Problem about MuVo V200,PLX HELP ME

this is not the first time my mp3 player has problems,and i try to fix the problems by myself.i have already downloaded the files:
MStorage_PCDRV_LB__07_00_250
MuVoV200_PCFW_LF__05_02?after i pressed the play button and waited for 0 sec,
I still cannot reach the recovery mode and my computer cannot detect any new dri've.....when i double click the MuVoV200_PCFW_LF__05_02,
it cannot find my mp3 player
so i cannot repair my mp3....
PLX...HELP ME....

You have to install the Mass Storage drivers first.
Then press and hold the Play button while connecting the player to the PC.
Wait until the New Hardware Wizard starts (or fingers go numb if it doesn't start!)
Follow instructions
When complete run firmware upgrade file.
What were the original problems that caused you to try a firmware reload?
PB

Similar Messages

  • A Problem With Muvo V200 !!

    Hi everybody, I've bought a Muvo V200 GB, and it works well , less one thing:
    When the blue light is activated I feel a very "high-pitched" sound, and it's very unpleasant.
    Can somebody tell me if there is a firmware that fix that problem ?
    I've tried to format the usb flash but I still have this problem. And I've also seen some posts in other forums that complain about that.

    No, the problem is with the V200 hardware itself, not the headphones. But using a higher impedance phone results in this high frequency noise being greatly attenuated. Being a hardware issue, there is no possible firmware fix for this. The only option is to go to a higher impedance phone (the Koss KSC-75 sounds great and is available for $5 from amazon.com) or li've with the problem. You can of course set the player to have the backlight always off - this will also eliminate the problem except at startup but will make adjustments more difficult in the dark.

  • Problem With MuVo V200 after software upd

    Hi
    Today I buy a MuVo Gb,
    I check that the software ver. in the MP3 player
    was old.
    I download the file "MuVoV200_PCFW_LF__2_03.exe"
    and installede the file, No problem
    After the update I can NOT turn-on the mp3 player,
    and the pc can NOT see the MP3 in the USB port.
    So it is DEAD. Have can i wake-up the mp3 player ? again
    Regard
    Arne

    From the website, download and install the Mass Storage Drivers.
    Then, press and hold the Play button while connecting your player to the USB port of your PC. This is connecting your V200 in what is called Recovery Mode.
    Keep pressing the Play button until the New Hardware Wizard starts.
    Complete the wizard.
    When finished reload the firmware. If it doesn't work with the latest version then try one of the earlier version linked to in the thread in my signature line.
    PB

  • Problem about maintenance order, please help me to resolve it .thanks

    HI all,
            I have created a maintenance order by maintenance notification, and one of the operation sequences is external service. I selected a external service which was configured before. when  i saved it,it say: account 40060 have not been create yet(i did not enter any cost element ).
       regards

    Hello Subhakanth ,
       Message ID and content:
    ME042
    Diagnosis
    The G/L account is not defined in the system or for this company code.(I have defined the G/L account and assigned it to my company code already.)
    Procedure
    Make sure your entries are correct.
    Inform the individual or section responsible for G/L accounts in the relevant company code.
    thanks
    Message was edited by:
            cyan wang
    Message was edited by:
            cyan wang

  • Mac Mini and MuVo V200 problem

    I have Mac Mini .83 a few months now. Yesterday, I've, for the first time, tried to connect my MuVo V200 via USB. The problem is that Mac simply can't see MuVo at all!!! With other devices I have no problem. What I suppose to do?
    Thanks anyone who can help?

    Did you have the Mac before you bought the Muvo V 200? You should have read the box and listed requirements,if you bought this yourself. Below are the minumum requirements for the Muvo V 00 or 200.
    Intel Pentium II 350MHz or AMD K6 -2 450MHz http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif Microsoft Windows 2000/XP http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif 28 MB RAM http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif 70MB free hard disk space http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif CD ROM Drive http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif USB .
    luvmyrescuedogs

  • Muvo V200, question about the play m

    Hello,I have a question about the play mode on my V200. I want to play the songs in a specific order (like in a playlist) but I don't find the way to do this. Can you help me please ?
    Thanks
    (sorry if I don't speak english very well, but I'm french )

