Probelm in creating R/3 source system in BW 3.5!

Hi,
steps i did for the creation of source system in BW are as follows!
1) crated RFC destinations in each of the system (BW3.5 and R/3 4.7 IDES)
2) created logical systems in each of the systems and assigned the client to the respective logical systems
3) created back ground user in BW (Back ground user was already there in BW side, namely ALEREMOTE)
4) and in RSA1 screen when i attempt to create source system, it is asking for RFC destination and Logical system which i did . and after that, i am seeing neither the source name created nor any other next screen .
am i missing some thing here?
do suggest me the steps furthur for creating source system
Thanks,
Ravi

Hi Dinesh,
Thanks for ur reply!
now i did just as u told to me to do in automatic creation of source system!
i am getting the following info on the pop up window :
BW LS1 is already known T90CLNT090 in the source system
do you want to delete this connection in source system?
connection is restored after it has been deleted successfully
which option shud i use delete or dont delete?
if i am selecting "don`t delete" option iam getting the message as source system cannot be created with any of the proposed connections!
and i donno what wud be the effect if i select delete option!
pls suggest me on this !

Similar Messages

About creating a new source system on BW pointing to an Oracle database

hi friends
i m facing problems when i
creating a new source system on BW in AIX pointing to an Oracle database, our bw oracle use 10idatabase ,and we want to connet to 9idatabase(Windows) to get data for BW
(1.)     in /oracle/P01/102_64/network/admin tnsnames.ora I hava add
SJPT =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 68.16.211.177)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = SJPT)
(2) and in etc/hosts I hava add
68.16.211.177 SJPT
(3) in p01adm> tnsping SJPT it is OK
(4)but when i
in BW RSA1 DATA SOURCE
create db connect:
DBMS: ORA
USER NAME: SAP
DB PASSWORD: SAP
[email protected]
i t give me the error message :
ORA-12154: TNS:could not resolve the connect identifier
please help me

