Problem 4G and calling
Good evening,
I really appreciate the integration of new features such as flash, reboot, additional options for the sound
but also the additional themes (Black theme animated !!).
I must confess that I encounter very serious problem for the reception 4G update.
I also have big communication problem very often the voice of my party is not at
all audible as if there was no call, sometimes noise may appear and make
communication almost impossible.
I'm 800M antenna and I must say that on another smartphone, not a problem.
The network settings are nevertheless the same. I look forward to the next patch.
I hope we will not have to wait for the android 5.0 for a correction!
My Micro SIM is new ! ( 3 weeks ) so don't try to make me useless manipulations on my phone ...
-103 37asu
and YES before update i've better settings .... really better ...
Others clients have same problem ...
http://talk.sonymobile.com/t5/Xperia-Z2/Poor-Signal-Sony-Xperia-Z2/m-p/770743#U770743
Similar Messages
-
ifone: 4S
model:MD235B/A
storage capacity: used:11.7 GB---available 941MB
iOS: 8.3
I change my sim card, after I can't send any sms any call and receive too...how I can resolve this problem?The sending and receiving SMS messages is a carrier feature. If you are having problems with this then contact your carrier.
-
Problem with ALV_GRID and CALL TRANSACTION.
Hi all, Could you please tell me
At SE38
Why REUSE_ALV_GRID_DISPLAY and CALL TRANSACTION after called then I click the back button to return to the calling program but it automatic return to the source code? (it hasn't saves the data in alv grid )
In another case of this program, after automatic return to the source code then I have to waiting for 5-10 mins for execute again cuz if immediately execute the program don't fill any data to the alv grid.
I have problem with a simple source code like this
REPORT ZFS_ALV_DEMO.
TYPE-POOLS: slis.
DATA: itab LIKE STANDARD TABLE OF aufk WITH HEADER LINE.
DATA: gs_selfield TYPE slis_selfield "Information cursor position ALV
, w_aufnr LIKE aufk-aufnr. "Order Number
SELECT * FROM aufk INTO TABLE itab WHERE autyp = 40. "//Process Order
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_structure_name = 'aufk'
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND_COR3'
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
FORM user_command_cor3 USING u_ucomm LIKE sy-ucomm
us_selfield TYPE slis_selfield."#EC CALLED
CASE u_ucomm.
WHEN '&IC1'.
gs_selfield = us_selfield.
IF gs_selfield-fieldname = 'AUFNR'.
SET PARAMETER ID 'ANR' FIELD gs_selfield-value.
CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
ELSE.
MESSAGE w208(00) WITH 'Select by Order only!'.
ENDIF.
ENDCASE.
ENDFORM.Hi all, Could you please tell me
At SE38
Why REUSE_ALV_GRID_DISPLAY and CALL TRANSACTION after called then I click the back button to return to the calling program but it automatic return to the source code? (it hasn't saves the data in alv grid )
In another case of this program, after automatic return to the source code then I have to waiting for 5-10 mins for execute again cuz if immediately execute the program don't fill any data to the alv grid.
I have problem with a simple source code like this
REPORT ZFS_ALV_DEMO.
TYPE-POOLS: slis.
DATA: itab LIKE STANDARD TABLE OF aufk WITH HEADER LINE.
DATA: gs_selfield TYPE slis_selfield "Information cursor position ALV
, w_aufnr LIKE aufk-aufnr. "Order Number
SELECT * FROM aufk INTO TABLE itab WHERE autyp = 40. "//Process Order
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_structure_name = 'aufk'
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND_COR3'
TABLES
t_outtab = itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
FORM user_command_cor3 USING u_ucomm LIKE sy-ucomm
us_selfield TYPE slis_selfield."#EC CALLED
CASE u_ucomm.
WHEN '&IC1'.
gs_selfield = us_selfield.
IF gs_selfield-fieldname = 'AUFNR'.
SET PARAMETER ID 'ANR' FIELD gs_selfield-value.
CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
ELSE.
MESSAGE w208(00) WITH 'Select by Order only!'.
ENDIF.
ENDCASE.
ENDFORM. -
downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?
Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it. -
hey my iphone 4 has a problem regarding carrier. Its always showing searching mode and wifi-address N/A and Bluetooth address 00:00:00:00:00 and call function is disable. Please help me. I have tried every thing ..like restore from DFU mode with out sucess.
Refer to Note 98458 - SAPMSSY1, CALL_FUNCTION_NOT_FOUND
-
Problem - Custom Page Call Working via APPS login and not using CRM login
I have created a custom link in the Oracle Portal order page. The call (click) works correctly when I login using a regular apps login and choose ORDER STATUS , but if I login directly to CRM and then access the same page via clicking on ORDER PORTAL image, the link doesn't work --> it seems to get translated to something I am not familiar with. I have illustrated the problem below, and am trying to figure out what to do to make the CRM login environment work as well.
Thanks.
Channeld
Code modification to the CO -->
String dest_url = "OA.jsp?OAFunc=XXX_ONT_FUNC_129&Header_ID_p="+Header_ID;
OAUrl oaurl = new OAUrl(dest_url);
dest_url = oaurl.createURL(pageContext);
osb.setDestination(dest_url);
--> what the link shows in on the order page using both logins
http://pl1ua121.corio.com:8000/OA_HTML/OA.jsp?OAFunc=XXX_ONT_FUNC_129&Header_ID_p=11261&_ti=1811750263&oapc=5&oas=grPSiOwvEyLuXdxKt_a5GA..
--> what the link gets translated to once clicked within a CRM login session; note, during a regular apps login,
the link does not get translated.
http://pl1ua121.corio.com:8000/OA_HTML/RF.jsp?function_id=27070&resp_id=50661&resp_appl_id=672&security_group_id=0¶ms=08V2jKe4UMpLbUVYUjsT8ZCABTTWpQnO7QdLdJyREFbPg8IIF5.vbStfOY8IYonLVX-dbml9UlrBKO.-rfzhVC2iib.jk6vv-9lnvaN2g5jHG7dKBUwLdgDx0woWFYmOIGTJJxkjHrHfmNMIqDTmxzD8K-jXUU8Vqja8Ajn98ZYtdz6iVvq.yKvS3fbGlxu7vsBw20gV7Yp8gAp9Ps90OUg.5HJh9CD8FhYpiJp4ffQHi,
Thanks for the update.
Sir its not about calling the JSP Page from OAF page.
My requirement is what I have explained above.
Please suggest its urgent.
Thanks,
Raja Dutta -
Unique problem, can get calls only from Airtel and...
Hi Friends, I have a unique problem here and some input on the same.
I can receive incomming calls only from Airtel and no other service providers. I do not know why. I cannot even recieve calls from landline and also cannot get other providers SMSes.
Please help me out in this regard.
I am using Nokia E72 handsetYou may want to check your firewall settings. Go to options-security-firewall. Check to see if it is enabled and the scroll down to exceptions and see if any of those are selected.
-
Intermittent problem with outbound calls; can't hear them and they can't hear me.
When I call someone the person can't hear me and I can't them even though call shows connected and minutes are ticking away. Have to hang up and call back. This happens randomly not with every call. Any ideas?
did u fix this problem? i have the same trouble now. need help?
-
Hi. An application me and my friends are having some problems starting is called League of Legends and we want to know more why we cant start the app.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Hi has any1 had a problen with i phone 4 where the home button wont work at all. Since this has happend my voice recognition keeps coming on and calling who it wants!!!
Hi has any1 had a problen with i phone 4 where the home button wont work at all. Since this has happend my voice recognition keeps coming on and calling who it wants!!!
-
Simply way to make sub vi and call it form main vi
I'm a beginner and have major problems to make a sub vi and call it from main vi. I'm going to do a save dialog where is extra info for my saving and want to call dialog from main vi and after that save info to a file or database. I want that save dialog appears after i press button. I attach sub vi where is no functionality yet.
Attachments:
save_dialogsub.vi 21 KBThe first step is to connect the controls and indicators that you want to pass information to and from your main vi.
You right-click on the icon at the top right corner of the Front Panel and select "Show Connector". Typically put inputs at the left and outputs at the right side of the connector pane. Save it.
