Probelm with Printing FP image

i want to print the FP of a VI multiple times and generate a PDF document.
Before:
i have used the following options.
VI Properties >> Print Options >> Print with Execution     => this creates 3 pdf documents (on printing 3 times) instead of one.
VI Properties >> Print Options >> Scale printed front panel to fit page.     => this option scales the FP to fit the page.
with these options the FP image really fits on the page.
Now:
i need a single PDF document with all the 3 pages.
Problem: If i use Append image to report VI, then i cannot scale the image on the page.
by saving the image to disk and then appending it to a standard report, the Image is not really fitted with the page in the PDF.
Please help
thanks
Renn
Kudos always welcome for helpful posts

i'm attaching an example vi which uses the method 'Print. Panel To Printer' and the created pdf. see page3.pdf. The quality of the pdf is really good.
PanelPrint.vi prints a page each time it executes. i need a single pdf (or single print job) with multiple pages.
but if i am using the report generation VIs, i am appending images to report and not getting the desired quality.
any suggestions??
attachments:
CallerVI_Lv9.vi
PanelPrint.vi
Kudos always welcome for helpful posts
Attachments:
CallerVI_Lv9.vi ‏9 KB
PanelPrint.vi ‏14 KB
Page3.pdf ‏17 KB

Similar Messages

  • Print as Image changes between Adobe Reader ver7 and ver8+

    Hi,
    We have customers that upgraded to Adobe Reader ver8+ and are now experiencing printing issues with our printer driver (operating system is Windows XP/Vista). When they use Adobe Reader ver8 and above to print their PDF files, with "Print as Image" option selected, the print output is smaller. It looks like the latest version of Adobe Reader output the images using a square DPI. Our printer (line matrix) does not handle square DPI (for example: printer resolution are 120x48, 120x72, 120x144, and 180x96).
    Our printer driver just takes the output from the Microsoft print spooler and just encapsulate it with our printer language. We don't do any image manipulation. So, I would like to know was there a change in the way Adobe Reader version 8 and above create the output image? If so, is there a backward compatibility switch our driver can issue during the printing function?
    I tried talking to Adobe Tech support (bronze support), but they only handle end user issues. Is there a tech support option that I can purchase that will allow me to get to the root of this driver compatibility issue? Any suggestion would be appreciated.

    Adobe doesn't apparently care. I get this problem all the time on our work network. There's a lot of questions in this forum and elsewhere on the internet.
    The best answer I've seen is that there's something wrong with the PDF or you don't have the right font, or you did something wrong, or here try this ridiculously complicated workaround. I wish they would just fix their program!
    Suggestions: go through all the "standard" things like updating printer drivers, printing the document as an image, updating Adobe (yeah, like "it works now" is a new feature in the latest version), etc. It's possible that could fix the problem. Otherwise, wait until Adobe releases a version of Reader that doesn't have this issue.

  • Print negative image (Ultiboard 10.1)

    We're changing from positive to negative working prototype PCB production.
    I'm trying to produce a negative track image by checking the "Print negative image" in Ultiboard 10.1
    It works but the whole page is printed black (way beyond the board boundaries) wasting ink / toner.
    I can set up a custom page size to reduce the problem but that's not a staightforward task.
    In desperation I tried changing the track/pad colors to white, putting a solid black polygon on a Mechanical layer (the same size as the board outline) and NOT using "Print negative image". That works very well (especially for irregularly shaped boards) except that "Leave Drill Holes Open" then doesn't work; or at least it does but it thinks I still want white holes whereas they should now be black.
    Anyone have any thoughts please?
    Bob

    Hello Bob,
    I have tried putting a solid polygon in and lost the holes the same as you describe. I think as you have said, the best option to save ink that works is to set up a custom page size with "Print negative image" on.
    Regards, 
    Jack. W
    Applications Engineer
    National Instruments

  • Help with printing hard copy from Acrobat PDF

    Copy created in InDesign and printed to Adobe PDF is OK on screen but printing hard copy with random chunks of text missing. Same on both my printers, doesn't happen with doPDF. Any ideas? Thanks

    I suspect that what you are asking is simply to print to a new PDF with print as image selected. You can also save as an image file and then open the images as a new PDF.

