Problem about D-link card installation on Solaris 8 intel

hello,
I don't know how to install my ethernet card on the Solaris 8 intel.
It's a D-link DFE-530TX model on PCI bus.
Could you send my the methode to install it.
Thank you very much.

Hi,
refer this URL http://sun.drydog.com/faq/s86faq.html.
(Note: question - 6.7)
revert back.
Thanks.
regards,
senthilkumar
SUN - DTS

Similar Messages

Installation of Solaris 9 Intel Version in Windows XP PC

I am very much interested in installation of Solaris 9 intel version in my PC which is windows XP version.
My PC Processor : AMD Athlon
I am not able to install solaris 9 in my PC.
Sun boot version is Sun OS secondary boot version 3.0.
During installation,i am going untill selection of type of installation. After selecting the Interactive type,the system is rebooting again without installing.
Select the type of installation you want to perform
(1) Solaris Interactive
(2) Custom Jumpstart
After selecting from above,the system is rebooting again without installing.
Please help me with the installation.

Try on HCL BigAdmins website to know if your hardware is supported

Installation of Solaris 9 intel version in windows XP

I am very much interested in installation of Solaris 9 intel version in my PC which is windows XP version.
My PC Processor : AMD Athlon
I am not able to install solaris 9 in my PC.
Sun boot version is Sun OS secondary boot version 3.0.
During installation,i am going untill selection of type of installation. After selecting the Interactive type,the system is rebooting again without installing.
Select the type of installation you want to perform
(1) Solaris Interactive
(2) Custom Jumpstart
After selecting from above,the system is rebooting again without installing.
Please help me with the installation.

Are you trying to install Solaris 9 onto a server that is already running Windows XP and to keep Windows XP too?
You'll need to create a partition on which to install Solaris, - search for Solaris Windows Dual Boot on docs.sun.com for more information.

Problem with ana 3.6 Installation on solaris 10

Hi,
I'm going to install Cisco Ana 3.6.5 on Solaris 10 and this is my first experience.
here are the information about my installation:
OS: Solaris 10 64-bit
Oracle 10g 10.2.0.3
I have installed Oracle and now when i try to install ana gateway , i get this Error Message:
- sheer doesnt exist, creating in /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf table space...
*** ERROR: Can not create table space /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf. ABORTING. ***
could you please help me?
Thanks in advance

I've solved the problem by setting password for scheme sheer to cisco !
- Enter the Oracle sid: MCDB
- Enter the Oracle admin username: system
- Enter the Oracle admin password: ********
- Enter the password for the scheme sheer: cisco
- Enter the location of the data files: /export/home/oracle/product/db_10g/oradata
- Enter the Oracle Listener port: 1521

Problem installing WL 6.1 SP3 on Solaris 7 Intel

Dear all,
When I try to run the installation toolkit weblogic610sp3_sol.bin on Solaris 7
Intel, the following error occurs: "Error: can't find libjava.so."
Then, I try to run the toolkit with the following command:
sh weblogic610sp3_sol.bin LAX_VM $JAVA_HOME/bin/java -i console
but it hangs on the create password step.
I wonder if the installation toolkit supports Solaris 7 Intel.
Any answer would be appreciated.
Regards,
Fion

I think the problem is that Solaris comes with JDK 1.2 and that is not good enough.
What does "java -version" show you?
Try it without specifying the LAX_VM so that the jdk within weblogic is used.
Better yet, if you have a previous version of wls installed, use the jdk that came with
it by putting it in your PATH in the FRONT.
export PATH=<whatever>/bea/jdk131_03/bin:$PATH
sh weblogic610sp3_sol.bin install -i console
Wayne Scott
Fion Tam wrote:
Yes, I have Java bin in my path.
When I run installation with the command you've mentioned in the previous reply,
the process still hangs on the create password step.
Fion
"Wayne W. Scott" <[email protected]> wrote:
Try inserting the word "install" before the '-i'
sh weblogic610sp3_sol.bin LAX_VM $JAVA_HOME/bin/java install -i console
Do you have the JAVA bin in your PATH?
Wayne Scott
Fion Tam wrote:
Dear all,
When I try to run the installation toolkit weblogic610sp3_sol.bin onSolaris 7
Intel, the following error occurs: "Error: can't find libjava.so."
Then, I try to run the toolkit with the following command:
sh weblogic610sp3_sol.bin LAX_VM $JAVA_HOME/bin/java -i console
but it hangs on the create password step.
I wonder if the installation toolkit supports Solaris 7 Intel.
Any answer would be appreciated.
Regards,
Fion

Problem about Object Link customizing.

