Probable bug, titles not rendering

I built a title in Motion and got it to sync into the Lower third section of my title inspector. I made about ten instances of them in my seven minute video. But modifying these titles works sporadically. Sometimes I render to a file and my titles are a previous level, sometimes I exit FCPX and restart and they are ok, but old titles re appear when I exit and restart a third time. I really do not have good control of them. Looks like Apple programmers have updated the screen correctly but are not updating the data structures where the title details are stored.
1. Is there perhaps a workaround, or maybe I am missing something... Any clues would be most helpful, I just can not get the text to behave.
2. How do I best report such bugs to Apple?

I have resolved this question myself. As I was building my Motion template, my onscreen instances in FCPX were updating to my new look very nicely, but under the surface they were getting corrupted.. In my reading, I saw that all of the titles, effects and behaviors in FCP were designed in Motion. I figured: wait, they would have seen such an obvious bug years ago, I must be doing something wrong. So I copied my template under a new name, instantiated it in my FC timeline and re entered the text. No problems so far. And I might add that I did find out how to report a bug to apple. Just googled "how to report a bug in Final Cut Pro X" and there it is.
http://www.apple.com/feedback/finalcutpro.html
And... Apple contacted me within a day to help solve problem, asking me to send system config files and Motion Template. But I had figured it out. and they said to let them know if it re-appears. So... yeah!

Similar Messages

Kdenlive not rendering with title clip

After doing a system upgrade kdelive will no longer render my project, which rendered fine before the upgrade. After I click render, it either gets stuck in "waiting" or it gives an error saying that rendering crashed. If I turn off the title clip, rendering proceeds as normal. Looking around I saw some people with similar problems fixing it by running kdenlive as root, but in my case that didn't solve anything. Anyone have any ideas?
The kdenlive profile I'm using is HD 1080p 59.94fps and I'm trying to render an H.264 video (although trying other formats encounters the same problem).
Some relevant package info:
[root@labby ~]# pacman -Qs kdenlive
local/kdenlive 0.9.6-2
A non-linear video editor for Linux
[root@labby ~]#
[root@labby ~]# pacman -Qs ffmpeg
local/ffmpeg 1:2.1.1-1
Complete and free Internet live audio and video broadcasting solution
local/gstreamer0.10-ffmpeg 0.10.13-1 (gstreamer0.10-plugins)
Gstreamer FFMpeg Plugin
[root@labby ~]#
[root@labby ~]# pacman -Qs mlt
local/mlt 0.9.0-5
An open source multimedia framework

Have you upgraded the system?
I had this same problem until yesterday, only kdenlive did not render at all, with or without title clip. Googling about it, I think it was some kind of conflict with mlt and opencv. Opening kdenlive as root did not work for me. I initially downgraded to the previous version of mlt (0.9.0.1 if I remember cforrectly); with that I could render, but only without title clips present. Solution came with last update of opencv (and re-upgrade of mlt).
Also, while I was looking up this problem, I read about a similar bug being related to the sound, and installed ladspa (just in case all the previous doesn't completely solve your problem).
Last edited by Daerun (2013-07-14 13:52:30)

How to report Safari title bar rendering bug?

I have captured a screenshot of a Safari for Windows bug where the title bar renders incorrectly when the "Develop" menu is turned on. Where can I submit this information?

Click Help -> Report bugs to Apple...
This method allows you to send your bug report directly to Apple. Thanks for sharing this info with the forum. I was not able to reproduce this error.

Theme 25 error page not rendering all CSS/JS - bug?

