Problam with FSV

Dear Experts-
I am defing the FSV in that screen i have
ASSETS
LIABILITIES
NO TEXT EXIST----
NET RESULT PROFIT
NO TEXT EXIST------NET RESULT LOSS
NO TEXT EXIST ---P+L RESULT
NO TEXT EXIST----NOT ASSIGNED..
IN this i have assigned all asset related gl accounts under different sub-group under assests....it is ok...
IN Liabilities also i have assigned liabilities related GL accounts...it is ok?
In Third line...NO TEXT EXIST----
NET RESULT PROFIT.....i put cursor on that and click on create item it is not creating under that, it is creating below that? it is standard beheviour or any mistakes i did?
how ever i have created sub group and assigned GL accounts......
At the time of executing the report...if suppose
ASSETS -
100 RS
lIABLILITIES ARE .....200
i AM GETTING ON ROW IN REPORT THAT IS A0023  that is the difference between assts and liabilities?
It is correct to get that field?
If suppose there is no assets only liabilities we have...i am getting the third row ....No test exist with difference amont??
Pls tell me basic fundamental os FSV?  I am facing lot of problam with this,....pls tell basic fundamental of this behaviour.....
Thanks
Chandu

Thank you so much...
I need to change the description of the forst two nodes or not?
How can i show present year Profit/loss under Liabilities side....beacause there is no GL account for profit or loss...how can i shoe that..pls guide me....
In the report we are getting difference betwwe assets and liabilities...this is standard functinality?
Please tell me.........
Thanks
Chandu

Similar Messages

  • I have a problame with the itunse

    hy, i have a problame with the itunse. i cant find a ringtone ctegory.
    i dwonload a ringtone app, and i create a one, but i can't use it becouse i dont find the ringtone ctegory in the itunse. please help me.
    thake u.

    Hello, Sergei Barabash. 
    Thank you for visiting Apple Support Communities. 
    I see your device displayed a Connect to iTunes Graphic and upon restore you received an error 14.  Here are the steps that will help you troubleshoot this issue. 
    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Error 1015 might happen after making unauthorized modifications to iOS, also called "jailbreaking."
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Cheers,
    Jason H. 

  • Problam with Imessage

    hi!
    i have problams with imessage,
    first it happens many times that i try to send a message and the phone can't send the message with this application and sent it normal.
    another problem at the last week i sent a message with IMessage and it was written in my phone that it arrived the destination but it never arrived and another time it happened that someone else sent me a message and i never recived it.
    is there a problam with the IMessage?
    is there something i can do to fix this problams?
    thanks in advance
    Gasti

    No. You have to use an email address. You can use your Apple ID email address and you can also add other email addresses. To add go to Settings>Messages and add the email address to the the Receive At location.

  • Problam with JFileChooser.

    Hi All,
    I am using JFileChooser with .pdf and .xls extension. when i created new file and do saveAs function it saving properly.(suppose i do temp.pdf). now i am trying to do Save function (suppose i do abc.xls) immediately after SaveAs but its saving file as abc.pdf instade of abc.xls.
    i guss its problam with extension selected while saveAs , any body know how to clear pdf \ xls extension from JFileChooser.
    regards,
    Govind.

    Got the same issue with an iPhone I got today. I have no problem using the earphones and that works alright but no sound comes from the speakers, neither ringtones, lock sound or any of the other sounds.
    I have restored it twice with no luck but I have read about some sort of hardware problem that makes the phone believe that the earphones are plugged in so that might be it. Still haven't found a solution though.

  • Problam with original apple ringtones

    I've got a problam with my Iphone 4:
    after downloading the latest update, the original Iphone ringtones seems cut or something.... any solution? thanks., after downloading the latest update, the original Iphone ringtones seems cut or something.... any solution? thanks.

    Got the same issue with an iPhone I got today. I have no problem using the earphones and that works alright but no sound comes from the speakers, neither ringtones, lock sound or any of the other sounds.
    I have restored it twice with no luck but I have read about some sort of hardware problem that makes the phone believe that the earphones are plugged in so that might be it. Still haven't found a solution though.

  • Problams with my OCZ PC 6400 4 GB ! plz help me

    Hay , my name is Elad !
    here is my problam:
    I have MSI Platinum Combo P35
    and i got OCZ PC 6400 Platinum Edition 4GB DDR2 800 MHZ CL4 , 4 stiks of 1 gb each one (4X1024)
    How ever when i attechd the 2 stiks, 2GB the pc work pine and no problams !
    But when the 4 stiks are Plug the pc is stuck/freeze EVEN befor the Windows show up
    in same causes the Windows up and stuck after few minuts !
    i try to set up the memoy Volt to 2.00 and still it dosnet work ! (OCZ Recommend 1.9-2.2 V )
    What can i do ??
    I need to work with 4 GB and i want the OCZ, i dont like others memory kinds !
    I know the windows show only 3.3 GB, but its pine for me !
    plz try help me to slove my problam !
    My system:
    Intel Core 2 Duo E8200 2666 Mhz @ 3300 Mhz 6MB
    MSI P35 Platinum Combo 7.1
    OCZ Platinum Edition 4GB (4x1024) DDR2 800 MHz
    Inno3d GeForce 9600 GT 512mb OC
    SEGATE 250GB 16MB S2
    Thenk For Help
    Elad

