Prob. re-registering satellite server

Hi all: having a bit of an issue with a satellite server. I decided to completely remove all roles from one of our sat servers, un-register it, remove the agent, and reinstall. This all proceeded fine but I am not able to register the server into the zone. The command zac reg -k key https://serverort returns an error:
Unable to register with server https://-------
Service Error. code: -28, message: Internal Datamodel exception with trying to create/update device: XXXX
xxxxx
xxxxx
You are not logged in.
Any suggestions? Thanks, Chris.

All fixed. For some reason, after about 2 hours I was able to register them.
>>> Chris<cmosentine@N0_5pam.vrapc.com> 2/1/2011 8:32 AM >>>
Hi all: having a bit of an issue with a satellite server. I decided to completely remove all roles from one of our sat servers, un-register it, remove the agent, and reinstall. This all proceeded fine but I am not able to register the server into the zone. The command zac reg -k key https://serverort returns an error:
Unable to register with server https://-------
Service Error. code: -28, message: Internal Datamodel exception with trying to create/update device: XXXX
xxxxx
xxxxx
You are not logged in.
Any suggestions? Thanks, Chris.

Similar Messages

[Bug?] DSC - Registering for Server Events

[LV2009, Win 7 Pro]
Howdy (Ben S another one for you? )
I am trying to register for alarm events.
This works fine by using the Register for Shared Variable Events method.
Since I have a lot of SVs and a dedicated server, I thought listen to the server would be much easier to implement.
The LabVIEW Help implies that using the Request System Event Notifications.vi will do the trick:
However, I can't seem to Register for Server Events - it doesn't work.
The code seems quite simple (below) - I just want to listen to all SVs on the localhost (default).
All the Events are coming through to the DSC (viewed in MAX), however, using the Server method I don't get any notifications through the Event Structure.
Am I doing something wrong? - Or is this a bug?
Is there somewhere I need to configure stuff?
Or does it just not send me Alarm and Notification Events of Shared Variables?
What does it send me then?
I couldn't even get the Example in NI Example Finder to work (labview\examples\lvdsc\Event Structure Support).
It shows the SV Registered Event but not the Server/System Event.
Attached is a simple project I used to demonstrate this - a SV configured for a HiHi Alarm:
The work around is to list out all Shared Variables and just read that from disk and load it into the application etc...
However, it is much more desirable to subscribe to the server and get all SV Events - is this possible?
Cheers
-JG
Certified LabVIEW Architect * LabVIEW Champion
Attachments:
DSC Server Events [LV2009].zip ‏20 KB

Ravens Fan wrote:
I think if you put in the fully qualified name for the network path and process and library on the other machine, you should be able to get the list.
You'll have to try it and find out.
Cheers for posting
From the help - I didn't think this was possible?
I gave it a go using the following naming
But I get the following error (I tried to connect to multiple SVE across our network and got the same error).
I can use though and it returns the local SV List, so I think I have the naming correct?
<edit>
My other thought is to build a hook in to the app and invoke this across the network using VI Server, so that it can run the VI on the localhost then report back the SV List).
</edit>
Certified LabVIEW Architect * LabVIEW Champion

Install hanging when registering automation server

I'm tearing my hair out, as well as getting my 4rse kicked by the other half!
We've had iTunes up and running on our Vista Home Premium box for a while, then it just stopped working coming up with an error.
So I've tried re-installing, but 7.3 keeps hanging when trying to register the automation server. Worst still I have to kill it with Task Manager and it leaves a partial install that refuses to uninstall!
Any guidance would be much appreciated.
Thanks,
Stuart

Registering Automation Server hangs are actually a 7.x.x.x thing rather than a 7.3.0.54 thing. I've seen them with 7.2.0.x too.
Perhaps try this strategy.
First download and then install the QuickTime standalone installer:
Latest Quicktime Installers … get the one that doesn’t mention iTunes
If that install goes through properly, then try another iTunes install.
(The theory here is that if your QuickTime is already up to date, the iTunes installer bundle skips the QuickTime part of the install. If the iTunes installer is given less to do, sometimes it gets past the Registering Automation Server hang.)

Satellite server time was set in the future

According to status in ZCM, workstation time was set in the future (Last Full Refresh: 2/13/11).
The time is now correct.
Workstation in question is also a satellite server.
"Last Full Refresh" is stuck at some point in time on all workstations "closest" to server, new content (bundle) wasn't delivered since.
What is the best course of action?
How can one get rid of the wrong time stamps ?

ZGajsak,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

How to register Essbase server with Shared Services?

Hello All,
How to register Essbase server with Shared Services?

Hello All,
How to register Essbase server with Shared Services?

