Probably a simple problem to fix [solved]

I am running GNOME on the latest arch 32-bit iso and for some reason I get this error every time I try to read from a cd/dvd or usb drive. any ideas?
Cannot mount volume.
Error org.freedesktop.DBus.Error.AccessDenied.
A security policy in place prevents this sender from sending this message to this recipient, see message bus configuration file (rejected message had interface "org.freedesktop.Hal.Device.Volume" member "Mount" error name "(unset)" destination "org.freedesktopHal")
Last edited by tony5429 (2007-06-09 14:46:26)

thanks. silly me..i ran
$gpasswd -a username storage optical
and it didnt add me to both. i see now that it must be run as 2 separate commands. thanks everyone

Similar Messages

Probably a simple problem.

I left it with with them because they needed to fix a couple of things because I had problems with random shut downs and such. They told me they replaced a buncha stuff.
Anyway, since I got it back, when I go onto my desktop and click on an icon it won't open. I have to go into file and open it or right click and open it. And for some reason, when I double click the top portion of a window, it doesn't minmize like it used to?
How can I fix this?
It's become really annoying.
I'd appreciate some help.
Thanks!! (;

Okay.
How to reset the PRAM - quoted from the KB article:
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Repairing permissions:
Open Finder -> Applications -> Utilities and click on Disk Utility. Click on your hard drive and then the First Aid tab (you should be there already) and then click the Repair Permissions button.
You know how to set the System Preferences, right? Click on the Apple logo, then click on System Preferences, click on Appearance, and there's a little checkbox that says "Minimize when double-clicking a title bar." You wanna make sure that's checked.
This should help.

A simple problem to solve... I hope.

$A simple problem to solve... I hope. Hi Guys,
This is my first post on this forum, and I'm hoping that the problem I'm encountering at the moment is down to my own stupidity rather than technical issues.
Firstly, I should mention that I have used my X-fi sound blaster xtreme audio card for months now in my old PC which was running XP 32 bit with no problems whatsoever. In the last day I've built a new PC which has the following specs:
Intel I7 860
tb HDD
4gb Ram
Windows 7 Ultimate 64
Nvidia GTX280
Sound was very quiet and of a fairly poor quality to begin with, and I soon realised that I hadn't installed any drivers for the soundcard, so I went ahead and did so. Following this, I enter a **bleep**storm of illogical proportions which to me makes absolutely no sense.
I get no sound from my speakers or headphones whatsoever. I have a pair of M-Audio AV-40 monitors at the moment, and no matter what I try, I can't get sound to work. When I go to the mixer, it seems odd to me
http://yfrog.com/7fxfiproblemj
I thought that there would be options for Line Outs etc, but I may be wrong.
I've run the diagnostic tests and everything comes back absolutely fine.
The weirdest thing however is the fact that when I test the speaker configuration, it responds to nothing except from the 7. surround sound, and my speakers react to the bottom left and bottom right speakers. I've tried installing, re-installing drivers no end. Looked for fixes and checked google as well and found nothing that matches the description of my problem.
Am I missing out on something really obvious here? Or is there a more technical underlying factor ?behind this issue.
Any help is hugely appreciated, thanks?

Thanks for all of you help, but I still don't think the problem's solved.
Here's the problem explained more thouroloy. I have a java program that uses lots of jar files. That means that to run my program, I need to have the CLASSPATH set to pick up all of these jar files. I'd also like to be able to give someone a copy of this program on a cd and have them immediately run it without having to assume anything about their configuration (except that they have java installed).
So what I did was create a batch file that (at least temporarily) sets up the CLASSPATH to meet my needs. It then calls "java myProgram <all the other parms...>".
Things run fine, except that the command window that gets opened up stays around while Swing program runs, and doesn't close until I close the Swing program. I'd like that that didn't happen.
-- echo off
Not going to do anything to help. It will stop the batch commands from echoing, but that's about it.
-- javaw
I tried this and it also doesn't work. It seems that neither java nor javaw return until after the program that it is running actually end.
-- Executable jar
Sounds promising, but will it work? How do I make sure the CLASSPATH is properly set before running this?
Thanks again for all of your hlep.
Sander Smith

Hello Simple problem - don,t know how to solve it. With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was de

Hello
Simple problem - don,t know how to solve it.
With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
I was like ????#$%?&*(???
Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! - is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
The problem is that scrolling is enable while clicking and it bugs.
How to disable it ??
Simple question - can't find the answer !

