Problem about Bex Exception

Hi All,
I have some problems with bex exception. In my query, I have 3 columns  (the third one is a rate calculated from the first (C1) and second columns (C2)). I have a characteristic in row which lists the different values. Sometimes, I have no value for C1 and C2 and also, the value  rate is space (thatu2019s normal behaviour). I must highlight some rate by
If rate < 55         bad
If rate => 55      good
I did an exception
Bad        except1    BT      0  to 54
good      except2    GE      55
That works fine but my problem is :
The rate cells with a space value are also highlighted with the bad colour. Have you some idea to avoid this behaviour ?
C1                        C2                                                 Rate
1000                         5                                               200   (C3)
100                        20                                                5    (C3)
space                              space                               space   (C3)
1st  C3 is green
2nd C3  is red
3rd  C3  is also red (I want to leave blank)
Thanks fot your help.

Hi,
If you are in BW 3.5 then you can make us of class interfaces for this scenario and it was explained here in this article.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0b4cfcc-f9c1-2b10-1bb5-d4b61083d471
Hope this helps you.
Regards,
Rajkandula

Similar Messages

  • Problems about  query filter (BEx).

    Hello there,
    I have some problems about  query filter (BEx).
    I have master data and I want to use attribute in this master data to dynamic filter in query(BEx).
    But this attribute is key figure. I can't done it now. TT
    Is this possible? If yes, could anyone advise how this is to be done?
    Thanks in advance.

    Hi
    In BEx there is option as 'Exceptions' & 'Conditions'. If you go in condition, you can specify range for key figure output. This is either predefined or by user selection. You create the condition as per your requirement & it will show you filtered data.
    How to create conditions you will find easily on this site.
    You can create as many conditions as no of filters you want. You can create these at query level also at report output level.

  • An old and difficult problem about "UnsatisfiedLinkError"

    Hi dear all,
    I have been struck with the problem about "UnsatisfiedLinkError". I have a c++ class HelloWorld with a method hello(), and I want to call it from within a java class. In fact, I have succeeded in calling it on the windows platform. But when I transfer it to linux, the error "UnsatisfiedLinkError" comes out. I have tried to take the measures as Forum has suggested, but it failed.
    The source code is very simple to demonstrate JNI.
    "HelloWorld.h"
    #ifndef INCLUDEDHELLOWORLD_H
    #define INCLUDEDHELLOWORLD_H
    class HelloWorld
    public:
    void hello();
    #endif
    "HelloWorld.cpp"
    #include <iostream>
    #include "HelloWorld.h"
    using namespace std;
    void HelloWorld::hello()
    cout << "Hello, World!" << endl;
    "JHelloWorld.java"
    public class JHelloWorld
    public native void hello();
    static
    System.loadLibrary("hellolib");
    public static void main(String[] argv)
    JHelloWorld hw = new JHelloWorld();
    hw.hello();
    "JHelloWorld.cpp"
    #include <iostream>
    #include <jni.h>
    #include "HelloWorld.h"
    #include "JHelloWorld.h"
    JNIEXPORT void JNICALL Java_JHelloWorld_hello (JNIEnv * env, jobject obj)
    HelloWorld hw;
    hw.hello();
    All the files are in the same directory and all the processes are under the dirctory:
    1. javac JHelloWorld.java
    2. javah -classpath . JHelloWorld
    3. g++ -c -I/usr/java/jdk1.3/include -I/usr/java/jdk1.3/include/linux JHelloWorld.cpp HelloWorld.cpp
    4. ld -shared -o hellolib.so *.o
    5. java -cp . -Djava.library.path=. JHelloWorld
    Exception in thread "main" java.lang.UnsatisfiedLinkError: no hellolib in java.library.path
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1349)
    at java.lang.Runtime.loadLibrary0(Runtime.java:749)
    at java.lang.System.loadLibrary(System.java:820)
    at JHelloWorld.<clinit>(JHelloWorld.java:7)
    Tried another measure:
    i) export LD_LIBRARY_PATH=.:$LD_LIBRARY_PATH
    ii)java -cp . JHelloWorld
    The same error came out as above.
    I really don't know what is wrong with it.
    Would you like to help me as soon as possible?
    Thanks.
    Regards,
    Johnson

