Probe-scsi-all not showing storedge

Need help on storedge 3310......
As I discussed an issue on 3310 .......
I tried probe-scsi-all to check the storage device........but its not showing it.............
any idea??

hi, guys:
about your question, at first , we need to ensure your 3310 configure .
1. do you map lun on 3310 with sccli ?
2. is the SCSI HBA adapter sun brand ?
if you sure it is mapped.the scsi adpate is sun , maybye the line or scsi apapter is defect. you need to replace it.
because of i have ever an question that similar with you . the OS can display disk, but the probe-scsi-all cannt display it .
for a long time , i investigation it , i have found out the cause, the HBA adpater isnt sun brand.
hopful it can help you !
best regards

Similar Messages

Probe-scsi-all can detect 3511 storage but not format

Hi,
I have an E2900 server connected with a Sun StorEdge 3511 by a dual FC card.I can detect the 3511 drives from probe-scsi-all but not from format.I am using solaris 9 O/S.
Any help or suggestions would be of great help.
regards
Moin

ANDREW
output of
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
N0.IB6 PCI_I/O_Boa connected configured ok
N0.IB6::pci0 io connected configured ok
N0.IB6::pci1 io connected configured ok
N0.IB6::pci2 io connected configured ok
N0.IB6::pci3 io connected configured ok
N0.SB0 CPU_V3 connected configured ok
N0.SB0::cpu0 cpu connected configured ok
N0.SB0::cpu1 cpu connected configured ok
N0.SB0::cpu2 cpu connected configured ok
N0.SB0::cpu3 cpu connected configured ok
N0.SB0::memory memory connected configured ok
N0.SB2 unknown empty unconfigured unknown
N0.SB4 unknown empty unconfigured unknown
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 CD-ROM connected configured unknown
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t1d0 disk connected configured unknown
c1::rmt/0 tape connected configured unknown
c2 scsi-bus connected configured unknown
c2::dsk/c2t0d0 disk connected configured unknown
c2::dsk/c2t0d1 disk connected configured unknown
c2::dsk/c2t0d2 disk connected configured unknown
c2::dsk/c2t0d3 disk connected configured unknown
c2::dsk/c2t0d4 disk connected configured unknown
c2::dsk/c2t0d5 disk connected configured unknown
c3 scsi-bus connected configured unknown
c3::dsk/c3t0d0 disk connected configured unknown
c3::dsk/c3t1d0 disk connected configured unknown
c3::dsk/c3t2d0 disk connected configured unknown
c3::dsk/c3t3d0 disk connected configured unknown
c3::dsk/c3t4d0 disk connected configured unknown
c3::dsk/c3t5d0 disk connected configured unknown
c3::dsk/c3t8d0 disk connected configured unknown
c3::dsk/c3t9d0 disk connected configured unknown
c3::dsk/c3t10d0 disk connected configured unknown
c3::dsk/c3t11d0 disk connected configured unknown
c3::dsk/c3t12d0 disk connected configured unknown
c3::dsk/c3t13d0 disk connected configured unknown
c3::es/ses1 processor connected configured unknown
c4 scsi-bus connected unconfigured unknown
c5 fc-private connected configured unknown
c5::226000c0ffaa763c ESI connected configured unknown
c6 fc connected unconfigured unknown
c7 scsi-bus connected configured unknown