Helllooo !?
sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
Thanks !!

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply.

Why do I get an alert saying "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. How can I solve it??

The full alert is " Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behaviour when accessing security features."
This is just started three/four days ago. I need assistance quickly as I can't access any secure sites e.g bank accounts/homepage etc.

See [[Could not initialize the browser security component]]

Probably a simple fix ...

why doesnt my page look the same in the browser as it does in dreamweaver?
< what it looks like in dreamweaver ... perfect
< what it looks like in my browser ... all spread out and messed up
there is probably something simple i am doing or not doing but i cannot figure it out hopefully someone can help me out
thank you so so so so much!
here is this page's code if needed:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Designs by Christina Mae | School { print }</title>
<script type="text/javascript">

</script>
<style type="text/css">

</style></head>
<body onload="MM_preloadImages('slices/school-motion/motion_rollover_09.gif','../slices/school- print/print_rollover_04.gif','../slices/school-print/print_rollover_06.gif','../slices/sch ool-print/print_rollover_10.gif','../slices/school-print/print_rollover_09.gif')">
<table width="1024" height="384" border="0" align="center" cellpadding="0" cellspacing="0">
<tr>
    <td width="221"><table width="221" border="0" cellspacing="0" cellpadding="0">
      <tr>
        <td width="221"><img src="../slices/school-print/print_01.gif" width="221" height="73" /></td>
      </tr>
      <tr>
        <td><img src="../slices/school-print/print_03.gif" width="221" height="71" /></td>
      </tr>
      <tr>
        <td><a href="../web&motion/DESIGNS_motionweb.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image8','','../slices/school-print/print_rollover_04.gif',1)"> <img src="../slices/school-print/print_04.gif" name="Image8" width="221" height="18" border="0" id="Image8" /></a></td>
      </tr>
      <tr>
        <td><img src="../slices/school-print/print_05.gif" width="221" height="33" /></td>
      </tr>
      <tr>
        <td><a href="../freelance/DESIGNS_freelance.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image11','','../slices/school-print/print_rollover_06.gif',1)" ><img src="../slices/school-print/print_06.gif" name="Image11" width="221" height="21" border="0" id="Image11" /></a></td>
      </tr>
      <tr>
        <td><img src="../slices/school-print/print_07.gif" width="221" height="552" border="0" usemap="#Map3" /></td>
      </tr>
    </table></td>
    <td width="803"><table border="0" cellpadding="0" cellspacing="0">
      <tr>
        <td height="655" nowrap="nowrap" bgcolor="#F9F3DE"><script type="text/javascript" src="swfobject.js"></script>
<div id="flashcontent">SimpleViewer requires JavaScript and the Flash Player.
<a href="http://www.macromedia.com/go/getflashplayer/">Get Flash.</a></div>
<script type="text/javascript">
var fo = new SWFObject("viewer.swf", "viewer", "800", "600", "8", "#f8f0dd");
fo.write("flashcontent");
</script></td>
      </tr>
      <tr>
        <td nowrap="nowrap"><table width="605" border="0" cellspacing="0" cellpadding="0">
          <tr>
            <td width="553"><p><img src="../slices/school-print/print_08.gif" width="591" height="113" /></p></td>
            <td width="52"><table border="0" cellspacing="0" cellpadding="0">
              <tr>
                <td width="42"><p><a href="../resume.pdf" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image13','','../slices/school-print/print_rollover_09.gif',1)" ><img src="../slices/school-print/print_09.gif" name="Image13" width="212" height="23" border="0" id="Image13" /></a></p>
                  </td>
              </tr>
              <tr>
                <td><p><a href="mailto:[email protected]" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Image12','','../slices/school-print/print_rollover_10.gif',1)" ><img src="../slices/school-print/print_10.gif" name="Image12" width="212" height="22" border="0" id="Image12" /></a></p>
                  </td>
              </tr>
              <tr>
                <td><p><img src="../slices/school-print/print_11.gif" width="212" height="68" /></p>
                  </td>
              </tr>
            </table></td>
          </tr>
        </table></td>
      </tr>
    </table></td>
</tr>
</table>
<div align="center"></div>
<map name="Map" id="Map"><area shape="circle" coords="114,449,42" href="DESIGNS_home.html" />
</map>
<map name="Map2" id="Map2"><area shape="circle" coords="112,447,40" href="DESIGNS_home.html" />
</map>
<map name="Map3" id="Map3"><area shape="circle" coords="114,445,43" href="../DESIGNS_home.html" />
</map></body>
</html>

It's always nicer to see the live page on remote server so we can see the images and everything in context.
Try changing this:
body {
background-image: url(../webimages/background.gif);
background-repeat: repeat;
float: inherit;
to this:
body {
background: url(../webimages/background.gif) repeat;
Also, remove the height="value" from your tables. It's not valid code.
HTML Validator - http://validator.w3.org
CSS Validator - http://jigsaw.w3.org/css-validator/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain.

