Probably easy fix, onboard sound related!

Hi all..
I just purchased a MSI K8N Neo4-F S.939 nF 4 ATX PCI-E16X/PCI-E1X/PCI-E4X/4PCI 7.1 Ch. Audio,Gb LAN; RAID(0, 1, 0+1); SATA; ATA133 for a system i built for a friend, and I've got a current 5.1 surround sound setup, and I've got all of the appropriate color-coded connections in accordingly, and in the REALTEK AUDIO MANAGER thing if I go to speaker configuration, i've selected 6CH audio, and during the test or if i manually test the speakers from all directions, it works perfectly! However, no software I have is using all 5 speakers! Only front left + front right are working for all of my applications (so far have tested ABSYNTH3 and a couple DVD programs)
I'm sure this has come up before!
HELP!
thanks :]

Check the settings on your dvd program to make sure it is on 5.1
Also not all programs/games use 5.1 so that could be why ther is no output from some
Hopefully!

Similar Messages

1.5 tracks in newly installed XP have delay (probably easy fix)

I just switched from Windows 7 to XP because the former was crashing three times a day. Anyway, I just started from scratch, and I'm pretty sure I downloaded the right drivers and everything.
What happens is any track I put in over a drum track SLOWLY becomes more and more off. It starts out recording fine, then it eventually just gets completely off-kilter from the drum track.
I have a great laptop that has run well for the past three years doing this 50-track projects. 1.7GB duo dual core, 3GB. Nothing running in the background, everything else goes smoothly. Any ideas on what it could be? Adjustments I can make? (Because the buffer stuff is pretty confusing.)
Thanks guys.

It may well be an easy fix, if it's AA1.5. Either hit F4, or go to Options>Settings and then the Multitrack tab. Make sure that there's a check in both
Correct for Drift in Recordings, and
Correct for Start Sync in Recordings
... and try again. Hopefully this will fix your problem.

Second day after updating to iOS 6 on my iPhone 4, my contacts have duplicated. Probably not all but many, and my contacts already numbered in the thousands. Please tell me there is an easy fix to this problem!! I already had to go through contact-by-co

Second day after updating to iOS 6 on my iPhone 4, my contacts have duplicated. Probably not all but many, and my contacts already numbered in the thousands.
Please tell me there is an easy fix to this problem!! I already had to go through contact-by-contact when I bought this phone and added contacts from my Blackberry and MS Outlook on the phone. Many duplicated at that time and Apple said the only fix was to go through each one and decide to keep or delete. I really don't want to do that again!

I had this problem while I had iOS 5.1.1 installed for many months. Fortunately I only have about 150 contacts and only about half of them duplicated. I found that my problem was the way thing were set up in Outlook. I removed all of the duplicates and corrected everything in Outlook contacts (ignoring the address book) and have not had the problem since, Hope this helps.

When I burn a disc from a playlist in iTunes, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

When I burn a disc from a playlist in iTunes on my MacBook, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

No, this standard has been implemented for several decades.
How iTunes remembers audio CDs - http://support.apple.com/kb/TA27785
It is just conceivable you burned a CD that exactly matched one already in the Gracenote database. Gracenote uses track count and duration to decide what CD it is you have in a computer. If you have one that matches that it will label it. You could conceivably even have one that matches it that is not the correct one.
This script will only work on Macs:
http://dougscripts.com/itunes/scripts/ss.php?sp=cdtexttocdinfo - script to use CD-text file on CD to label CD in iTunes

Kt3 ultra onboard sound microphone fix

Was there ever a fix for the kt3 onboard sound microphone problem. I have trawled through the forums for an hour now and all I can find is complaints and no fixes?
Can someone point me in the direction of the fix if there is one!
cheers gazrat

Thanks for the speedy reply guys.
What the question initially intended to ask was if
the onboard sound card allowed me to play games
with full surround sound support using eax/dolby.
I assume the answer to this question is no.
With regards to playing DVDs, yes I can get the 6
channel sound, and the speaker test in the tray
confirms this.
But as I don't really watch DVDs on my computer,
and use it more for games and work, I assume I
have to get a SB Live or some sort to actually get
eax/dolby support within games. Is this correct?
Thanks again.
Athlon XP1800+
MSI KT3 Ultra
256 MB DDR266 RAM
MSI Geforce2 Ti 64mb DDR
Surecom 100 Mbps
Seagate 40GB 7200rpm
Aopen 52x

Onboard Sound Cuts out after a while - anyone know why?

