Probably a simple keyboard event question...

I'm new to AS3 and can't figure this out...
I want to add the function nextClip(); away from a button to the spacebar. So when I click the spacebar, it runs the nextClip();
btnNext.addEventListener(MouseEvent.CLICK, playNext);
function playNext(e:MouseEvent):void {
nextClip();
index = (index + 1)%(clips.length);
I can figure out how to do it with any key press, but not with just the spacebar.
function checkKeysDown(event:KeyboardEvent):void{
nextClip();
index = (index + 1)%(clips.length);
Thanks in advance for any help.

Take a look at the keyCode propoerty of a KeyboardEvent. Compare it to the Keyboard.SPACE constant. If they'er equal, the spacebar was pressed:
import flash.events.KeyboardEvent;
import flash.ui.Keyboard;
stage.addEventListener(KeyboardEvent.KEY_DOWN, checkKey );
function checkKey( event:KeyboardEvent ):void
if( event.keyCode == Keyboard.SPACE )
trace( "Space!" );

Similar Messages

  • Probably incredibly simple question, so sorry. I have just changed e-mail after many many years and I want to e-mail everyone in my mac mail client with the new e-mail address at the same time.

    Probably incredibly simple question, so sorry. I have just changed e-mail after many many years and I want to e-mail everyone in my mac mail client with the new e-mail address at the same time.

    If you are using Address Book, open it, create a new Group, select all you contacts by click the top one while holding down the shift key and then select the last one. Drag the contacts to the group, then send an e-mail to the group.

  • Flex 4 does not dispatch keyboard events for ENTER key.

    Hello everyone. I think I have a strange problem with Flex 4 Beta (4.0.0.8909). My application has had event listener for keyUp event for a month now and suddenly (two days ago) I've noticed that keyUp event is not dispatched for ENTER (ALT also) key. Anyone know why? By the way, I've tried this with keyDown event, also 4.0.0.8847 version of SDK - still the same: no keyboard events for ENTER (and ALT) key.
    Here is the sample application that has got this issue:
    <s:Application
       xmlns:fx="http://ns.adobe.com/mxml/2009"
       xmlns:s="library://ns.adobe.com/flex/spark"
       xmlns:mx="library://ns.adobe.com/flex/halo"
       minWidth="640" minHeight="480"
       keyUp="application1_keyUpHandler (event)">
       <fx:Script>
          <![CDATA[
             import mx.controls.Alert;
             protected function application1_keyUpHandler (event: KeyboardEvent):void
                Alert.show ("Key up: " + event.keyCode);
          ]]>
       </fx:Script>
       <s:layout>
          <s:BasicLayout/>
       </s:layout>
       <s:TextArea verticalCenter="0" horizontalCenter="0" width="200"/>
    </s:Application>
    If you run this application and try typing anything in a TextArea you will get alerts with key codes. However, if you press ENTER (or ALT), you will get no alert.
    I'm pretty sure the code above is right so that means there is a bug in latest nightly builds of SDK (i would swhitch to an older build if i knew which one does not have this bug).
    Any ideas?

    Flex harUI wrote:
    That's true, but in this case, I think the text editing code is eating ENTER key in order to prevent parents from seeing it and acting on it (like a submit button).  We'll see if we can find a way around that.
    You can get the ENTER key now by listening in capture phase.
    Alex Harui
    Flex SDK Developer
    Adobe Systems Inc.
    Blog: http://blogs.adobe.com/aharui
    The enter key isn't being disposed of by textedit, the attached example code works without error if you a- remove the alert box and b-set the focus to your text area on initialisation. I agree that pressing the enter key then calling a dialog box will result in the enter key being "gobbled up" as  the enter key is overridden by the dialog box code.
    I think the first suggestion should be to anyone don't use dialogboxes for testing code. If for some reason debugging isn't desirable instead of a trace statement a simple label  can be used as a 'fake' trace.
    David
    Message was edited by: David_F57: I worded this wrong, imho there is no need for a work around, the textarea component works as it should. When intercepting 'system' keycodes there is a need to consider the effect of the intercept and code appropriately to that end.

