Probably Gateway configuration problem

Hi Friends
As an overview I will tell you the following. We have installed a landscape with some Solutions of SAP Netweaver 7.0, among others, SAP ERP 6.0 SR3 on AIX 6.1 OS plataform and Oracle 10.2.0.4 database. The development layer DEV was installed sucessfully in cetralized environment.
In the QAS layer we´ve installed the same solution within the same DB and OS components, but in an distributed environment. As we have readed the installation guide, we mounted /sapmnt/, but the RFC conection was unsuccesfully executed.
Aditional to this, we tried to configure the mail service via the transaction SCOT, I have configured this in the development systems and also I can view BRTOOLS dba logs detail. In case of SCOT in the QAS systems when I try to process mails to send, a message appears that says "NO SENT MESSAGES" or something like this. That doesn´t happens in DEV systems.
Do you have an idea about these possible related problems. I´ve thought that maybe in distributed installations some pos-instalations activies need to be applied in order to gateway service.
I appreciate your help.
Sorry for the lage message, but I have some time dedicated to this problem
Thanks.
Enrique Sánchez Trueba
SAP Basis Consultant.

Hi,
I think that you need to install a SAP stand alone gateway on the DB host.
That is what I had to do on a MSCS cluster where the DB is on one node and SAP CI on the other node.
Regards,
Olivier

Similar Messages

Help debugging standard Gateway configuration problem

I've got a Mac Pro running Lion Server.
It connects to a fixed IP / direct connection to the Internet on Ethernet 1.
The machine, and the services it supports all have good access to the Internet.
It is configured to support a LAN from Ethernet 2. Wifi connection is disabled.
I used the Gateway Assistant to set up, and:
Ethernet 2 is configured at 192.168.2.1, with DNS set manually to OpenDNS values. These are the same values as used on Ethernet 1's fixed IP connection (which works fine).
NAT is set to IP Forwarding and Network Address Translation, External Interface is Ethernet 1, and Port Mapping Protocol is enabled.
DHCP is set to distribute values to en1 (which is Ethernet 2) in range 192.168.2.2 to 192.168.2.127. DNS is set to 192.168.2.1.
The problem I have is, is that although client connections to Ethernet 2 set up pefectly, the connected machines have no connection to the internet: unable to see fqdns or ping IPs directly.
I must be doing something wrong... but can't see it. Hopefully someone else can...
Thanks in advance for whatever help anyone can provide.

Here are the outputs: hope they are informative
Server - ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
          options=3<RXCSUM,TXCSUM>
          inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
          inet 127.0.0.1 netmask 0xff000000
          inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
          options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4>
          ether 00:17:f2:00:8e:06
          inet6 fe80::217:f2ff:fe00:8e06%en0 prefixlen 64 scopeid 0x4
          inet 46.33.146.45 netmask 0xfffffff8 broadcast 46.33.146.47
          inet 46.33.146.46 netmask 0xfffffff8 broadcast 46.33.146.47
          media: autoselect (1000baseT <full-duplex,flow-control>)
          status: active
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
          options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4>
          ether 00:17:f2:00:8e:07
          inet6 fe80::217:f2ff:fe00:8e07%en1 prefixlen 64 scopeid 0x5
          inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
          media: autoselect (100baseTX <full-duplex,flow-control>)
          status: active
en2: flags=8823<UP,BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
          ether 00:19:e3:0a:41:ae
          media: autoselect (<unknown type>)
          status: inactive
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
          lladdr 00:16:cb:ff:fe:6c:6f:f6
          media: autoselect <full-duplex>
          status: inactive
vnic0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
          options=3<RXCSUM,TXCSUM>
          ether 00:1c:42:00:00:08
          inet 10.211.55.2 netmask 0xffffff00 broadcast 10.211.55.255
          media: autoselect
          status: active
vnic1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
          options=3<RXCSUM,TXCSUM>
          ether 00:1c:42:00:00:09
          inet 10.37.129.2 netmask 0xffffff00 broadcast 10.37.129.255
          media: autoselect
          status: active
Server - nslookup
Server:
208.67.220.220
Address:
208.67.220.220#53
Non-authoritative answer:
45.146.33.46.in-addr.arpa
name = www.2gc.org.
Laptop / LAN - ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
          options=3<RXCSUM,TXCSUM>
          inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
          inet 127.0.0.1 netmask 0xff000000
          inet6 ::1 prefixlen 128
          inet6 fd77:51b9:835:a2f3:62c5:47ff:fe08:7d12 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8823<UP,BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
          ether 60:c5:47:08:7d:12
          media: autoselect (<unknown type>)
          status: inactive
p2p0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 2304
          ether 02:c5:47:08:7d:12
          media: autoselect
          status: inactive
en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
          options=4<VLAN_MTU>
          ether 58:55:ca:22:9a:af
          inet6 fe80::5a55:caff:fe22:9aaf%en2 prefixlen 64 scopeid 0x7
          inet 192.168.2.2 netmask 0xffffff00 broadcast 192.168.2.255
          media: autoselect (100baseTX <full-duplex,flow-control>)
          status: active
Laptop - nslookup
Server:
192.168.2.1
Address:
192.168.2.1#53
45.146.33.46.in-addr.arpa
name = www.2gc.org.

