Problem about deploying Enterprise DCs using CMS

hi everyone.
we currently are using NWDS04s sp10.
Using CMS, we transport development DCs to Product System.
However, Enterprise Portal DCs are not being tranmitted.
Other WDJ DC, Dic DC, ExtLib DC, etc. are well transferred.
Is it also possible to send Enterprise Portal DC over CMS?
If possible, pls let us know in which case the Enterprise Portal DC can't be transmitted.

Kindly check this link:
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/c5/56599164d0c04cb566ba0e2d7ed55c/frameset.htm">Transport of Portal objects</a>

Similar Messages

Deployment of DCs using JDI

Hi all,
Actually we had a product error in Personal Information of ESS,
( SAP note: 1027039) where, SAP suggested that modification can be made manually. So the told modification were done in Message Pool, i.e adding of the BizcardFields Messages.
Just following the SAP Notes, I did the so told modifications, build the project and when i try to deploy it ..
i am unable to track the status of deployment , and the changes are not getting reflected in the Portal also.
Am I missing any step here.Please let me know if I am doing something wrong.
Appreciate your valuable inputs..
Regards,
NR

Hi NR,
I'm assuming you have NWDI fully configured for track developments and changes? If so, you should use CMS to deploy this to the relevent server. Also, when doing NWDI developments, a safer practice is to deploy on a local engine before checking out your code to make sure everything is working fine.
Regards,
Raj

Problems about deploying Oracle web application (Forms, Reports)

I am going to deploy Oracle web applications (Forms and Reports) and plan to use the same server machine for both Application web server and Database server.
1. How can I enable SSL (for data encryption) on Application web server for Oracle Forms ?
2. Since both Application web server and Database server will use the same machine, do I still need Oracle Advanced Security for data transmission between Application web server and Database server if data encryption for transmission is required ?
3. Can I user Oracle Forms to call Oracle Report on web as I did in Client/Server in the past ?
Experts like you may have come across such problems. Would you please give me some opinions/ideas ?
Regards,
Richard

1. check the paper about the Forms servlet architecture on otn forms section for SSL tips.
3. Check the reports and forms integration paper on otn too.

Problems about trackpad+keyboard when using Leopard on Macbook Pro

I'm using Macbook Pro Multitouch 2.4 and I have two problems while using this laptop. have anyone same problem with me?
1- about trackpad: I 'm not usually using tapping trackpad, but when I try to use tapping trackpad for a while, trackpad cannot tap. So I must change to click trackpad. When I logging out or restarting, the trackpad can tap again.
2-about keyboard+trackpad: I sometime get freezing keyboard+trackpad excepting power button. But when I close the lid to sleep my laptop and open it again, it return normal but after a while it continue this problem.
I'm using Leopard v1.5.3 although 1.5.2 also have the same situations.
Anybody help me T_T

I found this solution elsewhere on the forum:
http://discussions.apple.com/thread.jspa?messageID=7245983&#7245983

Soap request with attachment --problem in deploye to jboss useing Jdevelope

using Jdeveloper and oc4j application server i made two application.
In application one i exposed a web service method.In this application their is a handler class which able to handle soap request and response with attachment.
In application two a client is sends a soap request with attachment.
If i deploye it in oc4j it is working fine. But if i Deploye to JBoss server [i made a jboss application server connection] and then trying to send the soap request with attachment from the client application i gets the following errors--
Exception in thread "main" javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused
     at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:152)
     at etrans.TripBean.a.ClientGateWay.msgEnvelope(ClientGateWay.java:50)
     at etrans.TripBean.a.ClientGateWay.main(ClientGateWay.java:60)
Caused by: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:148)
     ... 2 more
Caused by: javax.xml.soap.SOAPException: Message send failed: Connection refused
     at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:458)
     at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:865)
     ... 4 more
Caused by: java.net.ConnectException: Connection refused
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:516)
     at java.net.Socket.connect(Socket.java:466)
     at java.net.Socket.<init>(Socket.java:366)
     at java.net.Socket.<init>(Socket.java:208)
     at javax.net.DefaultSocketFactory.createSocket(SocketFactory.java:202)
     at HTTPClient.HTTPConnection.getSocket(HTTPConnection.java:3115)
     at HTTPClient.HTTPConnection.doConnect(HTTPConnection.java:3858)
     at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java:2921)
     at HTTPClient.HttpOutputStream.close(HttpOutputStream.java:421)
     at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.sendMessage(HttpSOAPConnection.java:724)
     at oracle.j2ee.ws.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:373)
     ... 5 more
Am i made any mistake to deploye to jboss or it is not possiable to access the web service in such way?
please suggest me what is the procedure to recover from this.