  • Keyboard Event Listener doesn't work in Browser

    Is there a reason why a keyboard event listener would not work if the flash is embedded in an HTML? The rest of my game is running fine in the background, but I can't launch the movieClip "nextCar." My code is below, if that makes any difference...
    function goNow (event:KeyboardEvent): void {
        thisOtherKey = event.keyCode;
        if (thisOtherKey == 32) {
            nextCar.gotoAndPlay(2);
            parkingQue.play();
            tries++;
    stage.addEventListener(KeyboardEvent.KEY_DOWN, goNow);

    This may be a silly question, but have you tryed clicking on your swf after it opens up in the browser, and then trying the keyboard controls?
    I don't know of any issues that cause event listeners to workwhen debugging, but not in a browser.  So, I'm thinking maybe your just not focused on the swf.

  • In Flashplayer, I can crossover mouse and keyboard events. In IrfanView I cannot. Can this be fixed?

    My client uses IrfanView to play SWF files. Unfortunately, he does not use Flashplayer. In Flashplayer, I can crossover mouse and keyboard events with no problem. In IrfanView, the second I click a button, the keyboard events are disabled. Is there a fix?

    Hi Ned. I may have posted this issue a bit early, but this problem is also happening in Flashplayer 10. It's not exclusive to IrfanView.
    Here is something that I encountered during my testing, when I jump to scene 6 using the menu button, I have a play button to jump from one frame to the next frame that stops -- the keyboard events start working. But if all I am doing is jumping scene to scene with the mouse button, the keyboard events are disabled.
    I feel as if the keyboard events only work if I am playing frames in the scene. And if all I am doing is jumping scene to scene using the buttons, the keys will disable.
    I set up the mouse buttons inside a movieclip that all the scenes share. The mouse actionscript is in the movieclip. On the main timeline of each scene is an actionscript for the keyboard events, even though I had to change each function name.
    I feel the actionscript is setup pretty simple. I just wish clicking the buttons would not disable the keyboard events. This may sound redundant, but the keyboard events do the same thing if you use the mouse buttons. It's just preference for the client even though he will need to understand that using the mouse buttons override the keyboard events. He doesn't really lose functionality.
    Keyboard actionscripting below:
    import flash.events.KeyboardEvent;
    stage.addEventListener(KeyboardEvent.KEY_DOWN, onKeyEvent);
    function onKeyEvent(e:KeyboardEvent):void {
    var character:String=String.fromCharCode(e.charCode);
    if (e.keyCode==72) {
      gotoAndStop(1,"master");
    if (e.charCode==49) {
      gotoAndPlay(1,"Distributor");
    if (e.charCode==50) {
      gotoAndPlay(1,"Mirka");
    if (e.charCode==51) {
      gotoAndPlay(1,"Farm");
    if (e.charCode==52) {
      gotoAndPlay(1,"Check2");
    if (e.charCode==53) {
      gotoAndPlay(1,"Check3");
    if (e.charCode==54) {
      gotoAndPlay(1,"Scene2");
    if (e.charCode==55) {
      gotoAndPlay(1,"Scene1");

  • Can we catch keyboard event triggered by an inputfiled?

    Hi all,
    I have a question here:
    When we are doing the web dynpro abap development, if I want to catch the keyboard triggered by an
    input help and handle it, how can I achieve this?
    e.g.   I have an inputfield on the UI,  if user click "F10" on the keyboard, can I catch this kind of event?
    Thanks and Regards,
    Aaron

    Hi Thomas,
    Yes, I'm trying to acomplish an input help for an inputfield.But, the free programmed value or OVS or dictionary search help can fullfill my needs.Here is the situation:
    I have a inputfield on the UI, and next to that , I have another textview, which should be changed according inputfield. e.g.  the inputfield is a user name, and next to that , is the user id. but we only want the input help for user name. so when user select one row iof the search result table, I want that two fields both filled.
    1. the OVS can't meet my need because I can't change the layout of the search result table, I need a table with a tree in it.
    2. free programmed value help can only send back the value of the inputfield. although maybe I can get the user_id's context attribute name and by hardcoding and send back also the user id. but I don't like hardcoding.
    So, I'm wondering whether I could catch the keyboard event. and handle the F4 help all by myself.
    Do you have some suggestion on this?
    Thanks and Regards,
    Aaron

  • Handling keyboard events in applets?! Possible?!