  • The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size.  How do I get the thumbnails back to the standard size and be able to work with them?

    The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size.  How do I get the thumbnails back to the standard size and be able to work with the photo files?

    What version of iPhoto and system are you running?  On the guess that you're running the latest iPhoto, 9.4.2, Try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the thumnails, Option #2.
    2 - It may take 2-3 attempts so don't give up after only one attempt.
    OT

  • Action to: Print current document to PDF Printer "As Image" with Specified DPI

    I FREQUENTLY do the following task on documents.  I would LOVE to have an action that did it for me.  Can someone help me create one or point me to someone who can?
    Version: Adobe Acrobat X Pro.  Windows 7 64-bit
    With current PDF file open:
    2) Print
    3) Select PDF Printer
    4) (Under advanced printer settings) choose "Print as Image", "150" DPI.
    5) OK
    6) Save file AS the original with _printed appended to the filename.
    Image1: Printer dialogue box
    Image 2: After selecting the PDF Printer and pressing "Advanced"

    The forum added some nice links and i found my answer here http://forums.adobe.com/message/1179199#1179199 - changed the registry key permissions and it's working like a charm. Thank you.

  • I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign?

    I need to create 4 @ A2 boards that print adjacent to one another (all landscape format) with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards? Is it best to use Illustrator(CS3) or Indesign?
    Thanks.

    Re: I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign
    If possible, please try Indesign CS 4.

  • Having trouble with iphoto, will not print full image

    Having trouble with iphoto on my laptop and desk top computers.  On laptop will not let me print full image and having trouble getting correct rotation to print
    On desk top printing too dark and cannot get correct rotation there either, seems like the problem just started recently

    Ronleedek-
    What App are you using with the microphone?  I've used Skype, which has a "test call" feature to check your microphone.
    There is a good chance your microphone is defective, possibly disconnected inside the iPad.  If an Apple Store Genius can not fix it, you may get a new iPad on the spot.
    Fred

  • Issue with  print image in air

    hey frnd,
    plz check this link
    http://livedocs.adobe.com/flex/3/html/help.html?content=printing_5.html
    hey frnds,
    while using this multiple print datagrid code, getting 1 issue with
    print image in printheader mxml file.
    I'm adding 1 image tag and runtime getting image path in variable and
    want to print tht image in header ,
    but it is not get printed but if i'm giving @Embed image as a source
    then it is print.
    Is any way there to print runtime image after adding in printheader
    file ?
    thx in advanced,
    [email protected]

    is any solution there ?

  • Lightroom 4 contact sheet print crashes with over 12 images - Please help.

    Lightroom 4 consistently crashes every time I attempt to print a contact sheet containing over 12 images. Any less and the task is completed without error, any more and it inevitably crashes. Any thoughts?
    My workaround has been to export the images and create large contact sheets in Photoshop CS6, but this takes twice as long.
    This is a daily task and is significantly disrupting my workflow. Please help.
    Regards,
    Eliot

    So, I had this problem tonight after experiencing no problems with Lightroom 4 previously. I noticed that in the print dialog box, where you can select to print "all" the pages or a page range, the page range radial was highlighted and the defined page range was "7" to "7". I was only printing one image so I changed the print range to "1" to "1". And it did the trick. Crazy, eh?

