Probelm with .swf but not .exe or Test Movie?
I've created this project that works perfectly when I view it through "test movie" (CTRL+Enter) and when I publish it to an .exe file - but when I view the .swf it doesn't work correctly.
I am using Flash CS3 - actionscript 2 - Flash Player 8
In my project I have controls that allow me to set the brightness and contrast of a movieclip, but when I view the .swf and I click on other buttons (unrelated to contrast and brightness), the contrast and brightness of my movieclip get reset. This does not happen when viewing the .exe or in Test Movie mode.
I would greatly appreciate any help - thanks!
If your calling that action from within your movieClip, be
aware that it's looking for frame "cPause" in the root level, not
in your movieClip. And, if you load the SWF into another "shell"
SWF, the shell will become the root, and it will look for cPause
there. If cPause is in your movieClip, then take off
"_root".
Similar Messages
-
3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...
Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok. -
Why does the FP 10 work with firefox but not with IE8
I down loaded the folowing for xp FP uninstall, FP plugin and FP debug from the link in one of your replys. now I can watch youtube with firefox but not with IE8. you asked me before if i was using 16 bit. whats that mean and how do I find out? please help I just want to watch youtube on IE!
Ok Shag, since you hadn't been on a Forum before, then I'll take some of what I said back:-) I wanted you to stay on one thread, you can get in trouble trying things that may cause you more problems than you had in the beginning. I just had your best interest at heart
I'll even overlook your all caps here:-) At least you responded
Now since you say you fixed it, what you should do is to confirm it is fixed by taking a look at your Flash folder. This contains all of the Flash files for IE and FF. Then make sure you have the IE add on and the FF add on. That way if you have any future problems, at least you would know it is not the Flash Player.
You should only have 2 .exe files for IE and 1 for FF.
For Video editing, I would check Microsoft and see what they have. Perhaps someone else will come along with other info for you.
No, I don't get paid here, since I am not an employee. Just a user helping others, since I had a problem at one time and after 4 hours of researching solved it.
Let me know if you want to check the Flash files.
Thanks,
eidnolb -
i have a website which opens only with google, but not google from safari. how i can get google w/o using safari?
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support. -
Project TV works fine with IE. It used to work with Firefox but no longer. I tried the "Proxy" suggestion and clearing History with no results?
scher2000
First and foremost, thank you for your help and concern. It is appreciated.
Project TV works just fine with IE but will not work at all with Firefox although it did work a few days ago. I have tried::
Clearing History, as suggested,
Changing the "Proxy: settings, as suggested
This has been all to no avail.
Link:
http://www.free-tv-video-online.me/
Also, my WOW Speed test works fine with IE but not with Firefox; I just ried it on both.
Link:
http://speed.nap.wideopenwest.com/
I prefer Firefox but it appears to be giving me problems resulting in having to use IE.
Again, Thank you.: -
I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?
From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online.
First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
Install that and let me know the result!
Have a great day! -
Move graphics with text--but not inline--in PM...??
Hello, is there a way in PageMaker to move graphics with text but not inline? I ask because right now I see two options for graphics:
--inline, so you cannot place the graphic exactly where you want AND the text only flows way above or below--but not next to--the graphic
or
--independent so you can place the graphic exactly where you want and the text DOES flow right next to the graphic, but then the graphic doesn't move with the text
I'd like to be able to place graphics exactly where I want AND have them move with the text, like the "Move object with text" option in Word.
thank you!
Lwell it has been a while since i used PageMaker so i didn't realize it was "dead."
though i'm not surprised and am kind of glad. i was hired into a new job recently
to work on a department newsletter, and i'm trying to find a good authoring program
within our budget. right now the newsletter is in Word but we've had a lot of problems
with Word so i'm seeking an alternate solution. i'd like Frame but again there isn't
enough money in the budget. i need a good option that is $500 or less...i'm trying Publisher
now too but not enough functionality... -
IO assigned with Asset,but not coming at the time of PO creation
Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1 Depreciation - IFRS (INR) 1 0L
15 Income Tax Act 0
20 Depreciation - Indian GAAP (INR) 3 1L
30 Depreciation - IFRS (USD) 0
31 Depreciation - Indian GAAP (USD) 0
In ACSET-Account assignment:
for dep area-20
CAUFN Internal Order * Generic Trans. Type 02 Depreciation Run
KOSTL Cost Center * Generic Trans. Type 02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regardsHey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
Message no. AA565
Diagnosis
The asset to be posted does not manage parallel depreciation area 31, or
transaction type that you are using is limited to certain depreciation
areas, and does not contain depreciation area 31. This is incorrect.