Hiya peeps,
Ever since I bought my MSI motherboard, the onboard sound has been a bit dodgy. Whenever I play games like UT2004 or halflife, the sound cuts out after several minutes of play. It only comes back again if I restart the game, but then after a few minutes it will cut out again. Anyone else experienced this?
I have tried altering all the game settings from safe mode sound drivers to full EAX H/W accelerated but this has made no difference to the stability of the audio. I have been updating all the drivers to my system as and when MSI live update picks them up, os I am up to date on that front. I have a lot of decent kit (PSU etc) in my machine and its not overclocked in any way at all. Also I have the most up to date direct x too.
My system spec is below, please help chaps.
PS im trying here as MSI have not responded to any of my email queries about this problem.
Regards,
MrG.
CPU: P4 2.8E Prescott 800FSB (200MHz * 14.0) HT Enabled
MEM: 1GB Corsair XMS3200C2PT Platinum CAS2
MTB: MSI 865PE Neo2-PFISR (MS-6728) Bios V3.7
GFX: GexCube Radeon 9800 Pro
HDD: Hitachi Deskstar 7K250 120GB ATA-100 8MB
PSU: Enermax EG465AX-VE(G)(FMA) 460W
OS : WinXP SP1, all drivers up-to-date and Liveupdate up-to-date
Nothing is overclocked and all BIOS setitngs are set to the defaults.

I had the same problem, this is how i fixed it:
Uninstall everything relating to the drivers for your sound from both the control panel AND the device manager, do not let windows PnP install ANY drivers. Then manually install the latest drivers, not from live update, but from MSI's website, then run the installer package. Make sure you reboot at every step, since that's what I did, and no more sound cut-out.
See, we have many of the same specs in our computers, this is probably the same issue I had.

K7N2 Delta Onboard Sound Disable Question

I have a K7N2 Delta motherboard with a MSI FX5600 256MB DDR video card. I am currently using the onboard audio. Ever since I first built this computer I have been having nearly every game I play on it lock up and freeze. I am thinking that it is a sound issue that is causing this problem, so I want to install a Creative Labs Sound Blaster Live. I have several questions that I hope someone can answer as I have exhausted all avenues and still don't have any answers. Here are my questions:
1. How do I disable the onboard sound? ie Which jumper is it and what are the
jumper settings?
2. Which PCI slot is recommended for installing the sound card so that I won't
any IRQ conflicts?
3. Is this actually an audio problem or is there something else wrong with this
motherboard or video card?
This is becoming very frustrating because when the computer locks up all I can do is just reset without shutting down. I'm becoming more and more worried that if this continues unabated I'm going to crash the hard drive and have to replace it only to have the problem persist. I hope someone can give me specific answers to my questions. Thank you in advance for your help.

First. Is it K7N2 Delta-L or Delta-ILSR (the one with an actual Soundstorm chip on it)? If you have the actual Soundstorm chip, use it! It will sound much better than an SBLive. Assuming you have the normal K7N2 Delta-L like I have:
1. To disable the onboard sound, first uninstall the drivers for it, then you need to go into the BIOS by holding the Delete key while you boot up. Then find the section "Integrated Peripherals" and in that section "Onboard Devices". Press Enter and find AC97 Audio and disable it. There are no jumpers.
2. PCI slots 1, 2 and 3 are usually not shared with other stuff like you AGP or USB ports. PCI Slot 3 is the ideal choice. 1 is usually covered by your video card fan anyway. For the SBLive, on Windows XP/2000, get the newest drivers from Creative Labs. The file is named "LiveDrvUni-Pack(ENG).exe" and it's file size is 23.3 MB (24,451,404 bytes). They have fixed the "nforce2 + gameport incompatibility".
3. The problem may be audio related...or not. Which drivers are/were you using for your onboard audio? nvidia or Realtek? Actual Soundstorm chip or crappy software codec? It could also be video card related. Fastwrites? 8x or 4x AGP?

