Prob: No sound - Laptop: DV1000 - OS: Win XP Pro SP2 - Please help!!!

Hi,
I have just re-imaged my laptop DV1000 without the driver CD. Everything seems to be fine but the audio. I downloaded two driver files from HP UK support but none of them worked. Could somebody please give me some hints?
Thanks a lot,
Bob

Hi Bob,
I'm having the same problem - although I'm on Windows 7 now. 
There seems to be a registry fix for XP, check this link out: http://forums11.itrc.hp.com/service/forums/bizsupp​ort/questionanswer.do?admit=109447626+124204183233​7+28353475&threadId=1274952 
I haven't tried it out yet as my registry is named CSD Version (maybe a typo?), and the value is hex = 0... 
Good luck! 
aL

Similar Messages

  • Problem installing Win XP Pro SP2 on 2008 Mac Pro running 10.6.8

    Okay, I have never setup or ran a bootcamp partition so I apologize in advance for my ignorance on the subject. I have been attempting to install win xp pro (SP2). I am using the Boot Camp Assistant  v3.0.4. I have created a 32GB FAT32 partition and at the point I click Continue Installation (with the XP Pro disc in the drive) the computer reboots to supposedly install.
    What happens instead is I get a revolving censorship/ban circle icon, folder with question mark and apple logo. It just continuously will flash between those 3 icons until I restart.
    Here's what I've tried...
    -removing all other drives. I'm attempting to install on the boot drive which is in bay 1.
    -removed all external devices only things plugged in are my usb keyboard and DVI monitor
    -deleting and recreating the partition
    -I have the xp pro cd in the top drive and the snow leopard cd in the bottom drive (both internal cd/dvd drives)
    Computer:
      Model Name:          Mac Pro
      Model Identifier:          MacPro2,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          3 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per processor):          8 MB
      Memory:          10 GB
      Bus Speed:          1.33 GHz
      Boot ROM Version:          MP21.007F.B06
      SMC Version (system):          1.15f3
    No matter what I try I am met with the same results. I have held down the option key and manually selected the windows xp cd. It seems to be booting but immediately turns off my DVI monitor which, well, makes it impossible for me to actually know what is happening. I do have a nvidia GeForce 8800 which only has two DVI ports off the back. I do have the adapter and an old VGA monitor I could pull out of the attic but would rather not unless that is my only option. Can someone in the community please point me in the right direction?
    Many, many, many thanks!
    Curtis
    OKC, OK

    Update: my problem was solved by getting my VGA monitor out of the attic. Once windows was done and I ran the setup.exe off the Snow Leopard CD, all of the drivers were updated to allow me to switch back over to my apple cinema display.
    Also, I did need to hold down the option key to select the windows CD to install...and again to select the windows partition to boot but so far everything is going well with Bootcamp 3.0.4 and XP SP2...other than it is windows.
    -Curtis

  • URGENT Cannot install Ora9i rel 2 Client on Win XP Pro SP2

    Hi folks:
    I have a problem installing Oracle 9i in a "clean" machine with Win XP Pro SP2 with .NET 1.1 running on a P4@3GHz and 512MBytes of RAM and 30GBytes of HD free, when I start de UOI only appear de Oracle's splash screen and when I select install/Deinstall products, nothing happens (in the administrator task appear not response and close automatically).
    I read a lot of solutions about this here, always the same result, NOTHING.
    - I rename symcjit.dll to symcjit.old (of course i copied the installation CD at the oracle subdirectory to avoid long directory paths)
    - Install a JDK 1.3 and 1.4 (and deinstall them after and clean the registry)
    - I login on windows with a user name without rare characters.
    After trying all above and more that I've forgotten I try install a older version (8.1.7) but appear this message.
    "There was a problem opening the staging area. Please make sure the 'Source' you have specified is valid"
    of course the source is valid (products.jar) and I edited the oraparam.ini file to change the relative paths to absolute, but the same message appear.
    ¿I'm doing something wrong?¿incompatibilites between Oracle and Windows?
    Thanks for any help, I need to resolve this problem ASAP!