System Response
Posting is rejected.
Procedure
Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards -
I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addresses.
I tried Peggy's List > Select All > Copy > Paste into an AW spreadsheet suggestion.
In my case, pasting into the spreadsheet lost all text formatting (mostly text set to bold). The results of formulas were pasted, and checkboxes were pasted as "on" or "off". The DB did not contain any pop-up menus or radio buttons, but I expect they would transfer as a number showing the list position of the chosen item.
Pasting the copied List view data into a Numbers table gave a result similar to that with AppleWorks. I selected B2 as the target cell (for top left cell of the pasted data) to avoid any effects of posting into a header row or column. Bold and regular text formatting looked the same as it had in AW's List view.
Based on that, I'd slip the 'paste into an AppleWorks Spreadsheet step, and paste directly into a Numbers Table.
Regards,
Barry -
After the new project by importing PPT release, how to achieve the release of the demo mode SWF, but not now only Click to continue?
Note:Captivate 5.5
Thks通过导入PPT新建的项目发布后,如何实现发布演示模式的SWF(自动播放),而不是交互模式的SWF(只能点击才能继续)?
-
Tomcat gives 404 with Netscape, but not IE
Why would I get a 404 for an application with netscape but not with ie?
I am using Tomcat 5.5.
Is there something special that I need to do for each browser?
Thanks in advance
BurtWhy would I get a 404 for an application with netscape but not with ie?
I am using Tomcat 5.5.
Is there something special that I need to do for each browser?
Thanks in advance
Burt -
I get sound from Youtube with Safari but not with Firefox
I get sound when using my MacPro with Safari but not with Firefox.
Did you check the volume setting in the player to make sure that the sound isn't muted?
You can try to clear the Flash local storage.
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Flash Local storage settings Help:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html -
My bank id works with IE but not in Firefox, even if I run without extensions. What is the problem?
Make sure you are using the correct user name / password.
https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message -
I am travelling for a year. I have my iPod touch 4g with me, but not my MacBook. Is there a way I can update to IOS 5 without losing my music,apps, photos..
Yes. get a computer with iTune 10.5 and:
- Transfer iTunes purchases to the computer:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other stuff using a third-party program like one of those discussed here. Most are good for music. It is harder to find one for other stuff like synced photos.
Copy music from Ipod to new computer...: Apple Support Communities
- Connect the iPod to the computer and make a backup by right-clicking on the iPod under Devices in iTunes and selecting Back Up
- Restore the iPod from backup and sync as neccessary. -
my apple ipad is disabled and saying connect to itunes. i tried to connect with itunes but not responding
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Maybe you are looking for
-
I have a red light coming from my headphone jack. In the sound output, the only thing there shows optical digital output, though nothing is there. It started when I dropped the computer, and now the internal sound will not work. I tried to spin the t
-
Solution for Overlapping dates
Hi I am looking for an easy solution the problem described below I have 4 records under party key and PartyKey account id taxtype date start date end 123 145 100 01/01/2001 12/31/2002 123 145 100 05/01/2001 05/31/2001 123 145 100 01/01/2002 11/30/200
-
Why is flex time being so slow?
I'm editing a group of 16 drum tracks for a 12min song. It's quite full on but flex time has been handling it well up until the last 2 or 3 minutes of the song. Now every time I place a flex marker, I literally have to wait over 30secs for Logic to l
-
Thanks, that got rid of the error message, but my wifi is still off and the button is "grayed out" won't let me turn it on. The message says "location accuracy is improved when Wi-Fi is turned on". Can anyone tell me how turn it back on?
-
Why won't my IMac Mid 2007 not work with ANY Microphone?
So I have recently received an IMac (Mid 2007) model that is used from my uncle. It is in GREAT condition with one flaw which I found out during a skype call. The mic didnt work. So I opened preferences, went to sound, went to input and saw that it w