Probelms while replicating Data Source and transport into test system

I find the following error messages whilre transporting into test system.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Mapping between data source 0EC_PCA_1 and source system is inconsistent.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
any ideas please..........
Enhanced the Extract structure and activated the data source in Source system
Replicate the Data source in BI and install the Infosource through BI Content activated and transport them to Test system.

Hi,
1.First transport the data source from R/3 dev to R/3 quality
2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you data source may not appear)
3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
activate these info objects and collect in another request
4.transport these info objects from BI dev to BI quality
5.transport entire data source to bw quality.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

Similar Messages

SM37 - "pause" V3-update job while importing data source and extract struct

Hi
Insted of deleting an hourly schedulated V3-update job and the recreating it (after a import of a extract structure and a data source) I came to think about whether it is possible to, kind of, pause the job that I otherwise would delete and recreate.
Is this possible some how?
My thought:
1. Find the job in released status.
2. Select the job and change it (top menu Job-->change)
3. Change the scheduling to some day in the future
4. Change job status from released to scheduled
5. Import the extract structure and data source.
6. Change the schedule job back to hourly run.
7. Now the job should run on hourly basis again....
By the way: what do I import first, the data source or the extract structure?
Thanks in advance and kind regards,
Torben

We did delete and recreate...

Exit Fm is not to CMOD project but transported to test system

Hi.
I have a enhancement MWMIDO08 with contains function module EXIT_SAPLLMDE_002 and which incldes program ZXLIDU10.
I made my necessary changes in the include program and transported to test system, without creating any CMOD project.
But my changes are working fine in test test.
Can you please suggest me, what to do now? if i want create a CMOD project now and add the function exit into it. and resend the new request to test system.
Does it create any problem.

This sort of thing can happen if someone has assigned a CMOD project to the enhancement containing the user exit before.
First check in SE16, table MODACT with MODACT-MEMBER = 'MWMIDO08', then MODACT-NAME will give you the existing project that is already assigned to enhancement MWMIDO08
If there is no entry in MODACT then you can safely create another project and assign the enhancement to it, activate and transport.
If already there is an entry in MODACT, you need to check if the same entry exists in your QA and Prod systems, to verify if someone already transported it. If it is not transported you need to deactivate / activate the project and transport that project again.
No this should not cause any problem and I can tell from experience having done same thing before.
Best regards,
Vishnu Tallapragada

Data source and attribute list transport

Hello gurus!
How can we transport data source and attribute list to another system?
In IMG system writes "Transport is not required".
Best regards,
Artur Litvinov.

Hi Artur
Attribute sets can be transfered thorugh RFC connection. Create the RFC of the source system in target system, then import the Attribute sets using the option "Transfer of Attribute Sets from Other System " tcode CRMD_MKT_TOOLS - Expert Tools.
Hope this will help
Rgds
Mallikarjun

Error while activating data source in BI

Hello Team
I am facing issues while activating data source. I followed following steps .
a)First i created my target
b)Then i made my Primary key as info provider
c)Then i created one source system under file.
d)Then i went to data source and created one application component
e)In this application component i created my data source
f)In this data source i imported my file and all the settings. Now when i am checking then it is not giving any error . But when i am trying to activate it it is giving error . Please find the supporting screesnhots . Can anyone please suggest me as to what is going wrong .

Hi,
Check the gateway settings for
Gateway Host
Gateway service
Also check the UDC connection information.
Check these links:
1 - http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
2 - http://help.sap.com/saphelp_srm40/helpdata/es/54/ddfb3ff778ed28e10000000a1550b0/content.htm
3 - https://encrypted.google.com/url?sa=t&source=web&cd=7&ved=0CCwQFjAG&url=http%3A%2F%2Fwww.bi-
expertonline.com%2Fdownloads%2FSchroeder0604.doc&rct=j&q=ud%20connection%20in%20sap%20bi&ei=WMDnTdm_E4ruvQOEzZWcDg&usg=AFQjCNGvqKuoTq9kypNMNGhis8WrZ-gFCg&cad=rja
Let us know in case the issue still persists.
Debanshu

Create a ReportingServices data source and upload to a data connection library

I have installed reporting services 2012 in SharePoint 2013 integrated mode. I need to create a report data source and upload it to a data connection library using
C#.
As I know it uses the ReportingServices2010 class but I cannot explore a reporting server url.
There is a ReportingServices2010.asmx file in the 15 hive though.
Also it works fine when I manually set the data source.

