Prob with creation of shipment due to the nonavailability of route in deliv

Hi friends,
I have an issue as following.
this is the document flow.
Purchase order 4500297393                     04.06.08
Replen.Cross-company 80525695             30.09.08 Completed
WMS transfer order 2543                         30.09.08 Completed
Confirmation of service                             02.10.08 Completed
TF to cross company 4902209803            02.10.08 complete
Intercompany Billing 90604295                 03.10.08 Completed
Accounting document 90604295               03.10.08 Not cleared
GR goods receipt 5000597061                  08.11.08 Completed
the problem is i want to create a shipment(VT01N) with this delivery document.
this del doc dont have a route.
I want to enter the route in delivery doc to create shipment
advise me what to do.
harini

Hello,
As the delievery is completed, and goods receipt has happenend against the delivery, you will not be able to change the route now. I think the shipment can be done before PGI.
Now you need to reverse the G/R using MBST, reverse the PGI using VL09, delete the delivery using VL02N and create new delivery from PO once the route has been setup.
Prase

Similar Messages

Generated Client ID is invalid due to the HTML 4.01 spec

Hi!
I have a simple JSF page, with a h:form component without any attributes. The generated code for the component is as follows:
<form id="_id8" method="post" action= ...>
</form>The problem is that, starting the id with '_' is invalid due to the HTML 4.01 spec (http://www.w3.org/TR/html401/types.html#type-name).
It is ok for a component ID, but it is invalid for a client id. The renderer should have taken care about this, shouldn't it?
Regards,
Norbert Cs�k

Hi!
you can gice a id to your form and it should work.:
<h:form id='myForm'>Yes, it's a good workaround. But the main problem is: the generated web page using the RI is not a valid HTML.
Why? Is it a bug?
Norbert Cs�k

Strange prob with calander

I m facing really strange prob with calendar --- it is showing all the days of the March 1st to 31st correct but on the top in place of month it is showing February 2008 instead of March 2008. How can Feb has 31 days. I hv checked all the other settings.
This is happening in every month i.e it is showing the previous months name.
PLS HELP.

The standard troubleshooting procedures for the phone are to power the phone off/on. If that doesn't correct the issue, then do a reset. This is accomplished by holding down the home buttong and the sleep/wake button until you see the Apple logo, then release the buttons. Ignore the slide to turn off message. If that does not correct the issue, then connect to iTunes and restore the phone.
Hope these help you.

How does QoS work with WAAS WCCP? What's the interaction between QoS Traffic Classification and WAE Traffic Application Policy?

How does QoS work with WAAS WCCP? What's the interaction between Router QoS Traffic Classification and WAE Traffic Application Policy?

By default, WAAS preserves the DSCP marking on intercepted packets. There is a configuration option to set/override the DSCP value at the global (device), application, and classifier levels. Currently WAAS provides marking only. There is no action taken by WAAS based on the DSCP value.
Regards,
Zach

Probs with online gaming due to subnet or IP addresses

When I first hooked up my router I had probs with Network Magic connections.
Now that I have it running better... I seem to be having a problem when gaming
online.
My boyfriend and I have hooked up our pc's together and have tried gaming online
together... and it worked for a couple of days. But with having some D-Link router
probs... we reconnected everything.
Now I recall seeing two different subnet numbers for each of us before we redid
the D-Link... now they are the same...
So I am wondering if this problem is router related or does it lie with Network
Magic? All I know is... that when I try to get on a multiplayer gaming server
I get kicked by Punkbuster saying: 'PB GUID AUTH: UNKNOWN'.
I think our online gaming predictament is due to my boyfriend and my subnet
numbers now being the same. (unlike before).
(If my prob does not relate to my router and Network Magic... than I thought
of putting in a Punkbuster Ticket to evenbalance.com)
Any help/suggestions would be greatly appreciated. : )
Note: my firewall is configed to allow online gaming, so I know that's not the
prob.

