Proble with tascam US122L and Logic

Logic looks like he don't see my tascam device,,,on the same computer I have no problem on that with GarageBand....Can anybody help plss..thx

Perhaps this thread will help you. I had the same problem and was able to make some tweaks to my system to get it to work.
http://discussions.apple.com/message.jspa?messageID=10244927

Similar Messages

  • SUGGESTION ON BEST External HD to work with Mac Air and Logic - for sample streaming.

    SUGGESTION ON BEST External HD to work with Mac Air and Logic - for sample streaming.

    huge storage, low cost, high quality, very small and portable.
    BEST FOR THE COST, Toshiba "tiny giant" 15mm thick  2TB drive (have several of them, lots of storage in tiny package)    $100
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48    /ref=sr_1_3?ie=UTF8&qid=1390020791&sr=8-3&keywords=toshiba+2tb
    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim perfect for use with a notebook
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s    r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    *This one is the BEST portable  external HD available that money can buy:
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
    http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr    _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
    Most storage experts agree on the Hitachi 2.5"
    Hitachi is the winner in hard drive reliability survey:
    Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

  • Tascam US-2400 with Mackie C4 and Logic

    Anybody using Logic with Tascam US-2400 (USB) control surface and a Mackie Control C4 plug–in controller (MIDI) at the same time?
    Wonder if there would be a conflict using both, but seems like a nice Logic setup if it could work.

    Typically, its not about if a piece of hardware works with LPX.. It's whether or not it works with 10.8.x and if the Devs have written drivers that are compatible with 10.8.x that really matters....
    In the case of Tascam, sadly, they don't have a good track record of providing support for newer OS X versions and instead just "end of life' their older products....
    You will see from the following thread that the problem caused by Tascam not providing updated drivers for Mountain Lion, affects other DAWs Like PT and not just Logic...
    http://duc.avid.com/showthread.php?t=342253
    As for the 2400 and ML 10.8.4 itself...
    At the moment, there doesn't appear to be anything new forthcoming from Tascam.... and they are not being overly helpful in regards to the non compatibility issues of the 2400 and ML 10.8.4 because as far as they are concerned they have "end of life"d that model...... Contact Tascam to register your wishes for a ML 10.8.4 driver.. Maybe if enough users do so, they might have a change of heart.. but based on their past history, I wouldn't hold my breath.
    A few users have reported that they got their 2400 working under ML 10.8.2 but when asked how, none have been forthcoming with any answers.. The majorityof 2400 owners have stated its basically a 'no go' in regards to things like Fader movement etc... even using HUI compatibility mode... under Mountain Lion and have either moved on to new hardware that is fully supported under 10.8.x or have rolled back to 10.6.8 and Logic Pro 9 or whatever other DAW they use that works under Snow Leopard.
    Finally, Apple made a mistake including the 2400 as a 'supported' hardware in the info for LPX and ML.... (They just copied the list over from the one they used with LP9 and Snow Leopard) They have since suggested that they will be updating the list and the 2400 will be removed from that list as Tascam are seemingly not intending to update their drivers for it any further....

  • Tascam 1884 and Logic Express 7.2.3 - Master Fader Issue

    I am currently having a slightly annoying problem between Logic Express and my Tascam 1884. Whenever I move the Master Fader on the Tascam, it changes the output of the currently selected track in Logic rather than Output 1-2 as it should and used to do.
    I opened up the package contents of Logic to check the control surface drivers to see if there was a new version available. The one installed in Logic for the 1884 was labled as v1.0. I checked on the Tascam website and there was an Application Specific driver for Logic labled as v1.10. I downloaded this and installed it in place of the v1.0 driver and started Logic up. I was greeted with an error message stating that the Control Surface Driver was outdated. To see the actual error message, go here:
    http://flickr.com/photos/ephraim909/454973721/
    Basically, it is stating that the "newer" version is outdated somehow. Is anyone else having this problem or have any idea what may be going on?
    15 in. PowerBook G4 1.5 GHz   Mac OS X (10.4.6)   1.25gb RAM

    Thank you for the response. However, there are a few things wrong with that idea. First of all, that path that both you and Tascam specify to place the bundle is no longer applicable. The place where all the bundles are now is actually in the package contents of Logic Express, where I specified that I placed it. Secondly, there is something wrong with the driver beyond installing it in that, my control surface will no longer install or work. Therefore I cannot just ignore the error message because if I do, then nothing works at all. Once again I appreciate the suggestion, but that doesn't seem to help in my case.