Hello,
How do you package you WS client application to be deployed in JBoss?
The JAX-RPC clients are not that portable you may need to recompile the client with JBoss WebService implementation/tools, and check that you do have the different deployment descriptors for the client too.
Regards
Tugdual Grall

I meet a problem about linking when I use Sharing Libraries.

I meet a problem when I use Sharing Libraries.
When I debug my flash on my local end, I can set the URL to "ShareLibrary.swf" (For “Export for runtime sharing”).
All Files linking the file "ShareLibrary.swf" are working correctly.
But When I put this swf on the net, the link can't work unless changing the URL to full path including the ip address.
Is there any way that I can make it work using the same URL, no matter the file is on the local or on the net?

Morning Alex,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iPhone: Sound muffled or low from the speaker or when speaking into the mic.
http://support.apple.com/kb/TS1631
Resolution
Check the following:
Check the volume setting on your iPhone. You can adjust the volume by pressing the volume up and down buttons on the left side of the iPhone.
If you are using a third-party iPhone case, make sure it is not covering the speaker, microphone, or top microphone. Try making some calls without the case to see if a caller can now hear you more clearly or play music to see if the speaker's volume is better.
If you have not removed the plastic display film used for protection during shipment, either ensure that the microphone and speaker are not covered or remove the film completely.
Check that the speaker, microphone mesh covers, and top microphone hole are not clogged with lint or other debris.
If the speaker, microphone mesh, or top microphone (iPhone 4 only) appear clogged, please use a clean, small, dry, soft-bristled brush to clean them. To do this follow these instructions:
Use the brush to carefully and gently brush the speaker and microphone mesh.
Brush away from the 30-pin dock connector to avoid getting any debris into the dock connector.
Hope this helps,
Mario

Problems with deploying cmproster example using ms sql server as database

hi to all,
im new to ejb and i like to learn by doing the examples given in the j2ee tutorial. i want to deploy the cmproster with a bit of modification...i want to use ms sql server as the database..i have configured the data source and connection pools correctly..and when i run the Client Application there is no error. The database seems fine it was populated correctly..only some of the values become null..
Here is the sample output from the client app:
P7 null null 777.0
P8 null null 65.0
P10 null null 100.0
P6 null null 555.0
P9 null null 100.0
The two columns should be strings...i look at the server.log and there where errors:
Error while getting value from resultset at index 2 as resultType 21columnSqlType=JDO76: 12.Exception java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index
I think thats the culprit...Can anyone help me on this? tnx
Note:
By the way im using sun.jdbc.odbc.JdbcOdbcDriver for the jdbc driver
Thanx
-oyam

Hi Michael,
At this time SQL Server 2000 is not certified for WLCS 3.5. Since the
schema has changed between 3.2 and 3.5, running the 3.2 scripts is not a
good idea.
I can tell you that certification is in progress for SQL Server 2000. Your
best bet is to contact your Sales Representative to get an idea of when
certification might be coming.
I hope this helps.
- Ginny
"Michael Schulz" <[email protected]> wrote in message
news:[email protected]..
I'm using WebLogic 6.0sp1 with Commerce Server 3.5 and I've successfully
installed the demo. I would like to create another commerce server
installation, this time using Microsoft SQL Server 2000 as the database
instead of Cloudscape. I've downloaded and installed the BEA jDriver
for MS SQL 7/2000 and tested it using dbping. My question is: where are
the db scripts for creating and populating the commerce database? I've
found the WLCS_320_DB_DDL_1.1.zip file on the BEA downloads site, but
I'm concerned that this schema is for Version 3.20 of Commerce Server.
Is there a similar file for WLCS 3.50? If not, is it safe to use this
one?
If this is posted in the wrong place, please let me know and I'll repost
to the appropriate newsgroup as required.
Sincerely,
Michael Schulz