I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.

Very Simple Problem-- Need help in method selection process

Hello,
It's difficult to explain the background of the program I am making-- but I am stuck at a very simple problem, that I can only solve with a very long block of if statements:
I have 3 possible numbers-- 1, 2, or 3.
Imagine two numbers are already taken-- say 1 and 2. I want a variable to set itself to the number that's not taken (3).
So, again: If two numbers were taken say 2 or 3-- I want the variable to be sent to the other one that isn't taken-- 1.
Thank you for your help,
Evan.

Actually, I'll just tell you the context of the program-- here is what I have so far:
This program is meant to simulate Monty Hall Problem:
http://en.wikipedia.org/wiki/Monty_Hall_problem
The program sets up an array of three possible values. Each one of those values represents a door with either a goat or a car behind it. It then randomly sets one of those values to 1 (in order to represent a car as per the Monty Hall problem), and 0's represent goats.
The user, which is simulated by the program (does not involve actual interaction), chooses a door initially.
The game show hosts then reveals a door that is not the users initial choice, but IS a goat ( an array value of 0).
For example if the array was [0][0][1]
The user could pick door one (array position 0). Which is a goat.
The game show host then reveals a goat that is not the users choice-- which would be array position 1.
After the game show host reveals the goat-- I want the user to always switch his decision to the only other remaining door that was not his first choice.
Then I wanted the computer to test to see if his final choice is the one with a car. And to tally up the amount of times he got it right.
--Sorry that was long winded:
import TerminalIO.*;//imports TerminalIO package for system.out.println
import java.util.*;//import java.util for random
public class Monty_Problem
     int doors[]= {0,0,0};
     Random rand= new Random();
     double wins,totals=0;
     public void carAssignment()
          int car_door= rand.nextInt(3);
          doors[car_door]=1;
     public int judgesChoice(int judgeDoor, int initialChoice)
          if(judgeDoor != initialChoice && doors[judgeDoor]!=1)
               return judgeDoor;
          else
               return judgesChoice(rand.nextInt(3), initialChoice); //infinite loop right here that I cannot remedy. I want the program to have the judge pick a location that is not occupied by a '1' and is not the user's choice.
     public void gamePlaySwitches()
          int initialChoice= rand.nextInt(3);
          int judgeDoor = 0;
          int secondChoice= 0;
          judgeDoor= judgesChoice(rand.nextInt(3), initialChoice);
          //This part is meant to have the user switch choices from his initial choice
               // to the only other choice that hasn't been revealed by the judge.
          while(secondChoice == initialChoice || secondChoice== judgeDoor)
               secondChoice++;
          if(doors[secondChoice]==1)
               wins++;
               totals++;
          else
               totals++;
     public static void main(String [] args)//creates the main menu
          Monty_Problem a= new Monty_Problem();
          int games=0;
          while(games!=100)
                    a.carAssignment();
                    a.gamePlaySwitches();
                    games++;
          System.out.println(a.wins/a.totals);
}Edited by: EvanD on Jan 11, 2008 4:17 PM

A Simple problem I`m sure BUT ITS DRIViNG ME CRAAAZY!

Hello,
I hope someone can help.
I published a site with the first podcst episode using iweb.It went through onto iTunes bo problem so all`s good... so today I put together the 2nd episode, submit it to itunes as before...up comes the `..please provide the link to the podcast RSS feed ...' etc
Podcast Feed URL:http://rss.mac.com/jubemeg/iWeb/Bandwagon/podcast/rss.xml is the address I`m given as with the first episode, I press continue and ....Unfortunatly THE FEED HAS ALREADY BEEN SUBMITTED.Course it has! Help!
I have looked through the tech specs and I cant make head nor tail of it can someone help me in real basic layman language!
Thank you,
Jules