Hi guys:
I want to customize the "object link".
In the Layout of user interface>Navigation(URL Generation)>Assign Object Method to Role, there is a field ,IDPage/Service, need to be maintained. How and where can I get the content to fill it?
Can anyone help?
Thanks

I am also very interested in this topic. The pc-ui cookbook best I can tell does not provide a simple example demonstrating this functionality...I would welcome some doc like this.
I am faced with the problem of improving navigation. Essentially the use case is: in
CRMD_MKTPL (marketing planner) pc-ui the user can hit the button "Generate Trade Event"...this will do its thing and issue an info message saying Event 1234 has been generated...the desire by the customer is to open the same app in a new window using the newly generated event id. I think that the pc-ui navigation(URL Generation) should be usable for this?
Am I right to assume that you have to have the portal available to test this? (at the moment I am working remotely)
Any help on this topic is appreciated
Thanks

Reboot in Installation in Solaris 8 (intel)

I am attempting to install Solaris8 on a new machine. Everything goes exactly as described in the
installation guide up until the "Boot Solaris" screen. After the messages:
"Configuring /dev and /devices
Using RPC Bootparams for network configuration information."
the screen blanks and the machine reboots. I was expecting to be prompted to create some disk
partitions. Is there something I need to do to the disk drives first?
Thanks,
Abdul Wahid Khalil

Let me guess, there's a 3com 3c905c (or equivalent) in your
machine, using the new asic that is not supported by the solaris
elxl driver?
See also:
http://groups.yahoo.com/group/solarisonintel/message/24495

This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Need help!!!

This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Everything used to be good before.
Do anyone know what I supposed to do in that situation?
Really need help!
Thanks in advance.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

The problem is that i cant move on to any application because of itunes repeated info about my credit card..can i reset everything and start all over again without intervention from itunes ?

hello there..pls try to help me out regarding setting up my ipad mini...just new in apple product...its regarding the application (free) like fb, and games....that everytime i tried this i tunes keeps appearing and asking about my credit card details which i have no intention yet to purchase anything. how can i move on and install any applications without seeing this itunes credit card info...thanks a lot to apple users.....have a nice day..

Short answer is:
To use iTunes/App Stores you MUST create an account and have credit card information. You can easily change that and I believe you can also select to not use a credit card, but if there is problems you should contact iTunes support for accounts. Support.apple.com and choose iTunes, then choose Contact Support.

Solaris 8 (Intel) Installation problems

I have not been successful to install Solaris 8 (Intel version).I am
installing from the (Install CD) and I get to the Solaris Boot screen that
says:
Select one of the identified devices to boot the Solaris Kernel and
choose F2 to continue. Solaris identifies 2 IDE Disk Drives (on Primary Controller),
a third IDE HDD (Secondary master) and the CD ROM as a slave on the Secondary
Controller. When I choose the CD ROM as the Boot disk, the system hangs
forever!. Any suggestions?
P.S: The installation CD contains the following:
image = 550MB
(.VOLUME) : 47 bytes
ADD_INSTALL_CLIENT: 54.5KB
BOOT: 0 bytes
COPYRIGHT: 5.3KB
MODIFY_INSTALL_SERVER = 3.37KB
The total of these files is : 93KB
Dose this seem correct, having in mind that the image file is 550MB
Thanks,
Kamel Elchazli

At the "(b)oot or (i)nterpreter" prompt, type:
b kadb -v
This loads the Solaris kernel under kernel debugger (kadb) control.
Apparently your system crashes with a kernel panic, and when kadb
is loaded, kadb will catch the kernel panic error and drop you into the
debugger so that you can read the panic messages.
The "-v" option enables verbose kernel messages, which might be
useful to diagnose the problem.