Unable to make microphone to work on NVIDIA MCP55 onboard sound card

Hello.
Some time ago, I bought a nice HP xw9400 Workstation (with Dual Core AMD Opteron 2216) from Germany. Despite it's starting to become old by today's standards for some stuff like gaming, it's still quite okay to use and the SAS HDD makes it boot fastly. And it has one of the best cases, you can plug PCI/PCIe/PCI-X cards very easily and it's very nice to change or add HDDs. Maybe I'll upgrade the CPUs (I can upgrade the bios and it seems it can support better CPUs) if I find them on eBay or other place.
I have less problems with Arch than the rest of distributions, but I still have weird issues. Despite my computer hardware is somewhat old, I still experience weird problems everywhere (it seems I have some kind of weird "luck").
I have problems using my microphone under Arch with "NVIDIA Corporation MCP55 High Definition Audio (rev a2)" onboard sound card , here is the relevant info.
http://www.alsa-project.org/db/?f=5907a … f5d2b9d88c
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Dec 12 00:00 by-id
drwxr-xr-x 2 root root 80 Dec 12 00:00 by-path
crw-rw----+ 1 root audio 116, 7 Dec 11 23:58 controlC0
crw-rw----+ 1 root audio 116, 9 Dec 12 00:00 controlC1
crw-rw----+ 1 root audio 116, 6 Dec 11 23:58 hwC0D0
crw-rw----+ 1 root audio 116, 5 Dec 12 01:34 pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Dec 12 02:33 pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Dec 11 23:58 pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Dec 12 01:28 pcmC0D2c
crw-rw----+ 1 root audio 116, 8 Dec 12 01:43 pcmC1D0c
crw-rw---- 1 root audio 116, 1 Dec 11 23:58 seq
crw-rw----+ 1 root audio 116, 33 Dec 11 23:58 timer
% arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC262 Analog [ALC262 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC262 Alt Analog [ALC262 Alt Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 1: Camera [USB Video Camera], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
% arecord --list-pcms
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, ALC262 Analog
Default Audio Device
sysdefault:CARD=NVidia
HDA NVidia, ALC262 Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
default:CARD=Camera
USB Video Camera, USB Audio
Default Audio Device
sysdefault:CARD=Camera
USB Video Camera, USB Audio
Default Audio Device
front:CARD=Camera,DEV=0
USB Video Camera, USB Audio
Front speakers
surround40:CARD=Camera,DEV=0
USB Video Camera, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Camera,DEV=0
USB Video Camera, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Camera,DEV=0
USB Video Camera, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Camera,DEV=0
USB Video Camera, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Camera,DEV=0
USB Video Camera, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Camera,DEV=0
USB Video Camera, USB Audio
IEC958 (S/PDIF) Digital Audio Output
(I was unable to make the microphone on the usb webcam to work, but that's another issue I'll ask in a separate forum thread...)
% head -n 1 /proc/asound/card0/codec*
Codec: Realtek ALC262
I found this in Gentoo forums, very similar issue and a fix that don't works (see in a bit further)
http://forums.gentoo.org/viewtopic-t-88 … art-0.html
And this...
http://ubuntuforums.org/showthread.php?t=1672571
http://ubuntuforums.org/showthread.php?t=1475588
https://bugs.launchpad.net/ubuntu/+sour … bug/577178
http://www.linuxforums.org/forum/ubuntu … rking.html (2007 forum post, but very similar)
http://lists.opensuse.org/opensuse-bugs … 02583.html (2009)
https://bugzilla.redhat.com/show_bug.cgi?id=522101 (2009, closed in 2011)
https://bugzilla.novell.com/show_bug.cgi?id=474383
-> http://lists.opensuse.org/opensuse-bugs … 02583.html (it seems the bug tracker works quite bad or there's some issue looking at that issue, so here's the mailing list message about it)
I also tried create /etc/modprobe.d/alsa-base.conf and add the following line to it...
options snd-hda-intel model=6stack
And no luck! I tried it and still appear both "Rear Mic" and "Front Mic". I'll provide a screenshot later.
I'm starting to understand this, maybe it can help me...
http://alsa.opensrc.org/Record_from_mic
I tested both sound hardware by using arecord and audacity, no luck at all
% arecord -Dhw:1 --dump-hw-params
Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
HW Params of device "hw:1":
ACCESS: MMAP_INTERLEAVED RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: 16
CHANNELS: 1
RATE: [8000 48000]
PERIOD_TIME: [1000 32768000]
PERIOD_SIZE: [32 262144]
PERIOD_BYTES: [64 524288]
PERIODS: [2 1024]
BUFFER_TIME: (1333 65536000]
BUFFER_SIZE: [64 524288]
BUFFER_BYTES: [128 1048576]
TICK_TIME: ALL
arecord: set_params:1233: Sample format non available
Available formats:
- S16_LE
% arecord -D hw:1 -f S16_LE myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -V myfile.raw
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -V -r48000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r48000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r44100 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r16000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 16000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
(I tried them with my user and root, same results)
I had an Sound Blaster Audigy 4 Pro, but removed it to see if there was some problem. I'm still unable to use my Microphone even on onboard audio hardware. I'll try to use it once I have the microphone working
Regards.
Last edited by timofonic (2013-12-12 04:11:57)