HI,my trans.log file is
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 13.11.2007 - 10:16:48
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc     ,00000] Tue Nov 13 10:16:48 2007                              81 0.000081
4 ETW000 [dev trc     ,00000] db_con_init called                                    29 0.000110
4 ETW000 [dev trc     ,00000] create_con (con_name=R/3)                             50 0.000160
4 ETW000 [dev trc     ,00000] Loading DB library '/usr/sap/P01/SYS/exe/run/dboraslib.o' ...
4 ETW000                                                                              43 0.000203
4 ETW000 [dev trc     ,00000] load shared library (/usr/sap/P01/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000                                                                           13346 0.013549
4 ETW000 [dev trc     ,00000] Library '/usr/sap/P01/SYS/exe/run/dboraslib.o' loaded
4 ETW000                                                                              32 0.013581
4 ETW000 [dev trc     ,00000] function DbSlExpFuns loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000                                                                              35 0.013616
4 ETW000 [dev trc     ,00000] Version of '/usr/sap/P01/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.46)
4 ETW000                                                                              53 0.013669
4 ETW000 [dev trc     ,00000] function dsql_db_init loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000                                                                              34 0.013703
4 ETW000 [dev trc     ,00000] function dbdd_exp_funs loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000                                                                              53 0.013756
4 ETW000 [dev trc     ,00000] New connection 0 created                              23 0.013779
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              39 0.013818
4 ETW000 [dev trc     ,00000] db_con_connect (con_name=R/3)                         45 0.013863
4 ETW000 [dev trc     ,00000] find_con_by_name found the following connection for reuse:
4 ETW000                                                                              32 0.013895
4 ETW000 [dev trc     ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000                                                                              37 0.013932
4 ETW000 [dev trc     ,00000] Got LIBPATH=/usr/lib:/lib:/usr/sap/P01/SYS/exe/run:/oracle/P01/102_64/lib from environment
4 ETW000                                                                             325 0.014257
4 ETW000 [dev trc     ,00000] -->oci_initialize (con_hdl=0)                         47 0.014304
4 ETW000 [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8          3234 0.017538
4 ETW000 [dev trc     ,00000] Logon as OPS$-user to get SAPSR3's password           28 0.017566
4 ETW000 [dev trc     ,00000] Connecting as /@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000                                                                              34 0.017600
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              35 0.017635
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000                                                                              36 0.017671
4 ETW000 [dev trc     ,00000] Allocating service context handle for con_hdl=0       37 0.017708
4 ETW000 [dev trc     ,00000] Allocating server context handle                      24 0.017732
4 ETW000 [dev trc     ,00000] Attaching to DB Server P01 (con_hdl=0,svchp=0x110f94398,svrhp=0x110fa6158)
4 ETW000                                                                              72 0.017804
4 ETW000 [dev trc     ,00000] Assigning server context 0x110fa6158 to service context 0x110f94398
4 ETW000                                                                           36191 0.053995
4 ETW000 [dev trc     ,00000] Allocating user session handle                        73 0.054068
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000                                                                              43 0.054111
4 ETW000 [dev trc     ,00000] Assigning user session 0x110f937a0 to service context 0x110f94398
4 ETW000                                                                           10613 0.064724
4 ETW000 [dev trc     ,00000] Now '/@P01' is connected (con_hdl 0, nls_hdl 0).
4 ETW000                                                                             964 0.065688
4 ETW000 [dbsloci.    ,00000] *** ERROR => ORA-942 when accessing table SAPUSER
4 ETW000                                                                            1183 0.066871
4 ETW000 [dev trc     ,00000] Disconnecting from connection 0 ...                   73 0.066944
4 ETW000 [dev trc     ,00000] Rolling back transaction ...                          28 0.066972
4 ETW000 [dev trc     ,00000] Closing user session (con_hdl=0,svchp=0x110f94398,usrhp=0x110f937a0)
4 ETW000                                                                             146 0.067118
4 ETW000 [dev trc     ,00000] Now I'm disconnected from ORACLE                     409 0.067527
4 ETW000 [dev trc     ,00000] Try to connect with default password                  23 0.067550
4 ETW000 [dev trc     ,00000] Connecting as SAPSR3/<pwd>@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000                                                                              34 0.067584
4 ETW000 [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
4 ETW000                                                                              36 0.067620
4 ETW000 [dev trc     ,00000]    0 UTF8                                                      1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000                                                                              36 0.067656
4 ETW000 [dev trc     ,00000] Assigning username to user session 0x110f937a0        22 0.067678
4 ETW000 [dev trc     ,00000] Assigning password to user session 0x110f937a0        41 0.067719
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000                                                                              37 0.067756
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000                                                                           33690 0.101446
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              36 0.101482
4 ETW000 [dblink      ,00431] ***LOG BY2=>sql error 1017   performing CON [dblink#3 @ 431]
4 ETW000                                                                             122 0.101604
4 ETW000 [dblink      ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 431]
4 ETW000                                                                              34 0.101638
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'P01'"

RFC destination BW could not be created in the source system R3073

I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
RFC destination BW could not be created in the source system message number R3073
Why is this happening? The connection tests just fine.
I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
Any ideas?
thanks

Hi,
I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
Create your BWDEV RFCDEST manually in your BWQA .
Perform test and authorization test within SM59 from both sys.
When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
hope this helps...
Olivier.

How to create a DB Source system in BW

Hi Guys,
Can anybody explain me how to create DB Connect source system in BW.
Points will be awarded.
Thanks,
Chinna