Hi,
I'm using theme 25 and my theme error page is "No Tabs - No Sidebar", Application Express 4.2.1.00.08
If I receive an error in my application, my error page has no style.
When I compare a page displaying normally and the error page (with the same template) I notice file references are missing from both the JS & CSS "File URLs" attributes.
The template shows JS & CSS respectively - all are included when rendering a normal page. The variables are application level substitution strings.
#IMAGE_PREFIX#libraries/modernizr/2.5.3/modernizr.min.js?v=#APEX_VERSION#
[if lt IE 9]#IMAGE_PREFIX#libraries/respond-js/1.1.0/respond.min.js?v=#APEX_VERSION#
&THEME_LOCATION.js/4_2#MIN#.js?v=#APEX_VERSION#
&TEMPLATE_LOCATION.vbs_1.0.js
&JS_LOCATION.
&THEME_LOCATION.css/4_2.css?v=#APEX_VERSION#
&THEME_LOCATION.css/responsive_grid.css?v=#APEX_VERSION#
&TEMPLATE_LOCATION.vbs_1.0.css
&CSS_LOCATION.What is rendered is only
<script type="text/javascript" src="/i/libraries/modernizr/2.5.3/modernizr.min.js?v=4.2.1.00.08"></script>

<script type="text/javascript" src="/i/themes/our_theme/custom/cons/cons_1.0.js"></script>

<link rel="stylesheet" href="/i/libraries/jquery-ui/1.8.22/themes/base/jquery-ui.min.css" type="text/css" />
<link rel="stylesheet" href="/i/themes/our_theme/custom/cons/cons_1.0.css" type="text/css" />I tried replacing the substitution strings in the missing files with the full path and they are still absent.
Scott

Hi Scott,
thanks for providing the test case. Your problem is similar to bug 16342445 - page rendering error may result in developer toolbar links not working (Bug report - Developer toolbar links
which we have already fixed in 5.0. I have now backported the fix to our next Patch Set (4.2.2)
As a workaround for the time being you could duplicate the CSS and JavaScript files into the "Error Template" property.
Regards
Patrick
Member of the APEX development team
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Safari iOS 7 bug: not rendering images

Safari has a bug, it does not render image from The Economist at all:
http://www.economist.com/node/21586620?fsrc=scn/gp/wl/dc/politicsandpurse
Same goes for Safari modules that are used by other apps, e.g. Google+.
Chrome with data compression renders OK, but it does so because data compression goes through Google server, and only decoding is done on machine.
This all took place on iPad Mini.
Shame on Apple Inc.

Hi there,
I can confirm this bug.
Not sure if this info is relevant, but this is my experience:
I am on the FIDO network, and so are two other people I know.
We all tried blocking numbers, and calls ring right through. Text messages are blocked successfully. (never tried facetime)
I also tried a ROGERS device running IOS7, and was successfully able to block my phone call from ringing through. HOWEVER, my call was forwarded to their voicemail, I was able to leave a voicemail for the person, and they did get an alert that they had a new voicemail.
I have not yet had a chance to test this on Bell, Telus, or any other carriers.
Spoke to Apple, and they advised me to do a hard reset (hold both buttons to shut off and reboot the phone), and if that fails to do an iOS restore.
I have yet to try this, but hopefully someone will have a better solution.

[SOLVED] KDE4.3 is not rendering correctly the images in the desktop

I've posted a bug in KDE because the KDE images are not rendered correctly:
https://bugs.kde.org/show_bug.cgi?id=202829
You can see an image of my desktop at:
https://bugs.kde.org/attachment.cgi?id=35921
As someone suggests, and I also agree with him, it would be a driver problem. My graphic card is "ATI Radeon X1950 Pro" and I'm using the "xf86-video-ati 6.12.2-2" driver. I know that there are other possibilities according to this wiki:
http://wiki.archlinux.org/index.php/ATI
I already tested them with KDE4.2 and xf86-video-ati provided the best result for me.
Someone with an ATI card has the same problem? Which driver would you suggest to me?
Thank you
Last edited by jjjaime (2009-08-06 19:04:12)