Open the main vi. Go to the block diagram. Click on "Select a vi" inside the Functions Palette. And choose the sub vi you prepared. Then wire it up inside your main vi.
-JLV- -
Problem with multiple calls to hr_infotype_operation in a loop
Hi,
Im using infotyp 2003 with the following situation. For a date, e.g. 2011/07/20 and a person_nr I have several time entries, like 08:00-09:00, 10:00-12:00, 15:00-17:00. Now I read the entries with HR_READ_INFOTYPE and store them back unmodified with hr_infotype_operation in a loop in the same report.
data: i_p2003 type standard table of p2003.
CALL FUNCTION 'HR_READ_INFOTYPE'
EXPORTING
* TCLAS = 'A'
pernr = person_nr
infty = '2003'
BEGDA = '20110720'
ENDDA = '20110720'
* BYPASS_BUFFER = ' '
* LEGACY_MODE = ' '
* IMPORTING
* SUBRC =
tables
infty_tab = i_p2003
EXCEPTIONS
INFTY_NOT_FOUND = 1
OTHERS = 2.
loop at i_p2003 assigning <p>.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '2003'
number = person_nr
validityend = '20110720'
validitybegin = '20110720'
record = <p>
operation = 'MOD'
dialog_mode = '0'
IMPORTING
return = return_struct
key = personaldatakey
EXCEPTIONS
OTHERS = 0.
endloop.
the first call to hr_infotype_operation succeeds but the following operations fail because of collision. This example is stupid, I know, but it shows the core of a problem I have in a more complex report.
I face the problem that several calls to HR_INFOTYPE_OPERATION cause a collision error even if there cannot be a collision because the data are unchanged.
Any hints on this.
Regards,
JOPHi, you must execute a 'BAPI_EMPLOYEE_ENQUEUE' before 'HR_INFOTYPE_OPERATION' and a 'HR_EMPLOYEE_DEQUEUE' after.
See next example:
Bloqueo del empleado
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
NUMBER = PERNR.
IF SY-SUBRC IS INITIAL.
Si se pudo bloquear el empleado intenta
insertar el infotipo
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = '2001'
NUMBER = P0001-PERNR
SUBTYPE = i_p2001-subty
VALIDITYEND = acdate
VALIDITYBEGIN = acdate
RECORD = i_p2001
RECORDNUMBER = '000'
OPERATION = 'INS'
TCLAS = 'A'
DIALOG_MODE = '0'
NOCOMMIT = ' '
IMPORTING
RETURN = I_RETURN
KEY = I_KEY.
IF SY-SUBRC IS INITIAL.
VARGT = 'Y'.
ELSE.
VARGT = 'N'.
ENDIF.
No se hace COMMIT debido que el estandar lo realiza
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
Desbloqueo del empleado
CALL FUNCTION 'HR_EMPLOYEE_DEQUEUE'
EXPORTING
NUMBER = PERNR.
Regards,
Diego. -
Error while updating data using session and call transaction method
Hi all,
i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
please tell whether the problem lies and solution for that.
thanks and regards.hi,
check your recording.check whether u saved your material no in recording or not.
once again record the transacton mm01.
MATNR LIKE RMMG1-MATNR,
MBRSH LIKE RMMG1-MBRSH,
MTART LIKE RMMG1-MTART,
MAKTX LIKE MAKT-MAKTX,
MEINS LIKE MARA-MEINS,
MATKL LIKE MARA-MATKL,
BISMT LIKE MARA-BISMT,
EXTWG LIKE MARA-EXTWG,
these are the fields which u have to take in internal table.