    Hi!
    To get the tracks to play in a specific order, put numbers at the beginning of each file name. E.g.: file 'examplesong.mp3' would become '0_ examplesong.mp3' Don't spend years doing that manually though; the computer will do it for you! Click on 'my computer', then click on 'Muvo V200 media explorer'.. This shows the contents of your player. Choose the folder that you want to reorder the songs in...
    ( it's best to put the songs in folders, like you would in a floppy disk, as the muvo can only hold a certain amount in the root directory, and folders are great for organisation - eg: you can put one CD in each folder, and then the player will play all of the tracks in that folder before moving on to the next one )
    ...and click on it to display the songs. In the pictures along the top of the window, 4th from the right is an icon with a downward facing arrow and an A above a Z. Click on this, it's called 'custom sort'. You can then use the arrows at the bottom to change the order of your tracks to how you want them. Click OK, and they'll all be numbered (and so will play) in that order.
    Hope that helps!
    x

  • HELP!!! MuVO V200 Fat32 NO RESPOND

    I have big problem. I have MuVo V200 and i format it using FAT32. My Mp3 no responding. I can't format it to FAT/FAT6. My?system:?WINDOWS XP SP2. PLIZ HELP
    !!! My mail: [url=mailto:[email protected]">[email protected][/url]

    Try putting the V200 into Recovery Mode first. This is done by holding the play button and then connecting the V200 to your PC via the USB port.
    When it is in Recovery Mode then try loading the V200 firmware.
    To put it into Recovery Mode you might need these drivers:
    http://uk.europe.creative.com/suppor...ame=Windows+XP
    Download and install these to your PC first.
    PBMessage Edited by PeeBee on 08-22-2005 05:36 PM

  • HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • My IPod no longer shuffles songs within playlists that are clearly set to shuffle.  It is about 3/4 full so I thought of maybe compressing the files to get more space.  Do you think that is the problem and if that might help?

    My IPod no longer shuffles songs within playlists that are clearly set to shuffle.  It is about 3/4 full so I thought of maybe compressing the files to get more space.  Do you think that is the problem and if that might help?

    Storage space on the iPod would not affect shuffled playlists or playlist shuffling, though substantially full iPods may wind up skipping songs on larger playlists after a while, and require a restart.  As for compressing the files themselves, you can automatically re-encode files to a lower bitrate by checking the box on the summary page when your iPod is connected to your PC/Mac.
    As for the shuffle problem, after restarting your iPod (hold the center button and Menu for a few seconds, until the Apple logo appears), make sure you're telling the iPod to shuffle the songs in a playlist by repeatedly clicking the center button until the Suffle Menu comes up, then scroll to the right to turn it on.  From that song forward, the playlists' contents should be shuffled every time the playlist ends, or is accessed from a new song.
    Shuffle does sometimes turn itself off, I've found, so double-check the setting is still on.  Also, iPods shuffle by randomly assigning a playlist order for your songs, which is different from traditional shuffle (on, say, iTunes or Windows Media Player, where the new song is determined at random upon the current track ending.  The iPod only chooses a random order of songs when you shuffle, to conserve battery life and queue up songs coming up on the playlist in the event of a shock).

  • MUVO V200 Help Required

    Hi,
    I recently purchased a MUVO V200 with 52 mb memory.
    My first problem was the FM radio would not work, but I have since put this down to it requiring more power from the batteries than standard music. Bit of a pain as my rechargable batteries, even when fully charged won't allow the FM radio to work. Is this normal?
    My main problem; is since reformating the dri've and loading new firmware, the player will only store 00 songs, the packaging advises 256 songs. Can anyone explain if there is anything I can do to enable me to load more songs.
    Any advice would be appreciated.
    Thanks
    James

    I have Uniross 770mAh, Energizer 850mAh and Hahnel 900mAh, all .2V and all work fine.
    You can convert the files you have to a different bit-rate using the Audio Converter function of MediaSource that came with your player. If you use MediaSource to rip your CDs then you can set it up to rip at a lower bit-rate right from the start.
    MediaSource and V200 Media Explorer also have a SmartFit function where the files can be reduced in size as you transfer them to your player, though this slows down the transfer process and you would have to do it again if you reloaded the same files again at a later date.
    If these are files from an online music store then you probably can't convert them directly because of the license issues, but you can burn them to an audio CD then re-rip them at a lower bit-rate. If you use a CD-RW then you don't end up wasting a load of CD-Rs.
    PB
    Message Edited by PeeBee on 0-27-2006 05:09 PM