Jules, it's a simple problem with a simple fix. (and it drove me nuts too)
Publish to .Mac (or your server if it's different)... then PING itunes to let them know to go look for new content on your server (or .Mac). You PING iTunes by cutting and pasting the url addy below into safari and clicking return. You'll get an error message, don't worry, it's supposed to happen. About an hour later, maybe a bit longer, your new episode will be available.
DONT submit your podcast by selecting the "SUBMIT PODCAST TO ITUNES" menu selection again. That command is for your first submission, not your subsequent ones. Think of your podcast as a book. And each episode is a chapter. When you ping iTunes, they go get the whereabouts of the new chapter and make it available for the world to come and read, hear, or watch.
the PING url is...
https://phobos.apple.com/WebObjects/MZFinance.woa/wa/pingPodcast?id=INSERTYOURFE EDIDHERE
Your feed ID number is in your original email from the itunes folks when they sent you your acceptance email and said that your podcast was now up and running on the ITMS.
Hope this helps.
Jim
20" Imac 1ghz (lmpstd), Mini, G4 Dual 1.8(upgraded), G4 400, Powerbook,12", eMac Mac OS X (10.4.4)

Simple compare condition fails [Solved: Bug 4619731]

Edit: I have found the root of the problem, and Simple compare condition fails [Solved: Bug 4619731]. I have opened a Service Request 7045745.993 on the problem.
Original text:
I have encountered the most bizarre bug today. An associate is trying to debug a 1900 line package that was NOT terminating a loop properly.
The package has the code:
    Exit when x <> y;where x and y are VARCHAR2(8) variables.
The problem is that even though the values were UNequal, the loop never ended. We added dbms_output debugging code to display x and y, and we could easily see that their values were NOT equal.
For instance, one was 19824E1A and the other was 19824E2A. Or one was 19824E1A while the other was 99999999.
I even added a block of code re-testing the condition like this:
If x <> y then
    dbms_output.put_line(x||'<>'||y);
Else
    dbms_output.put_line(x||'='||y);
End if;But no matter what the values of x and y, it always reported them equal.
I found two workarounds:
1. concatenate a character (I used a period) to the end of each variable in the condition.
    Exit when x||'.' <> y||'.'2. Or, add an anonymous block before or after the Exit when..., such as:
Declare
v varchar2(2);
Begin
v := 'AB';
End;Curiously, when I replaced the v := 'AB'; with NULL;, the bug came back.
This bug occurs on Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
I am not sure where to start to try to solve or report this problem. It pretty much destabilizes the entire PL/SQL programming foundation for all our packages. It leaves me wondering where else the code may be failing.
Has anyone seen something like this reported before?
Edited by: Steve Cosner on Aug 27, 2008 10:05 PM

No offense taken, SY. I was just trying to express how aware I am of the issue of comparing null values in condition statements.
All I can do here is underscore that it is not an issue with null values. The problem is with the statement in the first line. To prove that it was not null values, I coded the second line following the first:
    exit when x <> y;
    dbms_output.put_line('x='||x ||' and y='||y);The output from the run showed in the first pass through the loop, x and y were equal and were not null. So the process ran correctly that time. But in subsequent passes through the loop, they were NOT equal and were not null, but the debugging code was executed.
There is no way the values were null.
I certainly wondered about the null issue when I concatenated a character to the variables in the conditional test. But my debugging lines first confirmed that they were not null. I suspect more that the bug has something to do with the size of the package and the variables being exactly eight characters, which is 64 bits, which has special significance in many computer languages.
Regarding your concern of the variable names and scope issues, the actual variable names in the actual code can be seen below (I just used x and y for simplicity within this thread):
    LOOP
      EXIT WHEN V_LAST_PERIOD <>
          SIPK0003.COURSE_ADJUST_REC.ACAD_REC_PERIODwhile the silly anonymous block that caused the process to work, using the variable named v, was the actual code. There is no way we use simple one-character variable names in a 1900 line package. There is no way the scope of variable V extended outside the embedded anonymous block. My point was that somehow, changing the size of the compiled package object, or at least the size of the code generated for the loop process caused the package to run correctly. In fact, thinking about the
Declare V... Begin Null; End; sequence, I'll bet the PL/SQL compiler is sharp enough to notice that it was a do-nothing block, so never included it in the compiled object. As soon as I assigned V a value, the code WAS included, so the size of the generated code for the loop changed, and somehow, that caused it to run correctly.
Regarding the use of the package.record.column value above, we even copied the value to a local variable, and then used the local variable in the Exit When statement. Doing that made no difference.