    Hi Fabio,
    Thanks a lot for your help.
    It is very kind of you.
    Regards,
    Johnson

  • Problem about space management of archived log files

    Dear friends,
    I have a problem about space management of archived log files.
    my database is Oracle 10g release 1 running in archivelog mode. I use OEM(web based) to config all the backup and recovery settings.
    I config "Flash Recovery Area" to do backup and recovery automatically. my daily backup schedule is every night at 2:00am. and my backup setting is "disk settings"--"compressed backup set". the following is the RMAN script:
    Daily Script:
    run {
    allocate channel oem_disk_backup device type disk;
    recover copy of database with tag 'ORA$OEM_LEVEL_0';
    backup incremental level 1 cumulative copies=1 for recover of copy with tag 'ORA$OEM_LEVEL_0' database;
    the retention policy is the second choice, that is "Retain backups that are necessary for a recovery to any time within the specified number of days (point-in-time recovery)". the recovery window is 1 day.
    I assign enough space for flash recovery area. my database size is about 2G. I assign 20G as flash recovery area.
    now here is the problem, through oracle online manual, it said oracle can manage the flash recovery area automatically, that is, when the space is full, it can delete the obsolete archived log files. but in fact, it never works! whenever the space is full, the database will hang up! besides, the status of archived log files is very strange, for example, it can change "obsolete" stauts from "yes" to "no", and then from "no" to "yes". I really have no idea about this! even though I know oracle usually keep archived files for some longer days than retention policy, but I really don't know why the obsolete status can change automatically. although I can write a schedule job to delete obsolete archived files every day, but I just want to know the reason. my goal is to backup all the files on disk and let oracle automatically manage them.
    also, there is another problem about archive mode. I have two oracle 10g databases(release one), the size of db1 is more than 20G, the size of db2 is about 2G. both of them have the same backup and recovery policy, except I assign more flash recovery area for db1. both of them are on archive mode. both of nearly nobody access except for the schedule backup job and sometime I will admin through oem. the strange thing is that the number of archived log files of smaller database, db2, are much bigger than ones of bigger database. also the same situation for the size of the flashback logs for point-in-time recovery. (I enable flashback logging for fast database point-in-time recovery, the flashback retention time is 24 hours.) I found the memory utility of smaller database is higher than bigger database. nearly all the time the smaller database's memory utility keeps more than 99%. while the bigger one's memory utility keeps about 97%. (I enable "Automatic Shared Memory Management" on both databases.) but both database's cup and queue are very low. I'm nearly sure no one hack the databases. so I really have no idea why the same backup and recovery policy will result so different result, especially the smaller one produces more redo logs than bigger one. does there anyone happen to know the reason or how should I do to check the reason?
    by the way, I found web based OEM can't reflect the correct database status when the database shutdown abnormally. for example, if the database hang up because of out of flash recovery area, after I assign more flash recovery area space and then restart the database, the OEM usually can't reflect the correct database status. I must restart OEM manually to correctly reflect the current database status. does there anyone know in what situation I should restart OEM to reflect the correct database status?
    sorry for the long message, I just want to describe in details to easy diagnosis.
    any hint will be greatly appreciated!
    Sammy

    thank you very much, in fact, my site's oracle never works about managing archive files automatically although I have tried all my best. at last, I made a job running daily to check the archive files and delete them.
    thanks again.