    Could it be a firewall blocking a port that Oracle needs?
    Service Pack 2 for Microsoft Windows XP turns on the firewall by default.
    Unless, there is a conflict somewhere with the installation program and what you already have installed. Such as, do you have a version of some Oracle software already installed?
    Could it be a conflict with the Java runtime? The Oracle Universal Installer uses its own Java VM.
    Have you tried downloading the latest client software for Oracle 9.2 and trying that?

  • WRT350N + WMP300N = BSOD Crash on Win XP Pro SP2?

    Yes, the problem I am having is that with WRT350N + Wireless + WMP300N = BSOD Crash on Win XP Pro SP2.   Really, from what I can tell, WRT350N + Wireless = BSOD Crash on Win XP Pro SP2.   Yes, I know, a router shouldn't be able to crash a computer, PC drivers, PC misconfigurations do.
    However, my crashes didn't start happening until I switched to my WRT350N wireless router.  Actually, at that time I didn't even have the linksys WMP300N ... it was another wireless card.  Now I have the linksys WMP300N, and the crashes still happen.
    I updated my driver on my NIC to the latest version two days ago, and at the same time upgraded the firmware on the router to the latest and greatest.  You know what that did?  Instead of crashing my PC once every day or so I get crashes about 5 mins after I start my PC.
    I've tried using the linksys wireless configuration utility, and the Windows zero configuration, still crashes.  I've tried Wireless Mixed bode, BG mixed, G only, still crashes.   Different channels, still crashes.   I disabled Symantec Client Security firewall, still crashes.  Uninstalled SCS and used windows firewall, still crashes.   Disabled netbios and dynamic DNS registration on my adapter, still crashes.   Disabled wireless QoS on PC and router, still crashes.  Tried disabling and enabling (individually) Wireless AP isolation, frame burst, CTS Protection mode,  forced 54mbps rate ... still crashes.  I have no HD attached to the router.  I've disabled UPnP on the router, still crashes.
    You know what does fix the crashes?  Disabling my wireless adapter.  You know what else fixes the crashes?   Connecting to a different wireless router.
    I'm completely baffled.  Any ideas what I can try?  I'm an IT Consultant by trade, and have been working with PCs and networking in a professional capacity for over 8 years, so I have a decent amount of troubleshooting experience.   The BSOD doesn't say much, just equates to a hardware/driver fault ... but no indication what.   My crash dump analysis (full, not just minidump) also provides no data as to what driver).
    Thoughts?  As much as I hated my former Netgear, I'm about ready to even go back to that....
    Edit:  My PC is using DHCP, configured as a reserved address.
    Message Edited by TroyL on 02-20-2008 07:08 AM

    Hello, hopefully I can help you. Some things that resolved my issue were disabling some options in the advanced properties of my NIC (WMP300N) Even if you don't have the same NIC, you should probably have some similar options:
    -Manage Wireless Settings = Disabled (note: I disabled this since I'm using Windows to manage the settings)
    -Mixed Cell Support = Disabled
    -Minimum Power Consumption = Disabled
    -Power Save Mode = Disabled
    -Wake Up Capabilities = None
    -Bluetooth Collaboration = Disabled
    -40MHz Intolerant = Disabled
    Try disabling those things, and go from there ... good luck . With those settings, I haven't crashed in several months now. I don't know which setting it was fixed it, I haven't been brave enough to go playing with it again ... if it ain't broke, don't fix it, lol.

  • PC54G and MP54G2 in Win XP Pro SP2

    Hello, and thank you for reading my thread.
    I've got a MSI Mega 180 with a integrated MP54G2. In can see the Ethernet-Card in the "Device Manager", but it won't work. I've tried with the driver that comes along with the original package, and the newest that MSI offers on the web-sites. The files that can be downloaded, seems to be se same for PC54G and MP54G2; "MSI_WLAN_Software4.1.16.26.zip". I can't get this driver to work for the MP54G2 nor the PC54G. The reason why I'm talking about the PC54G is that I had that card from another PC, but the result when I install it into the Barebone is the same. Is there a known problem with this driver in SP2?
    - Eirik