  • Problems with Presonus Firestudio and Logic

    I am having problems with compatability with my brand new Presonus Firestudio recording interface and Logic pro 8. I am new to logic but not to home recording, and i cant understand what might be the problem. When i use the firestudio with garageband it works easily. In the garageband sound preferences there are input AND output channels that the user can define. (i.e. you can set your input channels to come from the firestudio while the output channels go to the computer speakers or headphone jacks or whatever you define it as).
    From what i have seen in logic, there is only one option for your audio settings. when in preferences and under audio, there is a "device" setting in which you can define your audio device. Wheather this is input AND output for the program, i do not know. but the problem i am experiencing is that whenever i choose the firepod as the input device, no sound from logic will play from the speakers whatsoever. My first thought was that maybe ouput was going straight to the firestudio, but after plugging headphones into it this also did not work. Has anyone had success getting their firestudio to work in logic? if so let me know what settings you had to use, and how you got to moniter your input from from the firestudio via your computer.
    p.s.
    another WIERD problem i have run into, is that if i shut off the firestudio while logic is open, alot of times it will shut down my whole computer. i have never heard of this happening. what am i doing wrong?
    thanks!

    SydSeale wrote:
    The new beta drivers are now here...
    http://www.presonus.com/forums/showthread.php?t=3957
    ah, I was hoping to find my solution here, but alas the thread is gone...
    I recently bought a Macbook running Leopard, and am having difficulties with my PreSonus Firestudio Project thru Logic and Mainstage. I can get audio input and output just fine, but there's a ton of distortion/crackle. Kickstarting the sample rate seems to clear it up for a minute or two, but then the crackle comes back. The recorded tracks sound clean if I unplug the Firestudio, so apparently it's only in the monitoring stage?
    On the PreSonus board, they're claiming it's Apple who needs to update drivers for Leopard; PreSonus says the "Firestudio Project is Leopard compatible."
    still searching for some answers...

  • Any experience mixing with VRM box and Logic?

    I was interested in anyone's experience using Focusrite's VRM box and Logic.

    Someone mentioned the BSF2000. I have the same and it is very useful.
    In the default BSF mode there is no feedback into the sliders (they don't move with existing automation), however you can send up to 117 CCs, PCs and some other kinds of data on each preset from up to 16 MIDI chanels and Logic picks them all up with no problems.
    However, you can start the BCF 2000 in Logic Control mode, (for those who have BCF 2000 and haven't seen this option yet, swith off the BCF 2000, then swith on holding down the 3rd upper button– the one just below the Parameter rotary controller. When you start the display will show LC instead of bC. To return to BCF mode, restart holding the 1st upper button, the one just below the Type rotary control.) install the Logic control driver in Logic and you have feedback into the faders and rotary controls. The downside of the Logic Control mode is that is doesn't have instructions and I've spent days trying to work out what all the presets are.
    Remeber too in BCF2000 mode you can not only use the controls to manage automation of ANY midi parameter, but you can also use them to replace keystroke shortcuts. eg I have one button that toggles all tracks between latch and read, another that moves through screen sets another that shows and hides global tracks etc.
    Well worth every penny.
    Peter
    G4 Tower 1.2g GHz Dual   Mac OS X (10.4.2)  
    G4 Tower 1.2g GHz Dual, 2GB RAM   Mac OS X (10.4.4)  

  • Serious issues with motu interface and logic, advice?

    i use a motu 828 mk2, updated to logic pro 7 from 6, everything worked fine for awhile. Sometimes I can spend hours playing and recording software instruments before the program malfunctions. All of a sudden the audio being played becomes out of tune and crackly, fading in and out. Then the screen of the motu begins flipping out, the faders become dim and move kinda erratic and sometimes theres letters that appear NIAG. If I save and close logic, turn off the interface then back on again the problem is gone. (actually sometimes it will work fine again and others it won't. Right now for example I will use logic for a minute and then it comes back again. I keep up on all the mac and logic updates. does my computer cause the problem to the interface or vice versa. Is the interface broke? Do I have the wrong driver?( I downloaded it from motu so I don't believe thats the case). does it have to do with the way all my folders are organized on the hard drive? Has anyone ever heard of anything like this? No? who else could I ask. motu's forum wasn't much help. I almost want to call the geek squad or something like that but I thought all you could give me some ideas. thank you for reading this. I really hope someone replies, even if it's to say which set up you have that works fine, maybe I'll reconsider mine.