Hi Chinna,
Below are the steps to be followed for the SS creation in BW :
Prerequisites :
1.System Number
2.System IP address
3.ALEOLTP like userid and password this is the RFC user ID in the R/3 system. Usually set to communication - must be set to dialog in the R/3 Source System for the duration of the create/restore connection process. Note: the password must be in capital letters.(If all instances are in unicode system)
1.At the time of making the connection, the R/3 source system will need to be opened for client independent configuration.
2.If it is a connection create or restore, the personal userid of the person doing the work must have SM59 access.
Follow the naming convention which is being used in your system.
1.     Logon to r/3 source system using the r/3 RFC userid to check that the userid has been set to dialog user. It is mandatory that the r/3 source system userid be setup temporarily as dialog to create the connection. If not contact the requester to have this done before continuing with the next step.
Note: When re-checking to ensure that the r/3 userid is a dialog user, you may get prompted for new password. Change password, and make a note of the new password. Use this new password in the steps that follow for the r/3 RFC userid.
2.     Logon to BW system using your own userid.
3.     Enter transaction RSA1, In Source Systems, right-click on Source Systems as shown below to create new connection.
4.     In the screen select the appropriate Source System connection type. Suppose your are creating connection for r/3 instance, so in this case we pick the very first option.
5.     A popup window will get displayed asking for the necessary information. To fill in the appropriate information in the that screen you need the following information concerning the r/3 source system.
     IP address (Application Server) &
     System Number
Get this information for the r/3 source system from the SAP Logon Pad.
6.     If Parameters have been incorrectly entered then the following error message will appear : Check connection parameters for the source system.
7.     Re-check and re-enter correctly. If all is good then You will see the following prompt : Please log on as an administrator in the following screen.Click green check to continue.
8.     This will bring you to the r/3 logon screen. Logon using the r/3 RFC id. Once logged on click Check in Check RFC destination dialog box.
9. Consider the r/3 RFC destination screen.
10. Check to make sure that BW system information (Userid, IP address, System Number etc) is correctly showing in the Technical Settings and Logon/Security tabs. Next do the following,
     Step 1: Enter password for the BW RFC userid id.
     Step 2: Save Settings
     Step 3: From Test Menu , click on authorization. Ensure there are no errors
     Step 4: Back out of screen.
11.     System may ask you to logon as administrator again. Logon as in Step 10. This time click on Use in Check RFC destination dialog box.
Connection related processing will start up at this time, and continue for a little while (can be a couple minutes or more).
12.     Subsequently, a dialog box will show up on the screen.
13. Pick option, Replicate As Well.
Replication and activation of data sources & transfer structures will begin.
With the completion of this step you will have successfully established this source system connection. To confirm, right-click on the new source system entry and click on check
14. If the connection is good, the following message with the source system ID will display at bottom left corner of screen : Source system connection is Ok.
Hope this will be helpful to you.
Thanks & Regards,
suchitra.V

Error while Creating Flat file Source System

Hi Friends,
The message "No entry for BW_USER in table RSADMIN available" is shown when I try to create a Source System for File System(Manual Metadata, Data using File Interface). Could somebody help me please.
Thanks in advance.
Hanuma Reddy

Hi,
I have solved this problem from SDN by seeing below reply to some others question. Thanks Ajay.
I think this problem comes if you have used more than one client in BW (for example if you logged on to 000 and ran admin workbench initially after installation, and then if you prepared another client for use as BW client).
Look at OSS note 410952, it mentions of the same error. The fix as mentioned in the note is as follows
Symptom
You receive the error message when trying to connect a source system to the Admininistrator Workbench:
"No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
Additional key words
RSAR059, APO, RSADMINA
Cause and prerequisites
In table RSADMINA, the BW user is not maintained for ALE.
Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.

RFC destination BW could not be created in the source system

Hi,
Recently I installed BI 7.0 on Win 2003 and try to create a SAP system in RSA1.
I try to connect R/3 system (on UNIX) and getting RFC connection error u201CRFC user logon failed. Check the connection.u201D & u201CRFC destination BW could not be created in the source systemu201D. However, I test the connection and it is working fine.
Please suggest the solution.
Regards,
Rajesh

Rajesh,
Answer is very simple. I did get same kind of problem. It is very simple answer depending on your R3 version.
Use password all capital letters. Don't include any small letter at all. unlock your user id and change password to capital letter. BW doesn't like small and capital letter mix. this bug is fixed in ECC 6.0
<removed_by_moderator>
*Do not ask for points
Read the "Rules of Engagement"
Regards
RK
Edited by: Juan Reyes on May 21, 2009 9:30 AM

Steps to Create R/3 Source system in BW

I need to create a source system for extracting data from R/3
Please let me know the steps for the same. Any document for the same would be appreciable
The BW Client is 100
Logical client is 100

Hi
Navigate to Source System tree
Here you need to create new destination by entering Target Computer, System Id, System Number, Back ground user & password.
In the RFC Destination screen, enter Target Host, System Number, Port Number,
If you want to make "Trusted" system,check thet check that check box.
This is the way to create to source system in BI7.0
Don't forget to test the connection.
Regards
Saravanan.ar

Error when creating R/3 source system in BW3.5

I HAVE CREATED SOURCE SYTEM FOR R/3 TO PERFORM EXTRACTION IN BW-3.5.
AFTER I DID ALL THE BASIC SETTING LIKE CREATING LOGICAL SYSTEM AND ASSIGNING CLIENT AND CREATING RFC DISTINATIONS.
I TRY TO CREATE SOURCE SYSTEM BY RIGHT CLICKING ON SOURCE SYSTEM ROOT NODE AND SELECTED THE OPTION SAP SYSTEM FROM RELEASE 3.0D(MANUAL CREATION) AND ENTERED
RFC DISTINATION : (LOGICAL SYSTEM ID OF R/3)
LOGICAL SYSTEM NAME: (LOGICAL SYSTEM ID OF R/3)
SOURCE SYSTEM NAME: (R/3 SOURCE SYSTEM)
ERROR MESSAGE -- NO:447
BASIC TYPE ZSBA005 DOES NOT EXITS
ACTIVATION OF SOURCE SYSTEM FAILED
PLEASE HELP ME IN THIS ISSUE..
CHEERS
AMAR.