  • Using a mac. will not print...no image with print preview ...why no print image?

    why no image when use print preview nor with print function? using a mac

    Hello my friend,
    When troubleshooting we look to see if the problem is local or global.  Again, you may very well know this so apologies.  Anyway, if you haven't already, then please create another account on your Mac.  You should do this anyway, actually everybody should.  (The Tim knows).  So test to see if the problem exists in the other account as well.  I name the extra account maint and make it an admin account.  If you find that it prints normally with the maint account, that is good, because it just means that one or more of your local account preferences are munged in the primary account.  Global on the other hand is a bit more work to solve.  If that's the case you can try reinstalling the operating system.  In most cases that will overwrite the low level culprit and put you back in the sweet zone.  Let me know how it goes, it's an interesting problem.  I like those.  Especially when they aren't mine.  ;-)
    I have been supporting Ma cs for a very very long time.  If IICX rings a bell.  Anyway, just reinstalling the OS over the top is pretty quick.  However, we techs like to find the little sucker that's causing the problem and we can spend many hours scouring to locate it.  It's a challenge to us not to let the computer get the better of us.  Win.  But the reality of it is often a simple OS reinstall will get you back in the game.  Beyond that is a hardware problem concern.  To me from what you describe it sounds software to me.  So don't worry too much about that at this point.
    Peace, Tim 

  • Printing .GIF images with PHP

    Hello,
    As part of a PHP IF statement, I would like to print an image
    instead of text. How do I do this?
    Thanks in advance,
    John

    I've done some dabbling in PHP's GD library (the image
    manipulation extension of PHP).
    What I have done in the past is create a separate php file
    just for the image output. I then pass in the parameters needed to
    create the image in the image request. So as an example, I'd send
    the image request like so:
    http://domain.com/preview_image.php?text_string=Type%20Text%20Here&text_color=black&bg_col or=white&font=ADORABLE
    preview_image.php is the php file that contains the script to
    generate the image based off of the text_string, text_color, and
    bg_color variables contained in the query parameters.
    Or if you don't need a dynamic image, just echo the image tag
    inside the if statement:
    echo "<img src='pathtoimage.jpg'>;

  • We are facing some probelms with reports6i

    hai,
    I am facing some probelms with reports6i.
    1.when i try to mail one report it is coming in the 'eps' format.how
    can i open this format.
    2.we are calling the report using the command line method not
    run_product.for these reports 'Generate to File' menu is not working.It say
    an error like Umimplemented Error (rep-0999)
    3.In one report we are using clob field.but when we take the print output of
    this field some of the characters are missing in paper.the problem what we
    think is that, there is no entre key padding when a word wrap is
    occuring.We have to give it manually which is not applicable in all
    cases.Please give some methods to solve these probelms.
    Please treat this as an urgent matter.
    thanking you,
    dilip

    If you have not set desformat you will get a file format determined by the driver of your default printer (even though you are not printing !). The file extension always seems to be .eps regardless of whether it is actually an eps (postscript) file.
    You can get other formats eg. pdf by setting desformat.
    If you do want to work with eps files you can download 'Ghostscript and GSView' which can display and convert them.

  • How to print to Canon irC5051 with Print Server?

    [edit] I am using 10.7.5 not 10.6.8 sorry [\edit]
    My company recently upgraded to Canon Image Runner C5051 units.
    They added print servers with authentication for follow me printing (print at any machine around the building by authenticating).
    I have read tons of discussions, forums and google articles on how to get image runners to print with os x - yet to no avail.
    I have downloaded both the recent drivers from canon (the PS and URII) updates.
    I can only seem to connect to the printer using the "Windows" domain feature in the add printer settings.
    The Windows URL is \\printARL\ARLC-Secure.
    I can ping the \\printARL and retrieve the IP address.  But I cannot do the same with the full path (\\printARL\ARLC-Secure)
    Trying to LDP print to the printARL ip does not work.  I have no way of figuring out the full path ip address of the print server.
    On my windows computer it shows "null" in the port/ip address on the PORTs tab.
    So with URII I cannot identify the LDP ip address to use so if I connect via the windows domain it keeps returning error -50.
    I guess this makes sense because its not LDP.
    Using the windows search to connect and applying the Canon 5051 PS driver it seems to function.
    It connects, allows to me authenticate, moves the file to the print server, and shows up at the printer.
    But when I print, it does nothing.  No output.  ...sometimes it even makes the sound like it is printing, but then no dice.
    If I try and Generic PS or PCL driver, it sends the document.
    But when I print, it seems to produce a paper format error (thinks it LGL)
    So if you force the printer to print to LTR, it spits out reems of giberish.
    There must be something I am missing.