Audio Configuration problem detected after install

During the download of the new ITunes version I had a major power failure. I went back and completed the download and after the installation I got an error message that ITunes could not be opened due to an audio configuration problem detected. I went to the Apple site and downloaded a new version from scratch and after the install I got the same audio error. Any Suggestions?

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
Hope that helps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Could not start the app due to a configuration problem

Hi Gurus,
I have an issue to be resolved asap, need your assistance.
I have implemented SAP Fiori apps (Approve Purchase Order, Approve Purchase Contract, My Leave Request and Approve Leave Request)
We have only one Gateway system and 3 back end ECC systems.
Gateway Client 220 is integrated with ECC Dev and performed all the configurations and tested successfully.
We have created a new client 320 with a copy of client 220, Integrated 320 client to ECC quality system and performed necessary configurations and while testing Approve Purchase order and Approve Purchase Contract tiles are loading the count from ECC Quality system but when I click on the tile it throws an error "could not start the app due to a configuration problem" and when I click the error ot is being redirected to Client 220.
From the inspect element I found below error
2015-04-13 12:22:13 INTEROP service's ResolveLink operation returned 2 targets for hash '#PurchaseOrder-approve', first one is used. - used target: {"id":"PurchaseOrder-approve~652","shellType":"FLP","postParameters":"","text":"Approve Purchase Orders","applicationData":"SAPUI5.Component=ui.s2p.mm.purchorder.approve","applicationAlias":"ApprovePurchaseOrders","applicationType":"URL","url":"/sap/bc/ui5_ui5/sap/mm_po_apv"}
ignored target: {"id":"PurchaseOrder-approve~65k","shellType":"FLP","postParameters":"","text":"Approve Purchase Orders","applicationData":"SAPUI5.Component=ui.s2p.mm.purchorder.approve","applicationAlias":"ApprovePurchaseOrders","applicationType":"URL","url":"/sap/bc/ui5_ui5/sap/mm_po_apv"} sap.ushell_abap.adapters.abap.NavTargetResolutionAdapter
I did not found any duplicate # key entries in table USOBHASH.
Any response is highly appreciated, thanks in advance
Regards,
Srujan

Hi Michael,
Thanks for that, I have raised an OSS message to SAP, to seek their assistance on the solution I followed to fix the issue. I have reverted back the changes and reproduced the issue for SAP guys to investigate further, at last they concluded me there is an external alias defined for /sap/bc/ui5_ui5/sap in transaction SICF in GP1/320, which contains a hard-coded client 220.
This is responsible for the fact that the services are redirected/opened in client 220
After removing the client hard-coded in system alaises under /sap/bc/ui5_ui5/ in transaction SICF, I have reverted back the change from "Alternative Logon Procedure" to "standard" in logon procedure of each service and tested, now the issue got resolved.
This could help someone to resolve the similar issue.
Thanks everyone
Regards,
Srujan

Gateway Configuration getting dropped

Hi,
I have configured the default gateway using route add default x.x.x.x on the solaris server. With route -f command, iam able to see the gateway configuration. But after a time span of 10-15 seconds, the gateway configuration is getting lost.
But the entry still exists in the /etc/defaultroute file.
IPv6 has been enabled on this machine. I disabled and tried, still the same problem exists.
Thanks in advance,
Sarat.

Hmm.
The command "route -f" flushes the routing table, or in other words, clears the routing table from all entries. So its no wonder if your default router disappears.
To list existing routes, run:
"netstat -nr"
The file where you store the defaultrouter is /etc/defaultrouter (note the trailing "r"), this file is only read at boot and not during normal system operation.
7/M.

Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

Itunes starts but fails to open due to audio configuration problem

Hi
I have been running itunes 7.1 quite successfully until today. Running on windows xp/toshiba laptop.
Problem occurs when i select itunes on desktop, itunes appears on task bar below, after a number of seconds the following error message appears "itunes cannot run because it has detected a problem with your audio configuration", once I click ok on this message itunes terminates.
No changes have been made to my audio configuration (to the best of my knowledge), i can run Windows Media Player and that works fine, so too real player.
I reinstalled itunes, but this did not resolve the problem. I also ran itunes from another logon on my laptop and that presented the same error. I checked all my audio settings in the control panel and also ran the diagnostics on each device and all appears to be fine.
Has anybody faced the same issue, and could anybody advise on any diagnistic tool that could assist in pinpointing the configuration problem?.
Thanks
Toshiba Satellite Windows XP Pro

Hi
Got it resolved, thanks for the prompt responses all!.
Resolved by removal current version of Quicktime thru the control panel (add/remove programs), and then reinstalled from the website.
Phew!
Toshiba Satellite Windows XP Pro

I keep getting this diologue box as I start up Firefox "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. ... what should I do exactly?

I keep getting the following dialogue box when I start Firefox " Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions." I am not sure how to find or change the profile directory. I have gone to the Options: General: Save files to ...box but it wont allow me to browse to another file and the box remains blank. ideas please!

See [[Could not initialize the browser security component]]
Continue here: [/questions/780717]

Why do I get an alert saying "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. How can I solve it??

The full alert is " Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behaviour when accessing security features."
This is just started three/four days ago. I need assistance quickly as I can't access any secure sites e.g bank accounts/homepage etc.

See [[Could not initialize the browser security component]]