Hi,
The following materials would be helpful:
Inserting Data Connections into a SharePoint Library
https://social.technet.microsoft.com/Forums/en-US/df79dce5-fd92-4506-af4e-11127cb0d655/inserting-data-connections-into-a-sharepoint-library?forum=sharepointdevelopment
Programmatically exporting reports from SQL 2012 Reporting Services
http://stackoverflow.com/questions/12199995/programmatically-exporting-reports-from-sql-2012-reporting-services
Report Server Web Service Endpoints
http://msdn.microsoft.com/en-us/library/ms155398(v=sql.110).aspx
Best Regards
Dennis Guo
TechNet Community Support

Error while activating Data source

Hi,
I hit an error while activating data source with adapter 'WEB_PUSH web service'.
The error message is 'Generation of conversion exists and PSA update ...' with details 'Error generating Web service /BIC/CZZZ_0010000100 ...' and 'Error when activating DataSource ZZZ_001'.
I can't find much detail on this error.
Has anyone hit this error before and if you did can you please let me know what to check?
Thks & Regards,
Bbee

Hi,
I am having the same problem. Have you been able to solve the issue since you posted this last year?
Thanks,
TCT

System Throws short dump while executing data source 2LIS_11_VASCL in RSA3.

Hello Experts,
I got short dump while executing data source 2LIS_11_VASCL in RSA3.
The details are as follow.
When importing object "MC11VA0SCL_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 567.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
I have checked source and target fields and those are of same length and data type.
Could you please give some points why this short dump occurs.
Thanks
Konda Reddy

Hi,
This error is not between BI and R/3. It is within R/3. You may have setup data and then modified the datasource.
Delete setup data, generate your datasource again. Setup data and try again.
If you are on a live system with data setup after a downtime and you do not want to delete it, then bring your datasource to the original state when you setup data and pull data.
Cheers....

Not enough memory for Data Provider-Error while creating Data Source

Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.

Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object.

Mass collection of data sources in Transport request.

Hi All,
I want to capture the data sources which are available in RSA5. It is already activated and captured in Transport Request. But the Transport request was deleted by somebody.
I want to re-capture the activation of data sources which are there in RSA5. I want to collect 90 data sources in one Transport request.
Can you please guide me a easy way to capture all the data sources in transport request.
Thanks.

Hi,
you might be able to create a new Transport request and add the datasources manually.
check out the table roosource for the sources. you can find your's by filtering on tstpnm.
add the sources with object 'R3TR' and subobject 'OSOA'.
regards
Siggi

Excel data source and the use of add command

HI, Looking for suggestions on how to work with multiple inputs that cannot be joined directly. Here's the background.
The Report currently reads in two different Ecel files and uses 3 SQL commands to query an Oracle Database. I need to join the 5 data sources and am having issues with the 2 excel files. In one file I need to be able to derive a field based on another column in the file In order to create the join condition to the SQL commands. I'd equate this to a case statement in SQL, but how goes one do that using the 'add command' feature? What is the syntax?
Next I would need to join (left outer) the two excel files using two fields from file A (a1, a2) and 3 fields from file B (b1,b2,b3), where a1=b1 and b2 <= a2 <= b3 when rows from A exist in B. If row A does not exist in B then we still want it in the report and available to left outer join to the 3 oractab data sources.
runtime is also a concern.
Any Suggestions?