c7::dsk/c7t0d0 disk connected configured unknown
c7::dsk/c7t0d1 disk connected configured unknown
c7::dsk/c7t0d2 disk connected configured unknown
c7::dsk/c7t0d3 disk connected configured unknown
c7::dsk/c7t0d4 disk connected configured unknown
c7::dsk/c7t0d5 disk connected configured unknown
c8 scsi-bus connected configured unknown
c8::dsk/c8t0d0 disk connected configured unknown
c8::dsk/c8t1d0 disk connected configured unknown
c8::dsk/c8t2d0 disk connected configured unknown
c8::dsk/c8t3d0 disk connected configured unknown
c8::dsk/c8t4d0 disk connected configured unknown
c8::dsk/c8t5d0 disk connected configured unknown
c8::dsk/c8t8d0 disk connected configured unknown
c8::dsk/c8t9d0 disk connected configured unknown
c8::dsk/c8t10d0 disk connected configured unknown
c8::dsk/c8t11d0 disk connected configured unknown
c8::dsk/c8t12d0 disk connected configured unknown
c8::dsk/c8t13d0 disk connected configured unknown
c8::es/ses2 processor connected configured unknown
c9 scsi-bus connected configured unknown
c9::dsk/c9t8d0 disk connected configured unknown
c9::dsk/c9t9d0 disk connected configured unknown
c9::dsk/c9t10d0 disk connected configured unknown
c9::dsk/c9t11d0 disk connected configured unknown
c9::dsk/c9t12d0 disk connected configured unknown
c9::dsk/c9t13d0 disk connected configured unknown
c10 scsi-bus connected configured unknown
c10::dsk/c10t0d0 disk connected configured unknown
c10::dsk/c10t1d0 disk connected configured unknown
c10::dsk/c10t2d0 disk connected configured unknown
c10::dsk/c10t3d0 disk connected configured unknown
c10::dsk/c10t4d0 disk connected configured unknown
c10::dsk/c10t5d0 disk connected configured unknown
c10::dsk/c10t8d0 disk connected configured unknown
c10::dsk/c10t9d0 disk connected configured unknown
c10::dsk/c10t10d0 disk connected configured unknown
c10::dsk/c10t11d0 disk connected configured unknown
c10::dsk/c10t12d0 disk connected configured unknown
c10::dsk/c10t13d0 disk connected configured unknown
c10::es/ses3 processor connected configured unknown
c11 scsi-bus connected configured unknown
c11::dsk/c11t8d0 disk connected configured unknown
c11::dsk/c11t9d0 disk connected configured unknown
c11::dsk/c11t10d0 disk connected configured unknown
c11::dsk/c11t11d0 disk connected configured unknown
c11::dsk/c11t12d0 disk connected configured unknown
c11::dsk/c11t13d0 disk connected configured unknown
c11::es/ses4 processor connected configured unknown
c12 scsi-bus connected configured unknown
c12::dsk/c12t0d0 disk connected configured unknown
c12::dsk/c12t1d0 disk connected configured unknown
c12::dsk/c12t2d0 disk connected configured unknown
c12::dsk/c12t3d0 disk connected configured unknown
c12::dsk/c12t4d0 disk connected configured unknown
c12::dsk/c12t5d0 disk connected configured unknown
c12::dsk/c12t8d0 disk connected configured unknown
c12::dsk/c12t9d0 disk connected configured unknown
c12::dsk/c12t10d0 disk connected configured unknown
c12::dsk/c12t11d0 disk connected configured unknown
c12::dsk/c12t12d0 disk connected configured unknown
c12::dsk/c12t13d0 disk connected configured unknown
c12::es/ses5 processor connected configured unknown