Thank flamelab for your help.
The xf86-video-ati-git:
http://aur.archlinux.org/packages.php?ID=15374
fixed all my problems. Probably you've heard about it Now, I don't have any rendering problem and I have enabled the Desktop effects. I tested it with and without the xorg.conf file. Both of them worked, but without the file I don't have my keyboard in Spanish.
I read that it was possible the KMS support. I tested it by changing from graphical to text mode but it takes some time so I guess that it's not enabled. Is there any way to test KMS?
Is it possible to upgrade the AUR driver to the official repository? Meanwhile, I will comment my problem in the KDE site.
Best regards,
Jaime

OutputText not rendering...

hi there,
the following is a sample jsp code that shows the verbatim tag (in the 2nd column of the panelGrid) somehow causes the outputText in the facet of the panelGrid not render the text anymore. the first time you load the jsp page, you can see the outputText being rendered as the header for the table. but if you click on the redisplay button, the outputText is not rendered anymore in the header.
if you replace the verbatim tag with another tag, say outputText, in the 2nd column, then the problem goes away.
any help is appreicated. (i am using sun's ri.)
<html>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<f:view>
<head>
<title><h:outputText value="title"/></title>
</head>
<body>
<h:form>
<h:panelGrid id="panel" columns="2" styleClass="book"
columnClasses="menuColumn, chapterColumn">
<f:facet name="header" >
<h:panelGrid columns="1" >
<h:outputText value="this is the header" />
<f:verbatim><hr/></f:verbatim>
</h:panelGrid>
</f:facet>
<%-- the first column --%>
<h:commandLink>
<h:outputText value="redisplay"/>
</h:commandLink>
<%-- the second column --%>
<%-- this works
<h:outputText value="output text"/>
--%>
<%-- this doesn't work on redisplay: the outputText in the facet is not rendered.
--%>
<f:verbatim >
verbatim text here
</f:verbatim>
</h:panelGrid>
</h:form>
</body>
</f:view>
</html>

This only appears to be happening when stat saving mode is client. I'll file an issue (bug) on this.
Thanks, Roger.

Some text not rendered

Hi.
I seem to have some sort of font problem. Some text on certain website doesn't seem to render proberly. This behaviour is only present with webkit browsers (dwb, luakit, surf, midori, jumanji) and not with firefox or chromium. I can't be sure when this bug was introduced, but I'm pretty certain it was a while ago. A recent update is probably not the problem here.
The text is not rendered when you first visit a site where the bug occurs, but whill render if you mark the whitespace where the text should be with you mouse. I'll post two images to show you what I mean.
How it looks:
http://i.imgur.com/4Gp9j.png
After marking the text:
http://i.imgur.com/5BRw9.png
I'm having the fonts ttf-dejavu and ttf-liberation installed and their paths added to xorg.conf. Nothing else has been done to the font configuration.
Simon

I'll probably file a bug report later tonight (although we're in different time zones so that probably doesn't make much sense to you). I'll just compile the latest nightly first, just to make sure that it wasn't just fixed a couple of days ago.
EDIT: Here's the bug report: https://bugs.webkit.org/show_bug.cgi?id=105132.
Last edited by korkadapa (2012-12-16 19:19:51)

JSF Pages are not rendering correctly when loaded using Non JSF actions

Hi All,
This problem is irritating me and I am posting the same query for the third time here.
When I come from non jsf actions such as page submitting using Javascript, clicking anchor link, clicking normal Html submit button and so on my page is not rendering correctlly .
In other words, My first GET method/Post method works perfectly for the first time when the page is loaded.
But when we try to access the page for the second time, although logical work is perfect in bean, I am getting same old page.
How to resolve this issue?
or
Is this Bug of Sun's Implementation of JSF Framework.
Thanks,
Sudhakar

Hi Sudhakar,
There is a discussion about refreshing a page, Take a look at the below thread
http://swforum.sun.com/jive/thread.jspa?threadID=55660
Hope this what you are looking for
MJ

Inserting new row in Table in 11.1.2 from 11.1.1.3 not rendering table!!!!!