    I tried it on a P4 3.2 ghz, ATI Radeon 9600 128 megs, Gigabyte Motherboard (don't remember wich one), over 256 megs DDR, 160 gigs hdd.  The second one was a Athlon XP 2200+, Ati Radeon 9250 128 megs, Gigabyte Motherboard GA-7VKMP, 80 gigs hdd, 512 megs DDR.  The third one is a P3 866, Ati rage Pro, Intel motherboard, 384 megs SDram, 40 gigs hdd.  They're all new installed win xp pro SP2 computers (after updates everywhere ex:graphic cards, windows etc...)  Really confused !!!  Tried in different PCI slots.  Do you think it's a card or chips (physically) problem, at your advice ?  I'm not at my first computer installation, and it's the first time I see this problem.  I'm in computers since 6 years and never seen that before.  Help me please...........

  • [TV@Plus] Can't install drivers in win XP pro sp2

    I can't install the drivers of that tv@nywhere plus.  I tried it on different computers = same results.  Tried the msi driver on web site = same results.  I have the following message " The tv@nywhere WDM Driver Installation Failed ".  Is it the card or what ?  Sent an email to MSI = no answer.  Do I have to return it and buy a better card (not from MSI)....Tried in 4 different computers....HELP ME SOMEONE !!!

    I tried it on a P4 3.2 ghz, ATI Radeon 9600 128 megs, Gigabyte Motherboard (don't remember wich one), over 256 megs DDR, 160 gigs hdd.  The second one was a Athlon XP 2200+, Ati Radeon 9250 128 megs, Gigabyte Motherboard GA-7VKMP, 80 gigs hdd, 512 megs DDR.  The third one is a P3 866, Ati rage Pro, Intel motherboard, 384 megs SDram, 40 gigs hdd.  They're all new installed win xp pro SP2 computers (after updates everywhere ex:graphic cards, windows etc...)  Really confused !!!  Tried in different PCI slots.  Do you think it's a card or chips (physically) problem, at your advice ?  I'm not at my first computer installation, and it's the first time I see this problem.  I'm in computers since 6 years and never seen that before.  Help me please...........

  • Qosmio F20-141 - Cannot start Win XP PRO SP2 installation.

    Cannot start Win XP PRO SP2 installation.
    After choose "start from CD" i can see for a little time only starting message ~"Starting Wisdows XP installation" (little white letters on top of black screen)
    After this computer hungs in black screen.
    QOSMIO F20-141 for Russian Federation
    M/N: PQF20E-02801YRU

    Hi again
    You should try to start the OS installation with Recovery CD and/or with the Windows XP CD. If this both procedures doesnt work so I assume there is something wrong with the hardware. Maybe a faulty HDD. In this case the best way to solve this issue is to contact the ASP

  • I am using iphone 4 (MC603B, version 4.3(8F190) and never updated it. as i have formated my laptop; i have to download itunes again. please help me to download itunes which suits this version. where can i get the link. thank you.

    I am using iPhone 4 (MC603B, version 4.3(8F190) and never updated it. as i have formatted my laptop; i have to download iTunes again. please help me to download iTunes which suits this version. where can i get the link. thank you.

    Older iTunes versions can be downloaded here: Apple - Support - Downloads
    Follow these steps to get your data to your new computer:
    Syncing to a "New" Computer or replacin…

  • Satellite Pro A10: No sound after upgrade to Win XP Home SP2

    Hi,
    Just used the recovery discs on my Sat Pro A10, no problem with sound, and then upgraded XP Home to SP2, no sound.
    From what I have read elsewhere, this is a problem, and there doesn't appear to be an answer. I have spent hours searching for updated drivers to no avail.
    I have also contacted Toshiba support, after much huffing, and puffing they pointed me to the following driver, 5.12.01.3542, which is the same as the one I already installed, and does not work.
    Surely there must be something out there that works.
    Ant.

    Install the newest available sound driver fro this sound chip and perform the all the Windows updates available on the Microsoft page!
    Update simply the whole OS!!!
    http://www.update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us
    Note; possibly you have to reboot the notebook and have to connect to this site several times to get all the available patches.