Probe-scsi-all sees something, but OS does not

How about a more specific question this time?
I'm seeing something that may be relevant in probe-scsi-all:
/pci@1d,700000/SUNW,qlc@1
*************************** Local Loop Devices ***************************
Adapter loopId - 0
Device AL-PA a7 loopId 28 Hard-addr 28 Port WWN 216000c0ff89203a
Lun 0 DISK SUN StorEdge 3511 411I
/pci@1c,600000/SUNW,qlc@1
*************************** Local Loop Devices ***************************
Adapter loopId - 0
Device AL-PA a5 loopId 2a Hard-addr 2a Port WWN 226000c0ffa9203a
Lun 0 DISK SUN StorEdge 3511 411I
...but if I run format, I don't see any 3511-related devices, even if I:
/usr/sbin/drvconfig
/usr/sbin/devlinks
/usr/sbin/disks # or /usr/sbin/tapes for tapes
/usr/sbin/tapes
/usr/ucb/ucblinks # Compatibility links
What do I need to do to make some devices visible on a V440 from a series of 4 3511's?
See also the post I'm about to see about serial communications though.

Any further suggestions? Thanks much for taking an interest in this.
esmft1-dcs DCS) cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 CD-ROM connected configured unknown
c1 scsi-bus connected configured unknown
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t2d0 disk connected configured unknown
c1::dsk/c1t3d0 disk connected configured unknown
c2 scsi-bus connected unconfigured unknown
usb0/1 unknown empty unconfigured ok
usb0/2 unknown empty unconfigured ok
usb1/1 unknown empty unconfigured ok
usb1/2 unknown empty unconfigured ok

Probe-scsi-all failed

hi all :
I have 2 v440 (solaris 9) and 2 Sun StorEdge 3320 and I can see the disks from format command but not from probe-scsi-all.
When running probe-scsi-all , it keep giving the following message ::
Error : LSI 1030 : timeout waiting for interrupts status
Could not set initiator ID
MPT firmware, FaultCode : 8112
Thanks for any reply !

I have the same errors.
I created a mirrored root drive on my v440 and I do not believe it is working. The Sun manual said I could boot off the mirrored drive, but that failed.
boot disk2
disk2 /pci@1f,700000/scsi@2/disk@2,0
Any suggestions?
Thanks
Jun 7 15:18:54 kristina mpt0 Firmware version v1.3.27.0 (IM/IME)
Jun 7 15:19:36 kristina mpt1 Firmware version v1.3.27.0 (IM/IME)
# raidctl
RAID Volume RAID RAID Disk
Volume Type Status Disk Status
c1t0d0 IM RESYNCING c1t0d0 OK
c1t2d0 OK
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@0,0
1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@1,0
2. c1t3d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@3,0

Format cannot see disks but probe-scsi-all can

Hi Folks,
I have attached a Storedge with five disks to an external SCSI card and can see all the disks via the probe-scsi-all command at the OBP. However when I do a boot -r I would expect to see all the disks with the format utility but I only see the internal disks.
Has anyone had this problem? If so am I missing something obvious?
Thanks in advance.

Hi
check the scsi-initiator-id in printenv on OK prompt .If it is 7 change to 6 and check whether u can see the hard disks through format command. and also u can run these three commands on root prompt to detect the hard disks
1) # drvconfig
2)# disks
3)# devlinks
Best Luck
Regards

CSS (some, not all) not showing up in browser, but fine in DW. Plus other desperate issues....