hi Elena,
in this case the use of subreports is not recommended. that's because you're exporting to excel and you need data in columns across the report. subreports will not, unfortunately, give you what you need.
this would bring you back to joining the datasources. what i would recommend is looking into using 'oracle database link' to link your oracle db to excel files. here's one article as an example but you may be able to find a better one. if you have questions on this please ask them on an oracle forum as the syntax that you need will be database specific.
a lot of databases have this type of technology which allows you to create a view to other data. sql server has 'linked servers', sap hana has 'smart data access'. essentially you are creating a non-materialized view to the external data. then this view is available on the main oracle server where you established this connection. this should be a lot easier than trying to bring a bunch of command objects together off independent datasources inside of crystal.
-jamie

Generic Data Source and InfoPackage Data Selection

Hello, I'm trying to extract data from a generic data source (composed of a view joining 4 tables) using the Data Selection Criteria in an infopackage. Sometimes the selection criteria is ignored and more data is pulled than expected. The number of selectable items in the generic data source has been reduced (in case this was an issue) and for a short time the infopackaged pulled the expected number of records. Then another change was made to the generic data source and the problem returned. In any case, the transported generic data source does not work in the target system either. I'm not sure what is causing this to happen. Any ideas??? BW 3.5.
Regards,
Sue
Message was edited by: Sue and Enrique
Ramesh P

Hi,
Some of the datasources will not have default Infopackages for them.You can create the infopackages according to the requirement.There is no big deal for creating Infopackages.You can go ahead creating them.
Regards
Karthik

Data Source And Info Source

Hi Experts
Can anyone tell technical difference between data source and info soure ? Where data source will be and where will be info source .
Kumar

Hi Kumar,
DataSources include extraction source structures and transfer structures. Data is staged in the extraction source structure and the transfer structure, and transferred into the BW system by ALE or tRFC.
An InfoSource is always a quantity of Info Object that logically belong together. The structure in which these are stored is called a communication structure.
There are basically two types of InfoSources.
InfoSources with flexible updating
Info Sources with direct updating
suresh

Export Data Sources DEV Transport to Acceptance

Hi Friends I am having a Export Data Source 80VELEXT created in Development System. When I transport that Datasource to Acceptance. It is not getting activated. I checked in RSLOGSYSMAP Table. I do not see the DB4CLNT120 --AB4CLNT110 Check mark. Is it required to be ticked to activate this. But when I consulted MY SAP Basis team they told it is not required to be checked. They told only D53CLNT120 -- A53CLNT120 ECC - ECC is only required. Please help me how to activate this Export Datasource in Acceptance.
Thanks
Soniya Kapoor

Hi Ravi, Please tell me exact step where you want me to change the source system to your Acceptance system Is it in the table RSLOGSYSMAP. OR where. I just created these datasources IN BI and nothing else is required no dtp no trans nothing. Just the Datasource and I need to transport this.
Please help
Thanks
Soniya

Short dump while generating data sources

Hi all,
I've created a source system for MSSQL database. Now, when I'm trying to Generate the Data Source from SQL into BW using 'Select database tables' option in the Source system and execute it for a table (SAMTEST) in the SQL database, the program terminates with a dump as follows.
Error in ABAP application program.
The current ABAP program "RSDL_META_UPLOAD" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLRSDBC ", the following syntax error occurred
in the Include "LRSDBCO01 " in line 58:
"The field "RSDBC_C_RSADMIN" is unknown, but there are the following fi"
"elds with similar names: "RS_C_RSADMIN" and "RSDRO_C_RSADMINA"."
Author and last person to change the Include are:
Author "SAP "
Last changed by "SAP "                                                -
I think I've missed some custom settings to be done. I'm clueless. Can anyone help in this regard.
Thanks in advance,
Sam

This is a bug in the code. Check oss note 729243 -
"Symptom
The attempt to load data from an external database results in a runtime error with a syntax error in the SAPLRSDBC program.
Other terms
DB Connect, DBC, DBC SYNTAX_ERROR, dump, short dump
Reason and Prerequisites
This is due to a program error.
The LRSDBCO01 include is inconsistent in the corrections of the currency translation for DB Connect in BW 3.5 Support Package 13. This results in the dump with a syntax error in the SAPLRSDBC program.

Probelms while replicating Data Source and transport into test system

Similar Messages

Maybe you are looking for