Problams with my OCZ PC 6400 4 GB ! plz help me

Hay , my name is Elad !
here is my problam:
I have MSI Platinum Combo P35
and i got OCZ PC 6400 Platinum Edition 4GB DDR2 800 MHZ CL4 , 4 stiks of 1 gb each one (4X1024)
How ever when i attechd the 2 stiks, 2GB the pc work pine and no problams !
But when the 4 stiks are Plug the pc is stuck/freeze EVEN befor the Windows show up
in same causes the Windows up and stuck after few minuts !
i try to set up the memoy Volt to 2.00 and still it dosnet work ! (OCZ Recommend 1.9-2.2 V )
What can i do ??
I need to work with 4 GB and i want the OCZ, i dont like others memory kinds !
I know the windows show only 3.3 GB, but its pine for me !
plz try help me to slove my problam !
My system:
Intel Core 2 Duo E8200 2666 Mhz @ 3300 Mhz 6MB
MSI P35 Platinum Combo 7.1
OCZ Platinum Edition 4GB (4x1024) DDR2 800 MHz
Inno3d GeForce 9600 GT 512mb OC
SEGATE 250GB 16MB S2
Thenk For Help
Elad

Quote from: MighT on 14-March-08, 09:44:45
Intel Core 2 Duo E8200 2666 Mhz @ 3300 Mhz 6MB
I had the exact same problems you describe when I added 2 more GB to the pair I already had. In my case the culprit was a faulty module. It was fine after an RMA and has been ever since.
I'd remove first of all every OC you have and check that the computer can boot with every single module. Test them one at a time. This way you'll know if you have a faulty module to blame.
If every module is fine, try to configure them by SPD. Give the modules say 1.9v, so you have a safe margin (if your modules are the same as mine, they are SPD-set to 5-5-5-15-23-42-4-6-5-5 @ 1.8v when running at DDR2-800 speeds). Be sure that you drain capacitors after each change in the setup and clear CMOS if you feel it necessary.
I have 4x1GB of these modules and they pass 5 and a half hours of Memtest86+ without errors at DDR2-800 with 4-4-4-15, pretty tight subtimings and 2.0v, so they are not that tricky.
Luck 

Similar Messages

  • What calender syncs with iphone and works on windows xp plz help

    plz

    Then it won't work as your calendar application. It will still handle email.
    Currently, the only way to sync your calendar with a XP machine is via Outlook 2003 or 2007

  • Problem with sle4428 smart card ... PLZ help me!

    hi everyone
    I must use sle4428 .but I have problem with reading and writing on it!
    when i send my write ADPU command to card it response with 90 00 which means that it write on the card correctly(at least that's what i think it should mean!)
    but when i send my read ADPU command it doesn't read the right thing although it response with 90 00 !
    these are my write and read commands:
    ---------------------------------- Connect ----------------------------------
    con
    Connect (OK) : Command executed correctly
    ---------------------------------- Get ART----------------------------------
    pon
    Power On (OK) : Command executed correctly
    DATA = 3B00
    ---------------------------------- Write Command----------------------------------
    apdu ffd1001b01cc
    APDU (OK) : Command executed correctly
    SW1 SW2 : 90 00
    ---------------------------------- Read Command----------------------------------
    apdu ffb2001b01
    APDU (OK) : Command executed correctly
    DATA
    0000 FF
    SW1 SW2 : 90 00
    as you can see I write cc in that spesefic address but when i read that address the card returned FF. (It always returns this value.)
    I'll appreciate any help

    hi shili
    you must verify pin, and then write to card.
    use this command for verifying pin[present_code_memory_card]:
    FF 20 00 00 02 FFFF
    FFFF is default pin.
    if correct code has been presented to to the card,
    in response message error counter is FF [ first bytes of response].
    use this command for writing 5152 to address 00aa:
    FF D0 00 AA 02 5152
    read command :
    FF B2 00 AA
    in each command, set Le to appropriate value.
    best regards,
    siavash

  • I just got my macbook pro 11 have problems with setting up audio interfaces!! plz help me

    So here it goes! i properly installed the drivers for my Emu tracker pre usb and for my saffire pro 40 (firewire) . Both audio interfaces show up in the system profiler under their respective category (firewire and usb bus) But i cant get them to apear in system preferences sound menu neither on logic!!  my saffire pro doesnt even lock with the mix control software provided! what can be the problem ? how can i solve it ? I really need your help!!  
    (everything works perfect on my i mac 27" 10.6.2 snow leopard).