    Hey, thanks for the tip. Though, that didn't work. How frustrating, The same problem has occured. Today is the fourth day in a row that I can't use logic. In the past it would act up for a day two then work again. Tuesday ( tomorrow) I'm supposed to have a recording session, It doesn't look too hopeful that this issue will be resolved. Please , if anyone has another suggestion I would greatly appreciate it. Maybe some ideas to isolate the problem. does anyone out there use an mk2? I lost my install disk and downloaded the driver from motu's website, could their universal driver be the problem? I'm getting pretty burnt out with this b/s. Maybe resetting something in logic would help. Any ideas. thank you. I think any response could help.

  • Issue with Axiom 25 and Logic 9/9.01

    New user here of Logic 9 and now Logic 9.01. Yesterday I received the M-Audio Axiom 25. I've noticed on certain plug-in patches I'm getting static (or sounds like digital distortion) with Massive, Mtron etc...Some of the patches are fine but a number of them sound highly distorted. Anyone else experiencing this issue or has any insight as to what the problem may be? Thanks.

    I would say I'm somewhat disappointed that with 171 views not one person has made any suggestions for this issue. Well I ended up resolving my own issue! Turns out that this issue was being caused by use of a sample rate of 192khz with my Motu Ultralite mk3. Once I dropped the sample rate down to 9600 all the distortion was gone. Now to be fair, I presently reverted back to OSX 10.5.7 for testing purposes, but it behaved exactly the same as it did in OSX 10.6.1. So my bet is all along the issue has been the high sample rate of 192 causing the problems with 3rd Party apps (Massive) etc.... Interesting, that I don't notice these distortion issues at 192 with the instruments/sounds in Logic 9. Oh well, I'm glad it is resolved, now on to making music!
    Message was edited by: flashbak

  • Having trouble with condenser microphone and Logic Pro. please help

    I purchased a condenser microphone that runs only with phantom power. I have an XLR cable from the mic into the phantom power interface and have an XLR to USB plugged into my computer, when i go to logic audio preferences it doesnt show that the microphone is even connected (ive checked input and output). Ive even tried it on other programs and i still get nothing. Please Help.

    I have an XLR cable from the mic into the phantom power interface
    What phantom interface is this, make and model.
    XLR to USB plugged into my computer
    What is this? Just a cable?
    What microphone is it?
    Trying to get an idea of your signal chain as, in your original post, your signal chain makes little sense. Do you have an audio interface or is that the phantom power interface you are referring to? A microphone isn't an interface and a mic, in itself, won't show up in Logic prefs (unless it was a USB mic, which it is not).

  • Bank Select with Famton X7 and Logic Sttudio

    Hi,
    I'm a new user of Logic Studio and of this forum ... but I'm familiar with MIDI.
    My Question: How can I send the right MSB and LSB for a program change to the Roland Fantom X?
    For example the Patch *PRA 001* (So far ...)
    There is only one Program Box in a track. I see no possibility to send these two Midi numbers together with my program number ...
    this problem - with your help - will not be a big problem I hope ...
    Many thanks in advance for your ansers.
    Greetings
    - Frank Schweizer

    Hi Frank
    In the instruments parameters box to the left of the arrange window you see the word program and a check box. Check that box to enable program changes. just to the right of the check box (by default) is a small dash - click there to select your bank change command. and just to the right of it, you see a 0 and an up and down arrow, there is where you choose your program change
    By default when you set up and instrument it uses control 0 and 32 for bank select commands, which I believe is standard for Roland. If yours is something other than that you can assign custom bank change messages in the environment
    Hope this helps
    Don

  • Distortion with USB mic and Logic Pro/Garage Band

    I have read a ton of posts, but I have yet to find an answer to this question. I have a USB mic that used to work wonderfully before upgrading to Leopard. When I make a recording now, it usually works well for about 5 minutes, and then out of nowhere I get horrible distortion. I have read that if I changed the frequency from 48000Hz to 44000Hz it would correct the problem. It seemed to work, but the problem keeps coming back. If I switch the microphone profile from built-in mic back to USB Mic in Preferences>Audio, it corrects the problem for a little while. It happens in Logic, Garageband and any other program that I try to record to.
    I read in a Leopard update note that one of the past few upgrades was supposed to fix this issue, but it hasn't been fixed for me. Does anybody know of any solution to this problem? I would be greatly indebted to you!