Integration Directory(Configuration) Problem

Hi All,
I am facing one Probelm. I am working one the client through Citrix. I am not able to open Integration Directory(Configuration Problem) . In onsite it's working fine. Reming all other applications(Integartion Repository and SLD and Runtime work bench) are working fine.
if I open Integration Directory i am getting this messge.
<jnlp spec="1.0+" codebase="http://filp55.group.upm-kymmene.com:50100/dir">
    <information>
        <title>Integration Builder</title>
        <vendor>SAP AG</vendor>
        <homepage href="http://www.sap.com" />
        <description type="one-line">Directory</description>
        <description type="short">Directory</description>
        <description type="tooltip">Directory</description>
        <icon hight="64" href="start/graphics/sap6464.gif" type="splash" width="64" />
        <icon hight="32" href="start/graphics/SAP3232.gif" width="32" />
    </information>
    <security>
        <all-permissions />
    </security>
    <resources>
        <j2se version="1.4+" initial-heap-size="32m" max-heap-size="1024m" />
        <jar href="directory/aii_ibdir_client.jar" />
        <jar href="directory/aii_ibdir_core.jar" />
        <jar href="directory/aii_ibdir_sbeans.jar" />
        <jar href="directory/aii_ibdir_rb.jar" />
        <jar href="directory/aii_ib_client.jar" />
        <jar href="directory/aii_ib_core.jar" />
        <jar href="directory/aii_ib_sbeans.jar" />
        <jar href="directory/aii_ib_rb.jar" />
        <jar href="directory/aii_util_icons.jar" />
        <jar href="directory/aii_util_swing.jar" />
        <jar href="directory/aii_util_xml.jar" />
        <jar href="directory/aii_util_xsd.jar" />
        <jar href="directory/aii_utilxi_misc.jar" />
        <jar href="directory/aii_util_rb.jar" />
        <jar href="directory/clientaii_ib_sbeans.jar" />
        <jar href="directory/clientaii_ibdir_sbeans.jar" />
        <jar href="directory/frog.jar" />
        <jar href="directory/focus14.jar" />
        <jar href="directory/sapxmltoolkit.jar" />
        <jar href="directory/jta.jar" />
        <jar href="directory/ejb20.jar" />
        <jar href="directory/exception.jar" />
        <jar href="directory/logging.jar" />
        <jar href="directory/guidgenerator.jar" />
        <jar href="directory/jperflib.jar" />
        <jar href="directory/sapni.jar" />
        <jar href="directory/sapj2eeclient.jar" />
        <property name="sap.theme" value="Streamline" />
        <property name="jnlp.log.initialConfiguration" value="FILE, SIMPLE" />
    <property name="jnlp.com.sap.aii.ib.client.properties" value="com.sap.aii.ib.client., com.sap.aii.ib.core., com.sap.aii.util.xml., com.sap.aii.connect., com.sap.aii.repository.mapping.additionaltypes, com.sap.aii.docu., com.sap.aii.ibrep.core., com.sap.aii.ibdir.core.*" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.connect.landscape.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.cr.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.ib.client.content.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.repository.contextroot" value="rep" /><property name="jnlp.com.sap.aii.ib.client.login.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.directory.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.cr.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.rwb.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.directory.contextroot" value="dir" /><property name="jnlp.com.sap.aii.connect.rwb.contextroot" value="rwb" /><property name="jnlp.com.sap.aii.connect.landscape.httpsport" value="@com.sap.aii.server.httpsport.lcr@" /><property name="jnlp.com.sap.aii.connect.repository.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.repository.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.cr.httpsport" value="@com.sap.aii.server.httpsport.cr@" /><property name="jnlp.com.sap.aii.connect.repository.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.contextroot" value="run" /><property name="jnlp.com.sap.aii.connect.integrationserver.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.rwb.httpsport" value="@com.sap.aii.connect.rwb.httpsport@" /><property name="jnlp.com.sap.aii.connect.landscape.httpport" value="50000" /><property name="jnlp.com.sap.aii.docu.languages" value="null" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.initialheapsize" value="32m" /><property name="jnlp.com.sap.aii.util.xml.parserFactory" value="com.sap.engine.lib.jaxp.SAXParserFactoryImpl" /><property name="jnlp.com.sap.aii.connect.directory.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.httpsport" value="@com.sap.aii.server.httpsport.directory@" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpport" value="8001" /><property name="jnlp.com.sap.aii.connect.rwb.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.cr.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.landscape.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.SAPMYNAME" value="filp55_GTX_01" /><property name="jnlp.com.sap.aii.connect.rwb.httpport" value="50100" /><property name="jnlp.com.sap.aii.docu.url" value="null" /><property name="jnlp.com.sap.aii.ib.client.applicationname.directory" value="sap.com/com.sap.xi.directory/" /><property name="jnlp.com.sap.aii.util.xml.transformerFactory" value="com.sap.engine.lib.jaxp.TransformerFactoryImpl" /><property name="jnlp.com.sap.aii.ib.client.applicationname.repository" value="sap.com/com.sap.xi.repository/" /><property name="jnlp.com.sap.aii.ib.client.login.InitialContextFactory" value="com.sap.engine.services.jndi.InitialContextFactoryImpl" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpport" value="50100" /><property name="jnlp.client" value="true" /><property name="jnlp.com.sap.aii.connect.repository.httpsport" value="@com.sap.aii.server.httpsport.repository@" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.maxheapsize" value="1024m" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpsport" value="@com.sap.aii.connect.integrationserver.httpsport@" /><property name="jnlp.com.sap.aii.connect.integrationbuilder.startpage.url" value="rep/start/index.jsp" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpsport" value="@com.sap.aii.connect.integrationserver.r3.httpsport@" /><property name="jnlp.com.sap.aii.connect.rwb.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.util.xml.schemaValidator" value="com.sap.engine.lib.schema.validator.SchemaValidator" /><property name="jnlp.rc.release" value="7_00" /><property name="jnlp.rc.applname" value="DIRECTORY" /><property name="jnlp.rc.supportpackage" value="09" /><property name="jnlp.rc.synctime" value="${sync.time}" /></resources>
    <application-desc main-class="com.sap.aii.ibdir.gui.appl.ApplicationImpl">
        <argument>webstart</argument>
    </application-desc>
</jnlp>
Please help me on this..........
Thanks in Advacne.
Regards,
Chandra

Hello,
1)
May be the problem is a network connectivity issue. Do one thing copy the "cahce" folder from some other client PC(which has successfully opened IR and ID) to your client PC. The folder resides in "C:Documents and Settings<yourUserProfile>Application DataSunJavaDeploymentjavaws".
Copy "cache" folder to your client PC under the above path.
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
2) Go to http://filp55.group.upm-kymmene.com:50100/rep/
Click on Administration -> Java Web Start -> Java Web Start Administration ->
Try
1. Re-initialization (then try logging)
2. Re-initialization and force-signing (then try logging)
3. Delete lock (then try logging)
Do this for IR and ID tabs.
3) Check can be a firewall issue.
4) Check wether sufficient roles have been assigned -> Tcode -> SU01 -> roles tab. These roles need to be assigned to your username
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_XI_BPE_CONFIGURATOR_ABAP
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
<b>*******************Reward,if found useful</b>
Edited by: BVS on May 7, 2008 3:01 PM