    Quote from: MighT on 14-March-08, 09:44:45
    Intel Core 2 Duo E8200 2666 Mhz @ 3300 Mhz 6MB
    I had the exact same problems you describe when I added 2 more GB to the pair I already had. In my case the culprit was a faulty module. It was fine after an RMA and has been ever since.
    I'd remove first of all every OC you have and check that the computer can boot with every single module. Test them one at a time. This way you'll know if you have a faulty module to blame.
    If every module is fine, try to configure them by SPD. Give the modules say 1.9v, so you have a safe margin (if your modules are the same as mine, they are SPD-set to 5-5-5-15-23-42-4-6-5-5 @ 1.8v when running at DDR2-800 speeds). Be sure that you drain capacitors after each change in the setup and clear CMOS if you feel it necessary.
    I have 4x1GB of these modules and they pass 5 and a half hours of Memtest86+ without errors at DDR2-800 with 4-4-4-15, pretty tight subtimings and 2.0v, so they are not that tricky.
    Luck 

  • A problam with charging

    i got iphone 5 with ios 7.0.4 and an Authentic charger but after an hour it shows that it was charged by only 1%
    how can i fix this problam?

    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Problam with MediaPlayback component

    I am using MediaPlayback component. it is showing one small icon  on top right . when it is click MediaPlayback in full screen mode . what is  that icon & how remove that icon.

    Got the same issue with an iPhone I got today. I have no problem using the earphones and that works alright but no sound comes from the speakers, neither ringtones, lock sound or any of the other sounds.
    I have restored it twice with no luck but I have read about some sort of hardware problem that makes the phone believe that the earphones are plugged in so that might be it. Still haven't found a solution though.

  • Problam with itun account

    why i cant get free i tune account

    Got the same issue with an iPhone I got today. I have no problem using the earphones and that works alright but no sound comes from the speakers, neither ringtones, lock sound or any of the other sounds.
    I have restored it twice with no luck but I have read about some sort of hardware problem that makes the phone believe that the earphones are plugged in so that might be it. Still haven't found a solution though.

  • Problam with orders

    Dears Experts,
    while we create process order confirmation the below message apper
    "No prices could be determined for object Business proc. operating concern/Business process"
    could you help me to solve this problam
    Regards,

    Hello,
    Check standard cost estimate for the material involved.
    cheers.
    Santosh

  • Problam with magic bullet instant hd advance

    after i changed my sd video to 1080p and added magic bullet instant hd advance i set it so that it renders in h.264 codecs but every time i tryed i got this message.

    The H.264 format only permits a limited, constrained set of frame sizes.  In After Effects CS4, these constraints were communicated in the  Comments field of the H.264 Export Settings dialog box, and you must follow those instructions or else get the error message that you got.
    In After Effects  CS5, if your settings don't match one of the sets of settings allowed  by the H.264 specification, then a warning icon in the Output  Module Settings dialog box appears, and After Effects tells you  what it's going to do to make the video fit.
    The F4V format (which contains video encoded using H.264) has a different set of constrained sizes, including the 1920x1080 size that you're looking for. And other formats (like QuickTime) aren't constrained in this way at all. So, you might have better success choosing a different output format, if you need that output frame size.

  • Some problam with 127.0.0.1 connection

    hi everybody
    i am using oracle db 10g express edition .
    after i was installing the software on linux ubuntu 8/4 platform and i am trying to connect this adress i get "Firefox can't establish a connection to the server at 127.0.0.1."
    there is something to do ?
    thank you all

    Oracle 10g is not IPv6 aware. Comment out any IPv6 entries in /etc/hosts, and make sure you have a normal VPv4 entry for your hostname like
    192.168.1.101 hostname.domain hostname.

  • Problam with the iphone 4s no image just icon i cant delete

    Hi
    In a folder on my computer iPhone All images that appear on the iPhone and also be copied to a computer today I saw when I looked in the folder of the hard disk icons that take place and you can not delete them!
    Is there a solution?
    Thanks to everyone for the help:-)

    Is your phone still recognized in iTunes?
    What happens if you're trying to sync? Does the sync process start and does it show the progress in the status bar?
    Did you check this article to make sure iTunes can sync your ringtones?
    How to Make Custom iPhone Ringtones for Free

  • Problame with Runtime.exec()

    Hi i am having one problem using Runtime in windows
    When Using Runtime.exec to open any file which is inside a folder having a white space character in its name, i am not able to open the application. I am getting an error messsage that file cannot be found.
    Following is the code
    import java.io.IOException;
    class OpenTest{
    public static void main(String args[]){
    //Folder "dd dd" having white space embedded in its name
    //so the error comes
    String sRegFilePath = "E:\\AAA\\dd dd\\dd.xls";
    try {
    Runtime rt = Runtime.getRuntime();
    rt.exec("cmd /c start "+sRegFilePath,null,null);
    catch(SecurityException se) {
    System.err.println( "SecurityException starting process!");
    catch(NullPointerException ne) {
    System.err.println( "NullPointerException starting process!");
    catch(IndexOutOfBoundsException ioobe) {
    System.err.println( "IndexOutOfBoundsException starting process!");
    catch(IOException e1) {
    System.err.println( "IOException starting process!");
    }

    Hi
    Do this
    String sRegFilePath = " \"E:\\AAA\\dd dd\\dd.xls\" ";

  • Problam with fla export to Quicktime (mov)

    Hi,
    I am using the Filters - blur effect  animation in Adobe flash, then export Quicktime (mov) format, but  animation connot come smoothly in blur effect Areas in mov format. other  animation area
    what is the solution?
    Ramachandran
    [email protected]

    Ramachandran-
    This forum is for Flash Catalyst, and not Flash Professional. You need to repost your issue in the Flash Professional forum.
    Chris Griffith
    Adobe Community Professional

Maybe you are looking for