  • Laptop not turning on at all. PLEASE HELP

    Hello, last night i was on my laptop and it was working fine. I turned it off then in the morning i noticed the the hp logo on the back was on but the computer was off so I disconnected the battery then reconnected it and pressed the power button then nothing happened. When i tried to hard reset it without the battery I noticed that when I plugged in the power cord into the computer i noticed the charging light flashed then turned off but when I unplugged it the charging light glowed then died (when i did this with the battery in no lights turned on). When every I try to turn it on with or without the battery nothing happened; no lights, no sounds, no nothing.
    Please help. Thank you in advance.

    Did you try a different charger to see if it isn't a charger problem?
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Okay so I have a new ipod touch...but I need to get music out of my old nano to my itues w/out wiping out my old nano...how do i do this? new laptop so itues is new...please help

    okay so I have a new ipod touch...but I need to get music out of my old nano to my itues w/out wiping out my old nano...how do i do this? new laptop so itues is new...please help

    You need to authorize your new computer in iTunes with the same account that is synced to your nano (and old iTunes)
    In the menu bar click Store >> Authorize This Computer…
    This will allow your purchased music to be re-downloaded from iTunes and played on your new computer.
    If you did not purchase the music through iTunes, you may need a third-party program to get the music off the nano. However, It is much easier (by far) to move your old library from your old computer to the new one if you still have access to the old files. iTunes will not transfer music from your nano to the computer. It is a one-way sync.
    If you still have access to your old files, search google for how to transfer an itunes library, and follow someones instructions. It's not too complicated. You may want to specify mac to pc, pc to mac, mac to mac, or pc to pc, as the instructions will change.