I would really appreciate any and all help I can get to solve these problems as I'm new to CSS/HTML (completely new) and have been attempting to code my design just well enough to get it uploaded and working as a site. Once I can atleast achieve this feat, I plan on completely converting to CSS. But for now, I need to get the site working and I really didn't want to come and bother all of you on here with my problems and have been procrastinating posting on here for absolutely ages now....but since I can't figure all of the messy-uppy ness going on on my own, I beg forgiveness for any of your time wasted on my problems .
Okay, so the "main" issue here is that I can see some(some, not all) CSS on DW, but I see NONE whatsoever when I go to preview in browser, same after uploading. I do have all of the files uploaded and placed in the correct directories, including the stylesheet, and images folder. But, nope, nada. Now, I did think this was a root/directory problem, maybe the url's weren't pointing to the right directories. I checked and attempted to fix this several times and any changes made no difference. Also, uploaded to the root of my site, where all files and folders are where they should be, yet no change. I am utterly clueless as to what is going on here....
Second: Padding, or margins added through CSS for the divs is simply not working in DW or otherwise. I have padding placed on all of the content type areas with writing/content in them and despite the fact that the changes to the font/text formatting I've made show up, the padding does not. This is only in DW since no CSS whatsoever is showing out of DW anyways. I would like to know how to get the padding and the formatting, just all of the CSS in general to actually show up in browser/when uploaded.
Third: The next issue is also confusing, and this only occured after I made the page into a template and uploaded the home.htm page I created from it to my site. For some reason, the image called "../images/aurora2_14_content_marg.gif". Is appearing at the very top of the page for no reason at all. I don't understand why it is there, or how it even got up there in the first place.
Fourth: This was actually next on my list of things to figure out once I've gotten all of the above issues taken care of but since I'm still drawing a blank after 2+ weeks on how to get this done in a way that will work I guess it couldn't hurt to ask on here and get some expertise on the matter. The issue is that I have a repeating background (images/bg.png) that I want stretching downwards as I add content to the page. I have this placed as the main background for the entire site as you will be able to see in a moment through my code/site. Now, the place I want this to start is from where the aforementioned image (../images/aurora2_14_content_marg.gif) stops. However, I want the content to actually start from 20 pixels or so from the top of that very image. I want to try and achieve this through the use of margins but since the margins and padding are not showing up I hve been unable to experiment with it enough to figure out any other way to achieve this. Any suggestions on how to achieve this would be much appreciated.
Fifth (yes, unfortunately we're still going): As you may be able to see through the design I have two seperate areas for the main content and the navigation and other such items to be placed. To clarify, the content will be placed(through the use of expandable content boxes, once I figure out how to work that) beginning at the aforementioned image/td/div (../images/aurora2_14_content_marg.gif) with a bit of padding or margin from the top and sides (too pull the content towardsthe center of the site rather than all over from left to right like it is appearing now). The navigation etc will be placed where the long cyan area is under the search bar. For both of these, I cannot figure out how to split my one background image and also the content_marg.gif image into the two divs/or whatever else would work to split their contents from eachother. I think that seperating them into 2 divs with padding from the sides and eachother and seperate top paddings (I want the navigation to begin more near the top of the page than the content). The issue here is, I cannot figure out how to do this.
Any and all suggestions would be greatly appreciated. Also, any tips on how to achieve the code for the solutions provided would also be very much appreciated, as I am only just starting out coding.
The site/page:
http://aurora.comeze.com/home.htm
The stylesheet (style.css):
http://aurora.comeze.com/style.css
Like I mentioned above, all of this except the padding shows up in DW. Whereas, none of this shows up at all in browser view, or through the site.

Summary of issues #1 through #5:
Code errors galore:
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Faurora.comeze.com%2Fhome.htm
Photoshop generated HTML.
20th century table based layout with endless spacer gifs.
START OVER
From Tables to CSS Web Design Part 1 -
http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt1.html
From Tables to CSS Web Design Part 2 -
http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt2.html
=========================
DW Starter Pages (CSS Layouts)
http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html
=========================
Taking a Fireworks (or Photoshop) comp to a CSS Layout in DW
Part 1 - Initial Design
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
Part 2 - Markup preparation
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html
Part 3 - Layout and CSS
http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html
========================
HTML & CSS Tutorials - http://w3schools.com/
Learn CSS positioning in 10 Steps
http://www.barelyfitz.com/screencast/html-training/css/positioning/
How to Develop with CSS?
http://phrogz.net/css/HowToDevelopWithCSS.html
========================
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Best of luck,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Objects, Textures & Effects all not showing up properly...

Hello, I've been trying to apply objects, effects, and textures, and they're all showing up in the canvas, and when I export, as 'all white'. I had taken a screenshot, but don't see how to import it here. But for example, under the Objects tab, I applied the 'Eccentric' 'effect', and instead of being this cool purple effect underneath my name, it's just pure white! And this is the same for every effect, object, texture I try to apply...thanks!

and when I export, as 'all white'.
Not sure what you mean by this, but you might try trashing the Live Type preferences files:
Quit Live Type.
Click the Finder icon in the Dock, make it a list view instead of icon view.
Click on your Home Directory.
Click on Library
click on Preferences
Drag the file named "com.apple.LiveType.plist" to the Trash
Open Live Type.

