: Cannot clean up temporary patch staging directory.
Could you please let know how to solve this issue? What is the "temporary patch staging directory" the mopatch is not able to clean up? Btw...the process is being run under oraSID user an permissions seems to be ok.
Thanks and regards

Hi Diego,
Processing patch "p5747462_10204_Solaris-64.zip"...failed.
Reason: Cannot clean up temporary patch staging directory.
Are the permissions for these zip files and the directory containing this file OK ?
I think OPatch/MOPatch program is trying to access the directory /oracle/SID/102_64/.patch_storage, once try to verify the permissions of '.patch_storage'
Thanks

Error while installing oracle patch set 10.2.0.4

Hi Gurus,
I am installed oracle 10G successfully but while installing oracle patch set 10.2.0.4. it is given the following error.
OUI.exe has encountered a problem and needs to close.
We are sorry for the convenience.
i am installing ECC6.0 on window xp SP3 platform.
Please give me solution ASAP.
Regards
Hemant Gade
Basis Consultant

Hi,
I have solved this issue my self.
It was purely windows registry error.
thanks for your help.
Regards
Hemant

Prob installing snmpdx patch on 2.6

Similar Messages

Maybe you are looking for