Sorry, that was wrong, I meant
arecord -l
Have you tried making a virtual loopback device like above and using
arecord -vv -fdat out.wav
You should see the #### fluctuate as you speak into the mic. If not, then unmute and turn up your mic in alsamixer. That loopback device will allow you to capture your sound card and hear it at the same time. Another way to do it is to use a jumper from line out to line in on your sound device. You won't be able to hear it while you record though.
If your sound device works, then you can capture what's going through it. You'll need to determine which vitual device your mic is.
Example
arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC662 rev1 Alt Analog [ALC662 rev1 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7

How do i fix my sound

how do i fix my sound on my iphone

Hey there,
I was having an intermittent sound issue and discovered it was related to Bluetooth. Whenever my phone was pairing with a Bluetooth device (handset or car) most of the sound was also being transferred to that device and I didn't realize it. Turning off Bluetooth instantly fixed the issue. Or you can increase the volume (select aux/USB source) and you'll hear the missing sounds!
Good Luck

To everyone with IOS6 Sound related issues & Others

If you are facing a problem of not having any system sounds, notification sounds, no calls or other software sound related issues I'd suggest you read below it's a stupidly simple fix and it should solve most software issues after an immediate iOS6 update:
After updating unplug the phone from your computer and leave the phone alone for 5-10 minutes, if you still have problems: reboot, wait a few minutes and all sound related problems should be fixed.
When I updated to iOS 6 I had lost my system sounds, so I unplugged from the computer, rebooted the phone and still no go. I decided to just let the system "settle in" for a bit, let it lock and when I unlocked after 5-10 minutes sounds were back and everythings up and running again.

Well, to break it down. After my sounds finally came back (2nd time losing them) last night I decided to restore the phone in itunes. I did it twice. First time I backed up my data. Second time I restored it as a factory iPhone. Both times guess what NO SOUNDS! I also realized that last night I had lost my sounds after charging my phone and unplugging it from the data cord. I still have ringtones (when someone calls), but text messages, emails, and any other alert tones do not work. I cannot turn the volume up or down with the side buttons and also music does not play. It doesn't even have a slide bar at the bottom.
I am on the phone with apple care now. They seem to not be aware of the problem at all.
While I was on the phone with them my sounds ended up coming back, imagine that. Hopefully every time I charge my phone I am not going to have this issue.

TS1717 On Windows Vista and tried several times to start up my iTunes, but keep getting 'application failed MSVCR80.dll error-7 (windows 126) is this an easy fix ...?

On Windows Vista and tried several times to start up my iTunes, but keep getting 'application failed MSVCR80.dll error-7 (windows 126) is this an easy fix ...?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99442)

K8T Neo-FIS2R onboard sound limitation?

Reading southmikes unofficial guide, it seems you can't use both onboard sound AND a PCI sound card (such as a Turtle Beach Santa Cruz).
Is this still correct with the 1.6 BIOS? I want to use the microphone input on the motherboard, but the the TBSC for output.