  • Compaq CQ56 154 laptop windows 7 recovery process fails. PLEASE HELP

    Compaq CQ56 laptop windows 7 recovery process fails because RM component runtime and no valid RP index. PLEASE HELP
    I have tried the recovery process on this laptop over 10 times now and with multiple new hdds and it seems like it comes to a fail at the very end.I have posted the error log that I get. Please help me out in regards to this. 
    The process completes unit and at the very end the error log gives this:
    Error encountered during RM component run time            
    Please contact RM team for investigation            
                        CopyRight @   SRD.cpp :   12                      CopyRight @   SRD.cpp :   13 SRD 1.1.0.0115 System Recovery Deployment, provided by CyberLink. (cNB)       
                        CopyRight @    SRD.cpp :  14           DeployRp:etSRDMode @ DeployRp.cpp : 3571 SetSRDMode 1          
                            wmain @    SRD.cpp :  73 Executing call 'L"drp.SetConfigIni('deployrp.ini')"'        
            DeployRp:etectMedia @ DeployRp.cpp :  371 Start to detect disks ...         
                  DeployRp:etUp @ DeployRp.cpp :  630 Get User Partition drive letter : c.        
            DeployRp:etectMedia @ DeployRp.cpp :  563 Disk Index : [HDD] 0, [N/A] -1         
          DeployRp:etTargetDisk @ DeployRp.cpp :  571 Start to load ini ...          
                  DeployRp:etUp @ DeployRp.cpp :  630 Get User Partition drive letter : c.        
                 DeployRp:etBp @ DeployRp.cpp :  643 Start to find Build Partition drive letter.        
                  DeployRp:etBp @ DeployRp.cpp :  650 Build Partition drive letter : c.         
          BuildConfig::LoadConfig @ BuildConfig.cpp :   28 Loading C:\RM\Tools\DeployRP\build.ini ...        
          BuildConfig::LoadConfig @ BuildConfig.cpp :  111 C:\RM\Tools\DeployRP\build.ini loading complete.       
                            wmain @    SRD.cpp :  83 Executing call 'L"drp.LoadBuildIni()"'         
           DeployRp::CheckRpExist @ DeployRp.cpp :  713 Start to check whether Rp exists.        
           DeployRp::CheckRpExist @ DeployRp.cpp :  750 Recovery Partition doesn't exist.        
    DeployRp::CheckSystemRecoveryDoneFlag @ DeployRp.cpp : 757 Start to check whether SystemRecoveryDone.flg exists.     
    DeployRp::CheckSystemRecoveryDoneFlag @ DeployRp.cpp : 794 SystemRecoveryDone.flg doesn't exist.      
           DeployRp::InstallMSXML @ DeployRp.cpp : 1248 Start to install MSXML6.dll         
           DeployRp::InstallMSXML @ DeployRp.cpp : 1292 Install MSXML6.DLL complete.        
          DeployRp::CreateLangIni @ DeployRp.cpp :  331 Create Lang.ini command: C:\RM\Tools\DeployRP\CreateLangIni.exe c     
         DeployRp::CheckSSRDFlags @ DeployRp.cpp : 1044 Start to check if SSRD flags exist        
         DeployRp::CheckSSRDFlags @ DeployRp.cpp : 1061 SSRD flags do not exist         
         DeployRp::CheckSSRDFlags @ DeployRp.cpp : 1063 Check if SSRD flags exist complete        
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1363 Creating BootRM.wim ...         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1374 Start to do setting.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1377 SetWimImageDstPath.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1382 Check tool existence.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1385 Tool Path: c:\RM\Tools\opktools\dism.exe       
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1389 Dism.exe exists.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1392 SetWimMountPath.         
        CWimMgr:etWimMountPath @ WimMgr.cpp :  199 Wim File Mounting Path = C:\RM\Tools\DeployRP\mount\      
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1397 SetLanguagePacksPath.         
       DeployRp::CreateBootRMWim @ DeployRp.cpp : 1402 SetToolsPath.          
            CWimMgr:etToolsPath @ WimMgr.cpp :  213 [SetToolsPath] lpszToolsPath = c:\RM\Tools\opktools\      
          CWimMgr:etToolsPath @ WimMgr.cpp :  220 [SetToolsPath] m_szDISMExeFullPath = c:\RM\Tools\opktools\dism.exe     
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1406 Setting complete.         
       DeployRp::CreateBootRMWim @ DeployRp.cpp : 1411 Start to do Initialization.         
             CWimMgr::InitWimMgr @ WimMgr.cpp :  358 Windows PE Source Path = c:\RM\RP\sources\boot.wim      
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1420 Initialization complete.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1423 Start to mount WIM image.        
           CWimMgr::MountWimImage @ WimMgr.cpp :  437 Temp Working Path = C:\RM\Tools\DeployRP\temp\      
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1426 Mount WIM image complete.        
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1431 Start to setup language packs...        
       DeployRp::GetSupportedLang @ DeployRp.cpp : 1639 Lang.ini path: c:\RM\Tools\DeployRp\lang.ini       
       DeployRp::GetSupportedLang @ DeployRp.cpp : 1678 Supported Languages :           
        CWimMgr:etWinPELanguage @ WimMgr.cpp : 1134 CWimMgr:etWinPELanguage - Enter       
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1437 Setup language packs complete.        
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1443 Start to setup tool's language packages...       
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-setup.cab   
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-Scripting.cab   
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-SRT.cab   
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-WMI.cab   
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-wds-tools.cab   
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1450 Setup tool's language packages complete.       
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1452 Start to un-mount WIM image...        
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1455 Un-mount WIM Image complete.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1696 Start to estimate recovery partition size ...       
            DeployRp::CalculateRp @ DeployRp.cpp : 1709 base.wim.wim size : 12452203405 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1725 install.log file size : 623780 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1735 WinRE and WinPe files size : 281055618 bytes.       
            DeployRp::CalculateRp @ DeployRp.cpp : 1740 RM Software size : 63933517 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1745 BootRM.wim size : 268793098 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1750 Patch Folder size : 369308088 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1755 File4Rp Folder size : 0 bytes.         
            DeployRp::CalculateRp @ DeployRp.cpp : 1761 Extra space : 2371154178 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1766 Prevented Extra size : 0 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1776 Recovery Partition estimated size : 15807695464 bytes.      
            DeployRp::CalculateRp @ DeployRp.cpp : 1777 Recovery partition estimation complete.        
               DeployRp::CreateRp @ DeployRp.cpp : 2072 Start to create recovery partition ...        
                    DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 0. PartitionNumber: 0. PartitionStartAddr: 0 bytes. PartitionLength: 0 bytes  
                    DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 12. PartitionNumber: 3. PartitionStartAddr: 79917219840 bytes. PartitionLength: 108093440 bytes
                    DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 7. PartitionNumber: 2. PartitionStartAddr: 209715200 bytes. PartitionLength: 73013395456 bytes
                    DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 7. PartitionNumber: 1. PartitionStartAddr: 1048576 bytes. PartitionLength: 208666624 bytes
                    DetToolRpInfo @ DeployRp.cpp :  156 Can't find valid Rp index.         
               DeployRp::CreateRp @ DeployRp.cpp : 2090 Invalid Rp index          
                            wmain @    SRD.cpp :  93 Executing call 'L"drp.Deploy()"'         
                            wmain @    SRD.cpp :  38 Output            
    ERROR: call L"drp.Deploy()" failed.             
                           wmain @    SRD.cpp :  38 Output - Returned HRESULT = 0xe0ef002f    

