Probelm Starting up with 14' 700
Sometimes not all the times my ibook will start up and make a beeping noise then the sleeping white dot thingy will blink. then it will restart and do it 3 times. then start up regularly. this has only happened twice. and the 2 times were not close to each other. but one i noticed when it happen i started it up on a unlevel suface (like my hand) with not power cord. when i start it leveled this has not happend. i really want 2 know why this has happened cause, i have not had any probelms but this.
iBook G3 700 Mac OS X (10.4.3)
yea it started up when it put the ram back in, but when i tried to run a verify on the disk the computer shut off. When i tried to start it up again it began to act like before. with the beep and the light thingy blinking. then it did not start up again. I taking it up to the apple store tommorrow to see what they say.
iBook G3 700 and iBook G3 600 Mac OS X (10.4.3) the 700 is 14 in, and 600 is 12 in
Similar Messages
-
BBPGETVD - error:backend systems with release 700 are not supported
Hi,
When I am trying to replicate vendor data from EEC to crm 4.0 via BBPGETVD.
I get the error message"backend systems with release 700 are not supported"
Is anyone have Idea what is wrong? and how can fix it?
Thanks,
RachelYossi,
I believe that standard transaction does not work with ECC 6.0. The standard response would be to upgrade your CRM system to 5.0 so that you can download vendors from ECC 6.0.
Bascially the vendor replication programs in CRM below 5.0 aren't really that reliable for delta downloads(one error will cause an entire load to fail). So you probably at best should copy the SAP standards to generate custom load programs as a starting point.
It is not too difficult and overcomes some of the restrictions that SAP puts in place(i.e. you can only use one number range for vendors downloaded, etc.). This is definitely one of the weak points of CRM 4.0 that was fixed in CRM 5.0.
If you have more questions on this let me know.
Take care,
Stephen -
Starting workflow with HTTP-Post
Hello,
like I wrote in Starting workflow with HTTP-Post I have a problem with starting a workflow with a http-post:
I have an installation of SAP ERP 2005 SR2 IDES on Win2003 SR2 SP2 and want to start a simple workflow with an external application. Therefor I created an elementary test-workflow and set the general task flag so everybody is allowed to start it. So far everything work fine as I start it manually.
Now I want to start the workflow by an external application over a HTTP-Post as described in
http://help.sap.com/saphelp_47x200/helpdata/EN/54/de9e3887d6174fe10000009b38f842/content.htm
I configured the webserver (Customizing Web-Server) as follows:
Service: WebFlow (Intranet)
Address: http://192.168.0.216:8000/
Path: SAP/BC/WORKFLOW_XML/?
and sent a post via perl to http://192.168.0.216:8000/SAP/BC/WORKFLOW_XML/?protocol=01&localkey=WS99900004
<?xml version="1.0" ?>
<WfMessage Version="1.0" xmlns="http://www.wfmc.org/standards/doc/WF-XML">
<WfMessageHeader>
<Request ResponseRequired="No">
<Key>http://192.168.0.216:8000/SAP/BC/WORKFLOW_XML/?protocol=01&localkey=WS99900004</Key>
</WfMessageHeader>
<WfMessageBody>
<CreateProcessInstance.Request StartImmediately="true">
<ObserverKey>http://192.168.0.224</ObserverKey>
</CreateProcessInstance.Request>
</WfMessageBody>
</WfMessage>
The Web-Server returns
C:\FH\SAP\perl-scripte>perl http-post.pl
HTTP/1.1 200 OK
Server: SAP Web Application Server (1.0;700)
Content-Length: 0
Content-Type: text/plain
Client-Date: Sun, 01 Jun 2008 11:00:24 GMT
Client-Peer: 192.168.0.216:8000
Client-Response-Num: 1
but it seems that nothing happens.
I also tried to post the XML via html-form-field with the same result.
Did I forgot something essential?Hello Daniel
It's 6 years after you posted your question, but I found your post very useful and thought it would be worth updating for future reference.
I've just managed to trigger a workflow via http.