Unable to Delete a Satellite Server

I have a satellite server (server class machine)11.1.x . That i want to get ride off. I removed it as a satellite server and it is no longer showing as a Satellite in the Server Hierarchy. I Ithen try to delete the server, I get unable to delete the object error in ZCC when I try
Tried using zman sd /devicepath but am getting the device has associations or dependencies. Delete those first.
I cannot see any kind of dependencies or association anywhere. I have looked at at the Locations made sure it is not in any. There are no policies or bundles associated with the device.
Any suggestions?
Paul Lamontagne
Lamtech Consulting Inc.

Originally Posted by Paul Lamontagne
The device was on and was comminication as I see the last contact time.
I tried to removed the ZAA and it did a local uninstall only....
So now it no longer communicates to the zone, and i cannot delete it out of
ZCC and i tried to install the 11.2.4 agent and now get a missing libxxx.so
file
This is in a lab as well, but I hate not being able to "clean it up before I
install 11.3.1..
Paul
>>> On 08/09/2014 at 7:18 AM, in message
<NfgPv.6120$[email protected] m>, nop1983<[email protected]>
wrote:
> PaulLamontagne wrote:
>
>>
>> I have a satellite server (server class machine)11.1.x . That i want
>> to get ride off. I removed it as a satellite server and it is no
>> longer showing as a Satellite in the Server Hierarchy. I Ithen try to
>> delete the server, I get unable to delete the object error in ZCC
>> when I try
>>
>> Tried using zman sd /devicepath but am getting the device has
>> associations or dependencies. Delete those first.
>>
>> I cannot see any kind of dependencies or association anywhere. I have
>>
I could've sworn someone else ran into something similar with this, but I don't recall what the solution (if any) was.
I thought that for a satellite server that it was acceptable to delete it if you could only do a removal only
Maybe you can reinstall the agent on the machine and then see if it'll reconnect and let you demote it?

Satellite Server Issue

Not sure if this is the correct forum, if incorrect my apologies,
Good day,
Another ZCM related issue has cropped up, this time with a Satellite server, that is going to be performing the Imaging Role, I have included screen captures of the Satellite server, along with another server that is working, basically the Sxx-Oxx1 server is showing that the imaging role is enabled using the zac satcfg, however; when running the zac satr it reports that the Imaging Role: Enabled: false Status : Stopped (further when trying to restart the service it fails almost instantly)
Any thoughts as to why this service might be failing or what troubleshooting steps I can try next? This is 11.2.4 MU 1, and so far this has been the only site that has been reporting this issue. The installation of the agent and configuration is standard across other Satellite servers, so strange that this one would exhibit this behavior.
We did a quick Google search and found TID 7008789 and it mentions a timeout of 120ms, this site in question does have a slow link, but when we change other services those changes are seen almost immediately,
Any thoughts?
Thank you,
-Dan

dschaldenovell,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

An error when registering SQL server driver

Hi
I have got the following error when register SQL server drive
"RemoteMsDataBase.java": Error #: 302 : cannot access class com.microsoft.jdbc.sqlserver.SQLServerDriver; neither class nor source found for com.microsoft.jdbc.sqlserver.SQLServerDriver at line 19, column 63
the code that cause error
// register the SQL driver
DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());
// connect to the DB by using the driver.
String connString = "my_dbserver:1433;databasename=my_database";
String strDBConnect = "jdbc:microsoft:sqlserver://" + connString;
conn = DriverManager.getConnection(strDBConnect, userName, passwd);
To include jars to my classpath do this:
javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.java

javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.javaSpecify the full path for jar(s), example,
javac -deprecation -classpath .;c:\myjars\msbase.jar;c:\myjars\msutil.jar;c:\myjars\mssqlserver.jar *.java
Hope it works.
Sudha

HT4623 iPhone 4s will not register with server after iOS 6 update

My iPhone 4s will not register with server after iOS 6 update. Does anyone has similar problem?

Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG

WebCenter Satellite Server installation failing

Hi all.
Anyone experience issues with WebCenter Sites Satellite Server 11.1.1.6.1 bp1 installer? ssInstall.sh
In the step where configuring which application server is (Websphere, WebLogic or Tomcat) the combo appears empty and the install_log is getting an ArrayIndexOutOfBounds:
[2013-03-04 11:39:16.873][CS.INSTALL][ERROR] ftJDialog.actionPerformed: Exception caught:
java.lang.ArrayIndexOutOfBoundsException
        at java.util.Vector.elementAt(Vector.java:430)
        at COM.FutureTense.Apps.Install.ftJDialog$ftJDialogComboBox.setToHash(ftJDialog.java:2070)
        at COM.FutureTense.Apps.Install.ftJDialog.setToHash(ftJDialog.java:1199)
        at COM.FutureTense.Apps.Install.ftJDialog.actionPerformed(ftJDialog.java:1573)
        at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
        at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
        at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
        at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
        at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
        at java.awt.Component.processMouseEvent(Component.java:6297)
        at javax.swing.JComponent.processMouseEvent(JComponent.java:3275)
        at java.awt.Component.processEvent(Component.java:6062)
        at java.awt.Container.processEvent(Container.java:2039)
        at java.awt.Component.dispatchEventImpl(Component.java:4660)
        at java.awt.Container.dispatchEventImpl(Container.java:2097)
        at java.awt.Component.dispatchEvent(Component.java:4488)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
        at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4236)
        at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4166)
        at java.awt.Container.dispatchEventImpl(Container.java:2083)
        at java.awt.Window.dispatchEventImpl(Window.java:2489)
        at java.awt.Component.dispatchEvent(Component.java:4488)
        at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:668)
        at java.awt.EventQueue.access$400(EventQueue.java:81)
        at java.awt.EventQueue$2.run(EventQueue.java:627)
        at java.awt.EventQueue$2.run(EventQueue.java:625)
        at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
        at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
        at java.awt.EventQueue$3.run(EventQueue.java:641)
        at java.awt.EventQueue$3.run(EventQueue.java:639)
        at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:638)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
        at java.awt.Dialog$1.run(Dialog.java:1044)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:666)
        at java.awt.EventQueue.access$400(EventQueue.java:81)
        at java.awt.EventQueue$2.run(EventQueue.java:627)
        at java.awt.EventQueue$2.run(EventQueue.java:625)How can I fix this issue to continue with the wizard installer?.
I will verify SatelliteServer.xml file (inside it are the combo values).
Regards.

Changing JDK used to launch installer solved the problem :).

Register essbase server to shared service in Unix

Hi All,
How can we Register essbase server to shared service in Unix server. Can anyone please let me know the procedure or steps.
Thanks

Do you mean convert essbase to shared services security as you should of registered essbase with shared services when you configured essbase.
You can convert essbase to shared services security via EAS, right click security.
Cheers
John
http://john-goodwin.blogspot.com/

Satellite Server. Role is enabled but status is stopped

I have a satellite server (SLES 11.3) that has two roles assigned: imaging and content. Imaging is working fine, but when I run zac satr, it reports:
Role: Content Enabled: true. Status: Stopped.
I've tried removing that role and then readding it, but get the same result. Is there a way I can force it to try to start so I can check the logs (zmd-messages? is that the right log to be checking?) and see where it's failing? Are there rpms that I can reinstall that might correct it?
The one complication with this machine is that it used to be a primary server. I went through the primary server uninstall process and then set it up as a satellite. Everything was working fine, but now I'm running into this problem.
I appreciate any thoughts the community might have on this problem.

chndrcks,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Zac commands on linux satellite server

Since I'm dumb, where does one go about running the zac commands on the linux satellite server?
The docs just say to run zac cdi ss and whatnot and I can't find it in the docs (ie, you have to go to like /opt/novell/something)

Nevermind, found them on the scenarios on page 5 of 8 (AFTER they have you run the commands on page 2).
I'll see if this can be added to the actual documentation as I still don't see it in the docs anywhere.

403 error when registering proxy server (non-central AE)

Hi all.
I'm getting 403 error when trying to register proxy server in my local non-central Adapter Engine. When listing the ProxyServer servlet available commands (http://host:port/ProxyServer/), it says that "xi_jpr_register_bindings" security role is required, but my local UME has not that role.
Thanks,
Gari.

Thanks a lot Prateek.
Your reply was very helpful because it works now. One of the configuration steps in the page says to use the Security Provider service of the Visual Administrator to verify that some security roles are assigned to the appropriate user groups. The Scurity Roles section (inside Security Provider service) in my Visual Administrator does not show the roles and groups directly. I had to navigate to ProxyServer and MessagingSystem components so that the roles and groups where visible to me and assign them to my user.
Should I see them into Security Roles section directly? The roles and groups are not visible from User Management Section.
Thanks again.
Gari.

Satellite Server traffic v Primary Server traffic

I recently did a packet trace on a workstation and noticed a lot of traffice going to the primary servers and not just the satellite server.
I have a 10.3.3 environment with Windows 2003 servers and Full SQL 2005. A Windows XP workstation as a satellite server. That satellite server has Content, Authentication and Collection configures. It also has a Closest Server Rule set to a CIDR /16 IP address.
I am not sure why, but the workstation seems to hit the primary server first and even another primary server second. Then during login it does seem to hit the satellite server a bit but it hits the primary server just as much and like I said earlier it seems to hit another primary server that isn't configured for that site. I do have content on all Primary servers so I understand it hitting these servers some, but during authentication and during content retrieval I am confused at why it wouldn't be smacking the satellite server to no end and not the primary servers.
I need to make sure I have satellite servers and primary server configured correctly due to connection issues. Please, any help on configuration would be appreciated. Thanks.

melnikok,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Prob. re-registering satellite server

Similar Messages

Maybe you are looking for