    I doubt you will have any virus, must never say never
    Free for Home use
    Sophos
    http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition.aspx
    also free  from app store Clam XAV
    http://www.usatoday.com/story/tech/columnist/komando/2013/02/14/tech-myths-mac-s oftware-megapixels-camera/1910521/
    Your Battery will not last long if you keep it on full brightness.
    see this read
    https://discussions.apple.com/thread/964075?start=0&tstart=0
    http://support.apple.com/kb/PH3738
    http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=Battery%2095%25
    Open LaunchPad/Other/Activity Monitor/CPU
    and check if any of your  processes are high% CPU  if so select it and press the Red Quit process Button
    Mac101 may assist you
    http://www.apple.com/support/macbasics/

  • Help with turnig off nano and short songs (PLZ HELP!!!)

    i have no idea what any of this stuff is with discussions but i need help.
    1) my iPod won't turn off. I have held down the pause/play buttin and have also left it alone on pause for over an hour and it still wont turn off. all other buttons work just fine. the play/pause button still plays and pauses when i push it but it just wont turn off.
    2)some of my songs are cut short by about 30 seconds at the end. down at the bottom of my iPod, it says the full time, but when it has about 30 seconds left, it goes to the next song
    PLEASE HELP!!!! I HAVE NO IDEA WHAT TO DO!!!!!!!
    MA005LL    

    i have the same problem, i can't turn off my nano, when i trying to turn it off it take no effect(pressing a play\pause button for 10 seconds wont't turn it, when i take off my finger from button it just "pause"). I'm tryed to fix this problem by reinstalling ipod update, reset from ipod menu have no effect, when i go to ipod test menu i reset it... guys plese help me can't stand when something goes wrong. Thank you for replying

  • Need help with uploading to youtube??? PLZ HElP

    When I publish/share a youtube video it says authorize so i go and then complete authorization i do that too then gives me a error which says Your authentication could not be verified. Kindly Try again also It appears a windows which ask to accept like for letting premiere elements to connect with my youtube account which I press accept and gives me like a url error what do I do? also if you guys cant solve this is there a phone number for support Much appreciated and thanks!!! also its adobe premiere elements 12!!!

    HawkEye911
    In situations such as these, the first order of suggestion is to try to take your Timeline to a file saved to the computer hard drive.
    And, then upload that file from the computer hard drive to YouTube at the YouTube web site.
    You put us and yourself at a disadvantage by not posting the version of Premiere Elements being used and the computer operating system on which it is being run and project details. For now, I will assume Premiere Elements 12 on Windows 7, 8, or 8.1 64 bit.
    Then,
    Publish+Share
    Computer
    AVCHD
    and Presets = YouTube Widescreen HD
    you can customize that preset further under the Advanced Button/Video Tab
    Once we know that works, we know that your account is working. You will be using the same account at the YouTube web site as you are using in Premiere Elements 12 Publish+Share/Social Websites, right?
    Depending on the results, we may need to know more about
    project preset
    properties of source media
    duration of the Timeline content
    Please update us on your progress.
    Thank you.
    ATR

  • Required help with writing to a file.. urgent plz help

    Hello Everyone, 
                             I am using the following code to write data to a particular file.. 
    I have 2 wfms, pressure and torque, the pressure is a simple one...
    THe torque is bit complex, the operator has to press the "Start/Stop Torque DAQ" button and then select a filename... Next, he has to press the "Run/Stop Test"
    button to finish 1 set of test and then write to the next available file name without pressing anything else... 
    I tried connecting an OR gate to the enable/reset ports, but it didn't work... Can anyone please suggest me how to do this??
    Now on LabVIEW 10.0 on Win7
    Attachments:
    RCD_v002.vi ‏129 KB

    Hh Crack Jack,
    Try this...
    <<Kudos are welcome>>
    ELECTRO SAM
    For God so loved the world that he gave his one and only Son, that whoever believes in him shall not perish but have eternal life.
    - John 3:16

  • HT1430 i have updated my iphone 3g but now its not activating with the sim card i placed in. plz help

    i have updated my iphone 3g and now the phone is not activating

    Insert a valid, working SIM from the carrier it is locked to.