    Hello,
    I wrote a little game that uses keyboard handling events. It is an applet that can also standalone as an application. When i run the program as a standalone application, it handles keyboard inputs fine. ie...i can press the left and right arrow keys and something happens.
    But when i run my program as an applet in a web browser, the applet starts up correctly but does not handle any keyboard events. It only handles mouse events. For instance, if i press the up and down arrow keys, the browser window scrolls up and down!!! And the up and down arrow keys have a specific purpose in my applet.
    QUESTION: how do i get my applet to accept keyboard inputs such as UP,DOWN, LEFT, RIGHT?

    Hmm something went wrong w/ my post so i hope this doesnt show up twice.
    Hey thanks a lot for helping me out. The applet/application is large so here is the main() method and the keyboard event handling class code. My question is how come the keyboard events get properly handled when i run it as a standalone application, but keyboard events go to the browser when i run it as an applet? I would post my entire code but it's over 1000 lines and spread out over 8 files. hehehe.
    Here is main():
      public static void main(String[] args)
          MyProgram applet = new MyProgram();
          applet.isStandalone = true;
          JFrame frame = new JFrame();
          frame.setTitle("Physics: Kinematics");
          frame.getContentPane().add(applet, BorderLayout.CENTER);
          applet.init();                        // initialize the applet inside frame
          applet.addKeyListener(kbHandler);     // kbHandler is a keyboard handling object
          applet.start();
          frame.setSize(APPLETWIDTH,APPLETHEIGHT);
          Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
          frame.setLocation((d.width - frame.getSize().width) / 2, (d.height - frame.getSize().height) / 2);
          frame.setVisible(true);
          // private inner class to terminate the Application when frame closes
          frame.addWindowListener(
            new WindowAdapter()
                public void windowClosing(WindowEvent e)
                    System.exit(0);
          frame.show();
       }"kbHandler" is the keyboard event handling object. It gets initialized in the applet.init() method.
    kbHandler = new BMkeyboardHandler();And here is the keyboard event handling code:
    // ===== keyboard event handler ===========
       private class BMkeyboardHandler implements KeyListener
            public void keyPressed(KeyEvent e)
                pushedKey = e.getKeyCode();
                // General administrative key actions
                if(pushedKey == KE.VK_H)
                    actionArea.toggleHelpMenu();
                    actionArea.repaint();
                else if(pushedKey == KE.VK_C)
                    actionArea.toggleCtrlMenu();
                    actionArea.repaint();
         }So there it is. Again, the program handles events fine as a standalone application. But running it as an applet in a browser (and even the appletviewer) doesnt let me handle keystrokes.

  • Probably super simple...ACL/VLANs

    I have a VLAN 6 that is dedicated to a Partner organization (they share our bandwidth and schedule conference rooms with our Exchange).
    Question is how do I configure ACLs to direct ALL traffic to and from Partner, exception of accessing our Outlook Web Access and DNS servers in VLAN 1, and our websites in VLAN 2 ?
    This is probably super simple but I keep ending up with traffic going where I don't want it to.  Thanks so much...
    (And if anything else seems wacky about this setup, blame the last IT guy)

    What is the platform you are using??? ASA, router??
    Thanks,
    Varun Rao
    Security Team,
    Cisco TAC

  • Probably a simple solution, but . . .

    Hi there - There is probably a simple fix to this - and it probably doesn't even matter, but I'm curious. When I attach an exported file to an email, it is attaching as a picture of the document, rather than as an icon with the document's name. The thing is, it used to attach as the icon and not the actual document. I know it probably doesn't matter, but I liked it better when attaching the icon representing the doc. I've probably hit a button or flipped a switch I didn't know I hit or flipped, but where is it and how can I reset it? Thanks a lot!
    Craig

    Craig,
    I may not have understood the original question. The comment and action James has posted would relate to whether a file would View in Place as you compose -- it does not impact what is sent.
    However, I thought you were describing the file Icon as having a Preview or Thumbnail, and not a full View in Place? If a file has a photo-like thumbnail, it is the result of the saving of the file, and not something in Mail.
    Please clarify?
    Ernie

  • Probably a simple SQL Query - Newbie

    I want to select entries from a table that has 2 columns where the first column value is contained within the 2 column....Does that make sense?
    The first is a varchar that contains a value for a customer. The second is a varchar that contains a a textual description of a problem the customer has. My problem is that I only want to select the entries in the table where the second column contains a description that includes the first column value.
    eg. I want to select rows that have the following condition:
    column1 has value of "customer1"
    column2 has a value of "an error was reported by customer1 on service blah"
    but not these
    column1 has value of "customer1"
    column2 has a value of "an error was reported by customer2 on service blah"
    This is probably a simple question but I've spent time looking at how to do it and can't seem to manage...any help would be appreciated....Thanks