    Hello k877
    I am sorry to hear you are having issues reinstalling your operating system. I am providing you with a link here to a document titled Recovery Disk Creation Error Codes (Windows 7). Now document is for creating the recovery disks but the error is showing up in your error log (0xe0ef002f). The error according to the document is the File/directory does not exist. It looks like a function call Deploy() is attempting to access this File/directory and is unable to.
    This leads me to think that it is the disks that you are using. It would stand to reason anyways as you state you have tried this on multiple hard drives. A good test would be to check to see if your error in the error log is the same every time. If it is happening at the same point each time then simply order a new set of discs from here.
    I hope this resolves your installation issue. Thank you for posting your question on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HT4352 I cannot get any sound on my iPad when home sharing, yet do have sound when playing iTunes that I have loaded, please help?

    I cannot get any sound on my iPad when using the remote app for home sharing, yet do have sound when I play iTunes that I have loaded on my iPad, please help?

    You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • Can't get sound working on my Pavilion DV7-1245dx! Please Help!

    To start, I do have (fail) Vista,
    For a while now, my touch buttons for the volume on my laptop have stopped working and the mute button is stuck on (ie. it is constantly lit up) and I get no sound. I click the unmute button from the volume control and still no sound. I've tried to uninstall the one sound driver and reinstall it but the sound driver/ ( or whatever) was no longer there after I rebooted the computer and attempted to reinstall. Before I uninstalled the one sound driver I had 3 different devices in the sound portion of the device manager. Now I only have 2, which are: (1) High Definition Audio Device and (2) IDT High Definition Audio CODEC. I have tried to "ADD Legacy Hardware" from the Device Manager in hopes to reinstall the missing device I need but every IDT sound option I tried to install resulted in "My computer was denied the install" or something lame like that.
    Can anyone (or possibly a HP support whom I don't have to pay because I am out of warranty) could help me solve this problem?
    Thank you very much.

    Try reinstalling the Microsoft UAA Driver.
    http://www.techspot.com/drivers/driver/file/information/9662/
    ________________________________________________________________________________________________________ I Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly

  • Reinstall of Win XP Pro on T42 help = Device and Driver Issue

    Hi All, need help. Recently I re-installed Win XPro on a T42 Type 2373 ThinkPad. Prior to doing a re-installed all devices were working(just 3 days ago). Wireless and Ethernet. After a clean installed the systems does not see ethernet or wireless device. I checked Device Manager and I get the famous "? Other Devices" for Ethernet Controller. I have installed all the driver listed on
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?sitestyle=lenovo&lndocid=MIGR-55386
     Still systems does not recognize device. Devices are ENABLED in the BIOS. Device Manager does not show Wireless device and Ethernet.  I was able to install video, sound, & modem. So here I am stuck unable to connect to internet via LAN or Wireless. I am lost for words. Any help would be greatly appreciated.
    Thanks

    Solved: after downloading the driver I actually had to go to the location of the file and click on the SetUp and it worked.
    After downloading and opening the exe file i assumed (and we know what that does) that was all i needed to do. It seems that also have to then open the folder that this file unpacked to and click on the setup file (which i didn't realise was there). 
    http://forum.thinkpads.com/viewtopic.php?t=66278

Maybe you are looking for