this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
SUDHU-6 R ROH MATSUDHU " 001 7890 AA
i did the same.but i didn't get any error. -
Problems with and tags while reading the xml file
Hi
I am using the xml files in my project. The project uses Tomcat, JMS. The project is divided into some components which communicate with each oher thru JMS. The component for which I am responsible gets a dcoument object from the JMS which is a processed xml of the following format (the processing is done by the DBMS_XMLGEN package of oracle)
<?xml version="1.0" encoding="UTF-8"?>
<root>
<filename>157_1000000001</filename>
<querydata>
<tabdata>
<tabinfo>Tab-id3</tabinfo>
<queryset>
<query name="Fax">
select a.ARLN_NAME,d.TICKETED_ORIGIN,d.TICKETED_DESTINATION, d.ENDORSEMENTS,to_char(d.DATE_OF_ISSUE,'DDMONYY') as DATE_OF_ISSUE ,d.EXCHANGE_DOC_TYPE,
d.PASSENGER_NAME,d.ORIG_ISS_AIRLINE,d.ORIG_DOC_NO,d.ORIG_PLACE_OF_ISSUE,
to_char(d.ORIG_DATE_OF_ISSUE,'DDMONYY'),d.ORIG_ISSUE_AGENT,d.CUR_OF_SALE,d.GROSS_FARE,d.EQUIV_CUR_OF_SALE,d.EQUIV_FARE,
d.PANDA_DEAL_CODE,d.ISI,d.reporting_date
from airline_master a,ticket_main d,ticket_conj e where d.doc_no = e.doc_no and d.iss_airline = e.iss_airline
and e.conj_doc_no = (select DOC_NO from TICKET_CONJ where CONJ_DOC_NO = 1000000001 and ISS_AIRLINE = 157)
and e.ISS_AIRLINE = 157 and d.iss_airline = a.ARLN_NUM_CODE
</query>
</queryset>
</tabdata>
</querydata>
the function on my side is like this
private void processMessage(ObjectMessage objmessage)
Document XMLreqObject = (Document) objmessage.getObject();
Element root = XMLreqObject.getRootElement();
String resultFilename = root.getChildText("filename");
Element tabSet = root.getChild("querydata");//doesnt work
ArrayList tabSetlist = new ArrayList(tabSet.getChildren ("tabdata"));//doesnt work
The code commented with "doesnt work", is not working. What must be the problem ?
Thanks in Advance
MartinOkay. Your original example XML didn't include < or > which was rather confusing if that particular feature was supposed to be the cause of the problem. Also calling them "tags" was rather confusing since "tags" is the term for the things that come at the beginning and of an element, like this:<data>...</data>Anyway, I assume your theory is that documents that don't have < in a text element process correctly and documents that do have < in a text element get "stuck" in the parser? Well, from your original description the process appears to be:
1. Create XML
2. Parse it into a Document
3. Send the Document via JMS
4. Receive the Document via JMS
5. Process it.
And it's step 4 that is "stuck"? That would be my guess based on the code you posted. -
Problems with a call transaction
Hi, I'm having some problems with a call transaction and I cannot understand why. I put A in the mode, and I am seeing the dynpros and I am pressing enter it works perfectly but when I use mode N it tells me that there is not information for one of the dynpros and it doesn't work. Does anybody know the problem and how to solve it??
Thanks in advanceHi,
First of all thank you very much for your time.
I am using FB05 and the problem is in dynpro SAPLKACB 0002, and it says that batch input data doesn't exist. Here is the code, maybe you can see what is happening
LOOP AT t_resumen WHERE belnr = t_batch-belnr AND
( contador = 3 OR contador = 4 or CONTADOR = 5 ).
READ TABLE t_clave WITH KEY belnr = t_resumen-belnr.
d_clave = t_clave-bschl.
i = i + 1.
CASE i.
WHEN 1.
PERFORM bdc_dynpro USING 'SAPMF05A' '0700'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'RF05A-NEWBS' t_resumen-bschl.
PERFORM bdc_field USING 'RF05A-NEWKO' t_resumen-hkont.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
j_wrbtr = t_resumen-wrbtr.
REPLACE '.' WITH ',' INTO j_wrbtr.
PERFORM bdc_field USING 'BSEG-WRBTR' j_wrbtr.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
WHEN t.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'RF05A-NEWBS' t_resumen-bschl.
PERFORM bdc_field USING 'RF05A-NEWKO' t_resumen-hkont.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
j_hkont = t_resumen-hkont.
j_clave = t_resumen-bschl.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE' '=BU'.
j_wrbtr = t_resumen-wrbtr.
REPLACE '.' WITH ',' INTO j_wrbtr.
PERFORM bdc_field USING 'BSEG-WRBTR' j_wrbtr.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
WHEN OTHERS.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'RF05A-NEWBS' t_resumen-bschl.