Hey Guys, my status might say noob but i am well seasoned in ADF. We migrated from 11.1.1.3 to the new JDEV 11.1.2. We are doing a test run before we commit to it.
I noticed the following:
We have master detail forms that work flawlessly in 11.1.1.3 when we ran the app under 11.1.2 we noticed that any time you try to add a new row to a table the table does not render. The server logs show the action going through and the count goes up one but the table is not rendered anymore it disappears!!!!!!!!!!!!!!
Now all of this was imported from the 11.1.1.3. all of our tables that have createInsert actions on them are doing this.
If i drag the tables again and set them up from scratch it seems to work fine. Our issue is we have a good 300 of these tables in different panels and panel collections. we have to do all of that work all over again.
No errors show in the log. IS THIS A BUG???????????????
UPDATE: REFRESHING THE PAGE using the Browser Refresh Button Will show the new ROW....... THIS IS NOT GOOOD!!!
Edited by: user8333408 on Jul 7, 2011 9:23 AM
Edited by: user8333408 on Jul 7, 2011 9:24 AM
Edited by: user8333408 on Jul 7, 2011 10:08 AM

Thanks for the reply.
The Project was in version 11.1.3 before I migrated. I had the issue above so I migrated to 11.1.1.4 then to 11.1.1.5 then to the New GREAT 11.1.2 to go by the matrix of support The issue is still there.
Basic Page layout:
SEARCH-MASTER-PANELTABBED LAYOUT (Hold all the CHILDREN RECORDS)
PANEL TAB is made of ; SHOW DETAIL ITEM- PANEL COLLECTION- TABLE.
the panel collection has a toolbar with 2 buttons in it.
My issue varies:
Hit create insert==> record count goes up one but the table does not render (it goes all blank even if records existed in it)
Hit undo budo ==>table still not rendering. (click next on master record then click previous to come back, the table renders correctly.)
other tables do the following:
Hit Create insert == > table shows normally and I can enter new record.
Hit undo ==> table count goes down but table does not render at all anymore.
for this issue i noticed if i set cache results to false the table works after hitting undo
IF I CREATE A NEW SHOW DETAIL ITEM and put exactly what the other tabs have in them and use the same layouts and buttons the new table works great!!!!!!!!!!!!???????????????????? WTF?!?!?!?!
NO ERROR MESSAGES even at finest level are thrown.
I HAD NO ISSUES IN THE PREVIOUS VERSIONS OF JDEV IS THIS A JSF 2.0 BUG????
BY THE WAY JDEV 11.1.2 sometimes CRASHES or Hangs when viewing the Binding of Page when you click on Binding straight from the Design view. I have to open the Binding Page separate to view it. FYI
Edited by: Nottallah on Jul 11, 2011 9:48 AM
Edited by: Nottallah on Jul 11, 2011 9:51 AM

FM10 Book to PDF - show title (not PDF filename) in Reader header?

FrameMaker 10.0.2.419 + Distiller X Pro 10.1.438 -> Adobe Reader X
I have a FM book file with a title along the lines of 'Worked Examples'. When I save it to PDF with Distiller and view the PDF in Adobe Reader X, the reader's header bar shows the PDF filename e.g. wex.pdf, but I want it to show the book title Worked Examples.
I assume there's a setting in Distiller that forces Reader to show the book title not the file name, but having trawled through the settings/help/forums I can't see it. It's probably blindingly obvious (when you know the answer!), but can anyone tell me how I can get Reader to show a book's title in its header?

Note: I have partially solved this issue by loading the PDF into Acrobat X Pro and going to File > Properties, and on the Doc Properties > Initial View tab selecting 'Show = Document Title', and then saving the PDF. I'm hoping to figure out (or get told!) a way of achieving this from my FM10 book file though.