About deploying sap adapter using ant

Can I use ant the deploy the sap adapter to j2ee server?

see if this can help
check
http://help.sap.com/saphelp_nw04/helpdata/en/21/76b7ab1c794502a6e2f9d79d23a398/frameset.htm

Problems about deploy a adapter.Who can help??

I confirm that the zip file path is right.I use the winrar to create the rar file,and use the winzip to create .sda file.
Who can help??Thanks very much
===========================================================================
Deployment started Wed Sep 13 13:54:19 GMT+08:00 2006
===========================================================================
Starting Deployment of cmbc.accenture.connector
Aborted: development component 'cmbc.accenture.connector'/'sap.com'/'SAP AG'/'7.0004.20050713150837.0000':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.DeployManagerException: com.sap.engine.services.deploy.container.DeploymentException: Cannot update archive file cmbc_ra.rarerror in opening zip file. Reason:
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Deployment of cmbc.accenture.connector finished with Error (Duration 5609 ms)

Hi Sky,
Please ensure that the content of cmbc_ra.sda is the following:
- META-INF (check in all files if all the names are comliant for your adapter structure)
- cmbc_ra.rar
In the cmbc_ra.rar
META-INF (check the content of ra.xml file)
cmbc_ra.jar
Hope this help.
Francesco Bersani

I have formatting problems when deploying Help files using RoboHelp 8

When i deploy the Help files. The formatting of the Numbering/bullets are affected and it is parts of the help files that i have not changed. Is there something else that i need to do to fix it?

More information needed to help you.
What sort of help are you generating?
Are you saying it is OK in Design Editor and not in a brower, if you are generating WebHelp? If yes, what browser and is it the same in all browsers?
There are some pages on Lists on my site.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Problems about create guest vm using office template in vm manager 3

in vm manager 2.2, we may pass "ip address, os root's password, vnc console password"\
But we can't pass them in vm manager 3.0.
after creating guest vm ,how login to guest os via console or vncviewer without password?

liyongz wrote:
But we can't pass them in vm manager 3.0.This is coming in a future version when we release the updated template configuration engine.
after creating guest vm ,how login to guest os via console or vncviewer without password?So is this.

Help! problem about jstl sql with "LIKE?" in query

Hi All,
I have a problem about getting data by using "LIKE" in my sql statment.
here is my case:
<sql:query var="tmp">
SELECT ...... FROM ...
WHERE a LIKE ?
<sql:param value="%${param.a}%"/>
</sql:query>
Once I used "LIKE" keyword, the query failed to use this critica.
and couldn't find any match cases
thx or help
Micheal

besides, i found that:
this works:
"AND a.block LIKE '%' + 'a' + '%'"
but these don't work:
"AND a.block LIKE '%' + 'a' + '' + '%'"
or
"AND a.block LIKE '' + '%' + 'cp' + '%'"
or
"AND a.block LIKE '%' + 'cp' + '%' + ''"
it seems '' is the casue of error... so strange, anyone has idea?
micheal

Deploying Applet which uses JCORBA

Hi,
I've a problem with deploying Applet, which uses JCORBA
application jcoSql (it's on OAS 4 on Windows NT). I need in
deploy directory package COM/visigenic/vbroker.. (because of
calling ObjectFactory) and com/swing/... (because of using
component JDialog in the Applet). But first direcory COM must be
in uppercase and second com in lowercase!! And that is problem
on NT. Could somebody help me?
Thanks,
Ales
null