  • Problem about get the workflow context

    There are 2 servers.
    One is Weblogic server (server1), deployed a fusion web project on it.
    Another is BPM server (server2), deployed the bpm process on it.
    On the fusion web project, we use API to get the tasks. But we encountered a problem about get the workflow context.
    There are 2 method to get the workflow context.
    1. getTaskQueryService().authenticate(userId, password, null, null), this method need to pass in useId and password, we can get the user form request but can't get
    password.
    2. getTaskQueryService().createContext(request), we pass the request on server1, but can't get the context on server2, exception thrown.
    Appreciate if you can give some help.

    javax.el.ELException: java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[jcooper, ERole]
         at javax.el.BeanELResolver.getValue(BeanELResolver.java:266)
         at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:173)
         at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:200)
         at com.sun.el.parser.AstValue.getValue(Unknown Source)
         at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
         Truncated. see log file for complete stacktrace
    Exception thrown when createContext()

  • Problem about oracle

         Statement stmt = con.createStatement();
                        stmt.executeUpdate("DROP TABLE Students");
                        stmt.executeUpdate("CREATE TABLE Students" +
                         "(StdNumber NUMBER primary key, StdName VARCHAR2(20),StdSurname VARCHAR2(20),Courses VARCHAR2(15), Year VARCHAR2(15),Semester VARCHAR2(5), Grades REAL )" );
                      stmt.executeUpdate("INSERT INTO Students" +
                         "VALUES (1234,'Sezgin','Zeka','Kimya','2002-2003','I',4.00)" );
                      ResultSet rs = stmt.executeQuery("SELECT Courses FROM Students WHERE stdNumber = 1234");          
                        while(rs.next())
                         System.out.println(">>> " + rs.getString("Courses"));     
                     }catch(Exception ex) {
                        System.out.println("Error: " + ex); 
                     }Dear friend i have a problem about oracle. When i execute this code ( i have only written releated code part about my problem ) there is an error like this: Error: java.sql.SQLException: ORA-00928: missing SELECT keyword
    Thanks for your help

    Can you explain much more. Because i have no idea.
    ThanksYou know, if you did like every decent programmer does and instead of writing
    }catch(Exception ex) {
      System.out.println("Error: " + ex); 
    }wrote
    }catch(Exception ex) {
      ex.printStackTrace(); 
    }then you could see which statement is faulty.

  • Problem about excel download

    Dear all,
    I got a problem about Thai language.
    I wrote down ABAP code for sent mail and attached excel file to business workplace, but when I open excel file I can not read Thai language.
    Please advance.
    Regard
    Lee

    Hi Santosh,
    I cant change the code because it's SAP standard (I would njeed to find an OSS note and there doesnt seems to be one there) the SAP Standard incluse is LSLPCF02 and the code is as follows:
    DATA: fname type string,
            result type abap_bool.
      fname = file_name.
      CALL METHOD cl_gui_frontend_services=>file_exist
        EXPORTING
          file            = fname
        receiving
          result          = result
        EXCEPTIONS
          others          = 0.
      call method cl_gui_cfw=>flush.
      IF result = abap_false.
        RAISE file_not_exist.
      ENDIF.
    This seems to be the same, only difference is the way i_result is declared ??
    Thanks

  • Problem in BEx analyzer output in BI dev and BI Quality

    Hi All
    I am facing a problem in BEx analyzer output in BI Dev and BI Quality server where the query is make on BI infoset.
    When i am executing the query in BI dev server then it is giving the output result but when i tried to executing the BI query in BI quality server the i got 'No available data found result'.
    I have also checked the same selection input result in infoprovider for infoset and output is getting for the same.
    Please suggest for regarding solution.
    thanks & regards,
    Gourav Sekhri

    Hi,
    check whether you have loaded data in to quality server if no, please load data for all the target involved in info set.  If data loaded check all the target 'request for reporting available 'or not.
    Also check whether data is showing in infoset or not.. if data availble there change your selection critiria accordingly.
    Thanks
    BVR
    Edited by: binu v. rajan on Aug 20, 2011 4:23 PM