Quote
Originally posted by thegrommit
Reading southmikes unofficial guide, it seems you can't use both onboard sound AND a PCI sound card (such as a Turtle Beach Santa Cruz).
Is this still correct with the 1.6 BIOS? I want to use the microphone input on the motherboard, but the the TBSC for output.
It was fixed with BIOS v1.3. I use an SB Live! and the onboard sound card, too.
It was not driver dependent, the BIOS disabled the sound card that is behind the ISA bridge.
How can I say that? ISA bridge? There ain't no stinking ISA slot on this mobo!
Look at this listing that I obtained under Linux, particularly the devices labelled
as 00:11.0 and 00:11.5.
$ /sbin/lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South]
00:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
00:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
00:06.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
00:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
00:07.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
00:08.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 (rev 10)
00:0d.0 RAID bus controller: Promise Technology, Inc.: Unknown device 3373 (rev 02)
00:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown device 3149 (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
01:00.0 VGA compatible controller: ATI Technologies Inc RV250 [Radeon 9200 SE] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
The numbers are BB:DD.FF (BB - bus number, DD - device number, FF - function or subdevice) Function number 00 means it's a main device, function numbers other than 00 with the same
bus and device number is something on or behind the main device.
With BIOS v1.2 and lower, 00:11.05 was not in the list when the SB Live! was plugged in.
The BIOS disabled the device. Or did not keep the info about it - it's almost the same since
Linux also use the PCI BIOS calls to detect the devices. I did not try "direct" mode that
talks directly to the PCI bridge.

Disabling onboard sound on K8T Neo?

Hello,
I'm probably being really stupid here but I just can't seem to find the BIOS setting to disable the onboard sound. Can't find it on any of the BIOS pages, can't find it in the manual and there doesn't seem to be a dipswitch on the board itself.
Anyone?
TIA

I must have looked through that menu 20 times and not noticed the submenu. Cos it's in yellow rather than white I read it as a title rather than a menu item.
I am stupid. Cheers.

Is the onboard sound better than SB live!

I been thinking of using onboard sound right now Im using a old sound blaster live! its not the 5.1 What do you guys think ? See my sig for mobo type
This is the sound chip on the mobo Realtek ALC650 it has 4 to 6 chan. and it also has a
S-bracket that has analog to digital audio outputs by intergrating both SPDIF.
Anyone here use there onboard sound? I would like to buy sometime till I can get a new soundcard I want to free up a pci slot.

Uninstall the SB Live, and all related components thru device manager, then go to control panel>add or remove programs. Remove any Creative programs related to the SB Live. Shutdown and remove the SB from the system. Upon bootup, enter BIOS, and in the "Integrated Periphrials" section, set the AC97 to enabled, and reboot.
During bootup, it should find the AC97, and ask for the drivers, cancel the prompt. Then open the folder containing the drivers, and install from there.
One thing to check while you have the case opened to remove the SB, look for the front audio header, usually "JAUD1", there needs to be 2 jumpers installed in order to direct sound to the rear audio ports. These are normally installed before the board ships, but can be left off. Never hurts to look. I believe the jumpers go on 5-6 and 9-10. Check your manual to verify. the front audio header is located at the bottom of the board, near the front. If you have no manual, click here to download one.

I have a ibook that powers up but has no display, is it an easy fix? how much will it cost?

I have a ibook that powers up but has no display, is it an easy fix? how much would it cost to fix

Hi,
Can the sounds of an active hard drive be heard at some point (indicating a normal startup)?
There is a problem with the graphics processing unit (GPU) and its ball grid array (BGA) on some iBook computers, leading to similar symptoms. Reflowing (resoldering) the BGA is a work for specialists, and is going to be expensive. A web search will return a number of more or less realistic alternative attempts to solve the issue. Outside pressure applied to the affected area has sometimes been used for troubleshooting, or even as a temporary "solution".
It is of course possible that the iBook in question has a completely different fault, such as a broken display cable.
See also the following article about resetting the Power Management Unit (PMU): http://support.apple.com/kb/ht1431
Jan

Probably easy fix, onboard sound related!

Similar Messages

Maybe you are looking for