Itunes can't run bc of audio configuration problem

Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
perhaps let's start with the following document:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
... but if no joy there, try this alternate technique for swapping out your QuickTime:
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Audio configuration problem in iTunes

I am running iTunes 7.1.1.5 (WinXP). When opening iTunes, I get an error message that there "are problems with your audio configuration." In iTunes support, I followed instructions to remove Quicktime then reinstall as standalone (without iTunes). Same problem persists. I will add that same problem occurred about a month ago, but that time the same steps of removing Quicktime, then reinstalling as standalone corrected the problem. Unfortunately, it recurred.

See if this helps:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
http://docs.info.apple.com/article.html?artnum=304424

Could not start the app due to a configuration problem - Launchpad issue

Hi,
When I try to launch a custom app from Fiori Launchpad I get an error could not start app due to configuration problem. Error 500- Internal Server Error.
App works correctly when I try to execute via URL http://XXX/sap/bc/ui5_ui5/sap/zmyfioriui5_v11.
Screenshot of Chrome debugging and lpd_cust attached.
It seems problem with ResolveLink but unable to conclude.
Any Suggestion how to proceed.
Thanks,
Mayank

Hi Mayank,
Few modifications :
For additional information field : ".component" at the end is not required.
Only keep : SAPUI5.Component=sap.ui.demo.myFiori
Check this screenshot :
Also, please don't keep Semantic object name and application alias as same name i.e. ymyfioriui5_v11. Its very confusing.
If above doesn't solve, please confirm below :
ZXXXLPD is your launchpad role in LPD_CUST tcode.
Please use TRANSACTIONAL instead of transactional (might be case sensitive)
Show your semantic object "ymyfioriui5_v11" created in /UI2/SEMOBJ
Regards,
Tejas

Can't run form from Form Builder 10g - Port configuration problem?

Hi,
I have installed the Database (10.2.0.1.0) and the Developer Suite (10.1.2.0.2) on two Linux machines (Red Hat Enterprise Linux ES 4 Basic).
If I enter the frmservlet-URL manually everything seems to be fine.
In one case I enter http://127.0.0.1:8890/forms/frmservlet, in the other http://127.0.0.1:8889/forms/frmservlet; in BOTH cases I get eventually a dark square and the status bar says "Applet oracle.forms.engine.Main started".
HOWEVER, if I create a simple form with Form Builder and click on the Button with the green traffic light ("Run Form"), the form runs only on the machine where frmservlet listens on port 8890.
On the other machine (frmservlet configured to listen on port 8889) Firefox pops up, the URL "http://127.0.0.1:32979/6dOrpwghCqnp8PhMT7KVT533m3IaArqFbPqPBOztZXWYSsNy" gets called, and nothing else happens. The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and it stays like this forever.
I assume this is a port configuration problem, but I don't have a clue where to start.
Any suggestions how I should proceed are greatly appreciated.
Thank you very much in advance!

Hi Frank,
Thank you for your reply.
I doublechecked my configuration.
In the dialog Edit --> Preferences --> Runtime the Application Server URL is set to "127.0.0.1:8889/forms/frmservlet".
However, when I attempt to run the form, the URL "http://127.0.0.1:33140/W2dwbV9eXS2fPkuKlxNhCxFWdEihwDviat2uV7ycrSotqwDN" gets called.
The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and that's it.
I wonder how the port number 33140 got selected. Interestingly, this time it is a different number; last time it was port 32979. In fact, the port number seems to change each time; I tried again and now it is 33189.
I will now try to set the port number for the frmservlet to 8890.
I choose Edit --> Preferences --> Runtime and set the application server URL to "127.0.0.1:8890/forms/frmservlet".
I stop the container, open /home/oracle/OraHome_1/j2ee/DevSuite/config/default-web-site.xml and change the port number to 8890:
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE web-site PUBLIC "Oracle Application Server 10g XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">



<web-site port="8890" protocol="http"
display-name="Oracle Developer Suite 10g instance of Oracle Containers for J2EE Web Site">