    Nope. The larger buffer didn't work. What did work was running a cord out of the 1/4-inch jack from the direct box to a 1/4-to-1/8-inch adapter and then into the mic/line-in jack on my computer. I set GarageBand to use the built-in line-in and had no static problems. It's a stopgap until this gets fixed.
    A post by LinuxMercedes on Oct. 3 at http://discussions.apple.com/message.jspa?messageID=8158914 may provide a solution.

  • Logic Express 9 running with Tascam US-122 - possible?

    Hello,
    I've been scouring support forums and the Logic user manual all day and unfortunately cannot seem to find an answer to this:
    Is it at all possible to run Logic Express 9 with the Tascam US-122?
    I've just converted from PC to Mac in the last couple of weeks: all of my software and drivers are all up-to-date so that should not be an issue. Obviously that means that I've previously been using my Tascam with Cubase on the PC, and I was really hoping it would cope with Logic too. The problem is that Logic does recognize the Tascam but when it comes to recording, I can't get it to work. Apparently it's something to do with the sample rate?
    Please help - if it can be avoided, I don't want to have to buy another device. Any advice or answers would be very much appreciated!
    Thank you.

    It sounds like you have the same setup as us.
    I (oops, wife) has a brand new iMac, a Tascam US-122L and a Yamaha KX8 controller. She started with GarageBand, then bought Logic Express 9 and just yesterday we ordered the upgrade to Logic Studio.
    Like any new computer setup of course nothing worked right away.
    She plugs her guitar into the Tascam but it didn't work until we changed to Input 2 in Logic (or was it GarageBand, sorry I am getting them confused).
    Anyway, my point is that you should not need any more hardware to make it work. We have yet to plug a mike into the Tascam...that will be the fun for the weekend....lol
    Good luck,
    Paul

  • Hard drive crashed on my MacBook pro and had to replace drive and logic board.  When I connect my iPhone and try to sync I get a dialog box stating iPhone is synced with another iTunes library, erase and sync?  How do I sync with iTunes without erasing?

    Hard drive crashed and had to replace drive and logic board on my MacBook pro.  After Install tried to sync with my iPhone and a dialog box pops up stating "this iPhone synced with another iTunes library, erase and sync?".  I checked the manually manage music and videos box because I don't want all my wife's pics and music on my iPhone.  How do I Sync without erasing what I have on my iPhone???

    columbus new boy wrote:
    How crap is that?
    It's not crap at all.
    It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
    There has to be a solution.
    Why not simply make a playlist with the songs you want on the iPhone?
    and maintain a current backup of your computer.

  • I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    eBay or Craigslist would be the only choice.

  • Has anyone had a problem using Mainstage 2 and Logic 9 with PreSonus fire studio Mobile?

    I Still can't get Mainstage and Logic to play well with my setup. I'm using a Mac Pro 2 GHz Intel Core i7 with 4 GB ram and Logic 9.1.6 and Mainstage2. I have a PreSonus Firestudio Mobile and M-Audio Midisport midi interfaces. The only Midisport that works consistently is a MisiSport 2X2 sith a thru/merge switch set to merge. I am playing all of this with a Roland A-90 keyboard. Logic sometimes starts, but the audio interface doesn't work. Mainstage crashes on start-up. Can anyone help?
    Thanks,
    Bob

    Hi
    There have been several reported issues on this forum about problems a) with Roland controllers (Sending MIDI Clock and 'All Notes Off' ???), and b) MIDSport interfaces
    https://discussions.apple.com/message/17138809#17138809
    https://discussions.apple.com/message/17011191#17011191
    I suggest that you try a 'scientific' process of elimination:
    Disconnect all external hardware, and try MS
    Connect the hardware singly, one at a time, to determine which is causing the problem
    CCT

Maybe you are looking for