URL :
http://server.domain:8000/sap/bc/workflow_xml?sap-client=110
Java :
URL obj = new URL(url);
URLConnection con = (URLConnection) obj.openConnection();
String userpass = "username:password";
String basicAuth = "Basic " + javax.xml.bind.DatatypeConverter.printBase64Binary(userpass.getBytes());
con.setRequestProperty ("Authorization", basicAuth);
con.setRequestProperty("Content-type", "text/xml");
con.setDoOutput(true);
DataOutputStream wr = new DataOutputStream(con.getOutputStream());
wr.write( xml.getBytes("UTF-8") );
wr.flush();
wr.close();
You can then read the response.
I found that until I added the sap_client parameter I couldn't debug in CL_HTTP_WORKFLOW_XML->IF_HTTP_EXTENSION~HANDLE_REQUEST. Then I found that the content type has to be "text/xml".
I set the xml variable (the data sent to ECC) to :
<?xml version="1.0" ?>
<WfMessage Version="SAP.1.0" xmlns="http://www.wfmc.org/standards/doc/WF-XML">
<WfMessageHeader>
<Request>
<ResponseRequired>Yes</ResponseRequired>
</Request>
<Key>HTTP://server.domain:8000/SAP/BC/WORKFLOW_XML/?~localkey=WS90000074</Key>
<Operation>CreateProcessInstance</Operation>
</WfMessageHeader>
<WfMessageBody>
<CreateProcessInstance>
<Key>HTTP://server.domain:8000/SAP/BC/WORKFLOW_XML/?~localkey=WS90000074</Key>
<ContextData>
<YOUR_CONTEXT_VARIABLE>x</YOUR_CONTEXT_VARIABLE>
</ContextData>
<StartImmediately>Yes</StartImmediately>
</CreateProcessInstance>
</WfMessageBody>
</WfMessage>
regards
Steve -
I guess I squeezed my entire issue into the subject line. lol When I sync my iphone to my laptop I notice that all my address book pics and iphone pics have become lower resolution, even though I started out with the resolution that I really needed to produce decenty address book printouts. I doubt I can correct the losses of resolution that have occurred but can anyone help me figure out how to prevent future losses? Thank you!
Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
'''''Address Bar Search'''''
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
(3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
Does that work?
'''''Search Box'''''
Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
Do either of those work?
There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am. -
fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead
It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore -
Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit". Please advise on how to fix this error. Thanks
You probably need to delete your preview cache. See here
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic
Preference and other file locations in Lightroom 5 -
After upgrading to Mountain Lion, Interface builder starts up with an error every boot.
I've got a late 2008 Macbook Unibody 13", and a few months back I upgraded from Snow Leopard to Mountain Lion. Ever since the upgrade, at every boot up Interface Builder starts up with an error. I've just ignored it mostly, but now I'm getting annoyed with it. How can I find the programs that start up every boot to research this, or stop it from loading Interface Builder every time?
You have to delete it using the minus sign at the bottom. The check/un-check is for hiding items.
-
How do I start iTunes with whichever iTunes library I want?
How do I start iTunes with whichever iTunes library I want?
I've created a 2nd iTunes library using the "press shift-key while opening iTunes from the start menu" method given in iTunes help. Now, when I try to start iTunes from the Quick Launch menu or from the system start menu, I get the new library--without choosing it.
Otherwise, the new library works as I'd hoped. By turning off "Copy files to iTunes Media folder when adding to library," I'm able to use "Add Folder to Library" (where the folders are in the 1st iTunes library) without using more disk space for the 2nd library. So far, it works just fine for CDs and movies. I'm anticipating an iPad which can hold much less than my iPod Classic.
I have the latest iTunes (10.2.1.1)A solution found!
I found where Apple addresses the question. Actually, I had tried this before I found Apple's answer and before I asked the question here and I didn't get it to work. I finally have it working, but the Apple answer is missing a step--or so it seems.
Locating Apple's answer:
From the iTunes window,
Help > More resources > iTunes Support Website > iTunes Library and Backup > iTunes Library >
How to open an alternate iTunes Library file or create a new one.
Apple quote:
1.If iTunes is running, quit iTunes.
2.If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
3.If you are using the Mac, open iTunes and immediately hold down the Option key.
4.You should see one of the following screens:
End quote.
As it says, you get a prompt to: Quit or Choose Library or Create Library.