Union all not showing all columns of 2 Excel files

Hi
File Excel1.xls has 2 columns: first name and last name.
File Excel2.xls has 3 columns: first name, last name and middle name.
Why does "Union all" show only first and last names? I thought that it shows also the middle name. I see it by double clicking box
Union all. In box Union All Transformation Editor
I expect such a line:
Output column name: middle name
Union All Input 1: <#ignore>
Union All Input 2: middle name
Thanks!
gec

Hi,
I think you need to select <ignore> in union all input1 and select middlename in unionall input 2 and Type Middlename in Output Coulmn Name.
As Shown Below.
Hope this answer your question.
If it does mark this as answer please.
Regards
Kaushal

Devfsadm not showing the external storage disk but able to see from OK

Hi,
I have an external storage disk.
Solaris 9 is running on E220R Sun server. I am able to view this disk from the OK prompt using probe-scsi-all.
I have installed SFS packages for V9 and the patches required also. MPXIO is also enabled on this server. But am not able to view this disk when i scan using devfsadm command from the os.
The HBAs are Qlogic 23xx. The driver used is 4.13.x
Please let me know if am missing anything.
Thanks
- Sarat.

can u paste yr cfgadm -al output
try configuring the controller first , if it is unconfigure
also
luxadm -e port # to both cables are connected
luxadm probe # to see the luns
regards

Sun v240 dvd not showing in probe-scsi

hi
error message is
cannt open boot device
when i write boot cdrom

The optical drives in V210/V240 systems are IDE drives.
You won't see them via probe-scsi.
You will need to do a probe-ide to see them.
As for your boot error, try replacing the media with known bootable commercially created disks.
If that doesn't work, then replace the optical drive.

Loops not showing up at all in Garageband.. but are on computer...

Hey,
My loops are not showing up... however I don't have my CDs with me at Uni. However, I disovered by using Spotlight that the loops are actually on the computer in a folder called "Apple Loops for Garageband". They are in my user library and the garage band preferences are set to "share loops with this user only" or whatever the option is called - suggesting that it is correct for this folder to be in the User libray and not the main library.
However I don't even have grayed out samples - they just are not there at all.
I tried dragging one or two from the folder to Garageband manually and they copied over fine and are now in the sample library... however it won't let me copy them over all in one go for some reason...??
I have a lot of samples so don't want to do them one by one... so before I resort to that - any advice...?? Whats going on?
Thanks in advance.

hey, yea i've been having the same problem, just bought this new imac, and none of the audio loops are working (they all show up gray). i actully spent the time, clicking and draging each one individually, but guess what? not all the loops are there!!! i'm sooo cofused, if anyone has figured this out, that would be extremely helpful thanks!!!!

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

When I create a playlist and sync it to my iPhone not all of the playlist transfers over. All of the songs are there and are playable they just do not show up on the playlist.

When I create a playlist and sync it to my iPhone not all of the songs on the playlist transfer over. All of the songs are there and are playable they just do not show up on the playlist. For example, in itunes on my computer a playlist has over 100 songs, but when I sync my phone, my iphone only shows 60 songs. I can go into my phone and add the missing songs to the playlist, but the next time I sync my phone the songs are gone again.

Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
Here's that thread...
https://discussions.apple.com/message/16903613#16903613

My iphone 4S shows up on my computer but does not show up in itunes devices. I have all security

I just got an iPhone 4S and am unable to get it to show up as a device in iTunes.
I previously backed up my old iPhone on my Windows 7 PC. When I connect my 4S to the PC it is recognized by the PC but does not show up as a device in iTunes.
I have turned off all virus protection software & have tried uninstalling iTunes and all associated Apple software. I reinstalled all Apple software with no results in my 4S showing up as a device in iTunes.
Any help is greatly appreciated.

Try restarting the AMDS > iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

HT1296 When I send a message on MESSAGES using my iPad2, they do not show up on my iPhone or my MacBook Mountain Lion messages. Did I miss a setting on any of the devices as I thought iCloud took care of syncing all of my devices

When I send a message on MESSAGES using my iPad2, they do not show up on my iPhone or my MacBook Mountain Lion messages. Did I miss a setting on any of the devices as I thought iCloud took care of syncing all of my devices

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
http://www.macobserver.com/tmo/article/messages_why_your_chats_dont_show_across_ cross-device/

Probe-scsi-all not showing storedge

Similar Messages

Maybe you are looking for