LJuliet wrote:
When I first hooked up my router I had probs with Network Magic connections.
Now that I have it running better... I seem to be having a problem when gaming
online.
My boyfriend and I have hooked up our pc's together and have tried gaming online
together... and it worked for a couple of days. But with having some D-Link router
probs... we reconnected everything.
Now I recall seeing two different subnet numbers for each of us before we redid
the D-Link... now they are the same...
So I am wondering if this problem is router related or does it lie with Network
Magic? All I know is... that when I try to get on a multiplayer gaming server
I get kicked by Punkbuster saying: 'PB GUID AUTH: UNKNOWN'.
I think our online gaming predictament is due to my boyfriend and my subnet
numbers now being the same. (unlike before).
(If my prob does not relate to my router and Network Magic... than I thought
of putting in a Punkbuster Ticket to evenbalance.com)
Any help/suggestions would be greatly appreciated. : )
Note: my firewall is configed to allow online gaming, so I know that's not the
prob.
Hi LJuliet ,
See this post: http://forums.linksysbycisco.com/linksys/board/message?board.id=Network_Magic&thread.id=18
Post back with additional details.
Also what do you mean by: My boyfriend and I have hooked up our pc's together?
Through the D-Link Router?
Please include information on Spyware protection on your computer.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I d

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>

I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out". No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem." Tried suggestions I've seen on the forum.

Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem." I've tried various suggestions I've seen on the forum but nothing has worked. TIme Machine worked fine for the last two years and just suddenly started having this problem every time. The only thing that was a little different is that the computer was off for a week while on vacation and then I added a large amount (20 GB) of photos. Now the requested backup size is 82GB, which is large, and process proceeds very slowly for 2-3 hours before failing with the message mentioned. I have more than enough available backup storage space for it. Before failing, Time Machine has backed up no more than 12GB or so of the backup. It fails during different files each time.
I've turned off the computer sleep feature, and I've checked that the NAS is set to never automatically power down. I normally backup over Wi-Fi, but I've also tried connecting to Ethernet and it still has the same problem. It's odd because I also have a MacBook Pro that is still backing up fine to the same NAS using the MacBook's Time Machine.
I am using an iMac with OS X 10.6.8 and an Iomega StorCenter ix2-200 NAS.
I have system logs that I can share if helpful. The logged messages vary a bit from run to run, but here are some messages that I've been seeing:
I always get this message near the beginning of the backup:
Event store UUIDs don't match for volume: Macintosh HD
I've gotten this messsage a number of times:
Bulk setting Spotlight attributes failed.
One Day
Stopping backupd to allow ejection of backup destination disk!
Another day
1/7/12 10:44:20 AM
mDNSResponder[18]
PenaltyTimeForServer: PenaltyTime negative -112916, (server penaltyTime -1132397006, timenow -1132284090) resetting the penalty
1/7/12 10:46:37 AM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x1106be94
1/7/12 10:46:37 AM
kernel
AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
Another Day
1/6/12 8:03:22 AM
Google Chrome[164]
Cannot find function pointer CMPluginInFactory for factory 3487BB5A-3E66-11D5-A64E-003065B300BC in CFBundle/CFPlugIn 0x16f99e20 </Users/smarmer/Library/Contextual Menu Items/Google Notifier Quick Add CM Plugin.plugin> (not loaded)
1/6/12 8:04:02 AM
com.apple.backupd[193]
Copied 7.5 GB of 67.0 GB, 8866 of 8866 items
1/6/12 8:06:58 AM
/System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[1013]
No valid tickets, timing out
1/6/12 8:29:44 AM
mDNSResponder[19]
PenaltyTimeForServer: PenaltyTime negative -148702, (server penaltyTime 2056822773, timenow 2056971475) resetting the penalty
1/6/12 8:59:22 AM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa5ac380
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
Another day
1/5/12 3:48:55 PM
mdworker[2128]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
1/5/12 4:24:54 PM
mDNSResponder[19]
PenaltyTimeForServer: PenaltyTime negative -42698, (server penaltyTime 1148718961, timenow 1148761659) resetting the penalty
1/5/12 4:29:58 PM
com.apple.backupd[2074]
Copied 586.4 MB of 67.0 GB, 9891 of 9891 items
1/5/12 4:39:00 PM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa1c0380