I created my new library by choosing "Create Library" and expected to be able to use "Choose Library" later. So, when I clicked "Choose Library," I got a new window that's titled "Open iTunes Library" (it looks a lot like a Windows Explorer window). I selected (on the sidebar) the old library, clicked "Open" and nothing happened. The problem is likely my inexperience with this type of issue, but, still, the solution seems hokey.
After too much screwing around and a 24oz beer, this is what's working:
1. If iTunes is running, quit iTunes.
2. Hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes. (You don't have to have the shift key down until just before you click the last "iTunes.") Don't release the shift key 'til the prompt comes up.
3. The prompt is: Quit or Choose Library or Create Library. Click "Choose Library."
4. When the "Open iTunes Library" window comes up, click the desired iTunes library on the sidebar. (Mine are named "iTunes" and "iTunesIPad.")
5. Then, you'll see a list of items in the right pane. Find the file named "iTunes Library.itl" and click it.
6. Now, with both the iTunes library name selected on the sidebar and the "iTunes Library.itl" file selected in the right pane, click the "Open" button.
7. iTunes will come up using the desired library.
8. Using iTunes from the Quick Launch menu or the desktop will bring up the same iTunes library again, even if you shut down your computer.
9. When you want to change the iTunes library in use, start at step 1.
Nice about this, is that I would only have to get into the "iTunesIPad" library if I need to add something to it from my regular "iTunes" library or I want to sync to the iPad. Most of the time, I'll use my regular 185GB "iTunes" library (even here, I deselect many movies so that I can sync the library to my iPod).
Caution:
I must add the warning that I'm doing this because the iPad (that I don't have yet), won't hold even half of what I have in my iTunes library. At this point, the "iTunesIPad" library will take up very minimal disk space since it's using pointers to the regular library rather than copies from the regular library AND it's easy to switch between libraries only when needed. I can't say that this will all work until I try more setup work and I actually use it with an iPad. If someone knows that this is going to cause problems or if they have a better idea, I'd sure welcome comment. BTW, before trying this, I restructured my iTunes library (File > Library > Organize Library > Reorganize files in the folder "iTunes Media.") to bring it up to date and then backed it up on an external drive. The website "iLounge" has an article about the old and new library structure. -
^^ that's the question... Want to delete the current and start over with the one I've already created, but want to keep all my songs and apps. Is it possible?
You can have apps and music from multiple IDs on your computer or your phone, but you will need the password for each one to install updates or to reload the content. You cannot merge the content from one ID into another, however.
-
How can I start anew with Photos and clear the (minimal) stuff it has uploaded
I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
more than I have-and of course it got stuck there, like it has for the last week.
I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
<Re-Titled By Host>How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
It is hard to say from your post, why the migration did not succeed in your case.
by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang? Or did already the upgrade to the Photo Library fail?
If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions. (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
Can you launch Photos at all? If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary. -
Settings: how do i tell Firefox 4 to start up with a fresh page in stead of one from cache?
When i start up firefox the system automatically starts up with the last page in cache in stead of downloading a new one from the site on my startpage.
You can try to use [[Clear Recent History]] to clear the cache if you exit Firefox.
-
My iPhone 4 has never backed up to anything, the account I started it with I never used so I was never able to verify it or anything. I now have a new icloud account and I want to backup my phone before I get a new one in a couple of days. If I delete the old account will I lose my photos or will they still be on my phone (remember they've never been backed up)? Thanks!
You cannot delete an Apple ID, you can just stop using it. If your photos are still on your phone now, then I suggest you do back them up. Transfer them from the phone into your iPhoto Library. iCloud only backs up your Camera Roll automatically. But the Camera Roll only contains new photos that were taken but not yet transferred using iTunes.
-
What's the right way to start up with Portal's dev?
Hi to all Portals experts,
I am really struggling to start up learning Portals and more specific their development.Here is the problem - I am a bit new in the NetWeaver but not new in J2EE environment. I went trough all WebDynpro tutorials and really the documentation was written nice.Good hands-on approach with lots of examples and that is what I found with WebDynpro - everything well explained step by step.
But when I started the Portals Tutorials I was a bit disappointed.
1.First of all, there is no explanation which tools one needs to start up with Portal Dev?