Link to download X86 Solaris Installation for weblogic 10.3

Can please anyone let me know the link to download X86 Solaris Installation for weblogic 10.3.
I am only able to see installables for X86 windows,X86 linus & sparc but nothing for X86 Solaris.

Hi;
Can please anyone let me know the link to download X86 Solaris Installation for weblogic 10.3.I belive its not available. Please check :
WebLogic 10.3 availability?
Also check certification matrix:
http://www.oracle.com/technology/support/metalink/index.html
Regard
Helios

My apple ID was hacked and a game by GodGame Inc was bought and installed. When I try to report a problem about this transaction, the link automatically sends me to the apple store support. The application is bugged. Please help.

My apple ID was hacked and a game by GodGame Inc was bought and installed. When I try to report a problem about this transaction, the link automatically sends me to the apple store support. The application is bugged. Please help.

thanks for your response roaminggnome. I changed my password immediately after it happened and I have contacted i tunes to let them know of this dillemma.
The I-tunes credit was a promotional thing by Apple to buy their laptop. So I didn't pay for the i-tunes credit in the first place. Do you think my bank will be able to reinburse Itunes credit then? I will ask support when they get back to me.

ATI e-mail told me to come here about the G4 card

I helped a friend to get a computer and one of the things he got was a nice new shiny MSI G4 MX440 card with 64megs of DDR RAM and TV out!.
It has been about 1 year and 3 months now and one day his computer started sounding funny. He called me up and I had a look and it turns out that his FAN was CRACKED and APPEARED to have LEAKED out some GREASE or OIL onto the heatsink. The FAN was cracked and off balance through and it bugged him when he tried to play CS with it.
WELL. I sent e-mail to MSI (the support address) and THIS is what I got back:
To our Valued Customer,
Thank you for purchasing & supporting MSI product.
This E-mail is an automatic reply which is to notify you that you have
reached [email protected]
In order to give you an overall technical support, we have listed some
common problems and solutions for your reference.
Please take time to read the useful FAQ which we have compiled from the
technical support e-mails we have received as link and see if it helps
the problem you are facing.
http://www.msi.com.tw/html/e_service/main.htm
We hope the directions below answer your question. If your problem still
cannot be solved after going through all the suggestions, then you can
reply this e-mail containing the automatic reply with your original
e-mail. We will get back to you as soon as possible.
I. Read the Manual
Most users have tendency not to read the manual under the presumption
that they already know what is written in there. However, we have seen
that there are percentage of technical support calls & e-mails as a
result of not reading the manual
II. Keep your MSI CD drivers
MSI CD drivers provide easy driver installation via auto-run. Losing it
would require you to install driver manually
III. Contact your Reseller
Your reseller or the store/company that sold the motherboard or system
to you should know well what your system contains & have the necessary
resources to help you in your problem. Since they can see your system
clearly, it is easier for them to identify if your problem was caused of
wrong installation or wrong assembly or defective product, etc. It would
be advisable to contact your reseller for those having problems like
system cannot power on or need to send board for repair
NOTE: there is a tiny percentage that the board might be defective & by
contacting your reseller at an earlier time prevent your warranty being
voided. Some resellers provide certain period of time for
return/exchange, after that you have to either send the board to them
for repair or you are on your own.
IV. Check our website
Some of the information you are looking for might be already posted in
our website
V. Search in MSI Forum
Your problem might have encountered by another user in the forum or you
might find answer in the Good Article forum with a lot of useful posts
written by moderators & power users. You can also post a message there
to get help
VI. Read the FAQ
Attached Link is a list of useful FAQ which we have compiled from the
technical support e-mails we have received
http://download.msi.com.tw/support/dvr_exe/user.exe
Best Regards,
MSI Technical Support
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This was a simple problem to fix. Why the hell was I told to come here? You mean I can just DOWNLOAD a new fan?
This is what I need: A NEW FAN DAMMIT!
Not stories from other folks that had the same problem. Geeze, you would think that was the DEMOCRATIC way solve this problem, let's all just talk about and maybe it will fix itself...
Sorry, it has been a long day and this email was the straw that broke my camel's back.
Does ANYONE know of a REAL email address where I can actually ask a REAL person for a replacement fan?
AND, SINCE I am here,. WHY was this a SEALED fan with OIL or GREASE in it in the first place? is UP with that?