  • Zen MuVo V200 problem

    My sister has the GB Zen MuVo V200 and hasn't filled the capacity yet, but the player won't allow her to put any more songs onto it.
    It pops up a message saying that: "Your Music Library is corrupted and cannot be recovered. MediaSource will now revert to your most recent back-up available. Would you like to continue? Yes/No."
    Even if I click Yes or No, I need to download some Microsoft jet pack software, I haven't a clue what it is!
    I checked the properties of the player, and it says that 604MB is used space, and the free space is 389MB, so I should be able to put more songs on there. I am confused as to where the space has disappeared to. When trying to transfer songs, an error message pops up and says there is a transfer error has occured while transferring this file, and so it cancels the transfer. I think it has something to do with the amount of space, but I am not sure.
    Sorry to be of a nuisance again, but is there anything that I can do?
    Thanks again,
    Vanessa.

    plum_juice0 wrote:
    My sister has the GB Zen MuVo V200 and hasn't filled the capacity yet, but the player won't allow her to put any more songs onto it.
    It pops up a message saying that: "Your Music Library is corrupted and cannot be recovered. MediaSource will now revert to your most recent back-up available. Would you like to continue? Yes/No."
    Even if I click Yes or No, I need to download some Microsoft jet pack software, I haven't a clue what it is!
    I checked the properties of the player, and it says that 604MB is used space, and the free space is 389MB, so I should be able to put more songs on there. I am confused as to where the space has disappeared to. When trying to transfer songs, an error message pops up and says there is a transfer error has occured while transferring this file, and so it cancels the transfer. I think it has something to do with the amount of space, but I am not sure.
    Sorry to be of a nuisance again, but is there anything that I can do?
    Thanks again,
    Vanessa.
    As SSR has said, the PC Music Library error is a MediaSource problem.
    The reason that you haven't managed to fill up your player is covered in SSR's FAQ post. Look for a section titled "I can't seem to fit any more files on my flash player yet I have free space, why?".
    PB

  • Help! problem about jstl sql with "LIKE?" in query

    Hi All,
    I have a problem about getting data by using "LIKE" in my sql statment.
    here is my case:
    <sql:query var="tmp">
    SELECT ...... FROM ...
    WHERE a LIKE ?
    <sql:param value="%${param.a}%"/>
    </sql:query>
    Once I used "LIKE" keyword, the query failed to use this critica.
    and couldn't find any match cases
    thx or help
    Micheal

    besides, i found that:
    this works:
    "AND a.block LIKE '%' + 'a' + '%'"
    but these don't work:
    "AND a.block LIKE '%' + 'a' + '' + '%'"
    or
    "AND a.block LIKE '' + '%' + 'cp' + '%'"
    or
    "AND a.block LIKE '%' + 'cp' + '%' + ''"
    it seems '' is the casue of error... so strange, anyone has idea?
    micheal

  • My apple ID was hacked and a game by GodGame Inc was bought and installed. When I try to report a problem about this transaction, the link automatically sends me to the apple store support. The application is bugged. Please help.

    My apple ID was hacked and a game by GodGame Inc was bought and installed. When I try to report a problem about this transaction, the link automatically sends me to the apple store support. The application is bugged. Please help.

    thanks for your response roaminggnome. I changed my password immediately after it happened and I have contacted i tunes to let them know of this dillemma.
    The I-tunes credit was a promotional thing by Apple to buy their laptop. So I didn't pay for the i-tunes credit in the first place. Do you think my bank will be able to reinburse Itunes credit then? I will ask support when they get back to me.

  • Help!! Dead MuVo V200

    I recently brought MuVo V200 G
    And I have on the screen this message "file sis eror" then it shut down
    I try to connect on usb but my computer did not detect this hardware
    so i could not format or do anything
    Then I try on laptop and...nothing same result (
    Pls i'm desperate HElp me I have this device for only a day and
    now is not working ....
    Any sugestion is good PLESE

    go back to the shop and get a new one, I think I read somwehere that you can get a new unit free of charge within a certain amount of time from day of purchase, might be mistaken though.

  • MuVo V200 serious problem

    Ive got my MuVo V200 like one and a half of month, and three days ago I was copying music on my MuVo, then after i left home i accidently dropped it from like m. And since that time when i listen to music it suddenly turns off after few minutes... What could happen? :| Nothing is broke...
    Anyone could help me? :|

    Go to this page, and click on the link for the .0.04 version. Then download the file from the page that appears. Then follow the instructions back on this page again to install the firmware.
    PB

Maybe you are looking for