bokon0n wrote:
1/11/12 8:53:30 AM
com.apple.backupd[1169]
Warning: Destination /Volumes/TimeMachine does not support TM Lock Stealing
1/11/12 8:53:30 AM
com.apple.backupd[1169]
Warning: Destination /Volumes/TimeMachine does not support Server Reply Cache
Those indicate that your NAS is not fully compatible with Snow Leopard.
1/11/12 8:53:35 AM
kernel
jnl: disk2s2: replay_journal: from: 67182592 to: 78680064 (joffset 0xa7b8000)
1/11/12 8:53:39 AM
kernel
jnl: disk2s2: examining extra transactions starting @ 78680064 / 0x4b09000
1/11/12 8:53:39 AM
kernel
jnl: disk2s2: Extra txn replay stopped @ 79056896 / 0x4b65000
1/11/12 8:53:49 AM
kernel
jnl: disk2s2: journal replay done.
1/11/12 8:53:49 AM
fseventsd[41]
event logs in /Volumes/Time Machine/.fseventsd out of sync with volume. destroying old logs. (253512 14 253512)
1/11/12 8:53:50 AM
kernel
hfs: Removed 1 orphaned / unlinked files and 0 directories
That looks like a problem was found with the file system (data) on the TM disk. I don't know the details, but OSX tried to recover it from the journal, and found extra data on the drive. Likely a result of the incompatibility mentioned above.
1/11/12 9:47:40 AM
com.apple.backupd[1169]
Bulk setting Spotlight attributes failed.
That's a problem writing to the NAS drive.
But the backup continued after all this.
1/11/12 1:25:07 PM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x9d00b44
Something caused a disconnect. Can't tell from the log what it was.
I doubt it's a problem with something in OSX being damaged or corrupted, but reinstalling OSX isn't a major hassle, so might be worth a try.
To be incompatible with Snow Leopard, this NAS must be at least a couple of years old. It may be beginning to fail.
Contact the maker. See if there's an update to make it compatible with Snow Leopard. If so, that might fix it.
If not, or if that doesn't fix it, see if they have any diagnostics that will shed any light.

IO assigned with Asset,but not coming at the time of PO creation

Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1     Depreciation - IFRS (INR)              1     0L
15     Income Tax Act                             0
20     Depreciation - Indian GAAP (INR)     3     1L
30     Depreciation - IFRS (USD)              0
31     Depreciation - Indian GAAP (USD)       0
In ACSET-Account assignment:
for dep area-20
CAUFN     Internal Order     *     Generic Trans. Type     02 Depreciation Run
KOSTL     Cost Center     *     Generic Trans. Type     02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regards

Hey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
     Message no. AA565
Diagnosis
     The asset to be posted does not manage parallel depreciation area 31, or
     transaction type that you are using is limited to certain depreciation
     areas, and does not contain depreciation area 31. This is incorrect.
System Response
     Posting is rejected.
Procedure
     Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards

At the creation of MCD we got the problem with Request

Hi All,
we are all very new to SAP MI,
At the creation of CD we got the problem with Request
Creation of CD
we gave these entries
1.Mobile Solution Name : CIBERNW
Version : 1001
Description : Ciber Netweaver Mobile
Cmponent Type : APPLICATION
Runtime Enviroment : JSP
In SyncBO tab we specified our SyncBO that is ZNWW_EX01
we selected the check two checkboxs that is
 ->SyncBOs Expect Initial Value
 ->Data Visible to all
2.when i am trying to save the MCD it will open one dialog box that is
"Object can only created in SAP Package " -> Continue
 "Link to Transport " it says
"Include MCD in Transport Request", "Yes","No"
when i will go for "Yes"
it will give one more dialog box that is
"prompt of workbeanch Request"
it will give one Request bydefault that is "CNWK900030"
there we have some option that is
 ->Continue
 ->Create Request
 ->Own Request
which one we will select ?
i will go for Continue it will open other dialog box it says
"Include MiniApp in Transport Request"
it says "MiniApp must be assigned to a transport request"
i will go for continue it will the message in the status bar
"MCD Changed"
can you please tell me this process is Right or wrong
if it is wrong can you please tell me the right process
and it will some default Requests which Request we need to select
or we need to create the Request where we need to create that
what is process we need to follow ?
Thanks and Regards
Dileep Painnamaneni