Hi Stilly,
Did you notice this in the e-mail MSI sent you:
------------------------------------------------------------------------- We hope the directions below answer your question. If your problem still cannot be solved after going through all the suggestions, then you can reply this e-mail containing the automatic reply with your original e-mail. We will get back to you as soon as possible.
I don't know much about this, but you may be able to buy a comparable fan fron your local computer store - take the card in and ask the guy about it (I understand computer/graphics card fans are not very expensive).
It might be worth a try.
Of course, the card may not accept any other kind of fan - it all depends on how it attaches to the card.
If you do return the card to MSI there may be be postal charges etc. so the computer store MAY be your best, quickest, and cheapest option.
Anyway, it's up to you now - good luck and let us now how you get on.
Axel :D

Problems with WAS 6.40 Installation on Oracle - Phase 11 of 34

Hello,
Problems with WAS 6.40 Installation on Oracle (Phase 11 of 34)
with the installation of the Web Application server 6,40 SR1 on a Oracle server I get in phase 11 of 34 (Create Oracle Database) the following error-message:
CJS-00084 - SQL statement or script failed. Diagnosis: Error message: ORA-12547: TNS:lost contact.
error while loading shared library: libodm9.so : cannot open shared object file: No such file or dirctory.
Best Reagrds,
Ralf Steffens