Probably a simple solution, but . . .

Hi there - There is probably a simple fix to this - and it probably doesn't even matter, but I'm curious. When I attach an exported file to an email, it is attaching as a picture of the document, rather than as an icon with the document's name. The thing is, it used to attach as the icon and not the actual document. I know it probably doesn't matter, but I liked it better when attaching the icon representing the doc. I've probably hit a button or flipped a switch I didn't know I hit or flipped, but where is it and how can I reset it? Thanks a lot!
Craig

Craig,
I may not have understood the original question. The comment and action James has posted would relate to whether a file would View in Place as you compose -- it does not impact what is sent.
However, I thought you were describing the file Icon as having a Preview or Thumbnail, and not a full View in Place? If a file has a photo-like thumbnail, it is the result of the saving of the file, and not something in Mail.
Please clarify?
Ernie

Probably a simple SQL Query - Newbie

I want to select entries from a table that has 2 columns where the first column value is contained within the 2 column....Does that make sense?
The first is a varchar that contains a value for a customer. The second is a varchar that contains a a textual description of a problem the customer has. My problem is that I only want to select the entries in the table where the second column contains a description that includes the first column value.
eg. I want to select rows that have the following condition:
column1 has value of "customer1"
column2 has a value of "an error was reported by customer1 on service blah"
but not these
column1 has value of "customer1"
column2 has a value of "an error was reported by customer2 on service blah"
This is probably a simple question but I've spent time looking at how to do it and can't seem to manage...any help would be appreciated....Thanks

Hi Barbara,
I've never used the CONTAINS operator before. I compared the use in this situation to the other methods and found the others to be FAR less resource intensive, despite working on unindexed columns, as I demonstrate below.
It would seem that CONTAINS is unsuited to this type of simple query. Can you shed any light on this, from the perspective of somebody who has used it before? Is this type of performance penalty normal? If so, it could seem that CONTAINS is fairly useless next to LIKE.
[email protected]> desc test;
Name                                        Null?    Type
COLUMN1                                              VARCHAR2(20)
COLUMN2                                              VARCHAR2(100)
[email protected]> select count(*) from test;
COUNT(*)
     10000
Elapsed: 00:00:00.00
[email protected]> select * from test where instr(column2, column1) > 0;
10000 rows selected.
Elapsed: 00:00:00.18
Execution Plan
   0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=23 Card=8328 Bytes=532992)
   1    0   TABLE ACCESS (FULL) OF 'TEST' (TABLE) (Cost=23 Card=8328 Bytes=532992)
Statistics
          5 recursive calls
          0 db block gets
        821 consistent gets
          0 physical reads
          0 redo size
     702263 bytes sent via SQL*Net to client
       7838 bytes received via SQL*Net from client
        668 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
      10000 rows processed
[email protected]> select * from test where column2 like '%'||column1||'%';
10000 rows selected.
Elapsed: 00:00:00.18
Execution Plan
   0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=23 Card=8328 Bytes=532992)
   1    0   TABLE ACCESS (FULL) OF 'TEST' (TABLE) (Cost=23 Card=8328 Bytes=532992)
Statistics
          5 recursive calls
          0 db block gets
        821 consistent gets
          0 physical reads
          0 redo size
     702263 bytes sent via SQL*Net to client
       7838 bytes received via SQL*Net from client
        668 SQL*Net roundtrips to/from client
          0 sorts (memory)
          0 sorts (disk)
      10000 rows processed
[email protected]> create index testidx on test(column2) indextype is ctxsys.context;
Index created.
[email protected]> select * from test where contains(column2, column1) > 0;
10000 rows selected.
Elapsed: 00:00:56.80
Execution Plan
   0      SELECT STATEMENT Optimizer=ALL_ROWS (Cost=25008 Card=4 Bytes=284)
   1    0   TABLE ACCESS (FULL) OF 'TEST' (TABLE) (Cost=25008 Card=4 Bytes=284)
Statistics
      55201 recursive calls
          0 db block gets
      85857 consistent gets
          0 physical reads
          0 redo size
     702263 bytes sent via SQL*Net to client
       7838 bytes received via SQL*Net from client
        668 SQL*Net roundtrips to/from client
        204 sorts (memory)
          0 sorts (disk)
      10000 rows processedThanks in advance,
Anthony

TS3899 In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps.

Probably a simple problem to fix [solved]

Similar Messages

Maybe you are looking for