  • Problam with FSV

    Dear Experts-
    I am defing the FSV in that screen i have
    ASSETS
    LIABILITIES
    NO TEXT EXIST----
    NET RESULT PROFIT
    NO TEXT EXIST------NET RESULT LOSS
    NO TEXT EXIST ---P+L RESULT
    NO TEXT EXIST----NOT ASSIGNED..
    IN this i have assigned all asset related gl accounts under different sub-group under assests....it is ok...
    IN Liabilities also i have assigned liabilities related GL accounts...it is ok?
    In Third line...NO TEXT EXIST----
    NET RESULT PROFIT.....i put cursor on that and click on create item it is not creating under that, it is creating below that? it is standard beheviour or any mistakes i did?
    how ever i have created sub group and assigned GL accounts......
    At the time of executing the report...if suppose
    ASSETS -
    100 RS
    lIABLILITIES ARE .....200
    i AM GETTING ON ROW IN REPORT THAT IS A0023  that is the difference between assts and liabilities?
    It is correct to get that field?
    If suppose there is no assets only liabilities we have...i am getting the third row ....No test exist with difference amont??
    Pls tell me basic fundamental os FSV?  I am facing lot of problam with this,....pls tell basic fundamental of this behaviour.....
    Thanks
    Chandu

    Thank you so much...
    I need to change the description of the forst two nodes or not?
    How can i show present year Profit/loss under Liabilities side....beacause there is no GL account for profit or loss...how can i shoe that..pls guide me....
    In the report we are getting difference betwwe assets and liabilities...this is standard functinality?
    Please tell me.........
    Thanks
    Chandu

  • I have a problame with the itunse

    hy, i have a problame with the itunse. i cant find a ringtone ctegory.
    i dwonload a ringtone app, and i create a one, but i can't use it becouse i dont find the ringtone ctegory in the itunse. please help me.
    thake u.

    Hello, Sergei Barabash. 
    Thank you for visiting Apple Support Communities. 
    I see your device displayed a Connect to iTunes Graphic and upon restore you received an error 14.  Here are the steps that will help you troubleshoot this issue. 
    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Error 1015 might happen after making unauthorized modifications to iOS, also called "jailbreaking."
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Cheers,
    Jason H. 

  • [915 Series] 915G-Combo with OCZ-DDR2-533/4200 no post - help!

    I was hoping one of you wonderful experts on this board might be able to help.  I just bought a pair of OCZ DDR2-RAM and am having trouble getting the system to recognize it.  Here are the specs:
    RAM specs:
     - 533MHz DDR2, unbuffered CL 3-3-3-8
     - 1GB (2X512) dual channel optimized gold kit
     - 1.8V 240pin DIMM
     - 2.2V EVP - OCZ's unique Extended Voltage Protection feature allows PC2-4200 modules to handle voltages up to 2.2V ±5%
     - OCZ part number:-OCZ25331024ELDCGE-K
    System specs:
        * CPU model and rated speed:-Intel Socket775 2.8GHzE
        * Not Overclocked
        * Motherboard and revision:-MSI 915G-combo
        * Motherboard Bios rev:-1.7 (latest)
        * Video card:-ATI X800XL
        * Power supply:-450W
        * Operating System:-XP Pro SP2
    My current Crucial DDR-400 PC3200 CT6464Z40B 2x512MB RAM runs without problems installed.  When I switched out the Crucial RAM and installed the OCZ DDR2-533 PC4200 RAM in the appropriate DDR2 slots (1 and 3), no go.  The system won't even post and I can't get into the BIOS.  I tried using even just one of the 512MB sticks, alternated sticks, and even tried just one stick in DDR2 in slot3 instead of slot1 - no go. My boot drives don't get accessed either as I had even placed a Memtest bootdisk in the floppy hoping it might be able to access that.
    I've been working over the last 24hrs with the very helpful OCZ folks but we havn't been able to get anywhere.  I realize that OCZ isn't technically on the 'tested and verified' DDR2-list for the 915G-combo board, but OCZ is a good name brand (up there with Crucial) and I went for the higher-end Gold-series (CAS3) so I figured it wouldn't be a problem.
    I've tried clearing the CMOS (no effect except to wipe out my bios settings).  I have a D-Bracket2 installed and it hangs when the upper right light is green with the rest red (according to the D-bracket guide, that means 'Memory Detection Test - will hang if the memory module is damaged or not installed properly'.  I can't imagine the RAM is bad - I have 2 matching ones to test (neither seem to work when installed by itself), and just got it brand new from Monarchcomputers yesterday evening in their retail box unopened.
    Per OCZ's advice, I was unable to manually set a CAS of 4 with my Crucial DDR installed (I could only manually set it to a max of 3), so I also test-tried a manual set of the BIOS memory timing to 3-4-4-10 while the Crucial DDR RAM was installed and then retried the system with only the new DDR2 installed in their appropriate slots (Crucial DDR of course removed).  Still no luck - the system won't get to bios and hangs at the Memory Test per D-Bracket2.  It won't even get to a point where it tries to access/boot from floppy so that I can't run MemoryTest from disk.
    Would anyone else out there recommend trying something else, short of going out and shelling out $140 for an ABit AA8-925X mboard that OCZ actually lists as compatible with their RAM?  My MSI 915G-Combo board has been flawless for me up to now and I'd hate to part with it just because it won't work with good OCZ DDR2 ram.  One thing I havn't tried is attempting to use an older BIOS version - I had flashed to the latest v1.7 bios prior to installing the DDR2 ram, so I've never actually tried any of the older versions.  Does anyone think this would be worth a shot?
    Cheers
    - James