hi Ralf
i've found one composite note for Oracle <a href="https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001366932002">505630</a>
hope this solves...
Symptom
ORA-12547: TNS:lost contact
Brbackup, brarchive, brrestore or brconnect may terminate with errors similar to the following:
BR301E SQL error -12547 at location BrDbConnect-1
BR301E SQL error -12547 at location dbf_info_get-1
Sapdba returns the following error, for example:
SAPDBA: ORACLE error -12547 occurred while checking instance status!
The R/3 work processes or R3trans return the following error at Connect:
C *** ERROR => CONNECT failed with sql error '12547'
Other terms
TNS-12547, TNS-00517
Reason and Prerequisites
As part of the Net8 Connect, a program such as the R/3 kernel, R3trans, svrmgrl, sqlplus or ODMA establishes a connection to the Oracle database. If the connection terminates due to problems at the server end, it can result in ORA-12547.
Additional information for the error is often available in sqlnet.log. In many cases, other messages that are not reported by all tools precede ORA-12547. If ORA-12547 occurs when the ODMA accesses the old Oracle-Home during a database upgrade, for example, it may make sense to temporarily restart ORACLE_HOME on the old Oracle-Home for test purposes and then to execute sqlplus or svrmgrl.
Even if sapdba or the BR tools terminate with an ORA-12547 when calling sqlplus or svrmgrl recursively, you should, for test purposes, call sqlplus or svrmgrl manually with the operating system user that was used.
Hopefully, a more informative error message will appear in addition to ORA-12547, for example:
ld.so.1: oracleC11: fatal: relocation error: file
 /oracle/C11/817_64/libx8.so: symbol ksunsga_:
 referenced symbol not found
If you find accompanying error messages of this type, start a note search with the corresponding search terms since we are often aware of the problem and a solution may already be available. If you do not find any significant error messages or a suitable note, check the following possible causes for ORA-12547:
1. UNIX: Incorrectly linked Oracle tools
2. UNIX: Problems with XPG4 compliance and s-bit
3. Too many requests to the listener at the same time
4. HP-UX, Oracle 8.1: Missing OS patch
5. Use of CRYPTO parameters in sqlnet.ora
6. AIX: I/O Async is deactivated
7. Resource problems
8. The CONNECT_TIMEOUT_LISTENER parameter in listener.ora is too low
9. Activated Oracle trace
10. UNIX: Incorrect oracle executable authorization
11. SOLARIS: LD_LIBRARY_PATH set when you call ODMA
12. AIX: Problem with post/wait kernel enhancement
13. UNIX: Problems with the libobk library
14. SOLARIS: Incorrect search sequence in the path variable
15. UNIX: Conflicts between 32-bit and 64-bit files
Solution
1. Relink the Oracle software as ora<sid> with
cd $ORACLE_HOME/rdbms/lib
make -f ins_rdbms.mk install
 or
relink all
1. See Note 88884.
2. If individual work processes terminate with ORA-12547 when you start an R/3 instance, See Note 131561.
3. See Note 399610.
4. You can set security parameters that begin with SQLNET.CRYPTO_ in sqlnet.ora as part of the Advanced Security Option. Oracle releases < 8.1.7 cannot process these parameters correctly and result in ORA-12547. In this case, delete these types of parameters from sqlnet.ora.
5. If I/O is deactivated on AIX Async, the Net8 Connect fails with ORA-12547. In this case, activate I/O Async by using smitty.
6. Insufficient resources such as available memory on the database server can cause ORA-12547. For more information, see 384839.
7. In individual cases, it may make sense to increase the CONNECT_TIMEOUT_LISTENER parameter in listener.ora (for example, by 5 seconds, so from 10 to 15). Although a value of 10 seconds should usually be sufficient to establish a connection.
8. Delete the log files written by the Oracle trace in accordance with Note 92537.
9. Check to see whether the executable in $ORACLE_HOME/bin has the "rwsr-s--x" authorizations and the ora<sid> owner and correct this if necessary.
10. If you call ODMA on SOLARIS as part of a database upgrade and if LD_LIBRARY_PATH is set explicitly (on the lib directory of the target release), calling the old Oracle software through ODMA may fail with ORA-12547. If you use the old ORACLE_HOME to list sqlplus or svrmgrl, you get the following error:
ld.so.1: oracle<sid>: fatal: relocation error:
 file /oracle/<sid>/817_64/libx8.so: symbol ksunsga_:
 referenced symbol not found
ORA-12547: TNS:lost contact
 In this case, permanently delete LD_LIBRARY_PATH from the environment. This does not have any negative effects since the libraries are automatically found in the correct directories as of Oracle 8.1.
 If problems occur with the post/wait extension on AIX, the following type of errors will be displayed:
exec(): 0509-036 Cannot load program oracleC11 because of the
following errors:
 0509-130 Symbol resolution failed for oracle because:
 0509-136 Symbol pw_post (number 2524) is not exported
 from dependent module /unix.
 0509-136 Symbol pw_wait (number 2525) is not exported
 from dependent module /unix.
 0509-136 Symbol pw_config (number 2526) is not exported
 from dependent module /unix.
 0509-192 Examine .loader section symbols with the
 'dump -Tv' command.
ORA-12547: TNS:lost contact
1. If the libobk library was created incorrectly, the following type of errors may occur:
/oracle/C11/817_64/bin/oracle: /sbin/loader:
 Fatal Error: Cannot map library libobk.so
/usr/lib/pa20_64/dld.sl: Unable to find library
 '/oracle/C11/lib64/libobk.sl
exec(): 0509-036 Cannot load program oracleC11 because of the
 following errors:
0509-150 Dependent module /oracle/C11/817_64/lib/libobk.a(shr.o)
 could not be loaded.
0509-152 Member shr.o is not found in archive
ORA-12547: TNS:lost contact
 Check to see whether libobk exists and, if it is a link, that it points to a valid object. Note 142635 contains more information about this. The libobk link may point to this if a libsbtsh8.* file exists in the Oracle library directory. If you are using a third-party Backint tool, contact the relevant supplier, since libobk often has to point to a backint-specific library.
1. If an error such as
ld.so.1: ./svrmgrl: fatal: libucb.so.1: open failed:
 No such file or directory
ORA-12547: TNS:lost contact
 occurs, the PATH has probably been set incorrectly. For more information, see Note 44361.
1. If an error such as
ld.so.1: oracle<sid>: fatal: <library> wrong ELF class: ELFCLASS64
ORA-12547: TNS:lost contact
 concerning "wrong ELF class" occurs, check whether the <library> mistakenly has a different bit size than the tool that was called. You can determine this using
file <library>
file <tool>
 All the files involved must uniformly be either 32-bit or 64-bit.

Regards
Arunkumar

Problem about D-link card installation on Solaris 8 intel

Similar Messages

Maybe you are looking for