Safari not rendering a page correctly

A webpage I created in Dreamweaver uses drop down menus that are supposed to display just to the left of the link they drop from. In all other browsers they work correctly, but since the latest upgrade in Safari to 3.0.4 as a part of OS 10.4.11 on my Macbook, they are not rendering correctly. Instead they are appearing much further to the left where it's difficult to move the cursor to them before they disappear. Until I changed the color of the drop downs they were disappearing into the background. Any ideas why Safari is not rendering them correctly? I'd like to keep Safari as my primary browser, but if it won't render my own page correctly, what other pages might it be messing up? Address of the page is http://www.montgomeryschoolsmd.org/schools/woottonhs/ The drop downs are connected to the central column list that has small arrows beside the words. They will probably work correctly for you, but won't for me in Safari. What can I do to fix it?
Thanks,
KWolfrey

Hi,
I'm running 10.4.11 with Safari 3.0.4 and as far as I can see the menus seem to work just fine here.
Do you have a custom stylesheet set in Safaris advanced preferences? (Some Safari enhancer applications set one even if you didn't manually set one so double check to make sure.)
Also, do you use PithHelmet?
One quick test you can do to help narrow down things is to try Safari in another user account. This will help us to know whether your problem is local to your account or system wide. If you don't have another account you can use System Preferences -> Accounts -> \[+\] to create a test one (and \[-\] to remove it if needed)
Lastly, I doubt these [errors|http://validator.w3.org/check?uri=http%3A%2F%2Fwww.montgomeryschoolsmd. org%2Fschools%2Fwoottonhs%2F&charset=%28detect+automatically%29&doctype=Inline&g roup=0] have anything to do with your problem since it seems to work fine for me, but you might want to look into them at some point.

h:messages tag not rendering right

Hi All,
I have an <h:messages /> tag in my jsf page and it's not rendering correctly.
This is the tag in my page, verbatim:
<h:messages />
And this is the output when validation errors are created:
Validation Error: "lastName": Value is required. Validation Error: "firstName": Value is required.
That's it. No List, no nothing, just space-delimited validation errors!
When I specifiy layout="table", things are fine, but specifying layout="list" doesn't solve the problem.
I'm using v1.1 of the jsf implementation.
What gives?
Thanks,
John

I got the exact same problem.. Is this already logged as a bug in JSF?

Adobe Form in HRFORMS: Value of Textfield on Masterpage is not rendered!

Hi all,
I design a new form using HRFORMS. When I put a simple textfield on a master page and give the textfield a default value and render my form using transaction PC00_M01_CALC_SIMU, the value of the textfield is NOT rendered.
I am using Adobe LiveCycle Designer 8.0 within SAP and the Adobe Acrobat 7.0.9 for rendering PDF documents.
The ADS Server Version is: 800.20070708051308.406522
The funny thing is, if you do the same things in Adobe Designer (stand-alone) it works perfectly as it should.
Is this a known bug?
Thanks.
Maik

I have figured out myself.
It is a bug in SAP and has also been reported as a bug to SAP.
It works fine with all Adobe Designer stand-alone versions as well as Adobe LiveCycle Forms Server 7 and 8.
As a workaround in SAP you should use STATIC TEXT with "FLOATING FIELDS" instead of TEXT FIELDS.

Customization - Additional column inserted in Inbox - value not rendered

Hello,
   I have a requirement for customizing the inbox and populating the new inbox column with additional value. I made coding updates and everything looks good but the inbox does not render the new value at all. I made these updates and overrides.
Added the column name and value in \apps\cq\workflow\components\inbox\list\json.jsp . When I go to http://localhost:4502/libs/cq/workflow/content/inbox/list.json?_dc=1358787785033&start=0&l imit=40, I am able to see the addition variable and value added and displayed in list.json. For e.g. view of list.json
           "payloadPath": "/content/dam/geometrixx-outdoors/articles/a-simple-plan.jpg",
           "payloadPath_xss": "/content/dam/geometrixx-outdoors/articles/a-simple-plan.jpg",
           "payloadSummary": {
        "lifestage": "Authored",
           "payloadTitle": "a-simple-plan.jpg",
           "payloadType": "dam:Asset",
   2. Override and updated \apps\cq\workflow\extensions\inbox\cols. Added a new column, lifestage.js. Code in that js file is
    "header":CQ.I18n.getMessage("LifecycleStage"),
    dataIndex:"lifestage",
    ranking:30
    3. The inbox/list.json shows the value lifestage correctly. But still it doesnot populate 'lifestage' value in the inbox column. If I replace the dataIndex:"lifestage" with dataIndex:"currentassignee" or any other thing, the Lifestage column in Inbox is populated with the "CurrentAssignee".
Why is the lifestage value though visible through list.json not visible in Lifestage column? What else needs to be additionally done?
Thanks,

