Prob with fast forward

I only use the mini to listen to audiobooks. Sometimes it loses its place and when I try to fast forward or rewind it either goes all the way back to beginning or 1-2 hours ahead. I've noticed a "bar" that is segmented that appears below the name, title of book, etc and it I have a 5 hr book, then there are 5 bars and when I push ff, it goes ahead by an hour. How did I get this bar on there, or better yet, how do I get it off so that I can at least ff in increments of minutes. Nothing in manual about this that I've seen. Thanks so much for helping me.

The segments should represent chapters. Pressing fast forward once quickly releasing it should cause it to jump to the next segment.
To fast forward without "jumping" press and hold the fast forward button. You should hear it as it skips ahead.
Alternatively, you can press the select button (center button) and you should see a diamond appear over a bar. You can then scroll ahead or back and the diamond will indicate the play position. Press the select button again to return to the previous display.
Regards.

Similar Messages

Problem with fast forward of trackball in media player of 8330

I'm a fairly new BB owner of a Sprint 8330 Curve. I've checked the newbies site on Crackberry and checked here also. Can anyone help with this problem:
I've downloaded some MP3 audiobooks from my local public library. They play fine, but the problem is that it always starts at the beginning every time. The book is in multiple parts, each of which is 60 minutes long, each of which is treated as a single song. I can see the reverse, pause, and fast forward buttons but I can't get the trackball to work with them.
When I scroll the trackball to the right to fast forward, it scrolls to the next part of the book, not within the same part (song). When I scroll the trackball left, it goes back to the last song. When I scroll it up or down, the whole playlist shows up on the screen and I can scroll through those.
I found one post that talked about how to fast forward video, but it showed a different screen that mine.
I just can't get the trackball to position itself on the progress bar or on the controls.
Any help would be greatly appreciated!
Thanks.

I've got the same problem with my BlackBerry 8330. I have v4.5.0.169 (Platform 3.4.0.51). Once i start an audio file, I am unable to select the scroll bar above the play so that I can fast forward through the song, book, etc.

Trouble with Fast Forward in Sony cassette TCD5M

All functions work well except when placed in Fast Forward, the speed is intermittently slow and stop.
What needs to be adjusted?
Xeno

I need more information about the issue:
1. Are you using the correct tape?
2. Does it happen on all tapes that you've tried?
3. Were those same tapes played fine before?
4. If the same problem happen on all tapes, try cleaning the tape heads. Attached are the steps:
5. If issue recurs on all tapes then service may be required.
If my post answers your question, please click on "Accept as Solution"

Fast forward problem in iTunes 6.0.1.3

Hello
I am using iTunes 6.0.1.3 on Windows XP Pro.
The situation is this. I have a song that is 7:30 long. When I play it normally it works just fine. However when I use the fast forward and advance to time mark 6:45 and start playing it is actually playing the part of the song that is at 6:00 (within a second or two), I let it go ahead and play and when it gets to 7:30 it just stops and jumps to the top of the menu tree (both it iTunes and on my ipod (40 gig 4g).
I have tried the fast forwarding in Music Match and Adobe Audition and it works just fine. I have tested the mp3 file with all the editors and players I have and it works great.
It appears there is some type of synch issue with fast forward and I don't really know where to start.
Any help would be appreciated.
Thank You.
Sony VGC RA810G Windows XP Pro

Well, I've noticed this problem at work (while using my work laptop on a network with other users -- some who have iTunes 5 and some iTunes 6) and at home (using a completely different laptop).
At first I thought it was a configuration problem on my work laptop, but now I'm thinking it has something to do with iTunes itself.
The weird thing is: People at work who use iTunes 5.0 can see the shared drives without a problem. Those with 6.0 cannot. So this problem is replicating itself in two completely different environments -- leading me to believe it's something in iTunes 6. Hmm....
Dell Inspiron 9100 Windows XP

Fast forward problems with Zen Touch (1.01.03 AND PlayForSu

Device: Zen Touch
Firmware: .0.03
Some files cause fast forward problems. Suppose I fast forward to the end of the song. Then I reach the - 00:00.00 marker. HOWEVER, the song goes on and on. It doesn't stop, even if it should (these files aren't corrupt, they work properly on my pc). For e.g. this file causes problems: http://www.hollywoodsaloon.com/podcast/THS-ep9.mp3 and this file http://meandawg.com/audio/MDTop5_0002.mp3.
Anyone know if this is a common problem, and can I fix this by installing the playforsure firmware?Message Edited by Nicos on 07-27-200703:42 AM
Message Edited by Nicos on 07-27-200703:43 AM
Message Edited by Nicos on 07-27-200703:43 AM
Message Edited by Nicos on 07-27-200707:22 AM

I just upgraded the firmware and it didn't help =(
Is there anyone who has the same problem? Maybe someone of you can download these files and try to ffwd to the end with a Zen Touch.Message Edited by Nicos on 07-27-200707:44 AM
Message Edited by Nicos on 07-27-200708:00 AM