    Thanks... I tried that.... still no go...
    I just got an email from OCZ techsupport (they had requested that I email them directly).
    "we have identified a problem with the PC4200 Gold DDR2 dimms, we need to get you a pair with reprogrammed SPD info on them. So we need to swap your kit out"
    They were very apologetic about it, and from what I can tell I don't think this happens a lot with OCZ ram...
    So that hopefully will be the solution to my problem.. I'm processing an RMA with them right now.. will let you know how it goes.. it's a 'relief' to find out that it most likely isn't my MSI-915G board's fault after all...
    Kudos to OCZ at least for getting back to me so quickly, even though it does suck to have my memory delayed again.. I'll post again when I get the replacement RAM and let you all know how it goes...  at least they've identified a problem and are willing to take care of it rather than leaving me hanging...

  • Problam with Imessage

    hi!
    i have problams with imessage,
    first it happens many times that i try to send a message and the phone can't send the message with this application and sent it normal.
    another problem at the last week i sent a message with IMessage and it was written in my phone that it arrived the destination but it never arrived and another time it happened that someone else sent me a message and i never recived it.
    is there a problam with the IMessage?
    is there something i can do to fix this problams?
    thanks in advance
    Gasti

    No. You have to use an email address. You can use your Apple ID email address and you can also add other email addresses. To add go to Settings>Messages and add the email address to the the Receive At location.

  • Problam with JFileChooser.

    Hi All,
    I am using JFileChooser with .pdf and .xls extension. when i created new file and do saveAs function it saving properly.(suppose i do temp.pdf). now i am trying to do Save function (suppose i do abc.xls) immediately after SaveAs but its saving file as abc.pdf instade of abc.xls.
    i guss its problam with extension selected while saveAs , any body know how to clear pdf \ xls extension from JFileChooser.
    regards,
    Govind.

    Got the same issue with an iPhone I got today. I have no problem using the earphones and that works alright but no sound comes from the speakers, neither ringtones, lock sound or any of the other sounds.
    I have restored it twice with no luck but I have read about some sort of hardware problem that makes the phone believe that the earphones are plugged in so that might be it. Still haven't found a solution though.

  • Problam with original apple ringtones

    I've got a problam with my Iphone 4:
    after downloading the latest update, the original Iphone ringtones seems cut or something.... any solution? thanks., after downloading the latest update, the original Iphone ringtones seems cut or something.... any solution? thanks.

    Got the same issue with an iPhone I got today. I have no problem using the earphones and that works alright but no sound comes from the speakers, neither ringtones, lock sound or any of the other sounds.
    I have restored it twice with no luck but I have read about some sort of hardware problem that makes the phone believe that the earphones are plugged in so that might be it. Still haven't found a solution though.

  • Bluetooth issues on MBP 15 Mid 2012 with SSD OCZ Vertex 4

    Hello,
    I work on MBP 15 Mid 2012 with SSD OCZ Vertex 4 and I have problem with my bluetooth (mouse sometimes is very slow, laggy, the same problem with keyboard, keys are working with a delay) Unfortunately  it happens only with SSD drive and when I have plugged oryginally, apple’s drive everythink it’s ok. Software, firmware are the latest, I tried each reseting (PRAM etc...) and nothing helped. Do you have any ideas?

    Same combination and same issue.  I see a thread about this here:
    https://discussions.apple.com/message/21659917#21659917
    My guess is that the SSD is causing interference with the bluetooth somehow.

Maybe you are looking for