Sham,
     I followed exactly all steps like you mentioned. The value was not rendered. I put the alert messages. Please see the code below.
As lifestage is not subpart of payloadSummary, tried both record.get("lifestage") and (record.get("payloadSummary").lifestage but still both alerts shows undefined.I see alerts for 'Inside renderlifestage' but the next alert shows 'undefined'.
renderLifestage: function(value, p, record) {
            alert('Inside renderlifestage');
            alert(record.get("payloadSummary").lifestage);
            alert(record.get("lifestage"));
            return lifestageTpl.apply({
               "lifestage": record.get("payloadSummary").lifestage
Here is the output from inbox/list.json
      "item": "/etc/workflow/instances/2013-01-22/model_360104180212070/workItems/node4_etc_workflow_in stances_2013-01-22_model_360104180212070",
      "title": "Authorship Workflow",
      "description": "Select author for the authorship workflow.",
      "dialog": "/apps/lexmark/dialog/authorshipDueDateDialog",
      "participant": "",
      "currentAssignee": "Administrator",
      "startTime": 1358880950665,
      "metaData": {
        "workItem": {
          "historyEntryPath": "/etc/workflow/instances/2013-01-22/model_360104180212070/history/1358880950664"
        "instance": {
          "currentJobs": "",
          "currentJobs_xss": "",
          "workflowTitle": "authorship_workflow_test",
          "workflowTitle_xss": "authorship_workflow_test",
          "startComment": "authorship_workflow_test",
          "startComment_xss": "authorship_workflow_test"
      "payload": "/damadmin.html#/content/dam/geometrixx-outdoors/articles/downhill-ski-conditioning.jpg",
      "payload_xss": "/damadmin.html#/content/dam/geometrixx-outdoors/articles/downhill-ski-conditioning.jpg",
      "payloadPath": "/content/dam/geometrixx-outdoors/articles/downhill-ski-conditioning.jpg",
      "payloadPath_xss": "/content/dam/geometrixx-outdoors/articles/downhill-ski-conditioning.jpg",
      "payloadSummary": {
        "icon": "/content/dam/geometrixx-outdoors/articles/downhill-ski-conditioning.jpg/jcr:content/rend itions/cq5dam.thumbnail.48.48.png"
      "lifestage": "Authored",
      "payloadTitle": "downhill-ski-conditioning.jpg",
      "payloadType": "dam:Asset",
      "lastModifiedBy": "admin",
      "lastModified": 1323947520464,
      "lockedBy": "",
      "lockedBy": "",
      "timeUntilValid": 0,
      "onTime": 0,
      "offTime": 0,
      "monthlyHits": 0,
      "replication": {
        "numQueued": 0,
        "publishedBy": null
      "scheduledTasks": [
      "inWorkflow": true,
      "workflows": [{
          "model": "Authorship_Workflow",
          "started": 1358880950439,
          "startedBy": "admin",
          "suspended": false,
          "workItems": [{
              "item": "Authorship Workflow",
              "assignee": "admin"
      "scheduledTasks": [
      "comment": "authorship_workflow_test",
      "workflowTitle": "authorship_workflow_test",

Probable bug, titles not rendering

Similar Messages

Maybe you are looking for