     
     
     <default-web-app application="default" name="defaultWebApp" root="/j2ee" />

<web-app application="forms" name="formsweb" root="/forms" />


<web-app application ="reports" name="web" root="/reports" />
<web-app application = "reports" name="demo" root="/repdemo" />
     
     <access-log path="../log/default-web-access.log" />
</web-site>
I restart the container, start Form Builder, connect to the database, and open my test form.
When attempting to run the form, the URL "http://127.0.0.1:33437/Pl0n3ky9vmU5z37A7ScBnQhsGwq3jwuzJpgTAKWPMOYIzT8K" gets called (again a new port number, apparently picked radomly within a certain range) and nothing happens: "Waiting for 127.0.0.1...".
However, when I enter the URL http://127.0.0.1:8890/forms/frmservlet I do (eventually, after confirming that I trust the certificate etc.) get a darc rectangle and the status message "Applet oracle.forms.engine.Main started", which tells me that my setup can't be that far off target.
Here is the output of netstat:
[root@localhost ~]# netstat -anp --tcp
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:32769 0.0.0.0:* LISTEN 2779/rpc.statd
tcp 0 0 0.0.0.0:23910 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 2759/portmap
tcp 0 0 0.0.0.0:1521 0.0.0.0:* LISTEN 4265/tnslsnr
tcp 0 0 0.0.0.0:113 0.0.0.0:* LISTEN 2983/xinetd
tcp 0 0 127.0.0.1:7830 0.0.0.0:* LISTEN 4429/spamd --port 7
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2928/cupsd
tcp 0 0 0.0.0.0:9240 0.0.0.0:* LISTEN 5269/java
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 3002/sendmail: acce
tcp 0 0 0.0.0.0:8890 0.0.0.0:* LISTEN 5269/java
tcp 0 0 0.0.0.0:32795 0.0.0.0:* LISTEN 4231/ora_d000_orcl
tcp 0 0 127.0.0.1:1521 127.0.0.1:32817 ESTABLISHED 4265/tnslsnr
tcp 0 0 127.0.0.1:32817 127.0.0.1:1521 ESTABLISHED 4209/ora_pmon_orcl
tcp 0 0 127.0.0.1:33425 127.0.0.1:1521 ESTABLISHED 5298/frmbld
tcp 0 0 127.0.0.1:1521 127.0.0.1:33425 ESTABLISHED 5311/oracleorcl
tcp 1 0 80.133.127.83:33485 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33484 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33494 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33520 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 80.133.127.83:33529 209.132.177.100:443 ESTABLISHED 4060/python
tcp 0 0 80.133.127.83:33528 209.132.177.100:443 ESTABLISHED 4060/python
tcp 1 0 80.133.127.83:33460 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 1 0 80.133.127.83:33470 209.132.177.100:443 CLOSE_WAIT 4060/python
tcp 0 0 :::22 :::* LISTEN 2968/sshd
tcp 0 0 ::ffff:127.0.0.1:33437 :::* LISTEN 5298/frmbld
tcp 697 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33439 CLOSE_WAIT -
tcp 348 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33440 CLOSE_WAIT -
[root@localhost ~]#
The question remains: Where do those port numbers come from?
Regards,
jme

Configuration problem with param or code problem

Hi,
Im new to this jsp. Currently, i have some some Q here. Im trying on the jsp-tutorial with
<%@ taglib prefix="my"
uri="./jsp2/jsp2-example-taglib.tld" %>
<HEAD>
<TITLE>Functions</TITLE>
</HEAD>
<BODY>
<H3>Add Numbers</H3>
<P>
<FORM action="./compute.jsp" method="GET">
X = <input type="text" name="x" value="${param["x"]}">
<BR>
Y = <input type="text" name="y" value="${param["y"]}">
<input type="submit" value="Add Numbers">
</FORM>
<P>
The sum is: ${my:add(param["x"],param["y"])}
</BODY>
</HTML>
inside the text box it appear the text with ${param[[/i], may i know is it a configuration problem?
Thx for reply

Probably yes it is a configuration problem.
You have a JSP2.0 container? (eg Tomcat 5)
If your web.xml starts with this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems,
Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
Replace it with this
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
That should fix it.
http://forum.java.sun.com/thread.jspa?threadID=629437&
tstart=0Sorry,
I already hav
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
originaly.

Probably Gateway configuration problem

Similar Messages

Maybe you are looking for