Hi,
Kindly do not type completely in CAPS.
Take a look at SAP Note 140276 to correct errors in source system assignment.
BR/
Mathew.

Problem While creating DB connect source system to BW

Hi Guys,
While Creating DB sourc system in BW.The source system was not creating.
Sorcesystem-Create- selected the DB source system
Logical system: TAXIA03TST
Description:For Testing
DBMS:ORA
Username:
Pass word:
Given the ORA user name and password
Connection info:TAXIA03TST
After that it was saved.
After that it was going to the pop up screen Sytem log ,correct ,cancel
whe i select the correct,the source system was not created.
Can anybody help me out in creating the DB dource system.As it was very urgent.
points will be awarded.
Thanks,
Venkat

Hi,
This may help you to some extent:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40
Please check the SAP Note 339092
regards,
Pruthvi R

Problem in creating DB Connect source system

Hi All,
Iam creating a DB Connect source system to a legacy ORACLE database.
Since my legacy database is ORACLE, I have given the TNS name as the connection info.
The source system got created successfully. but the problem is, upon clicking on 'datasource overview', the system has to generate an application component hierarchy. But it is showing the same application component hierarchy which is there for flat file source system, and iam not getting the option to "select Database Tables" where i can create and edit the datasource.
please help me out.
help would be appreciable and carry reward.

Hi,
Create source system first.
you have to select the option "Database system (Data and meta data using SAP DB Connect)".
Now enter the database specific information.
DBMS:
Username:
Pwd:
Conn. Info:
Conn. Info should be the TNS name if it is oracle database.
after giving the relevent information save it, and come back. Source system will be created.
Now right click on source system and select the option " select Database Tables". it will show you the list of tables or views on that database.
select the table/view on which you need to create data source, and click on "edit datasource" there you can generate datasource.
after creating the datasource, replicate it... adn proceed.
any doubts plz ask me.
Message was edited by: suman dara

How to create R/3 source system in biw

hi
i hv define logical system assined cllient to logical sytem creating the
RFC destination but after remote login and all process complete it is not showing the new R/3 source system in source system. why it happening please help me?

Hi Vivek,
Try create like this... i think it will helps u out...
GO TO SALE DISPLAY IMG, EXPAND ALE, EXPAND SENDING & RCIVINING SYSTEM, LOGICAL SYSTEMS, DEFINE LOGICAL SYSTEM, EXECUTE, ASSIGN CLIENT TO LS, CONVERT LS NAMES IN APPLICATION TABLES.
ASSIGN CLIENT TO LS                                       DEFINE LS
CHANGE VIEW CLIENTS                                  NEW ENTRIES
SELECT 800 SHN 800                                             SHN 800, LS FOR 800
DETAILS
     CLIENT 800
      LS    SHN 800
SAME
SAP R/3 CLIENT 800
               LS SHN 800
2. LOGON TO BW SERVER.
SALE, EXPAND ALE SEND &RECIVING SYSTEM, EXPAND LOGICAL SYSTEM, ASSIGN CLIENT TO LS.
SAP BW CLIENT 800, LS L100
3. CREATE RFC DESTINATION IN BW
   EXPAND ALE, SYSTEMS IN NET WORKS, DEFINE TARGET SYSTEM FOR RFC
RFC DESTINATION
R/3 CONNECTION CREATE
INTERNAL CONNECTION
TCP/IP CONNECTION
RFC DESTIONANTION SHN 800
CONNECTION TYPE 3 CONNECTION TO R/3 SYSTEM DESP_RFC DEST FROM BW TO R/3.
LOGON DISIT YES OR NO SELECT NO.
TARGET S02                       SYSTEM NO 00
SAVE AS HOSTNAME    IP ADDRESS
LOGON TO R/3, LANGUAGE EN, CLIENT 800, USER EX: SAPUSER PASSWORD: INDIA, SAVE.
TEST CONNECTION SAY ENTER
REMOTE LOGON SAY ENTER GIVES OUT SAP R/3 NEWS SESSION.
GO TO SAP R/3
SALE, EXPAND ALE, SEND & RECIVING SYSTEM, SYSTEM IN NETWORK, DEFINE TARGET SYSTEM FOR RFC.
RFC DESTINATION, IN R/3 CONNECTION CREATE RFC DESTINATION L100, CONNECTION TYPE 3 DESCRIPATION R/3 TO BW
LOGON/SECURITY
TARGET HOST S08 SYS NO 00 SELECT HOST NAME, LOGON DETAILS LANGUAGE EN, CLIENT EX: 800 USER SAPUSER GIVE PASSWORD, TEST CONNECTION SAY ENTER.
GO TO RSA1 SOURCE SYSTEM
SAP SYSTEM RELASE &(MANUUALY)
CREATE SOURCE SYSTEM
RFC DESTIONATION SHN 800
             LS OF R/3          SHN 800
SOURCE SYSTEM NAME SHN 800
BACK, THEN SYSTEM ITSELF CREATE IMPLICITLY ALL IDOS.
Assign points if it helps u....
Regards,
Ramesh