    Hi Barbara,
    I've never used the CONTAINS operator before. I compared the use in this situation to the other methods and found the others to be FAR less resource intensive, despite working on unindexed columns, as I demonstrate below.
    It would seem that CONTAINS is unsuited to this type of simple query. Can you shed any light on this, from the perspective of somebody who has used it before? Is this type of performance penalty normal? If so, it could seem that CONTAINS is fairly useless next to LIKE.
    [email protected]> desc test;
    Name                                        Null?    Type
    COLUMN1                                              VARCHAR2(20)
    COLUMN2                                              VARCHAR2(100)
    [email protected]> select count(*) from test;
      COUNT(*)
         10000
    Elapsed: 00:00:00.00
    [email protected]> select * from test where instr(column2, column1) > 0;
    10000 rows selected.
    Elapsed: 00:00:00.18
    Execution Plan
       0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=23 Card=8328 Bytes=532992)
       1    0   TABLE ACCESS (FULL) OF 'TEST' (TABLE) (Cost=23 Card=8328 Bytes=532992)
    Statistics
              5  recursive calls
              0  db block gets
            821  consistent gets
              0  physical reads
              0  redo size
         702263  bytes sent via SQL*Net to client
           7838  bytes received via SQL*Net from client
            668  SQL*Net roundtrips to/from client
              0  sorts (memory)
              0  sorts (disk)
          10000  rows processed
    [email protected]> select * from test where column2 like '%'||column1||'%';
    10000 rows selected.
    Elapsed: 00:00:00.18
    Execution Plan
       0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=23 Card=8328 Bytes=532992)
       1    0   TABLE ACCESS (FULL) OF 'TEST' (TABLE) (Cost=23 Card=8328 Bytes=532992)
    Statistics
              5  recursive calls
              0  db block gets
            821  consistent gets
              0  physical reads
              0  redo size
         702263  bytes sent via SQL*Net to client
           7838  bytes received via SQL*Net from client
            668  SQL*Net roundtrips to/from client
              0  sorts (memory)
              0  sorts (disk)
          10000  rows processed
    [email protected]> create index testidx on test(column2) indextype is ctxsys.context;
    Index created.
    [email protected]> select * from test where contains(column2, column1) > 0;
    10000 rows selected.
    Elapsed: 00:00:56.80
    Execution Plan
       0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=25008 Card=4 Bytes=284)
       1    0   TABLE ACCESS (FULL) OF 'TEST' (TABLE) (Cost=25008 Card=4 Bytes=284)
    Statistics
          55201  recursive calls
              0  db block gets
          85857  consistent gets
              0  physical reads
              0  redo size
         702263  bytes sent via SQL*Net to client
           7838  bytes received via SQL*Net from client
            668  SQL*Net roundtrips to/from client
            204  sorts (memory)
              0  sorts (disk)
          10000  rows processedThanks in advance,
    Anthony

  • Movieclip.x movement using keyboard event

    Hi, im working on a game project and i have a question about movie clip movement using keyboard event.
    Basicly i have a character on screen and it can move on the x axis using the left and right buttons.
    Im making my charater move by changing the x value of the character movieclip but i find very it laggy and not smooth and if im going point by point
    then it's too slow.
    Whats the best way to make the character move so that the transition will be smooth.

    Ok obviously you've left out where you add your eventListener, i'll assume that's a KEY_DOWN event. When the user holds down a key, that key event is triggered once immediately and then after a pause it is triggered at regular intervals. Check this out by holding down the up/down arrow and watching this browser window scroll.
    That's not the movement you'd be looking for when moving a character in a game. Instead, you'd be setting a variable on KEY_DOWN to indicate the character direction - it could be an integer for example that you increase by 1 if the user pressed RIGHT or decrease by 1 if the user pressed LEFT.
    In addition to your KEY_DOWN eventListener, you could have an ENTER_FRAME and  KEY_UP eventListeners set up:
    The enterFrame event handler could move the character in the direction specified in your direction variable. This is where you might ensure your character doesn't go beyond its limits in both directions.
    In the keyUp event handler, you could do the converse of what you did in the keyDown handler(increase by 1 if the user released LEFT, decrease by 1 if the user released RIGHT).