PERFORM bdc_field USING 'RF05A-NEWKO' t_resumen-hkont.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
j_hkont = t_resumen-hkont.
j_clave = t_resumen-bschl.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
j_wrbtr = t_resumen-wrbtr.
REPLACE '.' WITH ',' INTO j_wrbtr.
PERFORM bdc_field USING 'BSEG-WRBTR' j_wrbtr.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
ENDCASE.
READ TABLE t_porcentajes WITH KEY gjahr = t_resumen-zzbad
zzbtd = t_resumen-zzbtd.
IF j_hkont = t_porcentajes-cfacpr.
PERFORM bdc_field USING 'COBL-PRCTR' t_porcentajes-prctrfac.
PERFORM bdc_field USING 'COBL-ZZBTD' t_resumen-zzbtd.
PERFORM bdc_field USING 'COBL-ZZBAD' t_resumen-zzbad.
ELSEIF t_resumen-hkont = t_porcentajes-cadmin.
PERFORM bdc_field USING 'COBL-KOSTL' '20801'.
ELSEIF t_resumen-hkont = t_porcentajes-creca.
PERFORM bdc_field USING 'COBL-KOSTL' '20401'.
ELSE.
IF d_clave = 01 OR d_clave = 04 OR d_clave = 40 OR d_clave = 09.
IF j_hkont >= 424001 AND j_hkont <= 424005.
PERFORM bdc_field USING 'COBL-PRCTR' 'DUMMY'.
ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
IF j_clave = 40.
PERFORM bdc_field USING 'COBL-PRCTR' 'DUMMY'.
ENDIF.
ENDIF.
ELSEIF d_clave = 11 OR d_clave = 12 OR d_clave = 14 OR d_clave = 50.
IF j_hkont >= 424001 AND j_hkont <= 424005.
PERFORM bdc_field USING 'COBL-PRCTR' 'DUMMY'.
ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
IF j_clave = 50.
PERFORM bdc_field USING 'COBL-PRCTR' 'DUMMY'.
ENDIF.
ENDIF.
ENDIF.
*Fin modificacion marzo 2007.----
PERFORM bdc_field USING 'COBL-ZZBTD' t_resumen-zzbtd.
PERFORM bdc_field USING 'COBL-ZZBAD' t_resumen-zzbad.
PERFORM bdc_field USING 'COBL-ZZBTT' t_resumen-zzbtt.
PERFORM bdc_field USING 'COBL-ZZBTU' t_resumen-zzbtu.
PERFORM bdc_field USING 'COBL-ZZBTS' t_resumen-zzbts.
PERFORM bdc_field USING 'COBL-ZZBAG' t_resumen-zzbag.
PERFORM bdc_field USING 'COBL-ZZBRE' t_resumen-zzbre.
PERFORM bdc_field USING 'COBL-ZZBC8' t_resumen-zzbc8.
PERFORM bdc_field USING 'COBL-ZZBC9' t_resumen-zzbc9.
ENDIF.
ENDLOOP.
Maybe you are looking for
-
My Desktop App will not open anymore
My Desktop App will not open anymore; The app starts to open, but it just stays a blank white screen. I've tried uninstalling and reinstalling twice but it still doesn't work
-
Problem with to many computers in there system Bob S
I am having trouble downloading some of my songs i tunes is telling me that I have to authorize the song and when i do it tells me that i can only authorize 5 computers I oly have three? how do you deauthorize two of them?
-
I don't see the plug-in container in the Windows Task manager since the last update of Firefox and now FF is freezing multiple times a day (since the previous update, before yesterday's). It takes several minutes after I see this until it unfreezes,
-
Best Practices for Exporting with Bug overlay
I'm trying to optimize a bug graphic so as to speed up exports from FCP. I'm working at XDCam 1080i/60 (timeline + footage) and have experimented with different types of bugs, all PSD files. Here's what I've found exporting a 10 min. segment: No bug
-
is anyone having aproblem with aol desktop for mac since installing lion. aol keeps shutting down with an error message, saying a report is being sent to apple. i cannot sign in, as soon as i try to type my password, it just quits. i have reinstalled