  • A problem about calling Labview vi in VB

    Hi all:
    I meeting a problem about data transfer and parallel operation between VB and Labview.
    Actually, I want develop a VB program, in which, the Labview VI can be called and corresponding parameters can be transferred to Labview. and then, I also can operate my system by VB program at same time. something like parallel operation (VB and Labview program).
     But the question is :
    1.   If I use "Call" method of ActiveX in VB,  and the LabVIEW subvi is not stopped (for example, a loop structure), I can not do  parallel operation on VB program. The error message is "other application is busy" which is attached below. The sample codes is also attached.
    2.   I tried to use other methods like "OpenFrontPanel" and "Run", but I am not sure how to transfer the parameter??
    3.  Then I tried to use "SetControlValue" to set the parameters, but there is a error " := expected", which is very strange, because the statement  I wrote is followed with the help documents [ eg: VI.SetControlValue ("string", value)], why it is still need a "=" ??
    Does anybody know something about it? Thanks a lot
    Message Edited by hanwei on 11-07-2008 03:18 PM
    Attachments:
    vb_labview_error_message_1.JPG ‏14 KB
    VB_to_LV.zip ‏10 KB

    I sure hope OP has solved it by now.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • Problem about Handling of Empty Files in File Adapter

    Hello everyone,
    NetWeaver 2004s --- XI
    In Sender i have a File Adapter.
    Now i meet a problem about Handling of Empty Files. When i send empty file, but don't cerate a leer message.
    I have seen following text in help document. But in adapter configuration i can not find the correspond parameter.
    can you give me some tips?
    Thx in advance
    best regards
    Yaning
    SAP Help Document über File Adapter
    +Handling of Empty Files
    Specify how empty files (length 0 bytes) are to be handled.
    &#9675;       Do Not Create Message
    No XI messages are created from empty files.
    The files are processed according to the selected Processing Mode.
    For example, if the processing mode is Delete, empty files are deleted in the source directory.
    &#9675;       Process Empty Files
    XI messages are created with an empty main payload.
    The files are processed according to the selected Processing Mode.
    &#9675;       Skip Empty Files
    No XI messages are created from empty files.
    Empty files are skipped and remain in the source directory.+
    Help Docu

    hi,
    it's available since Sp19 for XI 3.0
    and the corresponding SPS fpr XI 7.0
    http://help.sap.com/saphelp_nw04/helpdata/en/44/f565854b7341e6e10000000a1553f6/frameset.htm
    so probably you need to install the new SP
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Problem about sales order stock stock transfer and batch determination

    Hi, experts, I get a problem about sales order stock stock transfer and batch determination.The following is the current situation of my system:
      In OMCG I assigned search procedure ME0001 to both 311 and 311 E and ticked check batch. After that, I found  that if iI need to tranfer unrestricted-use material from storage location 1000 to 2000 with movement type 311, I just need to input * at the field batch, then the system will display all of the available batches. But for the transferring of sales order stock with movement type 311 E, after I input * at the batch field, no batch is displayed and there is also no message from the system.
      Can anybody help me? Is there anything else I need to do? Thanks very much.

    I think my question is not clear, actually I tried 562 E , 411 E and 413 already. all the transaction looking for the sales order but unfortunatly the sales order is deleted  from SAP.

  • I can't open iTunes on my pc in windows. I keep getting a Problem event: BEX error.

    can't open iTunes on my pc in windows. I keep getting a Problem event: BEX error.  How can i fix this?  need very detailed step by step instructions on how to fix. thx

    Check out this discussion link:
    https://discussions.apple.com/thread/2777410?threadID=2777410&tstart=15

  • Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

    Hello apple
    I have the problem with my iPhone and my friends have this problem too.
    My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
    Who have this problem??

    Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

  • Problem about updating to Mac OS X 10.5.3

    Hi there,
    I just bought my Macbook two months ago. I encounted a problem about updating it to the latest version of MAC OS X. The system reminded me to restart, I proceed. Everythig looked just fine until a poping up window shown "Mac OS X 10.5.3 pacakage can not be validated". Dose anyone know what did that mean? How can I update my little mac?

    Hi Hummer,
    First, welcome to Apple discussions.
    To answer your question, your computer checks all downloaded updates before installing them. It does this to make sure it's got the entire file and that the update will install correctly. The fact that validation fails on your machine probably means the file did not download correctly.
    To install 10.5.3, simply go to this website, download the "10.5.3 combo update" and then run it on your Mac: http://www.apple.com/support/downloads/

Maybe you are looking for