  • No keyboard Events on a Window

    Hello Java community,
    I can't understand why, if you build a simple Window (not a Frame), all keyboard Events are simply ignored !! Everything acts as if the Window can't get the focus, because no LOST_ or GOT_ FOCUS events are triggered. This means that you can't handle keyboard events with a Window and therefore a Textfield will not work (however it still receive mouse events ??). BUT it perfectly works with a Frame , which extends from Window! Strange isn't it ?
    I've heard on other forums that , to be eligible for focus a Window must have:
    - its owner Frame (the one given in the constructor) :
    * displayed on screen,
    * containing a focusable component.
    - itself, containing a focusable component.
    thus i respect theses limitations, i still can't get any keyboard events
    pleaze help, i am writing a text area component and without keyboard events ...

    Thanks for the answers BUT,
    I have already read the javadoc in every ways and I am sure I respect perfectly all the conditions to have my WINDOW focusable.
    No, there is another problem, a strange one. In fact, my program works fine under Windows I can type characters into my Textfields but once executed under Linux : no keyboard events! Therefore, no character type allowed. I display in the console, all events that are incomming into my Window, and ALL events are ok (mouse, windows..) except keyboards ones. When I press a key, nothing appears in my console, that's why I think keyboards events are caught and not dispatched to the Window.
    I noticed an interresting fact when using my app in Applet. For example, I launched my application with Mozilla (Netscape 4, JRE 1.1). I displayed an empty Window on screen, when my mouse passes over it or when I click, the Java console showed me these events. When I try to hit some keyboard keys, nothing except for certain keys such as F, G, D, J and numeric keys. In fact, these keys are shortcuts to some of the System class (F calls Finalization, G=Garbage Collector, D=Debug Mode...). I truely think that on a Window, all keyboard events are send to the console. Another fact that proved me that i was right : I tried my app with JRE 1.2, and when I wanted to type characters into my TextField (which is on my Window), the typed characters appeared in the console !!!!
    A JAVA-experimented person told me to redirect the standard input to my own inputStream... but how ?
    Any ideas of solutions ?

  • AutoSuggest Widget and Custom Keyboard Events

    Hi,
    I'm using the 1.6 and AutoSuggest widget for a search form.
    I've managed to customise it slightly that when a user selects one
    of the suggestions with the mouse a hidden form field is populated
    with an ID (so that we don't actually have to search for the
    selected terms, we can just reference the hidden field value, if
    it's defined).
    I've used a very simple onclick= on the suggstion div (the
    autosuggest itself is almost identical to the examples) that sets
    the value of the hidden field to the ID when it's clicked. And
    works fine. Although I can't seem to get it to work with keyboard
    events. I've tried onkeydown=/onkeypress=/etc but not joy. The
    Autosuggest widget keyboard navigation works, (up, down and enter
    to select the suggestion) but does it overide any other attempts
    for keyboard events? Or am I doing something wrong?
    All the code is the same as the example apart from the actual
    suggestion div. Here it is:
    <div class="list" style="font-size:10px;"
    onkeydown="setHiddenValue('{hiddenid}')"
    onclick="setHiddenValue('{hiddenid}')">{name}</div>
    And the setHiddenValue function (which works fine onclick):
    function setHiddenValue(hidID) {
    document.getElementById("intHiddenID").value = hidID;
    Thanks in advance for any help
    Al

    Just an update - and not the best solution. I've gone in and
    edited the spryAutoSuggest.js to fit our needs exactly. It was a
    just case of editing the key press events for the enter key (13 -
    it's commented //enter key), which now gets the hidden field by ID
    and set the value required to it.
    Surprised there was no other suggestions... maybe something
    to be resolved in 1.7?
    Al

  • Capture keyboard events using c# in SBO

    How do I capture keyboard events(especially those with Control like CTRL-R) in SBO using C#??