Avchd video file made with Premiere Elements 8 won't fast forward or reward

I just finished an AVCHD video project in Premiere 8 and I can't fast forward or rewind the file on my computer with Windows Media Player or in Windows Media Center. The file plays nicelly but it's annoying watch it from start to finish for 45 minutes.
I have a Vixia HF S20 - the video format of the original files was ACHD. After finishing editing the project I choose to save it on my PC (a Dell Inspiron 8100 with I5 - so lots of power awailable) as a MPEG file. I noticed that this format was the only one that gave me the option to save the video in H.264 1920x1080i 30 preset.
The rendering of the video took some 3 hours. It saved the video in AVCHD format and at playback, on my computer screen, it looks just as it should - HD quality - but the lack of controls it's really, really stupid!
Anyway, I need help to figure out what is happening here. Did I do something wrong? Are there other saving settings/presets to choose from that retain the HD quality I am not aware of? Thanks a million in advance!

Well, if you are weighing things against WMP, it could be that PrE could have done something differently.
Now, I am not a fan of WMP, and am REALLY not a fan of RealMedia Player. I liken that latter one to a Trojan, waiting to happen. I last had a version installed about 12 years ago, and would never let another copy near any of my computers.
Besides the two that I mentioned, GOM Player gets high marks, as well.
Good luck,
Hunt

Is there a way to fast forward a podcast/music with some precision?

Is there a magnifying glass tool available to fast forward/rewind podcasts?

Yeah, but come on, that pales in comparison to the control you had with the wheel. I still can't believe that they didn't come up with some kind of touch-screen equivalent of the control you had with the wheel. Holding the button down is like chasing a moving target, although it's better than using your thumb to move the dot, which is completely worthless.

Fast forward problems with 2nd room DVR

I am enjoying my new FIOS set up very much. I have the Home Media option on my HD DVR and STBs. I'm having trouble with the "Fast Forward" when watching shows in my "non" DVR room. When the show is longer than about 45 minutes... after scanning thru commericals the program jumps back to the beginning. This is very frustrating and in some ways defeats the purpose of the multi-room option. I'm considering canceling this option but wanted to check first to see if there's an easy fix.
Thanks in advance.
Arnie

Hey nascar,
All three problems are reported issues and due up to be fixed. The first of your problems isnt a problem with the site, as it is a problem with IMG. The DVR content isnt being flagged properly after finishing it. Number two, you already know what is causing it. I don't know too much about this problem as ad insertion is handled on the network level. I do know they are reporting to be working on a fix at this time. Only a few areas at this time experience this problem as verizon does not locally insert ads in every market. Number three has been around for a while. We have attempted to fix it but the "fix" actually broke more things than it fixed so we had to pull it off the boxes. This one is still a work in progress to be fixed.
TS
TheSanchez
Verizon Telecom
Verizon Content Management Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Fast forwarding problems with 1.9 update

I was wondering if anyone else is having problems fast forwarding a show since the update. When I am fast forwarding it often skips the commerical break and the show up to the next break on anything more than 2x forward. It does this more while viewing DVR programs from the other DVR. It is also stopping the show with 10 seconds left of recording.

If rebooting the box (done by unplugging power cord for 30 seconds then plugging back in) does not fix your problem, please send a private message. This way we can look into this for you.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Is it possibly to fast forward songs on ipod touch with headphones?

I had some 3rd party headphones with the remote control and volume rocker on them and they started breaking. The odd thing was when using them the song would sometimes play at 2 times the speed. I would have to unplug and then replug back in the headphones. I got new headphones so the problem is fixed but how is it possible to do this on purpose?

Hi. Try this. Double click the pause/play button, on the second click, hold the button down. This should fast forward the music.
Hope this helps
Stedman

How do I fast forward a track to a specific time with my iPod Touch in iTunes?

Hello,
I have an iPod Touch and would like to find out how can I fast forward a track to a specific time in iTunes? There is only play/pause, ff & rewind, and volume buttons but no time clock to see where I am in the track. This is the case for podcast and music in iTunes Is there a seting that I need to change?
Thanks for your help.

You can use a third-party program like those discussed here:
new PC: Apple Support Communities

How do you make the effect of a VHS fast forward (so like the lines with the at the bottom)

Essentially I have time lapsed a video to go about 1.5x as fast as normal but I want to be able to make it look like that as well like older VHS tapes when they were fast forwarded. Thanks

check this!!!
http://www.filmimpact.net/plugin/transition-pack-2/
(Impact VHS Damage / the FF >> can be added as a title!!!!)
not free, but it looks like just what you need!!!
hahahahahahahahahahaha!!!!

E90: Music player - Can I fast forward/rewind with...