Creating Flat File Source System in BI

Hi,
How can I create a flat file source system in BI???

Hi,
Here are the steps...
1. Go to RSA1.
2. Click on Source Systems.
3. In the right pane, right click on Source Systems and say "Create".
4. Then choose the option of "FlatFile" from the available options.
5. Give the name to Source system.
Hope this helps.
Regards,
Yogesh.

Creating MSSQL as Source System

Hi All,
I can't find any notes how to create MS SQL Server as source system in BW. Could anyone write me how to fill these fields?:
- Logical System Name
- Source System Name
- Conn. info
I will be grateful for any example of correct configuration of MSSQL InfoSource.
Regards,
Maciek

Hi Maciej,
Not much idea..I obtained the below info from SAP Help..
+The database library is made available in the SAP Service Marketplace in the SAR archives LIB_DBSL.SAR, in the patch directories, which are independent of database manufacturer.
You can access the required directory via the Software Center of the SAP Service Marketplace in the Internet, via the following address: http://service.sap.com/swcenter-main ® SAP Web AS ® Relevant SAP Web AS Release ® Binary Patches ® Relevant SAP Kernel Release ® BW Application Server Operating System ® Source-Database Management System® LIB_DBSL.SAR.
Load the file into the directory indicated by the environment variable DIR_LIBRARY.
The file LIB_DBSL.SAR forms a complete SAP kernel patch together with the database-independent DW.SAR archive. (SAP Note 19466 - Downloading SAP Kernel Patches describes how kernel patches are imported).
Next, unpack the SAR archive with the SAPCAR tool. Before doing so, refer to note 212876- The New Archiving Tool SAPCAR
We recommend you also download the latest DBSL from the SAP Service Marketplace for SAP DB databases.+
Bye
Dinesh
Do not forget to assign points to all the people who helped you!!!

How to create file type source system connection

Hi All,
I have to load data from Flat files , but when i checked the source system connections File type source system connection is not present. Please guide me how can i create the same.
Apoorva

Hi Apoorva,
Goto RSA1 -> Source System -> Right Click on File Folder .-> Create -> Logical system Name as FLAT FILE -> Source system name is the description for this source -> Enter.
Once it is created you can right click from that file and check whether it has created properly or not.
When u r moving the objects which are created under this source, the same flat file source should have been created in the target system also. And check for the entry in the target system table RSLOGSYSMAP for the flat file when u r moving the flat file objects.
Regards,
Muthu.

How to create UD Connect Source system and datasources.

I am currently working on BI 7.0 and I need to report on Standard Queries on xPD (Extended Applications Product Defination)
In the BI Cont library it states the data for this application is fetched using UDI rather than Table Extraction. Can anybody please help me with documentation on Steps for creating a UD connect Source system and UD Datasources and how I should proceed.
Edited by: Amit Pal on Feb 19, 2008 6:17 AM

Hi,
Pls chk this link;
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-udc-jdbc%20universal%20data%20connect%20jdbc%20interface.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11cfa83d-0401-0010-9597-d3b7f487d72d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f094ba90-0201-0010-fe81-e015248bc5dd
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/frameset.htm
hope these helps,
Regards
CSM Reddy

Probelm in creating R/3 source system in BW 3.5!

Similar Messages

Maybe you are looking for