    Payal,
    You will want to look at the UI API Help in the SDK Help Center and specifically look at the "SendKeys" method.  This will allow you to send keyboard key strokes to the UI.
    Your post is related to the Business One SDK.  That forum for questions and answers for the Business One SDK is located on the SAP Business One page on SDN and then under the SAP Business One Discussion Forum.  This forum is for the SAP Business One Integration Technology.
    HTH,
    Eddy

  • Send a keyboard event from labview to C#

    Hi,
    We currently have a program in c# that takes keyboard inputs from a user and will fly a quadrotor. We aim to have a LabView .vi generate keyboard commands based on our experiment and send the commands to the c# code creating a feedback loop where the .vi will keep track of sensor and experimental data.
    Our problem is that we have tried many different methods to send the keyboard commands in LabView. 
    1) http://zone.ni.com/devzone/cda/epd/p/id/3711
    2) http://forums.ni.com/t5/LabVIEW/Send-keyboard-commands-to-another-windows-program/td-p/330670/page/2
    as well as other variations and similar .vi's that do the same thing. Here is an example of a .vi used to press the letter "t" once.
    http://i.imgur.com/hwmjZ.png
    All of them can write the string to a text (open notepad put cursor in blank window) file but none can do it in such a way that it is detected by the c# code. On my own I can open and run the c# code and press keyboard buttons myself and the commands are recognized, so I think it could be an issue with how LabView sends the keyboard events and how c# reads them. Here is the c# code segment that we are using to read the input commands:
    public override List<String> GetPressedButtons()
              KeyboardState state = device.GetCurrentKeyboardState();
              List<String> buttonsPressed = new List<String>();
              foreach (Key key in Enum.GetValues(typeof(Key)))
                        if (state[key])
                                  if (!buttonsPressed.Contains(key.ToString()))
                                            buttonsPressed.Add(key.ToString());
              return buttonsPressed;
    Can anyone help trying to figure out why using the keybd_event function in LabView can not interface correctly with the above detection code in c#? I can provide any code and clarification if you think it can be helpful.
    Thanks,
    Andy

    Hi,
    I can't say with certainty where the problem is or even how many there are. I do know that the KeyboardListener.cs class should work according to what I have read online. I also know that if I press the keyboard myself then the state is changed and the correct action is taken. If I try to issue an event from Labview then the event is not captured. Here is the code, it is rather large ~20 MB.
    https://www.dropbox.com/s/vsvcje1ro364otu/ARDrone.zip
    https://www.dropbox.com/s/p3h3tj8bcqc29gk/Forward_backward0924.vi
    The key listener is in ARDroneInput>Utils>KeyboardListener.cs and the polling takes place in ARDroneInput>KeyboardInput.cs
    The reason I wanted to use keyboard inputs is because the quadrotor we are using takes keyboard commands W,A,S,D,T and L. Initially I thought having Labview issue these commands would be the simplest method. That may not be the case.
    I was just thinking that it is not necessary that key events are sent from Labview. Instead, one could send an array representing the frequency of each button press rather than the button press directly. In that case an array that is updated continuously from Labview will just have to be kept track of in the C# code. The C# can then convert that to whatever control input we want. Can it be easier to send a vector of numbers in real time to C#?
    If you think it is better to establish a connection between Labview and C# using .NET to send keyboard commands (rather than the vector idea above) can you explain that a little more? How does one go about doing that? If you think the vector idea is simpler how should the interface be set-up?
    I just talked with my collegue and we think that maintaing a .txt file in Labview and having C# read it is the best option. We will begin working on that and will update you tomorrow.
    Thanks,
    Andy 

Maybe you are looking for

  • How do I get rid of firefox 4, and go back to the previous version?

    Its slow, flash barely works, lags , freezes. Want to go back the previous version that actually worked

  • Ssl error has occured

    cannot log in to the App Store or iTunes - error An SSL Error has occured and a secure connection to the server cannot be made. What should i do? The help community does not address this

  • Repairing permissions frequently - daily

    Can anyone shed light on this puzzle?: I have to repair permissions at least 2 or 3 times every day. I generally run only Mail 2.1.3, Safari 3.1.2, Filemaker Pro 5.5v2, Quickeys 3.2.3, and a small number of always-on gadgets (Sidenote, TypeIt4Me, Ala

  • Finding source timecode in sequence

    I'm trying out CS6 coming from a Avid background. (My issue with CS 6 is a I edited a 40 minute location shot into a sequence, now I need to insert graphics into the sequence based on timecode from the original source clip. -I do see the "sequence" T

  • Iphone 5 video import error in iphoto 8

    I have a iphone 5 and some of my videos wont import to iphoto 8. It says its unreadable, so then I tried importing another video from my phone but it works. Its only some of the videos I took at a concert that does not work. The videos are pretty lon