You can make one (or both) of te packages available in a ZIP or
JAR file.
Thanks,
-Roel.
Ales Kemr (guest) wrote:
: Hi,
: I've a problem with deploying Applet, which uses JCORBA
: application jcoSql (it's on OAS 4 on Windows NT). I need in
: deploy directory package COM/visigenic/vbroker.. (because of
: calling ObjectFactory) and com/swing/... (because of using
: component JDialog in the Applet). But first direcory COM must
be
: in uppercase and second com in lowercase!! And that is problem
: on NT. Could somebody help me?
: Thanks,
: Ales
null

Problem deploying certain mappings using OMBPlus

We've got a problem deploying certain mapings using OMBPLus. This applies to all mappings that use a function to lookup the effective date of a SCD (type 2) from a lookup table. We use that function in the dimension operator properties as the "Default Effective Time of Open Record". Though the validation of those mappings fails they can nevertheless be deployed using the Control Center Manager. And, best of all, they work fine.
Now we have to deploy those mappings using OMBPlus because we're not allowed to work with tools on the preproduction and production systems. Deploying those mappings with OMBPlus doesn't seem to work. It works fine for all other mappings but not for those mentioned above. Has anybody a solution?
Regards,
Jörg

Hi Dave,
this is the error message I get whe I run my OMBPLus script:
OMB05602: An unknown Deployment error has occured for Object Type PUB03205 : Validation Error: MAP_DIM_FAHRZEUGKLASSE : VLD-5010: The Default Effective Date of open records for dimension DIM_FAHRZEUGKLASSE should be an expression of type DATE. Value "FCT_GET_AKT_LL_vmon()" is not a valid date: PLS-00201: identifier 'FCT_GET_AKT_LL_VMON' must be declared
I'm not quite sure about what you mean with creating a stub function. As you can see from the error message above I use a function called FCT_GET_AKT_LL_vmon that returns the actual date od the load from a lookup table. This function is of course present in the target schema.
Regards,
Jörg

Problem with deploying FPGA host VIs using TestStand deployment utility

I am using a PCI-7831R FPGA to control an automated test fixture. I have several host VI's that I am calling from TestStand (4.2.1) in order to control the 7831R. The host VI's that TestStand calls are setup as sub-VI's and are used for various things such as opening an FPGA reference (which is bound to a strict type def), downloading and executing the files on the 7831R, reading writing to controls, and finally closing the reference. In the sequence file, I am passing the reference values as a file global so that the host sub-VI's can communicate correctly. I have all functionality working correctly in TestStand on my development PC. When I go to deploy this to a production PC, I get errors when the sequence file trys to load the first host VI. The error basically states that the VI is broken - try to open and run it (which I can't because I have no development license on the production PC). I am currently trying to deploy this to another development PC to see if I can track down where the VI might be breaking.
I have included the lvbitx and strict type def control that the host subVI's reference in my deployment files. I can't think of anything that I might be missing. Is there any good documentation on exactly which files I need to include in the deployment when using FPGA Host VIs (the TestStand reference manual is pretty vague at best)? It seems that any documentation that I read says the TestStand deployment utility will analyze all VI dependencies (other than shared variables). On a side question, is the strict type def considered a shared variable?
Has anyone successfully deployed a sequence that calls host VI's? Any help would be greatly appreciated. If any of the above needs further clarification please ask away and I will be happy to give more details.
Thanks,
Mike

Hi hawkstringer
Do you encounter this problem using a deployed version of your code? Note that the subject of this topic is about deploying an FPGA application.
I forgot I posted here, in the mean time I've managed to deploy my application. I think my problem was solved when I included all necessary drivers and components (but I'm not absolutely sure). I included the following:
NI IVI Compliance Package
NI FlexRIO
NI PXI Platform Services Configuration Support
NI R Series Multifunction RIO
NI DAQmx Core Runtime
NI DAQmx MAX Configuration Support
NI RIO
Good luck!

Problem about deploying Enterprise DCs using CMS

Similar Messages

Maybe you are looking for