    Sorry for missing your post. I don't check the 10.6 forums too often.
    Reading your post it sounds like your are using uniFLOW, which is the follow-me printing app. So if you want to continue using this with the Mac there are a few things to note.
    1. The Mac UFR2 driver wants to communicate directly with the copier. With print jobs being routed via the Windows print server (uniFLOW secure input queue) there is no chance of there being two-way communication and this often causes the -50 error you mention.
    The solution is to use the Canon PPD, but this would require the ADV C50xx to have the optional Postscript kit. And given the gibberish output you mention it would seem that this kit was not purchased. So I would be talking to the Canon rep. If they had scoped your business correctly and saw the Mac/s then the PS kit should have been ordered.
    2. You cannot ping the printer queue on the Windows server. So pinging \\printARL\ARLC-Secure won't work as you have found. But you can ping the Windows server, which you did and this worked. And, your issue is not due to an inability to connect to the Windows queue. It is a driver issue.
    3. Using the PS driver appears to work. Lets you authentice but does not print. This is due to the lack of the Postscript kit in the copier.
    4. Re the Generic PS, no PS kit means no printing. And the same goes for PCL.
    So, in summary. The UFR2 driver is not designed to print via a Windows server. For your setup, the Postscript kit in the copier would solve your issue.

  • Print a IMAGE in a REPORT

    I need to print a IMAGE (hosting in the SE78 transaction store) in a REPORT.
    is it possible????
    Wait your responses. See you.

    Hi,
    Using ALV, you can upload logo into report like this:
    For those who wish to upload and use a picture in your ALV abap reports.
    Steps for uploading Logo :-:
    1.  Goto the transaction OAER
    2.  Enter the class name as 'PICTURES'
    3.  Enter the class type as 'OT'
    4.  Enter the object key as the name of the logo you wish to give
    5.  Execute
    6.  Then in the new screen select Standard doc. types in bottom window
         Click on the Screen icon 
         Now, it will ask for the file path where you have to upload the logo
    7.  Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
    or 
    Import Logo and Background Picture for Reporting
    In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
    From the SPRO: 
    HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
    Activities
    1. Enter the Name of your logo/background picture as an object key in the initial screen.
    2. Make sure that the class name is PICTURES, and the class type is OT.
    3. Choose Execute.
    4. Double-click the document type Picture on the Create tab page.  A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
    5. Enter the path and choose Open.  The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
    6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
    Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
    If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
    Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.
    Regards,
    Bhaskar

Maybe you are looking for

  • How to connect to iPhone?

    I inadvertently clicked on the my devices and it disconnected my ihpone.  There seems to be no other way to connect again without disconnecting the phone. Or is there a menu or button that I'm not seeing?

  • Excise invoice backposting

    Hi experts, I want one clarification for following scenario. I want to do excise posting for PO which was before 2 months of material which is non-excisable. What I have done that in T-code J1IH I enter document as PO number that is used before 2 mon

  • How to post message from SAP to solution manager

    Dear Friends, We have configured solution manager service desk and the users were able to send messages so that we can view it in solman ITSM. Now we want to bifurcate the messages from different people, hence we woule like to use of Problems in inci

  • Course Appraisal (OSA-LSO)

    Hi All, I have created a OSA template for Providing feedback to the courses attended my the employees...The problem is that in the Template the course field shows all the courses that are in the system instead of only the courses attended or complete

  • Proxy settings in OSX 10.4.6 iBook G4

    Hi, I recently changed proxy settings to using a pac file (http://wpad.bham.ac.uk)as my university stated that this was the best way to access athens and suchlike. However, I keep getting a pop up box telling me to enter my username and password- eve