Is it possible to fast forward or rewind within a single track?
I know I can skip back to the start but if I have a 20 minute audio book and I miss something 15 minutes in, can I rewind back 60 seconds (or so)?
If so, how? It's not obvious to me.
...Lyall

In the music player you have the controls to skip to next track if you quickly press the keys (up or down) If you hold the key then it skips through.
However this works for MP£ I don't recall it working for AAC format. I could be wrong, but I know not all formats suppport it.

Jabber call to voice mail fails with fast busy over VPN

I have an issue that I ran into with CIPC phones over a VPN. If a CIPC phone called over a VPN and started ringing a phone the call would fail with fast busy at the time the call would be forwarded to voicemail. I found the issue was when remote the CIPC phone would negotiate the g.729 codec, when forwarded to a voicemail pilot over a SIP trunk set to g.711 the call would fail due to codec missmatch when no transcoders are present.
So now I am running into what I believe to be the same issue with Jabber, when on premise the calls to voice mail work just fine, but when remote they fail. I can directly call the voicemail pilot without error, but if calling a phone the call gets fast busy at the point we are forwarded to voicemail. Even though all my regions are set to talk to all other regions on G.711 and the voicemail SIP trunk is set to G.711, I believe with the new features in CUCM9 that a lower speed codec has been negotiated since the we are going over the VPN, or Jabber has done this as it knows it's over VPN (not sure). WIth CIPC I could go into the settings and turn off the Optimize for Bandwidth check box and the call would negotiate G.711. With Jabber I can't find anything that would tell my Jabber client to stay on G.711 and I can only imagine this is a codec missmatch as the following are true.
1. CIPC and Jabber share the same line
2. VPN established and CIPC optimised for low bandwidth un-checked
3. Over the same VPN the CIPC phone can leave a voicemail
4. Over the same VPN the Jabber client gets fast busy once forwarded to voicemail
5. Voicemail environment is Exchange-UM over SIP trunk
6. SIP trunk is assigned a Device Pool, that is assigned to a region that all other regions communicate G.711 to
7. On CIPC if optimised for low bandwidth is checked I get the exact same issue as I get with the Jabber client (fast busy when forwarded to voicemail)
Would anyone know what I can do in CUCM 9 to fix this issue, as said no issue when all devices are on premise. Wondering if there is a service parameter or a way to change the codec selection so the Jabber client attempts to always negotiate G.711. The correct answer would be to get some PVDM DSP resources and kick up a transcoder in my resource group, and that may be what I talk them into doing if I have no other options.

We have been getting the exact same thing for almost a year now... since switching to FiOS Digital Voice in May of last year! Every time I call in to report it they 'escalate' the issue but it never gets resolved. The problem seems to be in the initial connection. Most of the time it works fine but, several times a month, after I call to get messages and it starts to play the new message it goes dead and I get the busy signal. I get the same message when I call back: “I’m sorry – that account is in use at this time. Please try again later!” I have even called in with my cell phone and get the same message! I HAVE EVEN used the Internet to see if I could get my messages and, when I hit Play, I get a pop-up saying: “Your Voice Mail box is currently in being accessed; please try again later. If the problem continues, please contact our Customer Support Center at 1-888-553-1555. We apologize for any inconvenience.” This is obviously a software bug that Verizon has no clue on how to troubleshoot OR fix!!! I wonder how many people have the problem and just don’t bother reporting it because of the hassle? When it first started happening they destroyed my entire mailbox and I had to re-enter the complete mailbox setup again – 3 times!!! NEVER let them talk you into that!!! It’s their problem and they need to fix it!!!!!!! I wish I could go back to the ‘normal’ voicemail we originally had… they want hundred$ to switch back because I’d be breaking my #$@%^&* contract! Good luck if you have Verizon………

Firefox crashes when I try to rewind or fast forward netflix?

I have a weird problem with netflix I've been dealing with for awhile and it BUGS me to no end.
Whenever I try to fast forward or rewind on netflix, the browser freezes up and then my whole computer is frozen and dead.
I can click on the progress bar of netflix to wherever, and the little red circle appears and spins for about 4 seconds, and then it just freezes up and a few seconds later my whole computer is pretty much useless and I'm forced to just shut it down improperly.
It's not a huge deal I guess, I just try not to ever need to rewind a little bit when I miss something, but when I do need to, it's annoying as heck.
I use firefox, because I also have a problem watching netflix on chrome (it's choppy and I can't figure that out either, I've tried everything) so my preferred browser of choice is firefox for netflix) but this issue is getting annoying. (If it makes a difference, I can fast forward or rewind netflix fine on chrome, I've tried it just today).
I've figured out that if I rewind and give it like 3 seconds (right before I know its about to crash) and then hit the refresh button, usually my video will reload to the place I wanted to be at.
Anyway, help would be awesome. Thank you :)

'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.
If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting'''

Prob with fast forward

Similar Messages

Maybe you are looking for