Hi Dileep,
<<Creation of MCD >>
<<we gave these entries >>
<<1.Mobile Solution Name : CIBERNW
Version : 1001
Description : Ciber Netweaver Mobile
Cmponent Type : APPLICATION
Runtime Enviroment : JSP>>
In SyncBO tab we specified our SyncBO that is ZNWW_EX01
we selected the check two checkboxs that is
->SyncBOs Expect Initial Value
->Data Visible to all
Every thing is fine. We need to check Link to SAP MI Home page check box
2.when i am trying to save the MCD it will open one dialog box that is
"Object can only created in SAP Package " -> Continue
"Link to Transport " it says
"Include MCD in Transport Request", "Yes","No"
when i will go for "Yes"
it will give one more dialog box that is
"prompt of workbeanch Request"
it will give one Request bydefault that is "CNWK900030"
there we have some option that is
->Continue
->Create Request
->Own Request
which one we will select ?
i will go for Continue it will open other dialog box it says
"Include MiniApp in Transport Request"
it says "MiniApp must be assigned to a transport request"
i will go for continue it will the message in the status bar
"MCD Changed"
In SAP when ever we create any object(tables or MCDs) :
there are two things CUSTOMER NAME SPACE(stored locally in that system only) and FORIEGN NAME SPACE(can be transported)
CUSTOMER NAME SPACE objects starts with 'Z' or 'Y'
FORIEGN NAME SPACE objects starts with any other digit other than 'Z' or 'Y'
So youhave created MCD name CIBERNW which starts with 'C' (its not customer name space with z or y)
so it will be stored in package(so that this package can be transported to any other system later)
So what ever you have done is correct.
You can create your own request also.
But confirm once that whether you are supposed to store your MCD this that package.

can you please tell me this process is Right or wrong
if it is wrong can you please tell me the right process
and it will some default Requests which Request we need to select
or we need to create the Request where we need to create that
what is process we need to follow ?
So this is the concept of request.
So this request is nothing but....
When ever we create tables or MCDs we try to save it..so if we are trying to create objects in Foreign name space(i.e without 'Z' or 'Y' inthe beginning) so it will ask to create this object in a package which requires request(transport request)
All objects are stored in package,( so this package contains many objects like MCD,SYNBOS etc what ever we store in it) so we can transport this package from one system to another system so to transport we need to generate a transport request for that package and them release that transport request.....
So once the package is released and we try to edit or create new objects in that package it will ask for some new request.....
Yes we can create our own request and later release it.
But in your case u can take up the default request and continue.
If this MCD is for only testing purpose(for our selfs)..means this MCD is just for our testing sake..its better to create it in Customer name space..starts with 'Z' or 'Y'.
I hope its clear.
Cheers,
Karthick

Importation ;I just started with lightroom 5,6 (french)-I 'd like to import with creation of a second copy apart of the catalog but impossible to activate this option.How should I do to activate this option?

Importation ;I just started with lightroom 5,6 (french)-I 'd like to import with creation of a second copy apart of the catalog but impossible to activate this option.How should I do to activate this option?

Importation ;I just started with lightroom 5,6 (french)-I 'd like to import with creation of a second copy apart of the catalog but impossible to activate this option.How should I do to activate this option?

I just brought 15-inch macbook pro with retina display for about 3 weeks, will there be any refund or upgrade to my macbook due to the discount and upgraded right now

I just brought 15-inch macbook pro with retina display for about 3 weeks, will there be any refund or upgrade to my macbook due to the discount and upgraded right now

https://discussions.apple.com/thread/4806203?tstart=0

My iphone 3gs says I need to restore my phone with itunes. when i connect the phone it says i need to unlock the phone which i cannont due because of the caution saying i need to restore. does anyone have any idea how to fix this problem

My iphone 3gs says I need to restore my phone with itunes. when i connect the phone it says i need to unlock the phone which i cannont due because of the caution on the phone. How do i fix this?

Hold down the power button and home button at the same time until the phone powers on, shuts back off, powers on again and continue to hold it until it shows the itunes logo to plug in to itunes. This should allow you to restore without unlocking it.

Recently while we were overseas, it was time to renew our Adobe Convertor. We did so but forgot that our card number had changed due to the Christmas problem with Target. So we were denied. Could webe reinstated?

Recently while we were overseas, it was time to renew our Adobe Convertor. We did so but forgot that our card number had changed due to the Christmas problem with Target. So we were denied. Could webe reinstated?

Could you provide the name of the service that you subscribed to? Adobe ExportPDF, PDF Pack, or anything else?
I can move this post to an appropriate forum so that you can get help.

Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob

Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob any fix/solution for it.. Helppppp!!!!!!!!!!!!!!!!!!!!!!!! As soon as possible, it will be gratefulness,
Thnksssssss....

So you are saying that you followed all of the steps in the support document for problems with connection, including removing and reinstalling iTunes? You do not say what you have tried, so it is hard to make recommendations. If this is the case, then you have tried resolving driver issues? What if you go to Device Manager and look for the iPhone. You should be able to click on it and see about drivers. You can update/reinstall the device driver.

Prob with creation of shipment due to the nonavailability of route in deliv

Similar Messages

Maybe you are looking for