I only have SAP Netweaver Development Studio SP15 installed on my PC and I dont have any access to R/3, CRM or other system. Is this enough to at least start to learn Portal Development or not?
2. I realize well that at some point I will need real system to play with but , until than what useful practice I can do on my own and how?
- Even within the WebDynpro tutorial , the very first Part : Define a system - (http://help.sap.com/saphelp_nw04/helpdata/en/cb/f4bc3d42f46c33e10000000a11405a/frameset.htm) -In the portal, navigate to System Administration - System Configuration - System Landscape
Which Portal ? I dont have System Administration on my NWDS SP15?Is is something I should install?unclear?
3. My understanding is that NWDS SP15 contains EP , within its J2EE local engine , but is this EP.6.0, is this enough to develop complete Portal Application A-Z or not - unclear ?
4. PDK. Somewhere I read that Portal Application can be developed with either WebDynpro or with PDK. Ive read about PDK but It is not clear if it is Dev Kit as its name says , should it be downloaded , installed or imported into NWDS, again? And bottom line do I need PDK as a Portal Developer, and at which point?
I only need the starting point for Portal Develop. or some guide that should set milestones 1st ,2nd .. I would prefer the hands-on approach. If some of you has already taken this path and can help me with your directions, links, at least how to get started, I will highly appreciate it! Thanks in advance!Regards, BobHi Bob,
The below reply is as per my experience with Development so far:
1> It is not necessary to have access to R/3 or any other SAP/non SAP application unless you are writing an application in connection to them.
Example: An application which is reading data from R/3 and displaying the same in a table. Yes, in this scenario you would require access to R/3.
2> System Administration is a role just like Home, User Administration, etc in Portal itself.
It contains all the configuration related to System Landscape, Knowledge Menegement, etc
If in case you have not been given this role, you may ask your System Administrator to create the required system (PCD Object). You may then use this system from your Profile (Personalize Portal) link directly.
3> NWDS resides over Portal so you may create your own standalone application or application thats talking to the underlying Portal.
WebDynpro is used to create UI & likewise you may build Web applications or EJB applications.
4> PDK stands for Portal Development Kit. YUou may ask your administrator to download and assign the same to you. This would appear as a "Java Developer" named role in your portal. It contains all APIs required for Java development.
If you do nto have this, you may still use the Javadocs provided on SDN itself.
Depending what custom developmetn you do, depending upon the type the .par (portal archieve), .ear (Enterprise archieve), .war (web archieve) needs to be deployed in portal, so that users may access/view the custom created data.
Hope this helps
All the best!
Warm Regards,
Ritu -
I want to delete my old account: [email protected] and start over with my correct email-account: [email protected], but every time, I try to by a plan or get a new membership, the site tells me, that Creative sui is not available in my country, the democratic republic of Congo!!!!, but I live ind Denmark. Hoew can I buy, and how doo I change my Adobe Id in my CC desktop. Ive tried for several days, but no matter which membership, I ask for, the answer (congo is the same. What to do???
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
Maybe you are looking for
-
I'm trying to calculate the number of days until your next birthday. Only using current month, day and birth month and day. I can get close but i'm way off. When i enter in the next day, the amount of days is supposed to be 364. This is where I am ha
-
No Authorization error in executing a planning sequence
Hi, We are using BI 7.0 Integrated Planning. We have implemented Mark Bernaud's file upload solution. We have used a planning sequence that uploads the file and stores it in a cube. Using it, we are able to upload files without any problem when execu
-
Visual C++ Runtime Error R6016 not enough space for thread data
I get these errors on startup of my Windows 8.1 (with all latest updates installed) after login. 1. It would be helpful if the error message actually identified the exe or dll causing the problem. Program: C:\Progra... Is not a very helpful clue to t
-
hi all i am a newcomer to fireworks, and i am having fun working with it, but i am having the newbie problem of knowing the limitations of the app. here's my problem: i'm creating my homepage with a nav bar on the left, swapping out images in a slice
-
Hi ! I am unable to connect wifi via iph4s :(
hi ! I am unable to connect wifi via iph4s.. my iph4s wifi tab is greyout. wifi disabled, please tell the solutions as soon as possible ... thanks